Determination of formal potential of NADH/NAD+ redox couple and catalytic oxidation of NADH using poly(phenosafranin)-modified carbon electrodes

The electrochemical regeneration of NADH/NAD⁺ redox couple has been studied using poly(phenosafranin) (PPS)-modified carbon electrodes to evaluate the formal potential and catalytic rate constant for the oxidation of NADH. The PPS-modified electrodes were prepared by electropolymerization of phenosafranin onto different carbon substrates (glassy carbon (GC) and basal-plane pyrolytic graphite (BPPG)) in different electrolytic solutions. The formal potential was estimated to be ? 0.365 ± 0.002 V vs. SHE at pH 7.0. As for the bare carbon electrodes, the oxidation of NADH at the BPPG electrode was found to be enhanced compared with the GC electrode. For the PPS-modified electrodes, it was found that the electrocatalysis of PPS-modified electrodes for the oxidation of NADH largely depends on the carbon substrate and electrolyte solution employed for their preparation, i.e., the PPS-modified BPPG electrode prepared in 0.2 M NaClO₄/acetonitrile solution exhibits an excellent and persistent electrocatalytic property toward NADH oxidation in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of about 740 and 670 mV compared with those at the bare GC electrode and the PPS-modified GC electrode prepared in 0.2 M H₂SO₄ solution, respectively. A quantitative analysis of the electrocatalytic reaction based on rotating disk voltammetry gave the electrocatalytic reaction rate constants of the order of 10³–10⁴ M^?1 s^? 1 depending on the preparation conditions of the PPS-modified electrodes.     

Amperometric biosensing of glutamate using carbon nanotube based electrode

Amperometric biosensing of glutamate using nanobiocomposite derived from multiwall carbon nanotube (CNT), biopolymer chitosan (CHIT), redox mediator meldola’s blue (MDB) and glutamate dehydrogenase (GlDH) is described. The CNT composite electrode shows a reversible voltammetric response for the redox reaction of MDB at −0.15 V; the composite electrode efficiently mediates the oxidation of NADH at −0.07 V, which is 630 mV less positive than that on an unmodified glassy carbon (GC) electrode. The CNTs in the composite electrode facilitates the mediated electron transfer for the oxidation of NADH. The CNT composite electrode is highly sensitive (5.9 ± 1.52 nA/μM) towards NADH and it could detect as low as 0.5 μM of NADH in neutral pH. The CNT composite electrode is highly stable and does not undergo deactivation by the oxidation products. The electrode does not suffer from the interference due to other anionic electroactive compounds such as ascorbate (AA) and urate (UA). Separate voltammetric peaks have been observed for NADH, AA and UA, allowing the individual or simultaneous determination of these bioanalytes. The glutamate biosensor was developed by combining the electrocatalytic activity of the composite film and GlDH. The enzymatically generated NADH was electrocatalytically detected using the biocomposite electrode. Glutamate has been successfully detected at −0.1 V without any interference. The biosensor is highly sensitive, stable and shows linear response. The sensitivity and the limit of detection of the biosensor was 0.71 ± 0.08 nA/μM and 2 μM, respectively.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

NADH oxidation on screen-printed electrode modified with a new phenothiazine diazonium salt

NADH oxidation catalysts are extremely important in the field of electrochemical biosensors and enzymatic biofuel cells. Based on the growing diazonium chemistry, we synthesized the diazonium salt of the well-known NADH mediator toluidine blue O. The electrochemical reduction of the diazonium moiety by cyclic voltammetry onto a screen-printed electrode leads to an electrocatalyst suitable for the oxidation of NADH. The amperometric response for its oxidation shows a maximal current of 1.2 μA ([NADH] = 100 μM). Based on electrochemical measurements, the surface coverage is found to be 3.78 × 10^? 11 mol cm^? 2 and the heterogeneous standard rate constant k_h is 1.21 ± 0.16 s^? 1. The sensitive layer for the oxidation of NADH is improved by electrografting the diazonium salt with a potentiostatic method. Both the surface coverage and the heterogeneous standard rate constant k_h are improved and found to be 6.08 ± 0.63 × 10^? 11 mol cm^? 2 and ~ 5.02 s^? 1, respectively. The amperometric response is also improved by an 8 fold factor, reaching 9.87 μA ([NADH] = 120 μM). These remarkably high values for screen-printed electrodes are comparable to glassy carbon electrodes making this method suitable for low-cost bioelectronical devices.     

