利用空间光调制器实现计算全息三维显示

针对目前三维物体计算全息算法数据量大、计算速度慢及共轭像影响再现效果问题,提出一种全息体视图计算方法。根据人眼双目视差立体视觉原理,由摄像机获取三维物体不同角度的二维序列视差图像,通过计算全息算法得到多视角全息图,合成三维物体全息体视图。在迭代傅里叶变换算法的基础上,采用预设初始相位并增加反馈因子的方法,提高相息图的计算效率。基于液晶空间光调制器构建光学系统,对计算的全息体视图进行了光学再现。结果表明:该方法有效地排除了共轭像的干扰,相息图的迭代计算效率提高30%以上,再现图像与目标图像的结构相似度大于0.85。     

Spatial filtering using poled polymer etalon light modulators

Spatial filtering using poled polymer light modulators is studied. The use of a resonator structure is proposed to minimize the driving voltage. Side-chain polymer poly-orange tom-1 isophoronedisocyanate is used as a material. The measured electro-optic coefficient r ₃₃ is 23 pm/V at the wavelength of 633 nm. Spatial filtering of the input images are realized with 30 V applied voltage.     

计算全息补偿法制作全息凹面光栅的改进

鉴于计算全息图可以产生一个任意形状的波面,用它作为位相补偿板来制作全息凹面光栅以适应消象差的要求比普通光学全息法更具灵活性,而且消象差波长的选择也不受制作时所用的光源光波波长所限制。本文中采用了离轴滤波及改变参考波面特性等措施,大大提高了计算全息图的空间带宽积,扩大了这一方法的使用范围。对1200l/mm的Ⅲ型及Ⅳ型凹面全息光栅进行了设计,制作及实验验证。     

Gradation representation method using a binary-weighted computer-generated hologram based on pulse-width modulation

We propose a simple gradation representation method using a binary-weighted computer-generated hologram(CGH) to be displayed on a high-speed spatial light modulator that can be controlled by the pulse-width modulation technique. The proposed method uses multiple bit planes comprising binary-weighted CGHs with various pulse widths. The object points of a three-dimensional(3D) object are assigned to multiple bit planes according to their gray levels. The bit planes are sequentially displayed in a time-division-multiplexed manner.Consequently, the proposed method realizes a gradation representation of a reconstructed 3D object.     

使用计算全息进行三维信息加密的方法研究

全息加密技术作为一种特殊的加密方法被广泛应用于信息加密和防伪等领域。在全息加密过程中,光波的波长、记录距离和入射角度等参数用做加密密钥和解密密钥被人们深入研究,但所加密的信息几乎都是二维信息。利用一种基于虚拟光学的对三维信息进行加密的方法,将三维物体的大小作为一个新的密钥被引入安全全息加密算法,其安全性能得到了极大提高;在此基础上提出了对再现三维图像进行客观评价的方法,即修正峰值信噪比法(PSNR,PeakSignal-to-Noise Ratio)。模拟实验证明,计算全息方法(CGH,Computer-Generated Hologram)作为一种对三维信息进行加密的方法是可行的,修正PSNR法对再现三维图像的质量进行定量分析是有效的。     

一种用于衍射光元件优化设计的快速算法的研究

讨论了傅里叶迭代算法对初始相位敏感的缺陷机理,提出用伪随机相位编码作为傅里叶迭代算法初始值的改进算法来克服相位敏感缺陷。改进算法具有加快迭代收敛速度、提高恢复图像强度准确性的优点。将该算法产生的任意期望图样的相位全息图写入纯相位液晶空间光调制器上,在远场成功地再现了期望图样。算法迭代10次可产生衍射效率接近85%的一幅相位全息图。作为一种快速相位恢复算法它在相控阵激光雷达以及光束敏捷偏转等领域有重要意义。     

Cell culture device using spatial light modulator

Spatial light modulator is introduced for cell culturing and related illumination experiment. Two kinds of designs were used. The first type put the cell along with the bio-medium directly on top of the analyzer of the microdisplay and set a cover glass on it to retain the medium environment, which turned the microdisplay into a bio-container. The second type introduced an optical lens system placed below the spatial light modulator to focus the light spots on specific position. Details of the advantages and drawbacks for the two different approaches are discussed, and the human melanocyte cell (HMC) is introduced to prove the feasibility of the concept. Results indicate that the second type is much more suitable than the first for precision required application.     

