Computational simulations of pore nucleation in silicon(1 1 1)

Float zone n-Si(1 1 1) was electrochemically etched in diluted NH₄F to form porous nuclei. The experimental results were compared with computational simulations of pore nucleation and growth. Electrochemical etching of silicon(1 1 1) results in pore nucleation preferentially localized on the edges of atomic terraces. The initial pore nuclei have diameter and depth of 17 nm and 0.3 nm, respectively. We find a correlation between H-terminated Si(1 1 1) atomic surface morphology and electric field distribution on pore nucleation and growth mechanism. The H-terminated surface is composed from wide (100–200 nm) atomic terraces with steps of 0.3 nm height. Electric field enhancement occurs at the terrace edges leading to focusing the holes trajectories. This leads to weakening of the Si–Si backbonds resulting in easy atom removing. The maximum electric field was observed at terrace edges and at the semispherical pore bottom.     

Electrochemical deposition of PbTe onto n-Si(1 0 0) wafers

Electrochemical deposition of PbTe from 50 mM Pb(NO₃)₂ + 1 mM TeO₂ + 0.1 M HNO₃ solution onto n-Si(1 0 0) wafers was studied using cyclic voltammetry (CV), chronoamperometry, ex situ SEM, XRD and EDX. Electrochemical behavior of n-Si(1 0 0) electrode in electrolytes 50 mM Pb(NO₃)₂ + 0.1 M HNO₃ and 1 mM TeO₂ + 0.1 M HNO₃ was also studied. No underpotential deposition (UPD) of Pb and Te onto n-Si was observed in the investigated systems indicating weak Pb–Si and Te–Si interactions. Deposition of Pb and Te on n-Si occurred with overvoltage via 3D island growth. Electrosynthesis of PbTe (NaCl-like structure, a = 0.650 nm) takes place due to codeposition of Pb and Te at potentials E > E_{Pb²⁺/Pb⁰} (lead UPD onto tellurium). Cathodic deposition of PbTe onto n-Si(1 0 0) is irreversible – there is no anodic current in the CV curve. Oxidation of PbTe on n-Si is observed only under illumination, when photoelectrons and photoholes are generated in silicon substrate.     

Comparative theoretical study of the structure and bonding of propyne on the Pt(1 1 1) and Pd(1 1 1) surfaces

The interaction of propyne with the Pt(1 1 1) and Pd(1 1 1) surfaces has been studied by means of the generalised gradient approach of density functional theory using periodic slab models. For both surfaces, the most stable adsorption mode of propyne is di-σ/π mode where the hydrocarbon is σ-bonded to two metal atoms with some additional π bonding to a third adjacent surface atom. The adsorption geometry is a highly distorted propyne with the C₁ and C₂ in a nearly sp² hybridisation. Two equivalent surface structures have been found on Pt and Pd. These correspond to the adsorption on the fcc or hcp hollow sites. The adsorption energies on Pt(1 1 1) and Pd(1 1 1) are predicted to be ∼−197 and −161 kJ mol⁻¹, respectively. The electronic factors that control the chemisorption have been analysed by means of the projected density of states.     

UV laser induced photo-response from the structure-sensitive adsorption of lactic acid on Pt(1 1 1)

UV irradiation (266 nm) from a nano-second pulsed laser induced a transient photo-current on Pt(1 1 1) electrode when it is contacted to an aqueous solution containing lactic acid. The potential dependence of this photo-current and the potentiodynamic behavior in the dark suggested that this electrocatalytic oxidation proceeds under the dual-path mechanism. This photo-response also revealed a potential dependence of the coverage of a short-lived adsorption intermediate.     

In situ scanning tunneling microscopy imaging of mercury film electrodeposited on Ir(1 1 1)

In situ scanning tunneling microscopy (STM) was used to examine multilayer Hg film electrodeposited on a well-ordered Ir(1 1 1) single crystal electrode in 0.1 M HClO₄ + 1 mM Hg(ClO₄)₂. Topography STM scans showed that the Ir(1 1 1) – supported Hg film electrode contained well-defined terraces separated by monatomic steps (Δz = 2.3 Å). The STM’s tip could be used to induce local dissolution of the Hg deposit under proper operating conditions and the depth of the etched pit informed directly the thickness of Hg deposit. Although in situ STM imaging with a tungsten tip could not result in atomic structure of bare Hg film in 0.1 M HClO₄, it discerned highly ordered iodine adlayers, represented by a (2 × 8√3)rect – I structure, on the Hg film in solution containing potassium iodide. These STM results suggested that the Hg substrate could have an ordered atomic structure.     

