Synthesis of a rare‐metal adsorbing polymer by three‐component polyaddition of diamines,carbon disulfide,and diacrylates in an aqueous/organic biphasic medium

Three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in an aqueous/organic biphasic medium produced a polymer capable of adsorbing rare metals. By using a 1:1 mixture of toluene and H₂O, the polyaddition reaction of 1,3‐di‐4‐piperidylpropane (1), CS₂, and 1,6‐hexanediol diacrylate (2) proceeded efficiently in the presence of Et₃N to produce a poly(dithiourethane‐amine) with a high proportion of dithiourethane units almost quantitatively. Quantitative formation of 1‐CS₂ adducts in the aqueous phase was followed by efficient reaction with diacrylate at the biphasic interface. The resulting poly(dithiourethane‐amine) adsorbed Pd(II) and Pt(IV) efficiently under acidic conditions due to the high affinity of thiocarbonyl sulfur atoms for soft metal ions. The polymers showed highly selective adsorption of Pd(II) from a mixture of metal ions [Pd(II), Cr(III), Cu(II), Fe(III), Mn(II), Pb(II), and Zn(II)], indicating their potential utilization for selective recovery of rare‐metals. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and Fe(III)‐complexation ability of polyurethane bearing kojic acid skeleton in the main chain prepared by polyaddition of aliphatic hydroxyl groups without protection of phenolic hydroxyl groups

Polyaddition of a kojic acid dimer and diisocyanates yielded polyurethane with metal‐coordination ability owing to the phenolic hydroxyl groups of kojic acid. Although the kojic acid dimer contains two phenolic and two aliphatic hydroxyl groups, 1,5‐diazabicyclo[4.3.0]non‐5‐ene catalyzed polymerization proceeded through highly selective reactions of the aliphatic hydroxyl groups without any protection of the phenolic hydroxyl groups. The resulting polymers complexed with FeCl₃, and specific colorizations were observed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chemical synthesis of biodegradable aliphatic polyesters and polycarbonates catalyzed by novel versatile aluminum metal complexes bearing salen ligands

Two novel aluminum metal complexes ( 2 and 3 ) bearing salen ligands were in situ prepared from trimethyl aluminum (AlMe₃), methanol, and (R,R)‐N,N′‐bis(salicylidene)‐1,2‐diaminocyclohexane with original synthetic strategies, and a preliminarily resoluted (R,R)‐1,2‐diaminocyclohexane was applied as a synthetic precursor. By means of Fourier transform infrared spectrometry, NMR spectrometry, mass spectrometry, and single‐crystal X‐ray diffractometry, 2 and 3 were revealed to be distinct molecular structures with corresponding yields of 85 and 10%, respectively. Further studies via ²⁷Al NMR techniques and single‐crystal X‐ray diffraction indicated that dimeric metal complex 3 appeared in the six‐coordinated state, whereas there was a dynamic equilibrium transition between the five‐ and six‐coordinated states for metal complex 2 in a CDCl₃ solution. The more stable dimeric metal complex ( 3 ) exhibited two inequivalent aluminum metal centers coordinated to nitrogen atoms attributed to two different salen ligands, and this was different from the reported salen aluminum complex structures. Furthermore, 2 and 3 were employed as candidate catalysts for the ring‐opening polymerization (ROP) of some important biodegradable aliphatic polyesters and polycarbonates, including poly(?‐caprolactone) (PCL), poly(δ‐valerolactone), poly(trimethylene carbonate), and poly(2,2‐dimethyl trimethylene carbonate). The synthetic results indicated that both metal complexes efficiently catalyzed ROP at 100 °C in an anisole solution, and 3 showed much better controlled characteristics of ROP than 2 . Very narrow molecular weight distributions close to 1.21 for PCL were detected with 3 as the ROP catalyst. In addition, a catalytic mechanism study confirmed that ROP catalyzed by these metal complexes was in good agreement with the commonly accepted coordination polymerization reported for aluminum triiso [Al(OⁱPr)₃] and stannous octanoate [Sn(Oct)₂]. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 373–384, 2005     

