Chiral separation of novel diazenes on a polysaccharide‐based stationary phase in the reversed‐phase mode

Chiral high‐performance liquid chromatography separation of two recently synthesized liquid crystalline materials C1 and C2 was studied in the reversed‐phase mode. Both materials have an azo‐moiety and one chiral center in their molecular structures. They were available in racemic and pure S forms. For the enantiomeric separations, a Chiralpak AY‐RH stationary phase based on amylose tris(5‐chloro‐2‐methylphenylcarbamate) coated on 5 μm silica was used. The compounds were analyzed in both of their possible forms, the more thermodynamically stable E form and the labile Z form. The conditions and time scale of the UV‐induced E to Z transition were briefly evaluated. Under the optimized conditions, we were able to baseline separate S and R enantiomers of both of the studied materials not only in their E forms, but also in their Z forms. In comparison to the separation in the normal‐phase mode, which we have reported recently, the resolution in the reversed‐phase mode is significantly better. Interestingly, peak reversal was noticed for the S and R enantiomers when the separation was carried out with E versus Z forms of both compounds.     

Reactivity of Bridged Pentelidene Complexes with Isonitriles: A New Way to Pentel‐Containing Heterocycles

The reaction of [Cp*E{W(CO)₅}₂] (E=P ( 1 a ), As ( 1 b ); Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with isonitriles RNC (R=tBu, cyclohexyl (Cy), nBu) depends on the steric demand of the substituent at the isonitrile as well as on the stoichiometry of the starting materials. With tBuNC only the Lewis acid/base adducts [Cp*E{W(CO)₅}₂(CNtBu)] (E=P ( 2 a ), As ( 2 b )) are formed. The use of Cy and n‐butylisonitrile leads first to the formation of the Lewis acid/base adduct, but only at low temperatures. At ambient temperatures, a rearrangement occurs and bicyclo[3.2.0]heptane derivatives of the type [{C(Me)C(CH₂)C(Me)C(Me)C(Me)}C(NR)‐ E{W(CO)₅}₂] (E=P, As; R=Cy, nBu) ( 3 a‐Cy , 3 b‐Cy , 3 a‐nBu and 3 b‐nBu ) are obtained. The use of a further equivalent of isonitrile results in products revealing two new structural motifs, the four‐membered ring derivatives [C(Cp*)N(R)C(NR)E{W(CO)₅}₂] ( 4 : E=P, As; R=Cy, nBu) and the bicyclic complexes [[{C(Me)C‐ (CH₂)C(Me)C(Me)C(Me)}C(NR)₂‐ E{W(CO)₅}₂] ( 5 : E=As; R=Cy). The reaction pathway depends on the substituent at the isonitrile. By treatment of 1 a with two equivalents of CyNC only a 2H‐1,3‐azaphosphet complex 4 a‐Cy (E=P; R=Cy) is formed. Treatment of 1 b with two equivalents of CyNC exclusively leads to the complex 5 b‐Cy (E=As; R=Cy). Treatment of 1 a with two equivalents of nBuNC results in a mixture of complexes, the 2H‐1,3‐azaphosphet 4 a‐nBu (E=P; R=nBu) and the bicyclic complex 5 a‐nBu (E=P; R=nBu). For the arsenidene complex 1 b a mixture of the 2H‐1,3‐azarsete complex 4 b‐nBu (E=As; R=nBu) and the bicyclic complex 5 b‐nBu (E=P, As; R=Cy, nBu) is obtained. Complex 4 b‐nBu is the first example of a 2H‐1,3‐azarsete complex. All products have been characterized by using mass spectrometry, NMR spectroscopy, and X‐ray diffraction analysis.     

One‐Dimensional,Cofacial Porphyrin Polymers Formed by Self‐Assembly of meso‐Tetrakis(ERE Donor) Zinc(II) Porphyrins

