Mono-N-methylation of functionalized anilines with alkyl methyl carbonates over NaY faujasites. 4. Kinetics and selectivity

[reaction: see text] In the presence of NaY faujasite as the catalyst, the reaction of bifunctional anilines (1-4: XC6H4NH2; X = OH, CO2H, CH2OH, and CONH2) with methyl alkyl carbonates [MeOCO2R': R' = Me or MeO(CH2)2O(CH2)2] proceeds with a very high mono-N-methyl selectivity (XC6H4NHMe up to 99%), and chemoselectivity as well, with other nucleophilic functions (OH, CO2H, CH2OH, CONH2) fully preserved from alkylation and/or transesterification reactions. Aromatic substituents, however, modify the relative reactivity of amines 1-4: good evidence suggests that, not only steric and electronic effects, but, importantly, direct acid-base interactions between substituents and the catalyst are involved. Weakly acidic groups (OH, CH2OH, CONH2, pKa > or = 10) may help the reaction, while aminobenzoic acids (pKa of 4-5) are the least reactive substrates. The solvent polarity also affects the reaction, which is faster in xylene than in the more polar diglyme. The mono-N-methyl selectivity is explained by the adsorption pattern of reagents within the zeolite pores: a B(Al)2 displacement of the amine on methyl alkyl carbonate should occur aided by the geometric features of the NaY supercavities. Different factors account for the reaction chemoselectivity. Evidence proves that the polarizability of the two nucleophilic terms (NH2 and X groups) of anilines is relevant, although adsorption and confinement phenomena of reagents promoted by the zeolite should also be considered.     

Selective n,n-dimethylation of primary aromatic amines with methyl alkyl carbonates in the presence of phosphonium salts

In the presence of onium salts, at 140-170 degrees C, methyl alkyl carbonates [1a-c, ROCO2Me, R = MeO(CH2)2[O(CH2)2]n; n = 2-0, respectively] react with primary aromatic amines (XC6H4NH2, X= p-OMe, p-Me, H, p-Cl, p-CO2Me, o-Et, and 2,3-Me2C6H3NH2) to yield the corresponding N,N-dimethyl derivatives (ArNMe2) with high selectivity (up to 96%) and good isolated yields (78-95%). Phosphonium salts (e.g., Ph3PEtI and n-Bu4PBr) are particularly efficient catalysts. Overall, a solvent-free reaction is coupled with safe methylating agents (1a-c) made from nontoxic dimethyl carbonate.     

beta-Diiminato ligand (L) transformations in reactions of KL with PI3 and I2 [L = {N(C6H3Pr(i)2-2,6)C(H)}2CPh

The reaction of the potassium beta-diiminate KL (L = [{N(Ar)C(H)}(2)CPh](-); Ar = C(6)H(3)Pr(i)(2)-2,6) with PI(3) unexpectedly produced a phosphenium salt of the intermolecularly C,C-coupled ligand [P(I){N(Ar)CH}(2)C(C(6)H(4)-4)C(Ph)(CH[double bond, length as m-dash]NAr)(2)](+)[I(3)](-), while an intramolecularly N,N-coupled salt [N[upper bond 1 start](Ar)C(H)C(Ph)C(H)N[upper bond 1 end](Ar)](+)[I(5)](-) was isolated from KL + I(2).     