Photochemistry of macromolecular metal complexes. II. Synthesis,thermal, and photochemistry of some polypyridyl complexes of chromium (III) bound to macromolecules

Polymer coordinated chromium(III) complexes [Cr(bpy)₂(PAA)₂]⁺, 1 , [Cr(bpy)₂-(PMA)₂]⁺, 2 , [Cr(phen)₂(PAA)₂]⁺, 3 , and [Cr(phen)₂(PMA)₂]⁺, 4 , [where bpy, phen, PAA and PMA are, respectively, 2,2′-bipyridine, 1,10-phenanthroline, poly(acrylic acid), and poly(methacrylic acid)] were synthesized. The polymer–chromium(III) complexes were characterized by elemental and spectroscopic analyses. Thermal substitution reactions of these macromolecular chromium(III) complexes in basic solutions lead to the replacement of the polypyridyl ligand by hydroxide ion while in strong acidic solutions the polymer complexes precipitate out. The photochemical reactions are qualitatively similar to that of the thermal reactions and the quantum yields are dependant on the pH of the medium. Further, lower quantum yields were observed for the aquation of the polymer complexes in comparison with the monomeric chromium(III) complexes and the results are discussed in terms of the effect of the polymer environment. Flash photolysis of 1 and 3 results in the formation of transients with maxima at 480 nm for 1 and 470 nm, 580 nm for 3 . The decay of the transients were found to obey first order kinetics and the rate constants were determined. The transients were suggested to be the alkyl-chromium complexes. Flash photolysis of 2 and 4 does not produce transients which is interpreted to be due to the presence of a methyl group in the ligand which hinders the formation of the carbonchromium bond.     

Three‐component polyaddition of diamines,carbon disulfide,and diacrylates in water

The three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in water was successfully achieved without the use of a surfactant or catalyst. Appropriate reaction conditions (i.e., reaction temperature, reaction time, and CS₂ feed) enabled the polyaddition of 1,3‐di‐4‐piperidylpropane ( 1a ), CS₂, and 1,6‐hexanediol diacrylate ( 2a ) to afford the corresponding poly(dithiourethane‐amine) containing 83% of dithiourethane units in 84% yield. Polyaddition of other monomers also proceeded under the optimum conditions to afford various poly(dithiourethane‐amine)s. Unsuccessful results for polyaddition in organic solvents such as toluene, tetrahydrofuran, and N,N‐dimethylformamide revealed that the polyaddition is accelerated in water. The obtained poly(dithiourethane‐amine)s adsorbed Au (III) efficiently under acidic conditions, due to the strong interaction of the thiocarbonyl sulfur in the dithiourethane unit with Au (III). The poly(dithiourethane‐amine)s also showed selective adsorption for Au (III) from a mixture of metal ions [Au (III), Fe (III), Mn (II), and Zn (II)], which indicates their potential utilization for the collection of gold. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 845–851, 2010     

Transition Metal Complexes of a Salen–Fullerene Diad: Redox and Catalytically Active Nanostructures for Delivery of Metals in Nanotubes

A covalently‐linked salen–C₆₀ (H₂L) assembly binds a range of transition metal cations in close proximity to the fullerene cage to give complexes [M(L)] (M=Mn, Co, Ni, Cu, Zn, Pd), [MCl(L)] (M=Cr, Fe) and [V(O)L]. Attaching salen covalently to the C₆₀ cage only marginally slows down metal binding at the salen functionality compared to metal binding to free salen. Coordination of metal cations to salen–C₆₀ introduces to these fullerene derivatives strong absorption bands across the visible spectrum from 400 to 630 nm, the optical features of which are controlled by the nature of the transition metal. The redox properties of the metal–salen–C₆₀ complexes are determined both by the fullerene and by the nature of the transition metal, enabling the generation of a wide range of fullerene‐containing charged species, some of which possess two or more unpaired electrons. The presence of the fullerene cage enhances the affinity of these complexes for carbon nanostructures, such as single‐, double‐ and multiwalled carbon nanotubes and graphitised carbon nanofibres, without detrimental effects on the catalytic activity of the metal centre, as demonstrated in styrene oxidation catalysed by [Cu(L)]. This approach shows promise for applications of salen–C₆₀ complexes in heterogeneous catalysis.     

