钍（Ⅳ）与偶氮溴膦—mB和溴化十四烷基吡啶在乙醇—水溶液中的显色反应及其分

在ｐＨ１￣２的酸性介质中,钍（Ⅳ）与偶氮溴膦－ｍＢ（ＢＰＡｍＢ）形成最大吸收波长（λｍａｘ位于６８６ｎｍ的蓝色络合物,摩尔吸光系数（ε）为８．２７×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。在有少量乙醇存在的０．５￣１．０ｍｏｌ／Ｌ盐酸溶液中,钍（Ⅳ）能与ＢＰＡｍＢ和溴化十四烷基吡啶形成更灵敏的三元络合物,最大吸收位于６９５ｎｍ,具有更大的对比度（Δλ＝１３５ｎｍ）和更高的灵敏度。ε值达１．４１×１０     

显色剂N—烯丙基—N‘—（氨基对苯磺酸钠）硫脲与钯（Ⅱ）显色反应的研究和…

本报道了极易溶于水的显色剂Ｎ－烯丙基－Ｎ＇－（氨基对苯磺酸钠）硫脲光度法测定钯的条件，：在ＰＨ４．０－５．５缓冲介质中，ＡＳＡＴｕ与钯生成易溶于水的、稳定的黄色络合物，组成比为：Ｐｄ（Ⅲ）：ＡＳＡＴｕ＝１：４；络合物的最大吸收波长为２９６．０ｎｍ表观摩尔吸光系数ε２９６＝１．３３×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１；钯（Ⅱ）在０－２０嗳μｇ／２５ｍＬ呈线性，相关系数γ＝０．９９９５。该法灵敏度     

1—（5—溴—2—吡啶偶氮）—2—萘酚—6—磺酸与铁（Ⅱ）显色反应的研究及其应用

本研究了１－（５－溴－２－吡啶偶氮）－２－萘酚－６－磺酸（５－Ｂｒ－ＰＡＮ－Ｓ）与铁（Ⅱ）的显色反应，试验表明，在ｐＨ３－１０范围内铁（Ⅱ）与５－Ｂｒ－ＰＡＮ－Ｓ型成稳定的络合物，络合物在５５０ｎｍ和７５０ｎｍ有二个吸收峰，其表现摩尔吸光系数分别为２．３１×１０＾４和１．７７×１０＾４Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１。络合物组成比为铁（Ⅱ）：５－Ｂｒ－ＰＡＮ－Ｓ＝１：２，络合物稳定常数为１．８２     

5-Br-PADAB分光光度法测定钯

研究了４－（５－溴－２－吡啶偶氮）－１,３－二氨基苯（简称５－Ｂｒ－ＰＡＤＡＢ）分光光度法测定微量钯的反应,在乙酸介质中Ｐｄ（Ⅱ）与５－Ｂｒ－ＰＡＤＡＢ生成紫红色络合物,确定了分光光度法测定钯的新体系。在实验条件下试剂的最大吸收峰位于４３８ｎｍ处,络合物的最大吸收峰位于５６４ｎｍ处,表观摩尔吸光系数ε＝５．２０×１０－４Ｌ／ｍｏｌ．ｃｍ,用等摩尔连续变化法、摩尔比法测得络合比ｎ（Ｐｄ（Ⅱ））∶ｎ（５－Ｂｒ－ＰＡＤＡＢ）＝１∶１,钯离子的量浓度在４．２７×１０－８～１．５４×１０－５ｍｏｌ／Ｌ时,服从Ｂｅｅｒ定律。试验了３０种离子在一定量下不干扰测定。     

7—（对甲酰基苯偶氮）—8—羟基喹啉—5—磺酸的合成及其双波长分光光度…

７－（对甲酰基苯偶氮）－８－羟基喹啉－５－磺酸是一新显色剂，该试剂在微碱性介质中（ｐＨ＝７．５）与镓形成黄色络合物，络合物λｍａｘ＝３９２ｎｍ，摩尔吸光系数ε３９２＝２．２４×１０＾４Ｌ．ｍｃｌ＾－１．ｃｍ＾－１，同时在５００ｎｍ呈现负峰，用双峰双波长法测定镓ε３９２－５００＝６．８９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度是单波长法的三倍多，线性范围０～２．０×１０＾－６ｍｏｌ／Ｌ。用拟定     

4—（2—噻唑偶氮）—2,4—二氨基甲苯与铑显色反应的研究

本研究了４－（２－噻唑偶氮）－２，４－二氨基甲苯（简称ＴＡＤＡＴ）与铑的显色反应。在ｐＨ＝３．７～４．９的酸度范围内试剂与铑形成红色络合物，加入无机酸后色泽加深，络合物的最大吸收位于５９０ｎｍ，表观摩尔吸光系数为１．１×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，其组成为Ｒｈ：ＴＡＤＡＴ＝１：３。铑浓度在０～１２μｇ／２５ｍｌ范围内服从比尔定律。该方法用于模拟样中铑的测定，结果满意。     

2—（5—溴—2—吡啶偶氮）—5—二乙氨基酚与铅（Ⅱ）,锌（Ⅱ）络合平衡的双…

本用双系列线性回归法研究了Ｐｂ（Ⅱ），Ｚｎ（Ⅱ）与５－Ｂｒ－ＰＡＤＡＰ的络合反应，发现在ｐＨ５－６．５，３０％乙醇溶液中，Ｐｂ（Ⅱ）与５－Ｂｒ－ＰＡＤＡＰ形成１：１络合物，Ｚｎ（Ⅱ）主要形成１：２络合物。两种络合物的稳定常数（１ｇβ）分别为１１．１７，２２．３１，最大吸收波长分别为５７５，５５０ｎｍ，摩尔吸光系数分别为６．０１×１０＾４，１．３４×１０＾５Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１。     

铑（Ⅲ）—钼酸盐—罗丹明B显色体系的研究和应用

在聚乙烯醇（ＰＶＡ）存在下，铑（Ⅲ）与钼酸盐和罗丹明Ｂ（ＲＢ）形成离子缔合物，缔合物的最大吸收位于５８０ｎｍ，摩尔吸光系数ε值１．６８×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，服从比耳定律范围０￣１０μｇ Ｒｈ／２５ｍＬ，方法用于催化剂和冶金产品中铑的测定，结果满意。     

安替比林基重氮氨基—2,4—二硝基苯与汞（Ⅱ）的显色反应及其应用

本研究了试剂安替比林基重氮氨基－２４－二硝基苯（ＡＰＤＮＢＴ）与汞的显色反应，在Ｔｗｅｅｎ－８０存在下和ｐＨ＝１０．２～１２．３的缓冲溶液中，ＡＰＤＮＢＴ与汞生成黄色络合物，其络合比为Ｈｇ∶ＡＰＤＮＢＴ＝１∶２，建立了以４４５ｎｍ为参比波长，５３８ｎｍ为测量波长的双波长分光光度法，其表观摩尔吸光系数为２．１×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，线性范围是０     

丁基罗丹明B—钼酸盐光度法连续测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，丁基罗丹明Ｂ（ＢＲＢ）分别与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５７０ｎｍ，表面摩尔吸光度分别为εＣｅ＝３．９６×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，εＳｃ＝４．７１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，服从比耳定律范围分别为０－２４μｇ／Ｌ Ｃｅ和０－６０μｇ／ＬＳｃ，测定极限为Ｃｅ１．０μｇ／Ｌ（ｎ＝１２）和Ｓｃ１．９μｇ／Ｌ（ｎ＝１０），对     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.