By means of first‐principles calculations we predict the stability of silicene as buckled honeycomb lattice on passivated substrates of group‐IV(111)1 × 1 surfaces. The weak van‐der‐Waals interaction between silicene and substrates does not destroy its linear bands forming Dirac cones at the Brillouin zone corners. Only very small fundamental gaps are opened around the Fermi level.
High‐speed solution shearing, in which a drop of dissolved material is spread by a coating knife onto the substrate, has emerged as a versatile, yet simple coating technique to prepare high‐mobility organic thin film transistors. Solution shearing and subsequent drying and crystallization of a thin film of conjugated molecules is probed in situ using microbeam grazing incidence wide‐angle X‐ray scattering (μGIWAXS). We demonstrate the advantages of this approach to study solution based crystal nucleation and growth, and identify casting parameter combinations to cast highly ordered and laterally aligned molecular thin films.
The possibility of multiferroicity arising from charge ordering in LuFe2O4 and structurally related rare earth ferrites is reviewed. Recent experimental work on macroscopic indications of ferroelectricity and microscopic determination of coupled spin and charge order indicates that this scenario does not hold. Understanding the origin of the experimentally observed charge and spin order will require further theoretical work. Other aspects of recent research in these materials, such as geometrical frustration effects, possible electric‐field‐induced transitions, or orbital order are also briefly treated.
A new method for fabricating carbon nanotube‐conducting polymer (CNT‐CP) composite single nanowires is reported. The method developed is highly efficient, reliable, and economical because it obviates the time consuming process of template fabrication and the post‐synthesis task of positioning nanowires. Single nanowires with diameters of 50‐500 nm are fabricated between electrodes, self‐templated by dielectrophoresis and electropolymerization. Fabrication of an individually addressed nanowire array with cantilever electrodes on a microchip is demonstrated.
We report on solution‐processible polymer solar cells (PSCs) fabricated on a papery substrate using carton. Highly conductive PEDOT:PSS was used as a bottom anode and planarization layer, and a semi‐transparent top cathode was applied. This research could be an important approach to the development of all‐solution‐processible papery PSCs as well as paper electronics.
Steady‐state and time‐resolved photoluminescence of silicon nanoparticles dispersed in low‐polar liquids at above room temperature is studied. The roles of low‐polar liquids as well as mechanisms responsible for their temperature‐dependent photoluminescence are discussed. The thermal sensitivity of the photoluminescence is estimated and application of the nanoparticles as nanothermometers is proposed.
Multicrystalline silicon wafer solar cells reveal performance‐ reducing defects by luminescence. X‐ray fluorescence spectra are used to investigate the elemental constituents from regions of solar cells yielding reverse‐bias or sub‐bandgap luminescence from defects. It is found that a higher concentration of metals is present in regions yielding reverse‐bias electroluminescence than in regions yielding sub‐bandgap electroluminescence. This suggests, dislocations do not create strong breakdown currents in the absence of impurity precipitates.
We have fabricated multi‐peak and chromaticity‐stable top‐emitting white organic light‐emitting diodes (TEWOLEDs) using single blue emitter. Besides the intrinsic emission of blue emitter, the additional emission can be well realized by simply adjusting the thickness of hole transporting layer (HTL), thus modifying the optical cavity length to obtain different resonant wavelengths. The detailed variation process for multi‐peak spectra with the increase of HTL thickness is studied, which provides a guidance for the design of microcavity TEWOLEDs.
Metallic single‐walled carbon nanotubes (m‐SWCNTs) with excellent conductivity and transparency are considered to be eminent electrode materials. However, it still remains a challenge to separate m‐SWCNTs by their diameters. As reported in this Letter, by effective purification treatment of SWCNTs, we succeeded in achieving diameter separation of m‐SWCNTs using gel column chromatography. TEM and Raman characterizations revealed that metal catalysts and amorphous carbon on tube surfaces were largely reduced, which contributed to the diameter separation of m‐SWCNTs.
We report the fabrication procedure and the characterization of an Al0.3Ga0.7As solar cell containing high‐density GaAs strain‐free quantum dots grown by droplet epitaxy. The production of photocurrent when two sub‐bandgap energy photons are absorbed simultaneously is demonstrated. The high quality of the quantum dot/barrier pair, allowed by the high quality of nanostructured strain‐free materials, opens new opportunities for quantum dot based solar cells.
We demonstrate the monolithic integration of a microstructured organic photodiode with a planar optical stripe waveguide. The manufacturing of this waveguide‐integrated organic photodiode is based on an UV photolithography process. The integration of photodiodes with optical waveguides represents an essential building block in the field of optoelectronic‐photonic integrated circuits.