Synthesis and structure of CpMo(CO)(dppe)H and its oxidation by Ph3C+

The reaction of CpMo(CO)(dppe)Cl (dppe = Ph2PCH2CH2PPh2) with Na+[AlH2(OCH2CH2OCH3)2]- gives the molybdenum hydride complex CpMo(CO)(dppe)H, the structure of which was determined by X-ray crystallography. Electrochemical oxidation of CpMo(CO)(dppe)H in CH3CN is quasi-reversible, with the peak potential at -0.15 V (vs Fc/Fc+). The reaction of CpMo(CO)(dppe)H with 1 equiv of Ph3C+BF4- in CD3CN gives [CpMo(CO)(dppe)(NCCD3)]+ as the organometallic product, along with dihydrogen and Gomberg's dimer (which is formed by dimerization of Ph3C.). The proposed mechanism involves one-electron oxidation of CpMo(CO)(dppe)H by Ph3C+ to give the radical-cation complex [CpMo(CO)(dppe)H].+. Proton transfer from [CpMo(CO)(dppe)H].+ to CpMo(CO)(dppe)H, loss of dihydrogen from [CpMo(CO)(dppe)(H)2]+, and oxidation of Cp(CO)(dppe)Mo. by Ph3C+ lead to the observed products. In the presence of an amine base, the stoichiometry changes, with 2 equiv of Ph3C+ being required for each 1 equiv of CpMo(CO)(dppe)H because of deprotonation of [CpMo(CO)(dppe)H].+ by the amine. Protonation of CpMo(CO)(dppe)H by HOTf provides the dihydride complex [CpMo(CO)(dppe)(H)2]+OTf-, which loses dihydrogen to generate CpMo(CO)(dppe)(OTf).     

Synthesis and Structure of an Enantiopure Dirhodium Loop with Unusual Axial Coordination

The crystals of enantiopure SS-[cis-Rh2(Ph2C6H4)2(O2CC2F4CO2)]2((CH3)2CHCH2NH2)3(1) were obtained from the reaction of S-[cis-Rh2(Ph2C6H4)2(CH3CN)6]BF4(S-2) and(Et4N)2(O2CC2F4CO2) in CH2Cl2/CH3OH under the presence of sec-butyl amine.Compound 1 crystallizes in orthorhombic,space group P212121 with a = 16.880(5),b = 28.728(9),c = 20.475(6) ,V = 9929(5) 3,Z = 4,C95H96Cl5F8N3O8.50P4Rh4,Mr = 2280.52,Dc = 1.526 g/cm3,F(000) = 4608 and μ(MoKα) = 0.922 mm-1.The final R = 0.0488 and wR = 0.1164 for 17204 observed reflections with I > 2σ(I) and R = 0.0814 and wR = 0.1374 for all data with absolute structure parameter =-0.04(3).Compound 1 contains two inherently chiral S-[cis-Rh2(Ph2C6H4)2] moieties which are connected by two(O2CC2F4CO2) dicarboxylate ligands in the equatorial positions.One of the dirhodium units with Rh-Rh distance of 2.5445(8)  is further coordinated by a sec-butyl amine in each axial position.Another dirohdium unit has only one axial sec-butyl amine ligand,and its Rh-Rh distance is 2.5079(9) .     

Reduction of imines by hydroxycyclopentadienyl ruthenium hydride: intramolecular trapping evidence for hydride and proton transfer outside the coordination sphere of the metal

Reduction of imines by [2,5-Ph2-3,4-Tol2(eta(5)-C4COH)]Ru(CO)2H (2) produces kinetically stable ruthenium amine complexes. Reduction of an imine by 2 in the presence of an external amine trap gives only the complex of the newly generated amine. Reaction of 2 with H2N-p-C6H4N=CHPh (11), which contains an intramolecular amine trap, gave a 1:1 mixture of [2,5-Ph2-3,4-Tol2(eta(4)-C4CO)](CO)2RuNH(CH2Ph)(C6H4-p-NH2) (8), formed by coordination of the newly generated amine to the ruthenium center, and [2,5-Ph2-3,4-Tol2(eta(4)-C4CO)](CO)2RuNH2C6H4-p-NHCH2Ph (9), formed by coordination of the amine already present in the substrate. These results require transfer of hydrogen to the imine outside the coordination sphere of the metal to give a coordinatively unsaturated intermediate that can be trapped inside the initial solvent cage. Amine diffusion from the solvent cage must be much slower than coordination to the metal center. Mechanisms requiring prior coordination of the substrate to ruthenium would have led only to 8 and can be eliminated.     