Spontaneous deposition of Sn on Au(1 1 1). An in situ STM study

The tin adlayer formed by spontaneous deposition on Au(1 1 1) was characterized by cyclic voltammetry and in situ scanning tunneling microscopy (STM) in sulphuric acid solution. Cyclic voltammetry measurements showed oxidation peaks in the potential range −0.60 ⩽ E/V vs SSE ⩽ 0, which can be ascribed to the dissolution of the Sn adsorbed layer. STM images of the Au(1 1 1)/Sn modified surface showed that tin nucleated both on step edges and on the flat terraces forming two-dimensional islands. The anodic polarization of this modified surface produced the gradual dissolution of the Sn adlayer which was evidenced by the formation of some holes and the reduction of the initial terraces to many small islands. STM images with atomic resolution obtained on these islands displayed an hexagonal expanded atomic structure. After the anodic stripping of this Sn adsorbed layer the images exhibited the typical Au(1 1 1) terraces with a (1 × 1) atomic structure. However, at more anodic potentials another dissolution process was observed producing noticeable changes on the surface morphology which could be ascribed to the dissolution of a Au–Sn surface alloy.     

Physicochemical properties of {1-methyl piperazine (1) + water (2)} system at T = (298.15 to 343.15) K and atmospheric pressure

Densities (ρ) and viscosities (η) of aqueous 1-methylpiperazine (1-MPZ) solutions are reported at T = (298.15 to 343.15) K. Refractive indices (n_D) are reported at T = (293.15 to 333.15) K, and surface tensions (γ) are reported at T = (298.15 to 333.15) K. Derived excess properties, except excess viscosities (Δη), are found to be negative over the entire composition range. The addition of 1-MPZ reduces drastically the surface tension of water. The temperature dependence of surface tensions is explained in terms of surface entropy (S^S) and enthalpy (H^S). The measured and derived properties are used to probe the microscopic liquid structure of the bulk and surface of the aqueous amine solutions.     

Study on continuous (254 nm) and pulsed UV (266 and 355 nm) lights on BVD virus inactivation and its effects on biological properties of fetal bovine serum

Both continuous UV lights and pulsed UV lasers have potentials to inactivate known and emerging viruses. Bovine viral diarrhea virus (BVDV), from the Pestivirus genus, is known to be a common viral contamination in (fetal) bovine serum (FBS). Also, BVDV has been used in the blood product industry as a surrogate for Hepatitis C virus (HCV), due to its similarity in structure and genome. Germicidal UV lamp with the wavelength of 254 nm and Nd:YAG laser (pulsed UV laser) in its third and fourth harmonic with the wavelengths of 355 and 266 nm, respectively, were used. BVDV suspended in PBS or FBS were exposed to different intensities and doses and then reduction in BVDV titer were calculated. To complete inactivation of BVDV suspended in PBS and PBS containing 5% FBS, 1.6 (t = 30 min) and 3.2 (t = 60 min) J/cm² were used. The minimum doses for inactivation of BVDV suspended in PBS with the 355 and 266 nm of pulsed UV laser were 352 and 92.25 J/cm². Also, the minimum doses for inactivation of BVDV suspended in FBS with 355 and 266 nm wavelengths of pulsed UV laser were 704 and 127 J/cm². To evaluate the irradiated FBS quality to support cell culture growth, FBS was treated with the dose of 190.5 J/cm² and 266 nm pulsed UV laser and was used to grow Vero cells, in comparison with a control group. The viability of cells in two groups was identical and the statistical evaluation showed no significant difference in 12 passages.     

Stability of underpotentially deposited Ag layers on a Au(1 1 1) surface studied by surface X-ray scattering

Stability of underpotentially deposited (upd) Ag layers on Au(1 1 1) surface was investigated by surface X-ray scattering (SXS). While the complete pseudomorphic Ag bilayer on Au(1 1 1) surface obtained by upd at 10 mV (vs. Ag/Ag⁺) was maintained its structure even after the circuit was disconnected and the surface was exposed to ambient atmosphere, the pseudomorphic Ag monolayer obtained by upd at 50 mV was converted to a partial bilayer with the coverage of 0.66 and 0.46 ML for the 1st and 2nd layer, respectively. These results show that Ag bilayer is structurally more stable than Ag monolayer on Au(1 1 1) and Ag atoms of the upd monolayer move around on the Au(1 1 1) surface without potential control.     

Hot band spectroscopy of CCO in the C–O stretching region: The (ν1 + 2ν3) − 2ν3 and (2ν1 + ν3) − (ν1 + ν3) bands

Two C–O stretching hot bands, (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), of the CCO radical in the ground electronic state were measured. These hot bands are red shifted by approximately 70 cm⁻¹ compared to the C–O stretching fundamental. CCO was produced in a discharge through a flowing mixture of carbon suboxide and helium. The spectra were recorded using a diode laser spectrometer. The band origins were determined to be 1904.32512(62) and 1902.69130(56) cm⁻¹ for (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), respectively. The measurements in this band together with previously reported frequencies in the C–C and C–O stretching regions were analysed to determine harmonic frequencies and anharmonicity constants.     