A series of meso‐tetrakis‐(ERE donor) zinc(II) porphyrins n Zn (ERE donor=4‐R‐3,5‐bis[(E)‐methyl]phenyl; 1 Zn: E=NMe₂, R=Br; 2 Zn: E=NMe₂, R=H; 3 Zn: E=OMe, R=Br; 4 Zn: E=OMe, R=H) have been synthesized in excellent yields. As a result of the combination of a Lewis acidic site and eight Lewis basic sites within one molecule, monomeric molecules of n Zn self‐assemble to form one‐dimensional porphyrin polymers [ n Zn]_∞ in the solid state, as confirmed for 1 Zn and 3 Zn by X‐ray crystallography. The coordination environment around the zinc(II) ions in these polymers is octahedral. They are ligated by four equatorial nitrogen atoms of the porphyrin and two apical E atoms (E=N, O) provided by the EBrE donor groups of adjacent n Zn molecules. Complexes 2 Zn and 4 Zn did not form single crystals, but solid‐state UV/Vis analysis points to the formation of similar structures. Solution UV/Vis and ¹H NMR spectroscopy indicated that interactions between 1 Zn and 2 Zn monomers in the polymers are stronger than between 3 Zn and 4 Zn monomers. Interestingly, they also revealed that the presence of a neighboring bromine atom in the EBrE donor groups has a considerable influence on the coordination properties of the benzylic N or O atoms. The zinc(II) ions of the porphyrins most likely adopt only hexacoordination in the solid state, owing to the unique predisposition of Lewis acidic and basic sites in the n Zn molecules. Several parameters of the aggregates, for example, the interplanar separation between porphyrins and the zinc–zinc distances, change as a function of the coordinating E groups. The high degree of modularity in their synthesis makes these zinc(II) porphyrins an interesting new entry in noncovalent multiporphyrin assemblies.     

A chiral LC‐MS/MS method for the enantioselective determination of R‐(+)‐ and S‐(–)‐pantoprazole in human plasma and its application to a pharmacokinetic study of S‐(–)‐pantoprazole sodium injection

Pantoprazole, a proton pump inhibitor, is clinically used for the treatment of peptic diseases. An enantioselective LC‐MS/MS method was developed and validated for the simultaneous determination of pantoprazole enantiomers in human plasma. Pantoprazole enantiomers and the internal standard were extracted from plasma using acetonitrile. Chiral separation was carried on a Chiralpak IE column using the mobile phase consisted of 10 mm ammonium acetate solution containing 0.1% acetic acid–acetonitrile (28 : 72, v /v). MS analysis was performed on an API 4000 mass spectrometer. Multiple reactions monitoring transitions of m /z 384.1→200.1 and 390.1→206.0 were used to quantify pantoprazole enantiomers and internal standard, respectively. For each enantiomer, no apparent matrix effect was found, the calibration curve was linear over 5.00–10,000 ng/mL, the intra‐ and inter‐day precisions were below 10.0%, and the accuracy was within the range of –5.6% to 0.6%. This method was applied to the stereoselective pharmacokinetic studies in human after intravenous administration of S ‐(–)‐pantoprazole sodium injections. No chiral inversion was observed during sample storage, preparation procedure and analysis. While R ‐(+)‐pantoprazole was detected in human plasma with a slightly high concentration, which implied that S ‐(–)‐pantoprazole may convert to R ‐(+)‐pantoprazole in some subjects.     

Stereoselective separation of (1S, 4S)‐sertraline from medicinal reaction mixtures by countercurrent chromatography with hydroxypropyl‐β‐cyclodextrin as stereoselective selector

Four stereoisomeric components were produced during the synthesis of the antidepressant drug (1S, 4S)‐sertraline hydrochloride due to the two chiral carbon centers in its chemical structure, including (1S, 4S), (1R, 4R), (1S, 4R), and (1R, 4S)‐isomer. Stereoselective separation of the target isomer (1S, 4S)‐sertraline from the medicinal reaction mixtures by countercurrent chromatography using hydroxypropyl‐β‐cyclodextrin as the stereoselective selector was investigated. A biphasic solvent system composed of n‐hexane/0.20 mol/L phosphate buffer solution with pH 7.6 containing 0.10 mol/L of hydroxypropyl‐β‐cyclodextrin (1:1, v/v) was selected for separation of cis‐sertraline and trans‐sertraline using reverse phase elution mode and (1S, 4S)‐sertraline was separated with (1R, 4R)‐sertraline using recycling elution mode. A fabricated in‐house analytical countercurrent chromatographic apparatus was used for optimization of the separation conditions. Stationary phase retention and peak resolution were investigated for separation of cis‐sertraline and trans‐sertraline by the analytical apparatus.     