Mechanistic study of hydrogen transfer to imines from a hydroxycyclopentadienyl ruthenium hydride. Experimental support for a mechanism involving coordination of imine to ruthenium prior to hydrogen transfer

Reaction of [2,3,4,5-Ph(4)(eta(5)-C(4)COH)Ru(CO)(2)H] (2) with different imines afforded ruthenium amine complexes at low temperatures. At higher temperatures in the presence of 2, the complexes decomposed to give [Ru(2)(CO)(4)(mu-H)(C(4)Ph(4)COHOCC(4)Ph(4))] (1) and free amine. Electron-rich imines gave ruthenium amine complexes with 2 at a lower temperature than did electron-deficient imines. The negligible deuterium isotope effect (k(RuHOH)/k(RuDOD) = 1.05) observed in the reaction of 2 with N-phenyl[1-(4-methoxyphenyl)ethylidene]amine (12) shows that neither hydride (RuH) nor proton (OH) is transferred to the imine in the rate-determining step. In the dehydrogenation of N-phenyl-1-phenylethylamine (4) to the corresponding imine 8 by [2,3,4,5-Ph(4)(eta(4)-C(4)CO)Ru(CO)(2)] (A), the kinetic isotope effects observed support a stepwise hydrogen transfer where the isotope effect for C-H cleavage (k(CHNH)/k(CDNH) = 3.24) is equal to the combined (C-H, N-H) isotope effect (k(CHNH)/k(CDND) = 3.26). Hydrogenation of N-methyl(1-phenylethylidene)amine (14) by 2 in the presence of the external amine trap N-methyl-1-(4-methoxyphenyl)ethylamine (16) afforded 90-100% of complex [2,3,4,5-Ph(4)(eta(4)-C(4)CO)]Ru(CO)(2)NH(CH(3))(CHPhCH(3)) (15), which is the complex between ruthenium and the amine newly generated from the imine. At -80 degrees C the reaction of hydride 2 with 4-BnNH-C(6)H(9)=NPh (18), with an internal amine trap, only afforded [2,3,4,5-Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Ph)(C(6)H(10)-4-NHBn) (19), where the ruthenium binds to the amine originating from the imine, showing that neither complex A nor the diamine is formed. Above -8 degrees C complex 19 rearranged to the thermodynamically more stable [Ph(4)(eta(4)-C(4)CO)](CO)(2)RuNH(Bn)(C(6)H(10)-4-NHPh) (20). These results are consistent with an inner sphere mechanism in which the substrate coordinates to ruthenium prior to hydrogen transfer and are difficult to explain with the outer sphere pathway previously proposed.     

Mono-N-methylation of primary amines with alkyl methyl carbonates over Y faujasites. 2. Kinetics and selectivity

In the presence of a Na-exchanged Y faujasite, the reaction of primary aromatic amines 1 with 2-(2-methoxyethoxy)methylethyl carbonate [MeO(CH(2))(2)O(CH(2))(2)OCO(2)Me, 2a] yields the corresponding mono-N-methyl derivatives ArNHMe with selectivity up to 95%, at substantially quantitative conversions. At 130 degrees C, the reaction can be run under diffusion-free conditions and is strongly affected by the solvent polarity: for instance, in going from xylene (epsilon(r) = 2.40) to triglyme (epsilon(r) = 7.62) as the solvent, the pseudo-first-order rate constant for the aniline (1a) disappearance shows a 5-fold decrease. In DMF (epsilon(r) = 38.25), the same reaction does not occur at all. Competitive adsorption of the solvent and the substrate onto the catalytic sites accounts for this result. The behavior of alkyl-substituted anilines ZC(6)H(4)NH(2) [Z = p-Me, p-Et, p-Pr, p-(n-Bu) (1b-e); Z = 3,5-di-tert-butyl- and 2,4,6-tri-tert-butylanilines (1f,g)] and p-alkoxyanilines p-ZC(6)H(4)NH(2) [Z = OMe, OEt, OPr, O-n-Bu (1b'-e')] clearly indicates a steric effect of ring substituents: as diffusion of the amine into the catalytic pores is hindered, the reaction hardly proceeds and the mono-N-methyl selectivity (S(M/D)) drops as well. Moreover, the strength of adsorption of the amine onto the catalyst influences the rate and the selectivity as well: the reaction of p-anisidine and p-toluidine-despite the higher nucleophilicity of these compounds-is slower and even less selective with respect to aniline. From a mechanistic viewpoint, the intermediacy of carbamates ArN(Me)CO(2)R [R = MeO(CH(2))(2)O(CH(2))(2)] is suggested. At 90 degrees C, the reaction of benzylamine (7)-a model for aliphatic amines-with dimethyl carbonate shows that the reaction outcome can be improved by tuning the amphoteric properties of the catalyst: in going from CsY to the more acidic LiY zeolite, methylation is not only more selective (S(M/D) ratio increases from 77% to 84%) but even much faster (CsY, conversion of 36% after 22 h; LiY, conversion of 43% after 7 h).     