Light-induced spin crossover in Fe(II)-based complexes: The full photocycle unraveled by ultrafast optical and X-ray spectroscopies

The light-induced spin and structure changes upon excitation of the singlet metal-to-ligand charge transfer (¹MLCT) state of Fe(II)-polypyridine complexes are investigated in detail in the case of aqueous iron(II)-tris-bipyridine ([Fe^II(bpy)₃]²⁺) by a combination of ultrafast optical and X-ray spectroscopies. Polychromatic femtosecond fluorescence up-conversion, transient absorption studies in the 290–600 nm region and femtosecond X-ray absorption spectroscopy allow us to retrieve the entire photocycle upon excitation of the ¹MLCT state from the singlet low-spin ground state (¹GS) as the following sequence: ^1,3MLCT → ⁵T → ¹GS, which does not involve intermediate singlet and triplet ligand-field states. The population time of the HS state is found to be ～150 fs, leaving it in a vibrationally hot state that relaxes in 2–3 ps, before decaying to the ground state in 650 ps. We also determine the structure of the high-spin quintet excited state by picosecond X-ray absorption spectroscopy at the K-edge of Fe. We argue that given the many common electronic (ordering of electronic states) and structural (Fe–N bond elongation in the high-spin state, Fe–N mode frequencies, etc.) similarities between all Fe(II)-polypyridine complexes, the results on the electronic relaxation processes reported in the case of [Fe^II(bpy)₃]²⁺ are of general validity to the entire family of Fe(II)-polypyridine complexes.     

(Vapour + liquid) equilibria for the binary mixtures (1-propanol + dibromomethane,or + bromochloromethane,or + 1,2-dichloroethane or + 1-bromo-2-chloroethane) at T = 313.15 K

Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures.The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol⁻¹ for (1-propanol + bromochloromethane) and 1052 J · mol⁻¹ for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.     

(Liquid + liquid) equilibria in {water + acrylic acid + (1-butanol,or 2-butanol,or 1-pentanol)} systems at T = 293.2 K,T = 303.2 K,and T = 313.2 K and atmospheric pressure

(Liquid + liquid) equilibrium (LLE) data for {water + acrylic acid + (1-butanol, or 2-butanol, or 1-pentanol)} at T = 293.2 K, T = 303.2 K, and T = 313.2 K and atmospheric pressure (≈95 kPa) were determined by Karl Fischer titration and densimetry. All systems present type I binodal curves. The size of immiscibility region changes little with an increase in temperature, but increases according to the solvent, following the order: 2-butanol < 1-butanol < 1-pentanol. Values of solute distribution and solvent selectivities show that 1-pentanol is a better solvent than 1-butanol or 2-butanol for acrylic acid removal from water solutions. Quality of data was ascertain by Hand and Othmer-Tobias equations, giving R² > 0.916, mass balance and accordance between tie lines and cloud points. The NRTL model was used to correlate experimental data, by estimating new energy parameters, with root mean square deviations below 0.0053 for all systems.     

Transient absorption induced by a picosecond electron pulse in the fused silica windows of an optical cell

The transient absorption induced by picosecond pulse radiolysis in the windows of a fused silica optical cell is investigated with pump probe techniques in the UV and the visible range. After excitation with an electron pulse of 7 MeV and an effective duration of around 10 ps the absorbance changes during relaxation are recorded up to nanoseconds with a supercontinuum and a single wavelength probe at 263 nm. The complex spectral signatures and kinetics of the empty cell are set into relation with the transient absorption of water radiolysis. Special care is taken to assure equal irradiation conditions for the comparative measurements over the large spectral range. The results reveal clearly that the transient absorption induced in the fused silica cell is not negligible. The transient signals due to the cell should be considered in picosecond pulse radiolysis of solutions in order to avoid important errors on the time dependent yield of transient species, particularly of those absorbing in the UV.     

Excess molar volumes of (an alkane + 1-chloroalkane) atT = 298.15 K

The densities of the following: (pentane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (hexane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (heptane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), (octane  +  1-chloropropane, or 1-chlorobutane, or 1-chloropentane, or 1-chlorohexane), were measured at T =  298.15 K by means of a vibrating-tube densimeter. The excess molar volumes V_m^E, calculated from the density data, are negative for (pentane  +  1-chloropentane, or 1-chlorohexane) and (hexane  +  1-chlorohexane) over the entire range of composition. (Pentane  +  1-chlorobutane), (hexane  +  1-chloropentane) and (heptane  +  1-chlorohexane) exhibit an S-shapedV_m^E dependence. For all the other systems,V_m^E is positive. The V_m^Eresults were correlated using the fourth-order Redlich–Kister equation, with the maximum likelihood principle being applied for determining the adjustable parameters.     

