Ambient Ionic Liquids Used in the Reduction of Aldehydes and Ketones

The sodium borohydride reduction of aldehydes and ketones to corresponding alcohols has been accomplished via the use of ionic liquids. The alcohols are easily obtained with excellent yields and the ionic liquid BMImBF4 could be reused.     

A Novel Ionic Liquid／water Biphasic System for the Preparation of Oximes

A variety of carbonyl compounds can be converted into oximes efficiently and conveniently in a novel ionic liquid/water bi-phasic system in the presence of sodium bicarbonate at ambient temperature. The ionic liquid 1-butyl-3-methyl imidazolium hexafluorophosphate [bmim]PF6 is immiscible with water or diethyl ether and can be easily recycled for reuse without noticeable droping in activity after separation of the products. The protocol is rapid, the yields are excellent, the method is simple and the ionic liquid can be reused.     

Immobilization of Pd（Ⅱ）Catalysts for Cyclopropanation in Ionic Liquid

Cyclopropanation of styrene with ethyl diazoacetate catalyzed by Pd(Ⅱ） in ionic liquid [omim][BF4] was investigated.Palladium catalysts can be effectively immobilized in ionic liquid.The catalysts PdCl2 and cyclopalladated complex 2 contained in ionic liquid could be recycled for 6 and 7 times,respectively,without losing the efficiency.     

Preparation and Characterization of a Novel Benzimidazolium Bronsted Acid Ionic Liquid and Its Application in the Synthesis of Arylic Esters

A novel Brφnsted acid task specific ionic liquid 1-ethylbenzimidazolium tetrafluoroborate （[Hebim]BF4） with functional benzimidazolium cation was synthesized and characterized by ^1H NMR, IR, MS spectra and elemental analysis. This novel ionic liquid was successfully used as dual solvent-catalyst for the synthesis of arylic esters. Higher yields were obtained in the presence of [Hebim]BF4 in comparison with other imidazolium ionic liquids because of the good solubility of the aromatic alcohols and aromatic carboxylic acids in [Hebim]BF4. The product could be separated conveniently from the reaction system, and the ionic liquid could be easily reused after removal of water under vacuum. After 10 times reuse, the selectivity of the ester was still 100%.     

Immobilization of HX：[Hmim]X as Halogenating Agent, Recyclable Catalyst and Medium for Conversion of Alcohols to Alkyl Halides

HX is immobilized by reaction of halogen acid with methylimidazole, and the formed ionic liquid [Hmim]X was used as halogenating agent, catalyst as well as medium for conversion of alcohols to alkyl halides. Excellent yields were obtained. The halides produced could be easily separated from the reaction mixture via simple decantation, and the ionic liquid [Hmim]X could be regenerated conveniently by adding equivalent of halogen acids followed by removal of water.     

Facile Synthesis of Ureas in lonic Liquid

The reaction of isocyanates with aliphatic and aromatic amines in the l-n-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) ionic liquid in good to excellent yields is described.Due to its insolubility, the desired urea solids could be recovered by simple filtration from the ionic liquid after reaction.     

Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.     

Suzuki Coupling Reaction Catalyzed by Cyclopalladated Complexes of Tertiary Arylamines in Ionic Liquid

Suzuki cross-coupling reaction of phenylboronic acid with aryl halides catalyzed by cyclopalladated complexes of tertiary arylamines immobilized in ionic liquid [Bmim]^＋BF4^- was reported. The catalytic system proved to be efficient and be reused at least 3 times without significant loss of activity.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Reduction of Aldehydes and Ketones with Potassium Borohydride as Reductant

A series of aldehydes and ketones were reduced by potassium borohydride in an ionic liquid/water ([bmim]PF6/H2O) biphasic system to afford corresponding alcohol with high purity in excellent yields. The ionic liquid/water biphasic system could promote the chemoselectivity and the substituents such as nitro group and chlorine remained intact. Aromatic ketones were not as active as aromatic aldhydes and cyclic ketones owing to their higher steric hindrance. The ionic liquid could be recycled and reused. This protocol has notable advantages of no need of phase transfer catalyst and organic solvents, mild conditions, simple operation, short reaction time, ease work-up, high yields and recycling of the ionic liquid.     