Three-dimensional display using computer-generated hologram based on virtual optics

The technique of using computer-generated hologram (CGH) for 2-D and 3-D display based on virtual optics was researched widely. A new way, modified peak signal to noise ratio (PSNR) method was used to assess 3-D image quality reconstructed by CGH, and an iterative arithmetic was proposed to synthesize CGH perfectly. Furthermore, in the paper a novel way to encrypt 3-D information was proposed. Simulation experiments showed that CGH was an effective encryption technique, and Modified PSNR was a proper definite quantity analysis method for 3-D imaging.     

Application of a liquid crystal spatial light modulator on optical roughness measurements by a speckle correlation method using two refractive indices

A system of roughness measurements using a CCD camera and a liquid crystal spatial light modulator (LCSLM) has been developed. The scattered light patterns from the surface, which is covered by liquids with several different refractive indices, are acquired by the CCD camera and stored in a frame grabber in a computer. The superposition of two arbitrary patterns is calculated by the computer and displayed on the LCSLM. It is then illuminated by coherent light to produce interference fringes of equal inclination at infinity. The surface roughness can be determined through the relationship between the fringe visibility and the difference of refractive indices. The performance of this system is estimated by experiments.     

基于空间光调制器的三维相位全息图再现像优化

在现有的二维图像再现效果改善方法的基础上,对三维物体再现像质量提高的方法进行研究。基于衍射理论,分析了具有有限填充因子空间光调制器的栅格结构对重构图像质量的影响。编入双线性相位因子到纯相位全息图,使得有效光偏移中心光轴传播,让图像细节得到完整重构再现。然后迭加双会聚球面波相位因子,使得各再现像面与空间光调制器栅格结构引起的多级衍射光聚焦平面的位置进行分离,利用光阑和空间滤波器共同作用来消除高级衍射光以及零级光对重构图像质量的影响。搭建了基于LC-SLM的相位全息图光电再现系统用于实验验证。实验结果表明三维物体再现像质量得到明显的提高。     

基于数字闪耀光栅的位相全息图光电再现优化

针对利用液晶空间光调制器（LC-SLM）进行全息图光电再现过程中,再现像面存在多级衍射像造成单一像能量利用率低的问题,提出了一种在位相全息图中加载数字闪耀光栅的方法,以提高全息图光电再现中单一衍射像的衍射效率.分析了闪耀光栅作为衍射光学元件的特性及其对光波进行位相调制的原理,并阐述了在LC-SLM中加载数字闪耀光栅对位相全息图光电再现时像面能量分布的影响.搭建了基于LC-SLM的位相全息图光电再现实验系统.理论分析表明：在其他条件不变的情况下,加载竖直（或水平）槽向周期为2 pixels的数字闪耀光栅可使 关键词： 全息光电再现 位相全息图 数字闪耀光栅 液晶空间光调制器     

利用电光强度调制器频移特性实现可调延迟

针对光纤通信系统中数据同步处理时对脉冲可调延迟的要求,提出了一种可调延迟器的结构设计方案。对电光强度调制器(EOIM)的光频移特性进行了研究,基于EOIM对各级边带和强度的调制作用,利用EOIM对受激布里渊散射慢光装置中的泵浦光进行强度调节,从而实现延迟量可调。建立了可调延迟的数学模型,通过实验研究分别得出了在一定微波调制功率下EOIM调制深度和直流偏置电压随脉冲延迟量的变化关系。从实验结果中可以看出:在引起失真的主要因素为零的情况下,当直流偏置电压为半波电压的1/2时,脉冲相对群延迟随调制深度的增大逐渐减小;当调制深度为1.39时,脉冲相对群延迟随直流偏置电压的增大逐渐增大,延迟量最大可达到未调制情况下的1.106倍,实现了较大范围的延迟量调节。     

利用电光强度调制器频移特性实现可调延迟

针对光纤通信系统中数据同步处理时对脉冲可调延迟的要求,提出了一种可调延迟器的结构设计方案。对电光强度调制器(EOIM)的光频移特性进行了研究,基于EOIM对各级边带和强度的调制作用,利用EOIM对受激布里渊散射慢光装置中的泵浦光进行强度调节,从而实现延迟量可调。建立了可调延迟的数学模型,通过实验研究分别得出了在一定微波调制功率下EOIM调制深度和直流偏置电压随脉冲延迟量的变化关系。从实验结果中可以看出：在引起失真的主要因素为零的情况下,当直流偏置电压为半波电压的1/2时,脉冲相对群延迟随调制深度的增大逐渐减小;当调制深度为1.39时,脉冲相对群延迟随直流偏置电压的增大逐渐增大,延迟量最大可达到未调制情况下的1.106倍,实现了较大范围的延迟量调节。     