A thermoplastic polymer solution was inkjet printed in a pre‐defined hexagonal pattern onto carbon fibre reinforced epoxy resin (CFRP), leading to a significant increase in strength, stiffness and toughness of the final aerospace grade compo‐site system. The approach consisted of depositing low‐viscosity polymer microdroplets having chemically and me‐chanically comparable properties to epoxy polymer, onto CFRP before curing and solidification. The microdroplets remained arrested between composite plies without direct contact with the neighbouring microdroplets ensuring preservation of the structural integrity of the new composite system after curing. The key to achieving this synergistic effect was in appropriately selected additive materials; however, the novel aspects also included the method itself, which enabled an accurate crack arrest mechanism.
Interaction between negatively charged Nafion® and a positively charged polybenzimidazole‐decorated carbon nanotube leads to the formation of an ionic complex with high charge density for proton conduction, which can lead to an improvement in transport properties. Here we investigate the high‐temperature and low‐humidity proton conductivity of this nanocomposite membrane as a potential membrane for fuel cell applications.
Write‐once–read‐many‐times memory (WORM) devices were fabricated using Ti/Au and Au as top contacts on ZnO thin films on Si. Electrical characterization shows that both types of WORM devices have large resistance OFF/ON ratio (R ratio), small resistance distribution range, long retention and good endurance. WORM devices with Au top contact have better performance of higher R ratio because of a larger work function of Au compared to Ti.
We study the spin ordering of a quantum dot defined via magnetic barriers in an interacting quantum spin Hall edge. The spin‐resolved density–density correlation functions are computed. We show that strong electron interactions induce a ground state with a highly correlated spin pattern. The crossover from the liquid‐type correlations at weak interactions to the ground state spin texture found at strong interactions parallels the formation of a one‐dimensional Wigner molecule in an ordinary strongly interacting quantum dot.
We have demonstrated high color rendering index (CRI) and chromatic stability of top‐emitting white organic light‐emitting diodes (TEWOLEDs) by capping a supplementary green color conversion layer (CCL) on the cathode of single blue emitter based TEWOLEDs. By employing CCLs, blue photon energy is absorbed and converted to green emission efficiently, resulting in an improvement of CRI from 72 to 86. We attribute the increased high CRI to the broadening of the out‐coupled spectrum and an appropriate intensity match among the three primary colors. Meanwhile, the TEWOLEDs show extremely high chromatic stability. The results indicate that this method provides a new avenue to improve the CRI of TEWOLEDs.
We present metal wrap through (MWT) silicon solar cells with passivated surfaces based on a simplified device structure. This so‐called HIP‐MWT structure (high‐performance metal wrap through) does not exhibit an emitter on the rear side and therefore simplifies processing. The confirmed peak efficiency of the fabricated solar cells with an edge length of 125 mm, screen printed contacts and solder pads is 20.2%. To our knowledge, this is the highest value reported for large‐area p‐type silicon solar cells to date.
Heteroepitaxial growth of kesterite Cu2ZnSnS4 (CZTS) thin film on cubic ZnS(100) single crystal substrate was achieved by radio frequency magnetron sputtering from a single CZTS target. An optimal substrate temperature in the range of 470–500 °C is found suitable for this epitaxial growth. The growth of CZTS was confirmed to be along a‐axis. The sputtered CZTS thin film is homogeneous throughout the whole film. The band gap of the film is found to be approximately 1.51 eV, i.e., promising for high efficiency thin film solar cells.
The structure and electronic properties of the system resulted by epitaxial growth of a single atomic Au layer on a heated Ge(001) surface featured by (2 × 1) reconstruction are studied. The deposition at ～750 K results in a well‐ordered Au surface featured by ripples separated by four times the theoretical distance between two neighboring Au atoms. As revealed by valence‐band photoemission studies, the Au/Ge(001) system has metallic character. Correlating X‐ray photoelectron spectroscopy results with first‐principles calculations we derive the implications on the covalent bonding of Au on the Ge dimer surface.
Optically transparent and high‐quality hybrid ZnO nanoparticle and anthracene embedded polyphenylsiloxane (PPS) glass films were spin‐coated on quartz substrates. A strong Förster resonant energy transfer (FRET) process was indicated by the observation of quenching of the ZnO emission and an enhancement of the anthracene emission at room temperature. The efficiency of this energy transfer between ZnO and the S1 vibronic states of the anthracene molecules can be optimized to exceed 90%.