Mechanistic insight into initiation and chain transfer reaction of CO2/cyclohexene oxide copolymerization catalyzed by zinc?cobalt double metal cyanide complex catalysts

Although zinc? cobalt (III) double metal cyanide complex (Zn? Co (III) DMCC) catalyst is a highly active and selective catalyst for carbon dioxide (CO₂)/cyclohexene oxide (CHO) copolymerization, the structure of the resultant copolymer is poorly understood and the catalytic mechanism is still unclear. Combining the results of kinetic study and electrospray ionization‐mass spectrometry (ESI‐MS) spectra for CO₂/CHO copolymerization catalyzed by Zn? Co (III) DMCC catalyst, we disclosed that (1) the short ether units were mainly generated at the early stage of the copolymerization, and were hence in the “head” of the copolymer and (2) all resultant PCHCs presented two end hydroxyl (? OH) groups. One end ? OH group came from the initiation of zinc? hydroxide (Zn? OH) bond and the other end ? OH group was produced by the chain transfer reaction of propagating chain to H₂O (or free copolymer). Adding t‐BuOH (CHO: t‐BuOH = 2:1, v/v) to the reaction system led to the production of fully alternating PCHCs and new active site of Zn? Ot‐Bu, which was proved by the observation of PCHCs with one end ? Ot‐Bu (and ? OCOOt‐Bu) group from ESI‐MS and ¹³C NMR spectra. Moreover, Zn?OH bond in Zn? Co (III) DMCC catalyst was also characterized by the combined results from FT‐IR, TGA and elemental analysis. This work provided new evidences that CO₂/CHO copolymerization was initiated by metal? OH bond. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Evaluation of gel electrophoresis conditions for the separation of metal‐tagged proteins with subsequent laser ablation ICP‐MS detection

Although laser ablation (LA)‐ICP‐MS has been reported for the determination of metalloproteins separated by gel electrophoretic techniques (GE), systematic studies that define the conditions essential for successful measurements are still scarce. In this paper we present the results of our studies of basic conditions for the effective application of GE‐LA‐ICP‐MS for the separation of metal‐binding proteins, focusing on their stability during GE and post‐separation gel treatment. The stability of metal–protein complexes (haemoglobin, myoglobin, superoxide dismutase, carbonic anhydrase, transferrin, albumin, cytochrome c) during GE is dependent on the nature of the metal–protein interaction and the principle of separation. We have observed that non‐denaturing GE is a suitable separation technique for most metal–protein complexes (e.g. Zn in carbonic anhydrase and Fe in Tf and myoglobin were quantitatively recovered in a spiked liver cytosol), whereas separation by denaturing GE strongly impaired the stability of the complexes. Equally important is the post‐separation treatment of the gel to enable successful detection of the metal. LA‐ICP‐MS requires drying of the gel without loss of protein‐bound metal or cracking of the gel. This was successfully achieved using glycerol followed by heating. We demonstrate that staining of the gel prior to LA‐ICP‐MS using silver or Coomassie blue is not recommended, since most protein‐bound metal is lost during the staining procedure. Furthermore it has been shown that only line scanning with a speed of less than 30 μm/s can reliably distinguish between lines 1 mm apart, while raster spot analysis carries the risk of misinterpretation due to contamination in/on inhomogeneous gels.     