Synthesis of methyl carbamates from primary aliphatic amines and dimethyl carbonate in supercritical CO2: effects of pressure and cosolvents and chemoselectivity

[reaction: see text] At 130 degrees C, in the presence of CO2 (5-200 bar), primary aliphatic amines react with dimethyl carbonate (MeOCO2Me, DMC) to yield methyl carbamates (RNHCO2Me) and N-methylation side-products (RNHMe and RNMe2). The pressure of CO2 largely influences both the reaction conversion and the selectivity toward urethanes: in general, conversion goes through a maximum (70-80%) in the midrange (40 bar) and drops at lower and higher pressures, whereas selectivity is continuously improved (from 50% up to 90%) by an increase of the pressure. This is explained by the multiple role of CO2 in (i) the acid/base equilibrium with aliphatic amines, (ii) the reactivity/solubility of RNHCO2- nucleophiles with/in DMC, and (iii) the inhibition of competitive N-methylation reaction of the substrates. Cosolvents also affect the reaction: in particular, a drop in selectivity is observed with polar protic media (i.e., MeOH), plausibly because of solvation effects (through H-bonds) of RNHCO2- moieties. The reaction shows also a good chemoselectivity: bifunctional aliphatic amines bearing either aromatic NH2 or OH substituents [XC6H4(CH2)n NH2, X = NH2, OH; n = 1, 2], undergo methoxycarbonylation reactions exclusively at aliphatic amino groups and give the corresponding methyl carbamates [XC6H4(CH2)n NHCO2Me] in 39-65% isolated yields.     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

Asymmetric allylic amination in water catalyzed by an amphiphilic resin-supported chiral palladium complex

[reaction: see text] Catalytic asymmetric allylic amination of cycloalkenyl carbonates (methyl cyclohexen-2-yl carbonate, methyl cyclohepten-2-yl carbonate, methyl 5-methoxycarbonylcyclohexen-2-yl carbonate, methyl cyclohexenyl carbonate, tert-butyl 5-methoxycarbonyloxy-1,2,5,6-tetrahydropyridinedicarboxylate) with dibenzylamines ((C6H5CH2)2NH, (C6H5CH2)(4-CH3OC6H4CH2)NH, (4-CH3OC6H4CH2)2NH) was achieved in water under heterogeneous conditions by use of a palladium complex of (3R,9aS)-3-[2-(diphenylphosphino)phenyl]-2-phenyltetrahydro-1H-imidazo[1,5-a]indole-1-one anchored on polystyrene-poly(ethylene glycol) copolymer resin to give the corresponding cycloalkenylamines with high enantiomeric selectivity (90-98% ee).     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Hydration of nitrosylruthenium bis(alkynyl) complexes with hydrotris(pyrazolyl)borate: insertion/hydration and double hydration products

