Spectrophotometric determination of aqueous acidity constants of three azo dyes

The two successive steps acidity constants of three azo dye derivatives D1–D3, were determined by a spectrophotometric method using 0.10 M KNO₃ as supporting electrolyte in water solvent. The electronic spectra of the compounds were recorded in the course of their pH-metric titration with a standard base solution. The protolytic equilibrium constants can be solved very satisfactorily from absorbance data, by combining the data obtained in the spectrometric determinations with graphic methods as the absorbance diagrams. An A-diagram shows the relative absorbance changes at two wavelengths as a function of the pH. For a one-step system, the absorbance at any wavelength must be proportional to the absorbance at any other wavelength, so an A-diagram for all wavelength combinations for such a system must be linear (rank, s=1). However, if a system is governed by two or more equilibria, the A-diagrams corresponding to multi-step titrations will change direction every time a new equilibrium becomes dominant in the system. Analysis of the each uniform sub-region can then be used in evaluating of the corresponding equilibrium. A-diagrams for all wavelength combinations suggest that these systems have the rank two(s=2). The results revealed that the K_a(1) and K_a(2) values of different azo dyes follow the order D3>D2>D1.      

Dissociation constants of some o,o'-substituted azo dyes

The dissociation constants, pK(a) (H(2)L(-)) and pK(a)(HL(2-)), were determined spectrophotometrically in aqueous media at ionic strength 0.2 for six o,o'-substituted azo dyes, namely C.I. 13900, C.I. 15685, C.I. 18744, C.I. 18760, C.I. 18821 and Calmagite.     

Multiwavelength spectrophotometric determination of acidity constants of 1-（2-thiazolylazo）-2-naphthol in methanol-water mixtures

The acid-base properties of 1-(2-thiazolylazo)-2-naphthol (TAN) in mixtures of methanol-water at 25℃and an ionic strength of 0.1 mol/L are studied by a multi-wavelength spectrophotometric method.The acidity constants of all related equilibria are estimated using the whole spectral fitting of the collected data to an established factor analysis model DATAN program was used for determination of acidity constants.The corresponding pK_a values in methanol-water mixtures were determined.There is a linear relationship between acidity constants and the mole fraction of methanol in the solvent mixtures.     

Multiwavelength spectrophotometric determination of acid dissociation constants Part IV. Water-insoluble pyridine derivatives

A multiwavelength spectrophotometric (WApH) titration method for determination of acid dissociation constants (pK(a) values) of ionizable compounds developed previously was applied in the case of pyridine derivatives of pharmaceutical interest. Specifically, UV absorption spectra of the drug solution are acquired in the course of a pH-metric titration using an optical device based on a fibre optics dip probe, a light source and a diode array detector. Target factor analysis was applied to deduce the pK(a) values from the spectral data recorded at different pH. Using this technique, the pK(a) values of six pyridine derivatives were determined successfully. It was demonstrated that the WApH technique in this case outperforms conventional pH-metric methods with respect to the measurement of pK(a) values of the sparingly water soluble samples reported in this study.     

Derivative spectrophotometric method for determination of acidity constants of single step acid-base equilibria

A general derivative spectrophotometric method for determination of acidity constants is developed. The method appears suitable in cases when classical spectrophotometry cannot be employed due to little differences in the absorption spectra of conjugated acid-base pairs. Based on theoretical considerations, seven variants of the method have been established and their validity was checked, determining acidity constants of lorazepam and flurazepam as model compounds.     

Potentiometric determination of acidity constants of some Schiff bases in tetrahydrofuran-water mixtures

Using potentiometric measurements, dissociation constants of two Schiff bases, N,N′-bis(1′-hydroxy-2′-acetonaphthone)propylenediimine (L₁) and bis(1′-hydroxy-2′-acetonaphthone)-3,3′-diiminodpropaneamine (L₂) were determined in binary mixtures of tetrahydrofuran-water at 25.0 ± 0.1°C and an ionic strength of 0.100 M tetrabutylammonium perchlorate (TBAP). The results show that the pK _a values of these acids increases as the percentages of the tetrahydrofuran increase in solvent mixtures. There is a linear relationship between acidity constants and the mole fraction of tetrahydrofuran in the solvent mixtures. Effect of solvent composition on acidity constants is also discussed.     

Simultaneous spectrophotometric determination of thorium and rare earth metals with pyrimidine azo dyes and cetylpyridinium chloride

Thorium and rare earth elements (REE) react with 5-(2',4'-dimethylphenylazo)6-hydroxypyrimidine-2,4-dione (I) and 5-(4'-nitro-2',6'-dichlorophenylazo)6-hydroxypyrimidine-2,4-dione (II) in the absence of cetylpyridinium chloride (CPC) to form red complexes. The molar absorptivity and Sandell sensitivity were calculated in absence of CPC. In its presence, REE - complexes are not formed due to miceller masking, whereas Th(4+) has a sensitive reaction with the studied reagents I and II, with enhancement of the color intensity of the complex. Most of the foreign ions are tolerated in considerable amounts; 150-2400-fold amounts of rare earth do not interfere with the determination of thorium. The optimum experimental conditions of the complex formation reactions and the compositions of thorium complexes are described. A simple method is proposed for simultaneous determination of thorium and rare earth element without previous separation.     

