Design and operation characteristics of a high power transverse flow pulser sustained cw CO2 laser

A transverse flow, transverse discharge cw CO₂ laser in which de discharge is sustained by employing high repetition rate high voltage pulses has been developed. Pulser sustained discharge through electrodes of innovative design provided uniform excitation at electrical input power densities more than 10 W/cc. Laser output power more than 2.5 kW was obtained in a laser gas mixture consisting of 0.5 mbar of CO₂, 16 mbar of N₂ and 38.5 mbar of He. Design details and operational characteristics of this laser are presented.     

High-power transverse flow CW CO2 laser for material processing applications

A transverse flow transversely excited (TFTE) CW CO₂ with a maximum output power about 15 kW has been developed. This is excited by pulser sustained DC discharge applied between a pair of multi-pins anodes and a common tubular cathode. Though the laser power in convective cooled CO₂ laser scales proportionally with the volumetric gas flow, it did not increase in this laser when the volumetric gas flow was increased by increasing the electrode separation keeping the flow velocity constant. The discharge voltage too remained almost unchanged with increase of the electrode separation. These observations are explained considering the electrical discharge being controlled by ionization instability. Laser materials processing applications often demand programming facilities for laser power modulation. A four-stage cascaded multilevel DC–DC converter-based high-frequency switch mode power supply has been developed to modulate the output power of the laser. Laser was operated up to 15 kW output power in four different modes viz. continuous wave mode, pulse periodic mode, single shot mode and processing velocity-dependent power mode with 1.2 kHz modulation bandwidth. We describe briefly the laser system, the SMPS, and the temporal behavior of laser beam.     

Accuracy in determination of the temperature and partial pressure of CO<Subscript>2</Subscript> in CO<Subscript>2</Subscript>:N<Subscript>2</Subscript>:H<Subscript>2</Subscript>O:NO<Subscript>2</Subscript> mixtures by multiple-frequency laser probing

We present the results of analysis of the errors introduced by hot-band transitions 11¹0-01¹1, 03¹0-01¹1, 12⁰0-12⁰1 of the CO₂ molecule and the absorption lines of the H₂O and NO₂ molecules in determination of the temperature and partial pressure of CO₂, included in the gas mixture CO₂: N₂:H₂O: NO₂ at atmospheric pressure, by multiple-frequency laser probing using a CO₂ laser tunable over the lines of the 00⁰1-[10⁰0,02⁰0]_I,II ground-state laser transitions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 810–815, November–December, 2007.     

Absorption by CS<Subscript>2</Subscript> molecules on “hot” band emission lines from a TEA CO<Subscript>2</Subscript> laser

We have measured absorption of emission from a TEA CO₂ laser, lasing on hot band lines, in pure CS₂ and a mixture of CS₂ with air, and we have determined the optimal lines for optical excitation. Numerical modeling has shown that as the peak intensity of the pump radiation is increased, we observe absorption saturation, the extent of which decreases as the pressure increases. The major factor responsible for absorption saturation is the “rotational bottleneck” effect. Depending on the peak intensity of the radiation, addition of a buffer gas can lead to an increase or decrease in the absorption. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 61–66, January–February, 2007.     

Three-Mirror Multiple-Pass Cavity of a Transversely RF-Excited Planar Waveguide CO<Subscript>2</Subscript> Laser

A theoretical model for determining the optical losses in the three-mirror, multiple-pass cavity of a transversely rf-excited planar waveguide CO₂ laser with an exit mirror of arbitrary radius of curvature has been developed.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 198–201, March–April, 2005.     

Vibrational kinetics of the active media of CW CO<Subscript>2</Subscript> lasers

The vibrational kinetics of CW CO₂ lasers has been analyzed within the framework of a temperature model. The necessity of taking into account the coupling of the vibrational modes of the CO₂ molecule in determining the occupation numbers and the store of vibrational energy in individual modes is shown. Expressions that connect vibrational temperatures with the rates of excitation and relaxation of the lower vibrational levels of modes have been obtained. The ratios between the vibrational temperatures on selective excitation of the 00° 1 level and on excitation of CO₂ molecules in an electric discharge as well as the character of the dependences of vibrational temperatures on the pumping-energy value are discussed.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 1, pp. 72–79, January–February, 2005.     

Design considerations and scaling laws for high power convective cooled CW CO2 lasers

Various criteria for designing high power convective cooled CO₂ lasers have been discussed. Considering the saturation intensity, optical damage threshold of the optical resonator components and the small-signal gain, the scaling laws for designing high power CW CO₂ lasers have been established. In transverse flow CO₂ lasers having discharge of square cross-section, the discharge lengthL and its widthW for a specific laser powerP (Watt) and gas flow velocityV (cm/s) can be given byL = 1.4 x 10⁴ p ^1/2 V ^-1 cms andW = 0.04P ^1/2 cms. The optimum transmitivity of the output coupler is found to be almost constant (about 60%), independent of the small signal gain and laser power. In fast axial flow CO₂ lasers the gas flow should be divided into several discharge tubes to maintain the flow velocity within sonic limit. The discharge length in this type of laser does not depend explicitly on the laser power, instead it depends on the input power density in the discharge and the gas flow velocity. Various considerations for ensuring better laser beam quality are also discussed.     