Hybrid Binary Joint Transform Correlator For Adaptive Real－time Pattern Recognition

ＨｙｂｒｉｄＢｉｎａｒｙＪｏｉｎｔＴｒａｎｓｆｏｒｍＣｏｒｒｅｌａｔｏｒＦｏｒＡｄａｐｔｉｖｅＲｅａｌ－ｔｉｍｅＰａｔｔｅｒｎＲｅｃｏｇｎｉｔｉｏｎ￥ＷＡＮＧＤａｙｏｎｇ；ＸＩＥＷｅｉｘｉｎＷＡＮＧＤａｙｏｎｇ；ＸＩＥＷｅｉｘｉｎ（Ｄｅｐａｒｔｍｅｎ...     

反射型LCOS器件纯相位调制特性的研究

研究了反射型的LCOS显示器件的相位调制特性.采用2×2的Jones矩阵计算仿真，从理论上分析了它的相位调制特性，建立了一套测量振幅和相位特性的测试系统.它采用He-Ne激光为光源，用干涉仪观察波前相位，将LCOS显示器件作为液晶空间光调制器，用计算机和相关的电路系统驱动控制，并用CCD采样数据，测试了1024×768 LCOS显示器件的相位调制特性.理论和实验的一致性说明了在特定的入射、出射偏振光配制下，LCOS显示器件可以做纯相位调制器. 关键词： 空间光调制器 液晶显示器 反射型LCOS     

基于模糊隶属度的图像空间距离修正插值算法

为解决传统图像插值算法存在的边缘模糊和边缘锯齿,提出了一种基于像素点模糊隶属度的图像自适应插值方法.该方法首先根据图像的梯度与相角特性,确定像素点的模糊隶属度,再根据图像的局部不对称性在一维方向上修正插值点空间距离,并将一维修正结果转化到二维图像空间,最终将修正后的空间距离应用到传统双线性插值和双立方插值中.实验结果表明,该算法改善了图像的信噪比,有效抑制了边缘锯齿和边缘模糊的发生.     

Interpolation Method for Computer-Generated Holograms Using Random Phase Technique

An interpolation method for reconstructed images of computer-generated holograms (CGHs) enables one to synthesize CGHs with a large space bandwidth product (SBWP) from CGHs with a small SBWP. The phase information of objects is regarded as constant because the method is based on digital image processing techniques. Therefore, diffraction efficiency is low due to the saturation effect in the recording process. To improve the diffraction efficiency, a random phase technique is employed for the interpolation method to the CGH. Effects of the random phase in the reconstructed image are discussed in several interpolation types. The interpolation method is also applied to a kinoform. Some computer simulations and optical experiments are presented.     

纯相位液晶空间光调制器相位校正方法

利用泰曼-格林干涉系统,对纯相位液晶空间光调制器在808nm的相位调制特性进行了研究.为了提高其在大气湍流模拟时的仿真度,采用近似法和反插值法对相位调制曲线完成了线性校正,并对校正结果进行了对比分析.结果表明,虽然近似法校正简单易行,但经反插值法校正后,相位调制曲线的线性相关度更高,可达0.9916,校正误差更低,仅为0.06rad.通过对校正方法和误差来源的分析发现,反插值法还具有优化灵活的特点,能进一步改善校正效果,更具应用价值.     

用连续波电光检测技术进行LiNbO3定向耦合波导调制器的场分布测量

本文介绍一种新颖的无损伤检测技术——连续波电光检测技术(OWEOP)对LiNbO_3定向耦合波导调制器模拟样品内场分布进行各种测量所获得的实验结果。采取了背射和端射两种测量方式,测出了波导电极条下,电极间隙区以及电极中断区电场的分布,并对实验结果进行了讨论。     

Light efficiency of liquid crystal spatial light modulator using,for wavefront corrector in AO

Liquid crystal spatial light modulator (LC-SLM) has a series of attractive characteristics as a wavefront corrector in adaptive optics system such as compactness, high density integration, low cost and possibility of batch production. However it also suffers from several drawbacks such as low light efficiency. We present an analysis of the light efficiency of the phase by only using LC-SLM for wavefront corrector in AO system. The factors of polarization sensitive, pixel grid structure, phase quantization and limited phase stroke are discussed in theory. Simulation results are given based on a math model of a LC-SLM. The intensity variation results from pixel structure are measured. The light efficiency of the LC-SLM is tested for generating a series of Zernike aberrations. The effect of phase wrapping method is analyzed and tested. We demonstrate that the light efficiency reduces these factors. Experiment results from the use of the phase only liquid crystal spatial light modulator confirms these conclusions.