Direct determination of arsenate based on its electrocatalytic reduction at the poly(aniline-co-o-aminophenol) electrode

It was found that the copolymer poly(aniline-co-o-aminophenol) (PANOA) can strongly catalyze the reduction of arsenate in a NaCl solution, which was proved by cyclic voltammetry and the determination of activation energy. On the basis of the electrocatalytic reduction of arsenate, the PANOA copolymer was used as a probe to determine directly arsenate. The electrocatalytic activity of the PANOA electrode toward As(V) reduction strongly depended on the pH and the applied potential. Under the optimal conditions, the PANOA electrode can be used to determine directly As(V) concentration in a wide linear range (n = 19) of 0.949 and 495 μM with a correlation coefficient of 0.995 and a limit of detection of 0.495 μM. The sensitivity of the electrode was 0.192 μA μM^?1 cm^?2. The PANOA electrode had the good storage stability and a less negative operation potential of ?0.15 V (vs. SCE).     

Cathodic supply of electrons to living microbial cells via cytocompatible redox-active polymers

Redox-active polymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) and redox-active units are a new category of cytocompatible electron mediators which possess permeability of cell membranes. However, supply of electrons to living cells through the cytocompatible redox polymers has not been achieved so far due to the high redox potential of the redox polymers. Here we report that electrons were successfully supplied from a cathode into Escherichia coli cells, generating the current density of 7.8 μA cm^− 2 at − 0.40 V vs. SHE. It was also revealed that the cytocompatibility of viologen was improved simply by co-polymerization with MPC.     

Dual-signal anodic stripping voltammetric determination of trace arsenic(III) at a glassy carbon electrode modified with internal-electrolysis deposited gold nanoparticles

A glassy carbon electrode (GCE) modified with internal-electrolysis deposited gold nanoparticles (AuNPs_ied) was applied to sensitively and selectively detect As(III) by anodic stripping linear sweep voltammetry (ASLSV). The AuNPs_ied/GCE was prepared based on the redox replacement reaction between a supporting-electrolyte-free aqueous HAuCl₄ and a copper sheet in saturated KCl separated by a salt bridge. Under optimum conditions (0.5 M aqueous H₂SO₄, 300-s preconcentration at − 0.4 V), the ASLSV peak current for the As(0)–As(III) oxidation responded linearly to As(III) concentration from 0.02 to 3 μM with a limit of detection (LOD) of 0.9 nM (0.07 μg L^− 1) (S/N = 3), while that for the As(III)–As(V) oxidation was linear with As(III) concentration from 0.02 to 1 μM with a LOD of 4 nM (0.3 μg L^− 1) (S/N = 3). An appropriate high-scan-rate for ASLSV can enhance both the sensitivity and signal-to-noise ratio. This method was applied for analyses of As(III) in real water samples.     

Catharoseumine,a new monoterpenoid indole alkaloid possessing a peroxy bridge from Catharanthus roseus

Catharoseumine (1), a new monoterpenoid indole alkaloid possessing a unique peroxy bridge moiety, was isolated from the whole plants of Catharanthus roseus. Its structure was elucidated on the basis of NMR, IR, UV, and high-resolution mass spectrometric data, and its absolute configuration was determined by ECD and chemical methods. Catharoseumine (1) exhibited cytotoxicity against HL-60 cell line with IC₅₀ value of 6.28 μM and potential inhibition against Plasmodium falciparum falcipain-2 (IC₅₀ = 4.06 μM). A plausible biogenetic pathway of 1 was also proposed.     

Electrochemical synthesis of Au/polyaniline–poly(4-styrenesulfonate) hybrid nanoarray for sensitive biosensor design

Au/polyaniline (PANI)–poly(4-styrenesulfonate) (PSS) hybrid nanoarray is fabricated for biomolecular sensing in neutral aqueous solutions. Firstly, an array of one-dimensional Au nanorods (diameter = ca. 200 nm, length = ca. 3 μm) is formed by a template-electrodeposition method using a porous anodic alumina membrane, and then a thin PANI–PSS composite layer is electropolymerized on the surface of the Au nanorods. The resulting Au/PANI–PSS hybrid nanoarray exhibits a quasi-reversible redox electrochemical process at ca. +0.11 V and electrocatalytic oxidation of reduced β-nicotinamide adenine dinucleotide (NADH) is attained with a detection limit of 0.3 μM in a neutral solution.     