Size‐based proteins separation using polymer‐entrapped colloidal self‐assembled nanoparticles on‐chip

We report on a facile method to stabilize colloidal self‐assembled (CSA) nanoparticles packed in microchannels for high speed size‐based separation of proteins. Silica nanoparticles, self‐assembled in a network of microfluidic channels, were stabilized with a methacrylate polymer prepared in situ through photopolymerization. The entrapment conditions were investigated to minimize the effect of the polymer matrix on the structure of the packing and the separation properties of the CSA beds. SEM shows that the methacrylate matrix links the nanoparticles at specific sphere–sphere contact points, improving the stability of the CSA structure at high electric fields (up to at least 1800 V/cm), allowing fast and efficient separation. The %RSD of the protein migration times varied between 0.3 and 0.5% (n = 4, in 1 day) and <0.83% over a period of 7 days (n = 28 runs) in a single device, at high field strength. The overall %RSD of protein migration times from chip‐to‐chip across a single fabrication run was 4.3% (n = 3) and between fabrication runs was 11% (n = 35), with 87% fabrication yield, demonstrating reproducible packing and entrapment behavior. The optimized entrapped CSA beds demonstrated better separation performance (plate height, H ～ 200 nm) than similarly prepared on‐chip CSA beds without the polymer entrapment. Polymer‐entrapped CSA beds also exhibited superior protein resolving power: the minimum resolvable molecular weight difference of proteins in the polymer‐entrapped CSA bed is 0.6 kDa versus ～9 kDa for the native silica CSA bed (i.e. without polymer entrapment).     

The Helix to Super‐Helix Transition in the Self‐Assembly of π‐Systems: Superseding of Molecular Chirality at Hierarchical Level

Higher‐order super‐helical structures derived from biological molecules are known to evolve through opposite coiling of the initial helical fibers, as seen in collagen protein. A similar phenomenon is observed in a π‐system self‐assembly of chiral oligo(phenyleneethylene) derivatives (S )‐ 1 and (R )‐ 1 that explains the unequal formation of both left‐ and right‐handed helices from molecule having a specific chiral center. Concentration‐ and temperature‐dependent circular dichroism (CD) and UV/Vis spectroscopic studies revealed that the initial formation of helical aggregates is in accordance with the molecular chirality. At the next level of hierarchical self‐assembly, coiling of the fibers occurs with opposite handedness, thereby superseding the command of the molecular chirality. This was confirmed by solvent‐dependent decoiling of super‐helical structures and concentration‐dependent morphological analysis.     

Liquid-crystalline phthalocyanines revisited

A Commentary on the paper ”Homologous series of liquid‐crystalline metal free and copper octa‐n‐alkoxyphthalocyanines?, by J. F. van der Pol, E. Neeleman, J. W. Zwikker, R. J. M. Nolte, W. Drenth, J. Aerts, R. Visser and S. J. Picken. First published in Liquid Crystals, 6, 577‐592 (1989).     

Stereoselective determination of ginsenosides Rg3 and Rh2 epimers in rat plasma by LC‐MS/MS: Application to a pharmacokinetic study

We developed and validated an accurate and sensitive LC–MS/MS method for the simultaneous quantitation of ginsenoside Rg3 and Rh2 epimers (R‐Rg3, S‐Rg3, R‐Rh2, and S‐Rh2) in rat plasma. Analytes were extracted from 0.1 mL aliquots of rat plasma by liquid–liquid extraction, using 2 mL of ethyl acetate. In this assay, dioscin (500 ng/mL) was used as an internal standard. Chromatographic separation was conducted using an Acclaim RSLC C₁₈ column (150 × 2.1 mm, 2.2 μm) at 40°C, with a gradient mobile phase consisting of 0.1% formic acid in distilled water and in acetonitrile, a flow rate of 0.35 mL/min, and a total run time of 20 min. Detection and quantification were performed using a mass spectrometer in selected reaction‐monitoring mode with negative electrospray ionization at m/z 783.4 → 161.1 for R‐Rg3 and S‐Rg3, m/z 621.3 → 161.1 for R‐Rh2 and S‐Rh2, and m/z 867.2 → 761.5 for the internal standard. For R‐Rg3 and S‐Rg3, the lower limit of quantification was 5 ng/mL, with a linear range up to 500 ng/mL; for R‐Rh2 and S‐Rh2, the lower limit of quantification was 150 ng/mL, with a linear range up to 6000 ng/mL. The coefficient of variation for assay precision was less than 10.5%, with an accuracy of 86.4–112%. No relevant cross‐talk or matrix effect was observed. The method was successfully applied to a pharmacokinetic study after oral administration of 400 mg/kg and 2000 mg/kg of BST204, a fermented ginseng extract, to rats. We found that the S epimers exhibited significantly higher plasma concentrations and area under curve values for both Rg3 and Rh2. This is the first report on the separation and simultaneous quantification of R‐Rg3, S‐Rg3, R‐Rh2, and S‐Rh2 in rat plasma by LC‐MS/MS. The method should be useful in the clinical use of ginseng or its derivatives.     