Hydration of nitrosylruthenium bis(alkynyl) complex TpRu(CCPh)2(NO) (1) (Tp = BH(pyrazol-1-yl)3) was carried out in the presence of HBF4.Et2O in distilled MeOH and afforded the metallacycle TpRu{CH=C(Ph)C(O)CH(Ph)}(NO) (2) (39%) and the bis(ketonyl) TpRu(CH2C(O)Ph)2(NO) (3) (37%). While double hydration of 1 gave 3, 2 was produced through a combination of insertion and hydration processes. On the other hand, a similar reaction performed in THF instead of MeOH afforded 2 (52%), the acyl-ketonyl complex TpRu(C(O)CH2Ph)(CH2C(O)Ph)(NO) (4) (8.9%), and trace amounts of 3 and TpRu(CCPh)(CH2C(O)Ph)(NO) (5). Moreover, the 1/HBF4.Et2O/H2O reaction system in distilled MeOH at 0 degrees C gave rise to 5 exclusively (79%). Treatment of THF solution of isolated 5 with water in the presence of protic acid furnished 3 and 4, revealing that 5 is the intermediate in their formation.     

Neutral molecular Pd6 hexagons using kappa3-P2O-terdentate ligands

The one-step synthesis of three new P2O-terdentate carboxylic acid ditertiary phosphines 2-{(Ph2PCH2)2N}-3-(X)C6H3CO2H (X = OCH3, L1; X = OH, L2) and 2-{(Ph2PCH2)2N}-5-(OH)C6H3CO2H (L3) by a phosphorus-based Mannich condensation reaction using Ph2PCH2OH and the appropriate amine in CH3OH is reported. Compounds L1-L3 function as typical kappa2-P2-didentate ligands upon complexation to Pd(CH3)Cl(cod) (cod = cycloocta-1,5-diene), affording the neutral, mononuclear complexes Pd(CH3)Cl(L1-L3) (1-3). Metathesis of 1 with NaX (X = Br, I) gave the corresponding (methyl)bromopalladium(II) (4) and (methyl)iodopalladium(II) (5) complexes, respectively. When chloroform or chloroform/methanol solutions of 1-3 (or 5) were allowed to stand, at ambient temperatures, yellow crystalline solids were isolated in very high yields (71-88%) and were analyzed for the novel hexameric palladium(II) compounds 6-9. All new compounds reported have been fully characterized by a combination of spectroscopic (multinuclear NMR, Fourier transform IR, electrospray mass spectrometry, matrix-assisted laser desorption ionization time-of-flight mass spectrometry) and analytical methods. The self-assembly reactions are remarkably clean as monitored by 31P{1H} and 1H NMR spectroscopy. Single-crystal X-ray structures have been determined for L1, 4, 7.17CDCl3.2Et2O, 8.6CHCl3.8CH3OH, and 9.17CDCl3. In hexamers 7-9, all six square-planar palladium(II) metal centers comprise a kappa2-P2-chelating diphosphine, a kappa1-O-monodentate carboxylate, and either a chloride or iodide ligand, leading to 48-membered metallomacrocycles (with outside diameters of ca. 2.5 nm). Whereas only intramolecular O-H...N hydrogen bonding between the hydroxy group and tertiary amine has been observed in 7, strong intermolecular O-H...O hydrogen bonding of the type CO...HO(CH3)...HO, involving a methanol solvate, has been found in 8, leading to an unprecedented three-dimensional network motif.     

Chromium(III) catalysed ethylene tetramerization promoted by bis(phosphino)amines with an N-functionalized pendant

Several N-functionalized bis(phosphino)amine ligands with ether, thioether and pyridyl tethers [(R')2PN(R')P(R')2=PNP] () have been synthesized. They react with CrCl3(THF)3 in CH2Cl2 to give dinuclear chloro bridged Cr2(micro-Cl)2Cl4(PNP)2 () which converts to the corresponding mononuclear solvento complexes fac-CrCl3(PNP)(NCR) (). The structures of the ligand with R'=-(CH2)3SCH3 and R'=Ph, and the complexes with R=CH3 () and C2H5 (), R'=-(CH2)3SCH3 and R'=Ph) have been established by single-crystal X-ray crystallography. All ligands are active towards ethylene tetramerization in the presence of Cr(III) and excess MAO at 80 degrees C in toluene. The ligand with thioether pendant Et2PN(CH2CH2CH2SCH3)PEt2 () shows the highest selectivity (55% weight in liquid product distribution) towards 1-octene. Complexes and are active towards ethylene polymerization under thermal conditions.     