The Effect of Ionic Liquid Covalent Bonding to Sol‐Gel Processed Film on Ion Accumulation and Transfer

Accumulation of electroactive anions into a silicate film with covalently bonded room temperature ionic liquid film deposited on an indium tin oxide electrode was studied and compared with an electrode modified with an unconfined room temperature ionic liquid. A thin film containing imidazolium cationic groups was obtained by sol‐gel processing of the ionic liquid precursor 1‐methyl‐3‐(3‐trimethoxysilylpropyl)imidazolium bis(trifluoromethylsulfonyl)imide together with tetramethylorthosilicate on the electrode surface. Profilometry shows that the obtained film is not smooth and its approximate thickness is above 1 μm. It is to some extent permeable for a neutral redox probe – 1,1′‐ferrocene dimethanol. However, it acts as a sponge for electroactive ions like Fe(CN)₆^3?, Fe(CN)₆^4? and IrCl₆^3?. This effect can be traced by cyclic voltammetry down to a concentration equal to 10^?7 mol dm^?3. Some accumulation of the redox active ions also occurs at the electrode modified with the ionic liquid precursor, but the voltammetric signal is significantly smaller compare with the bare electrode. The electrochemical oxidation of the redox liquid t‐butyloferrocene deposited on silicate confined ionic liquid film is followed by the expulsion of the electrogenerated cation into an aqueous solution. On the other hand, the voltammetry obtained with the electrode modified with t‐butyloferrocene solution in the ionic liquid precursor exhibits anion sensitive voltammetry. This is explained by anion insertion into the unconfined ionic liquid deposit following t‐butylferricinium cation formation.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Design of guanidinium ionic liquid based microwave‐assisted extraction for the efficient extraction of Praeruptorin A from Radix peucedani

A series of novel tetramethylguanidinium ionic liquids and hexaalkylguanidinium ionic liquids have been synthesized based on 1,1,3,3‐tetramethylguanidine. The structures of the ionic liquids were confirmed by ¹H NMR spectroscopy and mass spectrometry. A green guanidinium ionic liquid based microwave‐assisted extraction method has been developed with these guanidinium ionic liquids for the effective extraction of Praeruptorin A from Radix peucedani. After extraction, reversed‐phase high‐performance liquid chromatography with UV detection was employed for the analysis of Praeruptorin A. Several significant operating parameters were systematically optimized by single‐factor and L₉ (3⁴) orthogonal array experiments. The amount of Praeruptorin A extracted by [1,1,3,3‐tetramethylguanidine]CH₂CH(OH)COOH is the highest, reaching 11.05 ± 0.13 mg/g. Guanidinium ionic liquid based microwave‐assisted extraction presents unique advantages in Praeruptorin A extraction compared with guanidinium ionic liquid based maceration extraction, guanidinium ionic liquid based heat reflux extraction and guanidinium ionic liquid based ultrasound‐assisted extraction. The precision, stability, and repeatability of the process were investigated. The mechanisms of guanidinium ionic liquid based microwave‐assisted extraction were researched by scanning electron microscopy and IR spectroscopy. All the results show that guanidinium ionic liquid based microwave‐assisted extraction has a huge potential in the extraction of bioactive compounds from complex samples.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

Temperature Dependence of Interactions between Stable Piperidine‐1‐yloxyl Derivatives and an Ionic Liquid

2,2,6,6‐Tetramethylpiperidine‐1‐yloxyl derivatives substituted with either hydrogen bonding [‐OH, ‐OSO₃H] or ionic [‐OSO₃^?Na⁺, ‐OSO₃^?K⁺, N⁺(CH₃)₃I^?, N⁺(CH₃)₃ N^?(SO₂‐CF₃)₂] substituents are investigated in 1‐butyl‐3‐methylimidazolium tetrafluoroborate over a wide temperature range covering both glassy and viscous states. The Vogel–Fulcher–Tammann equation describes the temperature dependence of the ionic liquid viscosity. Quantum chemical calculations of the spin probes at the UB3LYP/6‐311(2d,p++) level are done to describe the dependence of the spin density on nitrogen on the substitution pattern of the 4‐position of the probe. The results of these calculations are also used to understand the experimental results obtained by applying the Spernol–Gierer–Wirtz theory to analyze the viscosity dependence of the rotational correlation time of the spin probes. Significant differences are found between 2,2,6,6‐tetramethylpiperidine‐1‐yloxyl and its derivatives containing substituents that are able to form hydrogen bonds with the ionic liquid. Moreover, derivatives substituted with ionic groups at the 4‐position have a large effect on temperature‐induced solvent viscosity, as this is particularly dependent on the nature of the substituent at the 4‐position. These dependencies include the temperature region that can be used to describe interactions between the spin probes and the ionic liquid, diffusion into the free volume during non‐activated (neutral spin probes) and activated (charged spin probes) processes. Additional parameters are the radii of the ionic liquid and the spin probes, which are calculated and measured approximately. In addition, the temperature dependence of the isotropic hyperfine coupling constants of the spin probes results in information about the micropolarity of the ionic liquid. At room temperature, this is comparable to that of the solvent dimethylsulfoxide.     