Pharmacoinformatics study of Piperolactam A from Piper betle root as new lead for non steroidal anti fertility drug development

Fertility control is a burning problem all over the world to regulate population overflow and maintain ecological balance. This study is an in-silico approach to explore a non-steroidal lead as contraceptive agent in order to avoid several contraindications generated by steroidal analogues. Piperolactam A, an aristolactam isolated from Piper betle Linn. showed binding affinity towards estrogen and progesterone receptor as −8.9 and −9.0 Kcal/mol (inhibition constant K_i = 0.294 μM and 0.249 μM) respectively which is even larger than that of reported antagonists such as Rohitukine and OrgC (binding affinity −8.7 and −8.4 Kcal/mol; K_i 0.443 μM and 0.685 μM respectively). The binding site exploration displayed more hydrogen bonding of Piperolactam A (His 524, Leu 346, Thr 347) than Rohitukine and OrgC (Leu 718) with associated receptors which was further confirmed by molecular dynamics simulations. The drug-likeliness of the compound has been proved from its tally with Lipinsky’s Rule of Five and lowered toxicity such as cardiac toxicity, liver toxicity, mutagenicity and ecological toxicity. Endocrine disruptome and later docking guided molecular simulations revealed that Piperolactam A has weaker binding affinity and/or lower probability of binding with nuclear receptors especially hERG and cytochrome P450. The high Caco-2 permeability suggested more bioavailability hence more therapeutic efficacy of the drug.     

Looking glass inhibitors: both enantiomeric N-benzyl derivatives of 1,4-dideoxy-1,4-imino-d-lyxitol [a potent competitive inhibitor of α-d-galactosidase] and of 1,4-dideoxy-1,4-imino-l-lyxitol [a weak competitive inhibitor of α-d-galactosidase] inhibit naringinase,an α-l-rhamnosidase competitively

Benzhydryl protection by diphenyldiazomethane of an alcohol in enantiomeric base-sensitive ribonolactones allows short efficient syntheses of 1,4-dideoxy-1,4-imino-d-lyxitol (DIL) and of 1,4-dideoxy-1,4-imino-l-lyxitol (LIL). DIL showed potent [K_i = 0.13 μM]—and LIL showed weak [K_i = 113 μM]—competitive inhibition of α-d-galactosidase. Both enantiomers N-benzyl-DIL [K_i = 64 μM] and N-benzyl-LIL [K_i = 13 μM] were moderate competitive inhibitors of naringinase, an α-l-rhamnosidase.     

Spontaneous formation of an electroactive co-polymeric film derived from nordihydroguaiaretic acid and 4,4′-diaminobibenzyl

Binary solution of nordihydroguaiaretic acid (NDGA) and 4,4′-diaminobibenzyl (DABB) undergoes rapid oxidation by ambient oxygen to form a thin film of poly-NDGA-co-DABB on the surface of the reaction chamber and on immersed substrates. Electrochemistry of thus formed films was studied in 0.1 M sulfuric acid and in phosphate buffer (pH 7.4). Electrochemical behavior of the co-polymeric film is characterized by two redox couples, the predominant one being observed at more negative potentials comparing to parent NDGA i.e. 0.28 vs. 0.49 V (vs. Ag/AgCl) in 0.5 M H₂SO₄. The peak potentials were shifted toward lower values with solution pH at the rate of 59 mV/pH unit indicating a 2e/2H⁺ transition as expected for quinone-containing films. The poly-NDGA-co-DABB film exhibits catalytic activity toward electroreduction of nitrite to nitric oxide in acidic electrolytes. This reaction can be used to quantify nitrite in a broad concentration range with low detection limit (0.3 μM, S/N = 3).     