Copolymerization of carbon dioxide and propylene oxide by several metallosalen‐based bifunctional catalysts

A series of new metallosalen‐based bifunctional catalysts with Co(III), Cr(III), Fe(III), Mn(III), and Ni(III) were synthesized for the first time, and a detailed study on the mechanism of the copolymerization of CO₂ and propylene oxide (PO) was performed. Meanwhile, the impact factors of the reaction conditions (metal cations, temperature, CO₂ pressure, and reaction time) on catalytic activity and selectivity were investigated. The results indicated that, with the increase of temperature, both the catalyst efficiency and the molecular weight of the copolymer decrease for all the five complexes. The salen‐Co(III) complex demonstrated higher activity under mild conditions: reaction temperature at 30 °C, copolymerization time of 24 hr, and 2 MPa of CO₂ pressure. The DSC curve indicated that the PPC by the salen‐Co(III) complex has the highest T_g of 46.19 °C. DTGA curves demonstrated that there were two thermal degradation peaks: the first is for the ester bond, and the second is for the C C bond.     

Alternating copolymerization of carbon dioxide and propylene oxide under bifunctional cobalt salen complexes: Role of Lewis base substituent covalent bonded on salen ligand

Alternating copolymerization of propylene oxide (PO) and carbon dioxide (CO₂) was realized under mild conditions with a moderate turnover frequency (TOF), employing sole bifunctional cobalt salen complexes containing Lewis acid metal center and covalent bonded Lewis base on the ligand. Variation of the covalent bonded Lewis base substituents on the salen ligands could tailor the catalytic activity with TOF changing from 19.3 to 34.9 h^?1, polymeric/cyclic carbonate selectivity from 95.3 to 72.8%, and the head‐to‐tail structure in the polymer from 72.2 to 86.0%. The IR analysis confirmed that the Lewis base moiety on one molecule could coordinate with cobalt center of adjacent molecule, playing similar role to the Salen metal complex/Lewis base binary catalytic system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 359–365, 2010     

Transition metal complexes of tetradentate and bidentate Schiff bases as catalysts for ethylene polymerization: Effect of transition metal and cocatalyst

This article compares catalytic performance of ethylene polymerization in similar polymerization conditions of transition metal complexes having two ligands [O,N] (phenoxy‐imine) and having one tetradentate ligand [O,N,N,O] (salphen or salen). It is shown that the activity of both complex types as well as the product properties depend in the same way on the type of central metal in the complex and on the cocatalyst used. Although the type of ligand has some effect on the catalyst activity, yet it does not control the properties of the obtained products. The vanadium and zirconium complexes, irrespective of the cocatalyst used, yield linear polyethylene with high molecular weight (a few hundred thousand g/mol). Similar products are formed when titanium complexes activated with MAO are employed. On the other hand, the same titanium complexes in conjunction with Et₂AlCl, yield low molecular weight polyethylene (of a few thousand) and additionally a mixture of oligomers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 565–575, 2009     

Tetradentate schiff base ligand/MCln initiating systems for the controlled cationic polymerization of isobutyl vinyl ether: Effects of the ligand framework

We investigated the cationic polymerization of vinyl ethers using metal complex catalysts with salen and salphen ligands. Metal complexes were generated in situ from the reaction of a ligand and a metal chloride. The choice of a ligand and a central metal was crucial for tuning the catalyst function such as catalytic activity and controllability of the polymerization. Among metal chlorides employed, ZrCl₄ was the most efficient for controlled polymerization. Cationic polymerization of isobutyl vinyl ether (IBVE) proceeded using the salen and salphen‐type ligand/ZrCl₄ initiating systems, yielding polymers with predetermined molecular weights and narrow molecular weight distributions. Importantly, the structural effects of the complex catalysts were responsible for the polymerization behavior. For example, the polymerization using the salen‐type ligand/ZrCl₄ system was much slower than that using the salphen‐type ligand/ZrCl₄ system. In addition, the polymerization of IBVE using the salen‐type ligand/FeCl₃ system proceeded in a controlled manner, which was in contrast to uncontrolled polymerization using the salphen‐type ligand/FeCl₃ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 989–996     