离子液体中13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽5,7,12,14(13H)-四酮衍生物的绿色高效合成

在离子液体[bmim+][BF4-]中高产率的合成了一系列13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽-5,7,12,14(13H)-四酮类化合物。该反应操作步骤简单,离子液体易于与产物分离,并且离子液体可以循环使用。     

Reference Electrode for Ionic Liquids

Reference electrodes for room temperature ionic liquid (RTIL) applications were constructed that have a known and reproducible potential versus the ferrocene/ferrocenium couple. They are based on reference electrodes of the first kind, Ag/Ag⁺ couple type, or of the second kind, based on Ag/AgCl in M⁺Cl^?. The former uses AgNO₃ salt and the latter tetrabutylammonium chloride, Bu₄NCl, dissolved in acetonitrile which are then introduced to the ionic liquid of choice for a final concentration of 0.1 M. The reference electrodes can be easily and reproducibly constructed. An ionic contact of these reference systems with the test electrolyte was made using an asbestos fiber liquid junction. The internal compartment of the reference system was filled with the same ionic liquid as used for the electrochemical experiment. The performance of these reference electrodes was tested in selected ionic liquids using the ferrocene/ferrocenium redox couple. The stability, reproducibility, and temperature behavior of the two reference systems have been characterized in the following ionic liquids: 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄), 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI(CF₃SO₂)₂N), and 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIPF₆). It has been found that the formal potentials of the examined reference systems are stable over several days. There is a linear relationship for the temperature studied in the range from 25 to 60 °C.     

Cooperative Effects in Catalytic Hydrogenation Regulated by both the Cation and Anion of an Ionic Liquid

The use of transition‐metal nanoparticles/ionic liquid (IL) as a thermoregulated and recyclable catalytic system for hydrogenation has been investigated under mild conditions. The functionalized ionic liquid was composed of poly(ethylene glycol)‐functionalized alkylimidazolium as the cation and tris(meta‐sulfonatophenyl)phosphine ([P(C₆H₄‐m‐SO₃)₃]^3?) as the anion. Ethyl acetate was chosen as the thermomorphic solvent to avoid the use of toxic organic solvents. Due to a cooperative effect regulated by both the cation and anion of the ionic liquid, the nanocatalysts displayed distinguished temperature‐dependent phase behavior and excellent catalytic activity and selectivity, coupled with high stability. In the hydrogenation of α,β‐unsaturated aldehydes, the ionic‐liquid‐stabilized palladium and rhodium nanoparticles exhibited higher selectivity for the hydrogenation of the C?C bonds than commercially available catalysts (Pd/C and Rh/C). We believe that the anion of the ionic liquid, [P(C₆H₄‐m‐SO₃)₃]^3?, plays a role in changing the surrounding electronic characteristics of the nanoparticles through its coordination capacity, whereas the poly(ethylene glycol)‐functionalized alkylimidazolium cation is responsible for the thermomorphic properties of the nanocatalyst in ethyl acetate. The present catalytic systems can be employed for the hydrogenation of a wide range of substrates bearing different functional groups. The catalysts could be easily separated from the products by thermoregulated phase separation and efficiently recycled ten times without significant changes in their catalytic activity.     

Mass Distribution and Diffusion of [1‐Butyl‐3‐methylimidazolium][Y] Ionic Liquids Adsorbed on the Graphite Surface at 300–800 K

The structure and diffusion behavior of 1‐butyl‐3‐methylimidazolium ([bmim]⁺) ionic liquids with [Cl]^?, [PF₆]^?, and [Tf₂N]^? counterions near a hydrophobic graphite surface are investigated by molecular dynamics simulation over the temperature range of 300–800 K. Near the graphite surface the structure of the ionic liquid differs from that in the bulk and it forms a well‐ordered region extending over 30 Å from the surface. The bottom layer of the ionic liquid is stable over the investigated temperature range due to the inherent slow dynamics of the ionic liquid and the strong Coulombic interactions between cation and anion. In the bottom layer, diffusion is strongly anisotropic and predominantly occurs along the graphite surface. Diffusion perpendicular to the interface (interfacial mass transfer rate k_t) is very slow due to strong ion–substrate interaction. The diffusion behaviors of the three ionic liquids in the two directions all follow an Arrhenius relation, and the activation barrier increases with decreasing anion size. Such an Arrhenius relation is applied to surface‐adsorbed ionic liquids for the first time. The ion size and the surface electrical charge density of the anions are the major factors determining the diffusion behavior of the ionic liquid adjacent to the graphite surface.     

Superfluorinated Ionic Liquid Crystals Based on Supramolecular,Halogen‐Bonded Anions

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen‐bonded supramolecular anions [C_nF_{2 n+1}‐I⋅⋅⋅I⋅⋅⋅I‐C_nF_{2 n+1}]⁻ are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen‐bonded liquid crystals, and 2) imidazolium‐based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.