Single microparticle applied in magnetic-switchable electrochemistry

In this work we demonstrated the micromanipulation of a single magnetic microparticle (Fe₃O₄) modified with Prussian blue (PB) for use in magnetic-switchable electrochemistry. A single Fe₃O₄-PB microparticle with 120 μm was isolated in an electrochemical microcell (20 μL), in which a fine control of PB electrochemical process on carbon electrode (Ø = 4.0 mm) was obtained. For cyclic voltammetry, redox processes attributed to PB/PW (Prussian blue/Prussian white) one electron redox couple were observed, however the capacitive currents were very high. On the other hand, by using differential pulse voltammetry, a maximum faradaic current for anodic peak of 200 nA cm^− 2 at 0.06 V was observed. Several and high stable chronoamperograms were obtained by “switch on” and “switch off” magnetic commutative states for a single microparticle, showing that the system developed here can be very promising for application in electrochemistry.     

Cyclometallated ruthenium(III) complexes: Synthesis,structure and properties

Reactions of Schiff bases (H₂apahR) derived from acetophenone and acid hydrazides, triethylamine and [Ru(PPh₃)₃Cl₂] (1:2:1 mole ratio) in methanol provide cyclometallated ruthenium(III) complexes of formula trans-[Ru(apahR)(PPh₃)₂Cl] in 74–81% yields. The complexes have been characterized by elemental analysis, magnetic susceptibility, spectroscopic (infrared, electronic and EPR) and electrochemical measurements. X-ray crystal structures of two representative complexes have been determined. In each complex, the metal centre is in distorted octahedral CNOClP₂ coordination sphere assembled by the C,N,O-donor meridionally spanning apahR^2?, the chloride and the two mutually trans-oriented PPh₃ molecules. All the complexes are one-electron paramagnetic (μ_eff. = 1.85–1.98 μ_B) and display rhombic EPR spectra in frozen (120 K) dichloromethane-toluene (1:1) solution. Electronic spectra of the complexes display several absorptions within 470–270 nm due to ligand-to-metal charge transfer and ligand centred transitions. The complexes are redox active and display a Ru(III) → Ru(II) reduction and a Ru(III) → Ru(IV) oxidation in the potential ranges ?0.66 to ?0.70 V and 0.75 to 0.80 V (vs. Ag/AgCl), respectively.     

Electrochemical synthesis of a ferrocenecarboxylic acid–C60 composite and its electrocatalysis to hydrogen peroxide

A new ferrocenecarboxylic acid–C₆₀ composite (Fc–C₆₀) has been synthesized by controlled potential electrolysis. A composite modified glassy carbon electrode has been prepared based on its good electrochemical activity. The modified electrode in 0.1 M NaClO₄ solution shows a reversible oxidation wave at E_1/2 = 0.32 V (vs. SCE) attributed to the oxidation of the ferrocene entity and a quasi-reversible reduction wave of C₆₀ entity at E_1/2 = ?0.54 V (vs. SCE). Electrocatalytic studies show that Fc–C₆₀ at the modified electrode can mediate the reduction of hydrogen peroxide (H₂O₂), and a broad linear range from 1.2 μM to 21.9 mM for H₂O₂ were obtained with a determination limit of 2.5 × 10^?7 M by amperometry.     

A dysprosium nanowire modified carbon paste electrode for determination of levodopa using fast Fourier transformation square-wave voltammetry method

A new detection technique called the fast Fourier transform square-wave voltammetry (FFT-SWV) is based on the measurements of electrode admittance as a function of potential. The response of the detector (microelectrode) is fast, which makes the method suitable for most applications involving flowing electrolytes. The carbon paste electrode was modified by nanostructures to improve better sensitivity. The response is generated by a redox processes. The redox property of L-dopa was used for determination of it in human serum and urine samples. The support electrolyte that provided a more defined and intense peak current for L-dopa determination was at 0.05 mol l^?1 acetate buffer pH 7.0. Synthesized dysprosium nanowires make more effective surface like nanotubes [1], [2], [3], [4] so they are good candidates for using as a modifier for electrochemical reactions. The drug presented one irreversible oxidation peaks at 360 mV versus Ag/AgCl by modified nanowire carbon paste electrode which produced high current and reduced the oxidation potential about 80 mV.Furthermore, signal-to-noise ratio has significantly increased by application of discrete fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. To obtain the much sensitivity the effective parameters such as frequency, amplitude and pH was optimized. As a result, C_DL of 4.0 × 10^?9 M and an LOQ of 7.0 × 10^?9 M were found for determination for L-dopa. A good recovery was obtained for assay spiked urine samples and a good quantification of L-dopa was achieved in a commercial formulation.     