Trace Detection of Low Concentrations of Ozone Using a CO<Subscript>2</Subscript> Laser with Automatic Tuning over the Spectrum

A technique of detection of ozone, using a CO₂ laser with rapid automated tuning over 8–10 generation lines in the 9.4–9.6-µm spectral range, has been developed. Its experimental verification has shown a higher accuracy of detecting low concentrations of O₃ in comparison with the traditional technique of differential absorption on two lines (on-line and off-line). Using the technique suggested, the content of ozone in the vicinity of city roads with heavy traffic has been measured.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 251–255, March–April, 2005.     

封离式He-N$lt;sub$gt;2$lt;/sub$gt;-CO$lt;sub$gt;2$lt;/sub$gt;激光器横模特性的测量与分析

利用激光光束分析仪,实时在线测量了一根He-N₂-CO₂封离式激光管的横模分布特性,得到了激光模式随放电电流的变化关系.实验表明该激光器在最佳工作电流时,容易形成低阶模运转,但很难获得基模运转,通过改善对称性以及加快冷却水流速可以获得基模运转.通过激光动力学过程分析了模式变化的形成原因,为大功率激光器模式控制与改善提供了一定的理论和实验借鉴. 关键词： 2激光')" href="#">CO₂激光 横模 激光模式分析 光束质量     

On the repetitive operation of a self-switched transversely excited atmosphere CO<Subscript>2</Subscript> laser

The repetition rate capability of self-switched transversely excited atmosphere (TEA) CO₂ laser was studied for different gas flow configurations. For an optimized gas flow configuration, repetitive operation was achieved at a much smaller gas replenishment factor between two successive pulses when compared with repetitive systems energized by conventional pulsers.     

Anomalous absorption in H<Subscript>2</Subscript>CN and CH<Subscript>2</Subscript>CN molecules

Structures of H₂CN and CH₂CN molecules are similar to that of H₂CO molecule. The H₂CO has shown anomalous absorption for its transition 1₁₁–1₁₀ at 4.8 GHz in a number of cool molecular clouds. Though the molecules H₂CN and CH₂CN have been identified in TMC-1 and Sgr B2 through some transitions in ortho as well as in para species, here we have investigated the condition under which transitions 1₁₁–1₁₀ and 2₁₂–2₁₁ of these molecules may show anomalous absorption. For the present investigation, we have calculated energy levels and radiative transition probabilities. However, we have used scaled values for collisional rate coefficients. We found that relative values of collisional rate coefficients can produce the required anom-alous absorption in 1₁₁–1₁₀ and 2₁₂–2₁₁ transitions in the molecules.      

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Investigation on structural characteristics of PVDF–AgCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite solid polymer electrolyte system

There has been an increasing interest towards the incorporation of nanosize ceramic fillers in polymer electrolytes. Solid polymer electrolytes based on polyvinylidene fluoride (PVDF), silver triflate (AgCF₃SO₃), and x wt% of aluminum oxide (Al₂O₃) nanopowders (where x = 1, 3, 5, and 10, respectively) have been prepared using solution casting technique. The structural characteristics of these thin film specimens were studied using Fourier transform infrared (FTIR) and X-ray diffraction (XRD) patterns at room temperature. The appearance of new absorption bands and gradual shifts observed in some characteristic peaks confirmed the complex formation between polyvinylidene fluoride and silver triflate. Furthermore, the addition of nanosized filler Al₂O₃ has also indicated the interaction of the filler with the polymer salt complex. The XRD patterns obtained for all these samples in the 2θ range 10° to 70° showed the amorphous nature of these samples. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Synthesis of ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> complex substrates and growth of GaN films

With the solid phase reaction between pulsed-laser-deposited (PLD) ZnO film and α-Al₂O₃ substrate, ZnAl₂O₄/α-Al₂O₃ complex substrates were synthesized. X-ray diffraction (XRD) spectra show that as the reaction proceeds, ZnAl₂O₄ changes from the initial (111)-oriented single crystal to poly-crystal, and then to inadequate (111) orientation. Corresponding scanning electron microscope (SEM) images indicate that the surface morphology of ZnAl₂O₄ transforms from uniform islands to stick structures, and then to bulgy-line structures. In addition, XRD spectra present that ZnAl₂O₄ prepared at low temperature is unstable at the environment of higher temperature. On the as-obtained ZnAl₂O₄/α-Al₂O₃ substrates, GaN films were grown without any nitride buffer using light-radiation heating low-pressure MOCVD (LRH-LP-MOCVD). XRD spectra indicate that GaN film on this kind of complex substrate changes fromc-axis single crystal to poly-crystal as ZnAl₂O₄ layer is thickened. For the single crystal GaN, its full width at half maximum (FWHM) of X-ray rocking curve is 0.4°. Results indicate that islands on thin ZnAl₂O₄ layer can promote nucleation at initial stage of GaN growth, which leads to the (0001)-oriented GaN film.     