Spectrophotometric determination of some lanthanides using 3-hydroxy-2-naphthoic acid azo dyes

A comparative spectrophotometric study of the reaction of some substituted phenylazo-3-hydroxy-2-naphthoic acid derivatives with trivalent yttrium, lanthanum, praseodymium, neodymium, samarium, gadolinium, and erbium ions has shown that 1:1 and 1:2 complexes are formed at pH 7–8. Applications of these chelating agents for direct spectrophotometric determination of the lanthanons under investigation and also as indicators for spectrophotometric titration with EDTA were reported. Interference of various cations and anions in this method was also studied. Beer's law was obeyed for metal ions of up to 5–10 ppm.     

Spectrophotometric determination of acidity constants of some anthraquinones and anthrones in methanol-water mixtures

The acidity constants of some synthetic derivatives of 9,10-anthraquinone and 9-anthrone in methanol-water mixtures at 25 degrees have been determined spectrophotometrically. A linear reverse relationship is observed between pK(a1) of all acids and the mole fraction of methanol. The influence of substituents in the molecular structure on the ionization constants is discussed.     

On the use of azo dyes for the spectrophotometric determination of uranium and thorium in mixed solvents

Summary Solochrome Black 6 BN in an acetate buffered medium containing methanol reacts with U(IV) to give a blue complex which permits photometric determination with 5g U/ml to 100g U/ml.In the presence of zinc acetate, uranyl ion also may be spectrophotometrically determined by means of the same dye. From 2g U/ml to 40g U/ml may be determined with a relative error of less than ± 0.05.

---

Zusammenfassung Es werden zwei Methoden zur spektrophotometrischen Bestimmung von Uran mittels Solochromschwarz 6 BN beschrieben. Dieser Farbstoff bildet mit U(IV) in acetatgepuffertem, methanolhältigem Medium einen blaugefärbten Komplex, der die Bestimmung von 5 bis 100g U/ml erlaubt.Mit demselben Farbstoff lassen sich auch 2 bis 40g U/ml in Lösungen von Uranylchlorid bestimmen.

---

Résumé Le noir solochrome 6 BN en milieu tampon acétique contenant du méthanol réagit avec U-IV en donnant un complexe bleu qui permet le dosage photométrique de 5 g U/ml à 100 g U/ml.En présence d'acétate de zinc, on peut aussi doser l'ion uranyle par spectrophotométrie avec le même colorant. On peut doser de 2 g U/ml à 40 g U/ml avec une erreur relative inférieure à ± 0,05.

     

Electrical and optical properties of some azo dyes

The dipole moments of six monoazo dyes were obtained from measurements of their static dielectric constants and refractive indices of dilute solutions in benzene and carbon tetrachloride at temperatures between 20°C and 40°C. Also their lightfastness and absorption spectra (λ_max) were measured.From the results obtained, it was found that there is a linear relationship between the dipole moment, lightfastness and maximum absorption (λ_max) of the monoazo dyes under investigation.     

Analytical aspects of some azo dyes from chromotropic acid

Summary Nitroso-SNADNS-4, itself a yellow coloured dye in acid medium forms a reddish-pink colouration with thorium in weakly acid solution. The colour is stable for about 24 hours and to a temperature up to 50C. The thorium complex shows maximum absorbance at the wave length 520 m, while that of the dye occurs at 430 m. The maximum intensity of colour of the thorium complex is shown at aph 2.5. The colour system conforms to Beer's law in a wide range of concentration of thorium and presents a reliable method for the spectrophotometric determination of the metal even in presence of a large number of common ions, the ions interfering are: tin, iron, nickel, cobalt, cerium(IV), zirconium, gold, phosphate and fluoride. The average percentage of deviation of the absorbance index in the determination of thorium is 1.14.Part VI: See Z. analyt. Chem. 167, 105 (1959)     

Analytical aspects of some azo dyes from chromotropic acid

Summary Complexometric titration of thorium with di-sodium versenate solution has been carried out using three dyes: SNADNS, di-SNADNS and nitroso-SNADNS obtained from chromotropic acid. Determinations are suitable with these dyes in the p_H range from 2 to 3, the colour changes at the end point are very distinct with nitroso-SNADNS and di-SNADNS while the colour change with SNADNS at the end point is very difficult to detect. Study of interferences revealed that quite a number of elements like, lead, zinc, mercury, cobalt, nickel etc. do not interfere, whereas heavy interference is caused by iron, zirconium, copper, gold and alkaline earths, Thorium may be separated from them by precipitating it with phthalanilic acid obtained from o-anisidine and the thorium salt on breaking with acid may be determined by versene by the same method. This titrimetric method is expected to become more accurate if the final measurement at the end point is made spectrophotometrically rather than visually.     

Rapid assay of some azo dyes using solution thermochemistry

Some azo dyes have been assayed using D. I. E. The analysis is completed in less than 1 minute with an average error of 1.05% at the 1 mMole level.The reagent used is titanium(III)chloride. Degassing of the solutions is not necessary.Compared with presently available materials, the proposed procedure has the advantage of speed of assay over a fairly wide range of concentrations of the dyestuffs, the use of simple low cost equipment by semi-skilled personnel and a potential for automation.

---

Zusammenfassung Mittels DIE wurden einige Azofarbstoffe geprüft. Die Analyse wird in weniger als einer Minute mit einem mittleren Fehler von 1.05% für die Grö\enordnung 1 mmol erstellt.Gemessen an gegenwÄrtig erhÄltlichen Substanzen besteht der Vorteil der vorgeschlagenen Methode in der hohen Geschwindigkeit der Messung über einen gro\en Konzentrationsbereich der Farbstoffe, in der Anwendung einer einfachen und kostengünstigen Apparatur sowie in der Möglichkeit zur Automatisierung.