Complete assignments of NMR data of salens and their cobalt (III) complexes

Salens, derived from 1,2‐ethylenediamine and salicylaldehydes, have been widely used as ligands for metal complexes which have been showing enormous potential in chemical properties of asymmetric catalysts as well as biological properties such as anticancer agents. Almost all of the salen–metal complexes with their corresponding metal (II)‐complexes show the evidences of chelation of two oxygens in salens. However, several metal (II) complexes, especially cobalt (II) complexes, could not show NMR spectra due to their paramagnetism. Recently, it has been reported that one of the cobalt (III) complexes was used for NMR spectroscopy to evaluate its stereoselectivity as a catalyst. Even though many salen ligands are known, their NMR data are not assigned completely. It was possible that modification in northern part of salen with 2‐hydroxyphenyl group afforded another oxygen chelation site in salen ligand. Here we report that synthesis and full NMR assignment of new salen ligands, which form meso 1,2‐bis(2‐hydroxyphenyl)ethylenediamine) and their cobalt (III) complexes. The assignments of ¹H and ¹³C NMR data obtained in this experiment can help us to predict the NMR data of other salen ligands. Copyright © 2008 John Wiley & Sons, Ltd.     

Aluminum salen and salan complexes in the ring‐opening polymerization of cyclic esters: Controlled immortal and copolymerization of rac‐β‐butyrolactone and rac‐lactide

Aluminum‐based salen and salan complexes mediate the ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (β‐BL), rac‐lactide, and ε‐caprolactone. Al‐salen and Al‐salan complexes exhibit excellent control over the ROP of rac‐β‐butyrolactone, yielding atactic poly(3‐hydroxybutyrate) (PHB) with narrow PDIs of <1.15 for Al‐salen and <1.05 for Al‐salan. Kinetic studies reveal pseudo‐first‐order polymerization kinetics and a linear relationship between molecular weight and percent conversion. These complexes also mediate the immortal ROP of rac‐β‐BL and rac‐lactide, through the addition of excess benzyl alcohol of up to 50 mol eq., with excellent control observed. A novel methyl/adamantyl‐substituted Al‐salen system further improves control over the ROP of rac‐lactide and rac‐β‐BL, yielding atactic PHB and highly isotactic poly(lactic acid) (P_m = 0.88). Control over the copolymerization of rac‐lactide and rac‐β‐BL was also achieved, yielding poly(lactic acid)‐co‐poly(3‐hydroxybutyrate) with narrow PDIs of <1.10. ¹H NMR spectra of the copolymers indicate a strong bias for the insertion of rac‐lactide over rac‐β‐BL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermally latent polyaddition and curing of Di‐ and tri‐functional hemiacetal esters with diepoxide by salen‐zinc complex with tunable catalytic activity and model and networking reactions

Salen‐zinc complexes (Zn/ 1 _R ) thermal‐latently catalyzed the polyaddition of a diepoxide ( 2 ) with a difunctional hemiacetal ester ( 3 ), which proceeded at moderate temperatures (100–150 °C) for curing of mixtures containing monomers and initiators. The catalytic activities of Zn/ 1 _R depended on the Lewis acidities of the complexes controlled by the electronic character of the salen ligands. For example, Zn/ 1 _3,5‐Cl bearing four electron‐withdrawing chlorine atoms initiated the polyaddition at the lowest temperature (100 °C), and Zn/ 1 _OMe bearing two electron‐donating methoxy groups initiated the polyaddition at 120 °C. The Lewis acidities of the complexes were evaluated by NMR and IR spectroscopies and computational calculation. The polyadditions with the salen‐zinc complexes proceeded quantitatively at 150 °C, and the use of a tri‐functional hemiacetal ester ( 7 ) with 2 afforded the corresponding networked polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1427–1439, 2008     

Redox chemistry in thin layers of organometallic complexes prepared using ion soft landing