Synthese und Struktur C,N‐difunktionalisierter Sulfinimidamide

Synthesis and Structure of C,N‐difunctionalized Sulfinimideamides Sulfurdiimides RN=S=NR ( 1 a , b ) react in diethyl ether with two equivalents of lithiummethyl to give dimeric C,N‐dilithiummethylenesulfinimideamide ether adducts {Li₂[H₂C–S(NR)₂ · Et₂O]}₂ ( 2 a , b ) ( a : R = ^tBu, b : R = SiMe₃). Metathesis of 2 b with four equivalents of Me₃SiCl, Me₃SnCl or Ph₃SnCl yields the corresponding C,N‐bis‐substituted sulfinimideamides R₃EH₂C–S[N(SiMe₃)₂]NER₃ ( 3 – 5 ) ( 3 : R = Me, E = Sn; 4 : R = Ph, E = Sn; 5 : R = Me, E = Si). The crystal structures of 2 a and 2 b were determined by X‐ray structure analysis. Both compounds form centrosymmetric cage structures consisting of two distorted face sharing cubes ( 2 a : space group P1 (No. 2); Z = 2 (4 · 0,5); 2 b : space group C2/c (No. 15), Z = 4).     

A CAS study on S‐loss and O‐loss dissociation mechanisms of the SO2+ ion in the C,D, and E states

In the present work, we mainly study dissociation of the C ²B₁, D²A₁, and E²B₂ states of the SO₂⁺ ion using the complete active‐space self‐consistent field (CASSCF) and multiconfiguration second‐order perturbation theory (CASPT2) methods. We first performed CASPT2 potential energy curve (PEC) calculations for S‐ and O‐loss dissociation from the X, A, B, C, D, and E primarily ionization states and many quartet states. For studying S‐loss predissociation of the C, D, and E states by the quartet states to the first, second, and third S‐loss dissociation limits, the CASSCF minimum energy crossing point (MECP) calculations for the doublet/quartet state pairs were performed, and then the CASPT2 energies and CASSCF spin‐orbit couplings were calculated at the MECPs. Our calculations predict eight S‐loss predissociation processes (via MECPs and transition states) for the C, D, and E states and the energetics for these processes are reported. This study indicates that the C and D states can adiabatically dissociate to the first O‐loss dissociation limit. Our calculations (PEC and MECP) predict a predissociation process for the E state to the first O‐loss limit. Our calculations also predict that the E²B₂ state could dissociate to the first S‐ and O‐loss limits via the A²B₂ ← E²B₂ transition. On the basis of the 13 predicted processes, we discussed the S‐ and O‐loss dissociation mechanisms of the C, D, and E states proposed in the previous experimental studies. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

An effective sequence characterized amplified region‐PCR method derived from restriction site‐amplified polymorphism for the identification of female Schistosoma japonicum of zoonotic significance

In the present study, restriction site‐amplified polymorphism (RSAP) markers were used to examine the genetic variability of Schistosoma japonicum isolates from different endemic provinces in mainland China. Of the 45 pairs of primers screened, 10 RSAP markers showed a clear banding pattern with good resolution; however, only six exhibited a polymorphism among different isolates. Among six RSAP markers, one pair of primers (R8+R10) was able to differentiate male and female parasites, and amplified one constant specific band for female S. japonicum isolates. The specific band was recovered, re‐amplified and sequenced, and a sequence of 162 bp was obtained. Based on this sequence, a pair of specific primers was designed and used to develop sequence characterized amplified region (SCAR)‐PCR assay for identification and differentiation of female S. japonicum isolates. The SCAR‐PCR assay allowed the specific identification of female S. japonicum, with no amplicons being amplified from male S. japonicum, Fasciola hepatica, Clonorchis sinensis, S. mansoni (male and female parasite). DNA sequencing confirmed the identity of the amplified products. The minimum amount of DNA detectable using SCAR‐PCR assay was 0.3 ng for female S. japonicum. The SCAR‐PCR was able to differentiate effectively the male and female S. japonicum worms collected from 12 geographical origins in eight endemic provinces, the gender of which was known based on the morphological and biological features. These results showed that SCAR‐PCR provides an effective tool for the sex differentiation studies of S. japonicum, identification of female S. japonicum, diagnosis and epidemiological survey of S. japonicum infections in animals and human.     