Novel poly (neutral red) nanowires as a sensitive electrochemical biosensing platform for hydrogen peroxide determination

Poly (neutral red) nanowires (PNRNWs) have been synthesized for the first time by the method of cyclic voltammetric electrodeposition using porous anodic aluminum oxide (AAO) template and were examined by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Moreover, horseradish peroxidase (HRP) was encapsulated in situ in PNRNWs (denoted as PNRNWs–HRP) by electrochemical copolymerization for potential biosensor applications. The PNRNWs showed excellent efficiency of electron transfer between the HRP and the glassy carbon (GC) electrode for the reduction of H₂O₂ and the PNRNWs–HRP modified GC electrode showed to be excellent amperometric sensors for H₂O₂ at −0.1 V with a linear response range of 1 μM to 8 mM with a correlation coefficient of 0.996. The detection limit (S/N = 3) and the response time were determined to be 1 μM and <5 s and the high sensitivity is up to 318 μA mM⁻¹ cm⁻².     

Electrochemical detection of perchloroethylene using differential pulse voltammetry

We demonstrate the application of differential pulse voltammetry (DPV) for the electrochemical detection of perchloroethylene (PCE) on an unmodified glassy carbon electrode surface. Detection sensitivity was substantially improved using DPV, in which dechlorination was denoted by a cathodic peak observed at approximately − 0.6 V (vs Ag/AgCl). Peak current intensity was found to correlate linearly with concentration over a tested range of 0 to 10 μM. The utility of this technique was subsequently evaluated for PCE-spiked environmental samples containing either Methylobacterium adhaesivum (1 × 10⁶ cells/mL) or creek water (10% v/v). In all environmental samples, a linear dynamic range was also observed from approximately 0 to 10 μM. The limit of detection was determined to be 0.3 μM in blank buffer, 0.4 μM in bacteria-containing samples and 1.2 μM in creek water samples.     

Mesoporous silica thin films for molecular sieving and electrode surface protection against biofouling

Electrode fouling is a major challenge for the long term use of sensors in real samples as it leads to the decay of the electroanalytical signal and is often caused by the formation of an inhibiting layer formed by biomolecules. We demonstrate here that ordered and vertically aligned mesoporous silica generated at the surface of an indium tin oxide electrode by electrochemically assisted self-assembly act as a molecular sieve and a protective layer for the electrode surface. They indeed prevent the adsorption of size excluded large undesired molecules (e.g. haemoglobin) while allowing the detection of small redox active molecules likely to reach the electrode surface through the film (e.g. propranolol) with almost no loss of sensitivity. At a bare electrode, the oxidation of propranolol is completely inhibited in the presence of 5 μM haemoglobin. At a modified electrode, the sensitivity for propranolol in the absence of haemoglobin is (72.8 ± 2.9) mA mol^− 1 (R² = 0.992, N = 7) and it remains similar in the presence of 5 μM haemoglobin with a value of (67.4 ± 7.2) mA mol^− 1 (R² = 0.992, N = 7).     

Carbon black as successful screen-printed electrode modifier for phenolic compound detection

We report a miniaturized and disposable electrochemical sensor for phenolic compound detection. The sensor was constructed by modifying the working electrode surface of screen-printed electrode (SPE) with carbon black (CB) dispersion. This new probe showed higher sensitivity and better resistance to fouling than the bare SPE, displaying the suitability of CB as an excellent nanomodifier of SPE for phenolic compound detection. Catechol, gallic acid, caffeic acid, and tyrosol were detected by square wave voltammetry with a detection limit of 0.1 μM, 1 μM, 0.8 μM, and 2 μM, respectively. The sensor was able to selectively discriminate the mono-phenols and ortho-diphenols with rapid and easy measurement, paving the way to use a cost-effective device for quality control of foods and beverages containing phenolic compounds.