Soft landing (SL) of mass-selected ions is used to transfer catalytically-active metal complexes complete with organic ligands from the gas phase onto an inert surface. This is part of an effort to prepare materials with defined active sites and thus achieve molecular design of surfaces in a highly controlled way. Solution-phase electrochemical studies have shown that V(IV)O(salen) reacts in the presence of acid to form V(V)O(salen)(+) and the deoxygenated V(III)(salen)(+) complex-a key intermediate in the four electron reduction of O(2) by vanadium-salen. In this work, the V(V)O(salen)(+) and [Ni(II)(salen) + H](+) complexes were generated by electrospray ionization and mass-selected before being deposited onto an inert fluorinated self-assembled monolayer (FSAM) surface on gold. A time dependence study after ion deposition showed loss of O from V(V)O(salen)(+) forming V(III)(salen)(+) over a four-day period, indicating a slow interfacial reduction process. Similar results were obtained when other protonated molecules were co-deposited with V(V)O(salen)(+) on the FSAM surface. In all these experiments oxidation of the V(III)(salen)(+) product occurred upon exposure to oxygen or to air. The cyclic regeneration of V(V)O(salen)(+) upon exposure to molecular oxygen and its subsequent reduction to V(III)(salen)(+) in vacuum completes the catalytic cycle of O(2) reduction by the immobilized vanadium-salen species. Moreover, our results represent the first evidence of formation of reactive organometallic complexes on substrates in the absence of solvent. Remarkably, deoxygenation of the oxo-vanadium complex, previously observed only in highly acidic non-aqueous solvents, occurs on the surface in the UHV environment using an acid which is deposited into the inert monolayer. This acid can be a protonated metal complex, e.g. [Ni(II)(salen) + H](+), or an organic acid such as protonated diaminododecane.     

Hyperbranched polymers as delivery vectors for oligonucleotides

We report on the synthesis and characterization of hyperbranched dimethylaminoethyl methacrylate (DMAEMA) polymers using reversible addition fragmentation chain transfer polymerization. These polymers are unimolecular and globular and hence interact differently with DNA than conventional DMAEMA or block copolymers. The polymers were shown to effectively bind and condense oligonucleotides (ODNs); visualization of the bound complexes was achieved using atomic force microscopy, whereas isothermal titration calorimetry described the thermodynamics of binding. The ODNs were effectively protected from enzymatic degradation (DNAses) when condensed by all the polycations studied. However, internalization of the complexes into HeLa cells was less effective when the polycation was chain extended with polyethyleneglycol monomethylether methacrylate. Conjugation of folic acid to the periphery of the polycation facilitated much enhanced uptake of the oligomeric DNA into the HeLa cells due to overexpression of folate receptors on the surface of HeLa cells. Although significant cytotoxicity was observed at high polymer concentrations, this could be alleviated by shielding of the polycation using poly(ethyleneglycol monomethylether methacrylate). These results suggest that hyperbranched polymers formed in this way exhibit interesting complexation behavior with ODNs and thus are promising models to study as gene delivery vectors. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Group 4 complexes bearing alkoxide functionalized N‐heterocyclic carbene ligands as catalysts in the polymerization of olefins

Novel octahedral zirconium complexes bearing alkoxide functionalized N‐heterocyclic carbene ligands have been synthesized and characterized. NMR analysis showed that more than one species was obtained during synthesis. The synthesized complexes were able to polymerize ethylene and propylene giving rise to a linear polyethylene with high M_w and polydispersity index often bimodal with molecular weight distribution (MDI) > 2, and highly isotactic polypropylene together with an atactic fraction. Density functional theory (DFT) studies on the complex stability indicate the possible species active during the polymerization reaction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Functionalization of Alkynes by a (Salen)ruthenium(VI) Nitrido Complex

Exploring new reactivity of metal nitrides is of great interest because it can give insights to N₂ fixation chemistry and provide new methods for nitrogenation of organic substrates. In this work, reaction of a (salen)ruthenium(VI) nitrido complex with various alkynes results in the formation of novel (salen)ruthenium(III) imine complexes. Kinetic and computational studies suggest that the reactions go through an initial ruthenium(IV) aziro intermediate, followed by addition of nucleophiles to give the (salen)ruthenium(III) imine complexes. These unprecedented reactions provide a new pathway for nitrogenation of alkynes based on a metal nitride.