Hierarchical Superstructures with Control of Helicity from the Self‐Assembly of Chiral Bent‐Core Molecules

Herein, two asymmetric chiral bent‐core molecules, 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1R)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1S)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self‐assembled hierarchical superstructures. Mirror‐imaged CD spectra showed a split‐type Cotton effect after the formation of self‐assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self‐assembly of bent‐core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Preparation of antimicrobial polycaprolactone‐silica composite films with nanosilver rods and triclosan using roll‐milling method

In this study, antimicrobial polycaprolactone composite films containing 12.5% silica and 0.15% silver nanorods were prepared using the roll‐milling method. The destruction of E. coli and S. aureus on the surface of the composite films was evaluated after 6 hr of incubation at 37°C. For the E. Coli, no bacterial contamination was detected after 6 hr and the film surface was completely disinfected with 100% reduction of the microbial contamination. For the S. aureus, 94% reduction of the bacterial contamination was observed after 6 hr. The results were compared with the composite films containing triclosan, a broad‐spectrum antimicrobial agent. The antimicrobial activity tests with 0.25% triclosan incorporated polycaprolactone‐silica composite films showed only 70% reduction of E. coli and 95% reduction of S. aureus after 6 hr. The results demonstrated that the use of silver nanoparticles in the biopolymer industry has huge potential for the self‐cleaning applications. Copyright © 2009 John Wiley & Sons, Ltd.     

A Disulfide Bridge Allows for Site‐Selective Binding in Liver Bile Acid Binding Protein Thereby Stabilising the Orientation of Key Amino Acid Side Chains

The presence of a disulfide bridge in liver bile acid binding protein (L‐BABP/S‐S) allows for site‐selective binding of two bile acids, glycochenodeoxycholic (GCDA) and glycocholic acid (GCA), differing only in the presence of a hydroxyl group. The protein form devoid of the disulfide bridge (L‐BABP) binds both bile salts without discriminating ability. We investigate the determinants of the molecular recognition process in the formation of the heterotypic L‐BABP/S‐S complex with GCA and GCDA located in the superficial and inner protein sites, respectively. The comparison of the NMR spectroscopy structure of heterotypic holo L‐BABP/S‐S, the first reported for this protein family, with that of the homotypic L‐BABP complex demonstrates that the introduction of a S–S link between adjacent strands changes the conformation of three key residues, which function as hot‐spot mediators of molecular discrimination. The favoured χ₁ rotameric states (t, g⁺ and g^? for E99, Q100 and E109 residues, respectively) allow the onset of an extended intramolecular hydrogen‐bond network and the consequent stabilisation of the side‐chain orientation of a buried histidine, which is capable of anchoring a specific ligand.     

Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.     

Protein Patterns and Oscillations on Lipid Monolayers and in Microdroplets

The Min proteins from E.coli position the bacterial cell‐division machinery through pole‐to‐pole oscillations. In vitro, Min protein self‐organization can be reconstituted in the presence of a lipid membrane as a catalytic surface. However, Min dynamics have so far not been reconstituted in fully membrane‐enclosed volumes. Microdroplets interfaced by lipid monolayers were employed as a simple 3D mimic of cellular compartments to reconstitute Min protein oscillations. We demonstrate that lipid monolayers are sufficient to fulfil the catalytic role of the membrane and thus represent a facile platform to investigate Min protein regulated dynamics of the cell‐division protein FtsZ‐mts. In particular, we show that droplet containers reveal distinct Min oscillation modes, and reveal a dependence of FtsZ‐mts structures on compartment size. Finally, co‐reconstitution of Min proteins and FtsZ‐mts in droplets yields antagonistic localization, thus demonstrating that droplets indeed support the analysis of complex bacterial self‐organization in confined volumes.     