Conversion of phenyl-substituted cyclopentadienes to pyrylium cations

Phenyl-substituted cyclopentadienes are proved to form phenylated pyrylium cations in the presence of silver(I) perchlorate by insertion of an oxygen atom into the cyclopentadiene-ring. Three phenylated pyrylium compounds, [(Ph(5)C(5)O(+))(ClO(4)(-))](2)(CH(2)Cl(2)) (1), Ag(ClO(4))(H(2)O)(Ph(4)HC(5)O(+)) (ClO(4)(-)) (2), and (Ph(3)H(2)C(5)O(+))(ClO(4)(-)) (3) have been synthesized and characterized. A possible reaction pathway and formation mechanism of the pyrylium cation are proposed and discussed.     

Heteroligated metallomacrocycles generated via the weak-link approach

Sequential reaction of two different hemilabile ligands (Ph(2)PCH(2)CH(2)X)(2)Ar (X = S, Ar = C(6)H(4) or C(6)(CH(3))(4); X = NCH(3), Ar = C(6)H(4); X = O, Ar = 9,10-C(14)H(8)) with a Rh(I) metal center resulted in the formation of heteroligated metallomacrocycles in high yield. The specific reaction conditions for each pair of hemilabile ligands are discussed. The solid-state structure of [[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)H(4)]-[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)(CH(3))(4)]Rh(2)](BF(4))(2), as determined by X-ray crystallography, is presented.     

Mechanistic investigations of imine hydrogenation catalyzed by cationic iridium complexes

Complexes [IrH2(eta6-C6H6)(PiPr3)]BF4 (1) and [IrH2(NCMe)3(PiPr3)]BF4 (2) are catalyst precursors for homogeneous hydrogenation of N-benzylideneaniline under mild conditions. Precursor 1 generates the resting state [IrH2{eta5-(C6H5)NHCH2Ph}(PiPr3)]BF4 (3), while 2 gives rise to a mixture of [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)2(PiPr3)]BF4 (4) and [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)(NH2Ph)(PiPr3)]BF4 (5), in which the aniline ligand is derived from hydrolysis of the imine. The less hindered benzophenone imine forms the catalytically inactive, doubly cyclometalated compound [Ir{HN=CPh(C6H4)-kappaN,C}2(NH2CHPh2)(PiPr3)]BF4 (6). Hydrogenations with precursor 1 are fast and their reaction profiles are strongly dependent on solvent, concentrations, and temperature. Significant induction periods, minimized by addition of the amine hydrogenation product, are commonly observed. The catalytic rate law (THF) is rate = k[1][PhN=CHPh]p(H2). The results of selected stoichiometric reactions of potential catalytic intermediates exclude participation of the cyclometalated compounds [IrH{PhN=CH(C6H4)-kappaN,C}(S)2(PiPr3)]BF4 [S = acetonitrile (4), [D6]acetone (7), [D4]methanol (8)] in catalysis. Reactions between resting state 3 and D2 reveal a selective sequence of deuterium incorporation into the complex which is accelerated by the amine product. Hydrogen bonding among the components of the catalytic reaction was examined by MP2 calculations on model compounds. The calculations allow formulation of an ionic, outer-sphere, bifunctional hydrogenation mechanism comprising 1) amine-assisted oxidative addition of H2 to 3, the result of which is equivalent to heterolytic splitting of dihydrogen, 2) replacement of a hydrogen-bonded amine by imine, and 3) simultaneous H delta+/H delta- transfer to the imine substrate from the NH moiety of an arene-coordinated amine ligand and the metal, respectively.