Liquid density of biofuel mixtures: 1-Heptanol + heptane system at pressures up to 140 MPa and temperatures from 298.15 K to 393.15 K

This work reports new experimental density data (954 points) for binary mixtures of 1-heptanol + heptane over the composition range (seven compositions; 0 ⩽ 1-heptanol mole fraction x ⩽ 1), between 298.15 and 393.15 K, and for 23 pressures from 0.1 MPa up to 140 MPa. An Anton Paar vibrating tube densimeter, calibrated with an uncertainty of ±0.7 kg · m⁻³ was used to perform these measurements. The experimental density data were fitted with a Tait-like equation with low standard deviations. Excess volumes have been calculated from the experimental data. In addition, the isobaric thermal expansivity and the isothermal compressibility have been derived from the Tait-like equation, provided as supplementary material.     

The potentials of zero charge of Pd(1 1 1) and thin Pd overlayers on Au(1 1 1)

The potential of zero charge (pzc) of Pd(1 1 1) has been determined in dilute NaF solutions by measuring the Gouy–Chapman minimum of the double-layer capacity. For a massive Pd(1 1 1) single crystal electrode a pzc of −0.12 V vs. SCE has been found. The corresponding values for thin Pd(1 1 1) overlayers on Au(1 1 1) have also been determined. While the pzc of the first, pseudomorphic Pd layer on Au(1 1 1) is −0.09 V vs. SCE, the pzc of a five monolayers thick Pd film on Au(1 1 1) is practically identical to the pzc of the massive Pd(1 1 1) electrode. By comparing pzc's and work functions for Au(1 1 1) and Pd(1 1 1), the dipole contribution to the potential drop across the Pd(1 1 1)/water interface is estimated.     

The influence of chloride on the initial anodic dissolution of Cu3Au(1 1 1)

We report a detailed in situ X-ray diffraction study of the influence of chloride on the atomic structure evolution at the solid-electrolyte interface during the selective dissolution of Cu from a Cu₃Au(1 1 1) surface immersed in 0.1 M H₂SO₄. We disclose that the formation of the initial ultrathin Au-rich (1 1 1) with an inverted stacking sequence, as recently observed at Cu₃Au(1 1 1) in contact with pure 0.1 M H₂SO₄, is strongly influenced by adding 5 mM HCl. The main finding is a negative shift of about 150 mV of the critical potential at which the ultra-thin Au-rich layer transforms into thicker Au islands. The presented results support the view that it is not a thermodynamic driving force, but rather the rate of surface diffusion that dominates the formation of the structures of the metallic layer.     

In situ study of nitrobenzene grafting on Si(1 1 1)-H surfaces by infrared spectroscopic ellipsometry

The binding of nitrobenzene (NB) molecules from a solution of 4-nitrobenzene-diazonium-tetrafluoroborate on a Si(1 1 1)-H surface was investigated during the electrochemical processing in diluted sulphuric acid by means of infrared spectroscopic ellipsometry (IR-SE). The grafting was monitored by an increase in specific IR absorption bands due to symmetric and anti-symmetric NO₂ stretching vibrations in the 1400–1700 cm^?1 regime. The p- and s-polarized reflectances were recorded within 20 s for each spectrum only. NB molecules were detected when bonded to the Si(1 1 1) surface but not in the 2 mM solution itself. Oxide formation on the NB grafted Si surface was observed after drying in inert atmosphere and not during the grafting process in the aqueous solution.     

Speeds of sound in {(1 − x)CH4 + xN2} with x = (0.10001, 0.19999, and 0.5422) at temperatures between 170 K and 400 K and pressures up to 30 MPa

The speed of sound in {(1 − x)CH₄ + xN₂} has been measured with a spherical acoustic resonator. Two mixtures with x = (0.10001 and 0.19999) were studied along isotherms at temperatures between 220 K and 400 K with pressures up to 20 MPa; a few additional measurements at p = (25 and 30) MPa are also reported. A third mixture with x = 0.5422 was studied along pseudo-isochores at amount-of-substance densities between 0.2 mol · dm⁻³ and 5 mol · dm⁻³. Corrections for molecular vibrational relaxation are discussed in detail and relaxation times are reported. The overall uncertainty of the measured speeds of sound is estimated to be not worse than ±0.02%, except for those measurements in the mixture with x = 0.5422 that lie along the pseduo-isochore at the highest amount-of-substance density. The results have been compared with the predictions of several equations of state used for natural gas systems.