Influence of the sample orientation in Sn<Subscript>2</Subscript>P<Subscript>2</Subscript>S<Subscript>6</Subscript> crystals on the hydrostatic piezoelectric coefficients

The influence of the sample orientation on the effective value of the hydrostatic piezoelectric coefficients d _h ⁽ⁱ⁾ of Sn₂P₂S₆ crystals has been studied. The hydrostatic piezoelectric coefficients d _h ⁽¹⁾ and d′ _h ⁽³⁾ , were measured, d _h ⁽¹⁾ =(244±3) pC/N and d′ _h ⁽³⁾ =(92±1) pC/N. The hydrostatic piezoelectric coefficient d _h ⁽³⁾ for orthogonal axis system was calculated to be d _h ⁽³⁾ =(87±2) pC/N. The, optimal orientation of the sample has been found as (Xy l)−20°-cut. Maximal value of the effective hydrostatic piezoelectric coefficient d _h ⁽¹⁾ equals 260 pC/N. Double rotated samples were also studied. The orientation of the samples insensitive to the pressure has been found. The theoretical mean value of hydrostatic piezoelectric coefficient (d _h ) _mean corresponding to randomly oriented Sn₂P₂S₆ grains in a poled composite has been calculated to be (d _h ) _mean =136 pC/N.     

管板式大功率横流CO2激光横模测量及数值模拟

为了提高激光稳定性和激光加工质量,实验测量了大功率横流CO2激光横模,并理论分析了横模形成机理。针对大功率横流CO2激光器管板式电极结构,由麦克斯韦方程给出电场的横向分布,并通过数值计算得到了激光强度的横向分布。实验结果与数值模拟得到的激光能量分布基本一致。结果表明,在给定放电电压条件下,电极结构和气体流动速率决定了激光横模峰值大小,激光峰值的横向位置取决于气体流动的速率。     

Tunable optical parametric oscillator based on a KTP crystal,pumped by a pulsed Ti<Superscript>3+</Superscript>:Al<Subscript>2</Subscript>O<Subscript>3</Subscript> laser

We present the characteristics of an optical parametric oscillator based on a KTP crystal, pumped with noncritical phase matching by a pulsed Ti³⁺:Al₂O₃ laser, tunable in the range 677–970 nm. Tunable generation of signal and idler waves is obtained in the ranges 1030–1390 nm and 2690–3050 nm respectively. The efficiency of conversion of the pump to the signal wave is ≈23%, which for pulses of duration ≈8 nsec ensures an energy in the range 1.0–11.5 mJ. The width of the emission spectrum for the signal wave is within the range 0.8–1.8 nm and is predominantly determined by the linewidth of the Ti³⁺:Al₂O₃ pump laser. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 351–356, May–June, 2007.     

Effect of leakage transformer on laser power and mode pattern of CO2 laser excited by 60 Hz AC discharges

The 60 Hz AC discharges generated by a leakage transformer instead of an isolation one, which is usually used in the power supply of DC CO₂ laser, are employed as a pumping source in this experiment. The laser performance characteristics as functions of pressure and discharge current have been investigated. The maximum laser power is about 40 W at conditions of 18 Torr and 35 mA. The output power is not less than that of DC discharge at the same condition. In addition, the laser outputs of 60 Hz AC discharges obtained by different transformers such as a leakage type and an isolation one have been measured. It was found that the laser power obtained by the leakage transformer is saturated at the higher current compared with the isolation transformer.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

Optically pumped submillimeter laser lines from CD2Cl2 using a large tunability CW CO2 laser

Twenty-five new laser lines have been obtained in the wavelength region from 155 to 830 μm by optically pumping the CD₂Cl₂ (deuterated dichloromethane) molecule with a CW CO₂ laser having a tunability range of 300 MHz. The wavelength, polarization relative to that of CO₂ pumping radiation, and offset relative to the CO₂ center frequency were determined for all of the new lines and some other already known laser emissions. For all of them we give also the relative intensity and the optimum pressure of operation. Permanent address: Depto de Física e Química da FEIS — UNESP 15.378-000 Ilha Solteira-SP, Brazil