Synthetic and Structural Studies of 1,8‐Chalcogen Naphthalene Derivatives

Four novel 1,8‐disubstituted naphthalene derivatives 4 – 7 that contain chalcogen atoms occupying the peri positions have been prepared and fully characterised by using X‐ray crystallography, multinuclear NMR spectroscopy, IR spectroscopy and MS. Molecular distortion due to noncovalent substituent interactions was studied as a function of the bulk of the interacting chalcogen atoms and the size and nature of the alkyl group attached to them. X‐ray data for 4 – 7 was compared to the series of known 1,8‐bis(phenylchalcogeno)naphthalenes 1 – 3 , which were themselves prepared from novel synthetic routes. A general increase in the E???E′ distance was observed for molecules containing bulkier atoms at the peri positions. The decreased S???S distance from phenyl‐ 1 and ethyl‐ 4 analogues is ascribed to a weaker chalcogen lone pair–lone pair repulsion acting in the ethyl analogue due to the presence of two equatorial S(naphthyl) ring conformations. Two novel peri‐substituted naphthalene sulfoxides of 1 , Nap(O?SPh)(SPh) 8 and Nap(O?SPh)₂ 9 , which contain different valence states of sulfur, were prepared and fully characterised by using X‐ray crystallography and multinuclear NMR spectroscopy, IR spectroscopy and MS. Molecular structures were analysed by using naphthalene ring torsions, peri‐atom displacement, splay angle magnitude, S???S interactions, aromatic ring orientations and quasi‐linear O?S???S arrangements. The axial S(naphthyl) rings in 8 and 9 are unfavourable for S???S contacts due to stronger chalcogen lone pair–lone pair repulsion. Although quasi‐linear O?S???S alignments suggest attractive interaction is conceivable, analysis of the B3LYP wavefunctions affords no evidence for direct bonding interactions between the S atoms.     

Understanding the Role of Water in Aqueous Ruthenium‐Catalyzed Transfer Hydrogenation of Ketones.

We report an accurate computational study of the role of water in transfer hydrogenation of formaldehyde with a ruthenium‐based catalyst using a water‐specific model. Our results suggest that the reaction mechanism in aqueous solution is significantly different from that in the gas phase or in methanol solution. Previous theoretical studies have shown a concerted hydride and proton transfer in the gas phase (M. Yamakawa, H. Ito, R. Noyori, J. Am. Chem. Soc. 2000 , 122, 1466–1478;J.‐W. Handgraaf, J. N. H. Reek, E. J. Meijer, Organometallics 2003 , 22, 3150–3157; D. A. Alonso, P. Brandt, S. J. M. Nordin, P. G. Andersson, J. Am. Chem. Soc. 1999 , 121, 9580–9588; D. G. I. Petra, J. N. H. Reek, J.‐W. Handgraaf, E. J. Meijer, P. Dierkes, P. C. J. Kamer, J. Brussee, H. E. Schoemaker, P. W. N. M. van Leeuwen, Chem. Eur. J. 2000 , 6, 2818–2829), whereas a delayed, solvent‐mediated proton transfer has been observed in methanol solution (J.‐W. Handgraaf, E. J. Meijer, J. Am. Chem. Soc. 2007 , 129, 3099–3103). In aqueous solution, a concerted transition state is observed, as in the previous studies. However, only the hydride is transferred at that point, whereas the proton is transferred later by a water molecule instead of the catalyst.     

Rapid Sample Pretreatment,Identification and Determination of Active Constitutents in Water‐soluble Radix isatidis Extract via MAE,ESI‐MS and RODWs‐HPLC

In this study, we successfully studied water‐soluble extract from Radix isatidis. Optimized conditions of MAE were listed, the sample can be extracted completely in 10 minutes under microwave power of 400W and solid/liquid ratio of 1:80. Active compounds in water‐soluble extract from R. isatidis were identified with HPLC‐DAD/ESI‐MS, these compounds followed by cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine. RODWs–HPLC as a new sensitive chromatography were also first proposed and investigated, we favoringly used this method for simultaneous determination of these active constitutents in water‐soluble R. isatidis extract. Chromatographic separation was performed on a Diamonsil C18 column (5 μm, 150 mm × 4.6 mm) with a mobile phase gradient consisting of methanol and water at a flow‐rate of 1.0 mL/min, detection wavelengths 240, 250, 260 and 270 nm, the retention times of the tested five compounds were about 4.2, 5.8, 11.1, 14.2 and 20.8 min respectively, the limits of detection were 15, 12, 20, 5.8 and 24 ng/mL for cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine respectively, their linear ranges were between 0.045 and 350 μg/mL with correlation coefficient (R) of 0.9998‐0.9999. The relative standard deviations (RSDs) of intra‐day and inter‐day assays were 0.30‐2.36% and 0.86‐2.54% respectively. Extraction recoveries were 94.25‐106.21%. This novel analytical method was shown to be simple, low‐cost, sensitive and reliable for multiple components in complex or undeveloped materials via MAE, ESI‐MS and RODWs‐HPLC.