A rapid quantitative method for humic substances determination in natural waters

A simple and rapid method was proposed for humic substances (HS) determination at microgram levels in natural waters. This assay method is based on the binding of a dye, Toluidine Blue (TB), to HS molecules to produce a dye-HS complex, which causes a decrease in absorbance at 630 nm. This method was calibrated with HS samples with up to a concentration of 40 mg L⁻¹, which covered the range of dissolved HS concentrations present in natural waters. The detection limit was 0.8 mg L⁻¹ of HS, and the relative standard deviation of 10 replicate measurements for a 20-mg L⁻¹ standard sample was 3.5%. From the Langmuir adsorption isotherm theory, the binding equilibrium constant and total number of binding sites at neutral pH were calculated to be (8.17 ± 0.42) × 10⁵ L mol⁻¹ and N of 1.45 ± 0.04 mmol g⁻¹ HS, respectively. The determination results with five water samples from lake, river and pond were consistent with those measured with the reference methods, demonstrating that this quantification method for HS determination was rapid, sensitive and feasible.     

Pyrolysis of natural and synthetic humic substances

Thermogravimetric and Rock-Eval techniques were used for the characterization of natural (humic) and synthetic (melanoidins) substances and their hydrocarbon generation potential. A similarity between the thermal behaviour of humic substances and of melanoidins (prepared from an excess of sugar) and the unique thermal properties of melanoidins (prepared from basic amino acids) was observed. Rock-Eval analysis indicated that most synthetic melanoidins (also clay-complexed) generated more hydrocarbons and related compounds than terrestrial humic substances.     

Association of Am with humic substances isolated from river waters with different water quality

The association properties of Am with aquatic humic substances in a 0.01M NaClO₄ solution at pH 6-8 were studied on the basis of molecular size distribution. Ten humic substances isolated from river water with different water quality (pH 3.9-8.0 and dissolved organic carbon (DOC) concentration of 2-40 mg/l) were used for comparing their effects on the association of Am. The molecular size distribution of Am in the presence of humic substances from an uncolored river water (DOC 2 mg/l) was different from that at the experimental systems using humic substances from brownish and high DOC (14-40 mg/l) river waters.     

Intermolecular interactions between natural humic substances and tricyclic antidepressants

1. Download : Download high-res image (128KB)
2. Download : Download full-size image

     

The three-dimensional structure of humic substances and soil organic matter studied by computational analytical chemistry

A novel three-dimensional structural concept for humic substances and soil organic matter (SOM) is proposed which is based on previously published, comprehensive investigations combining geochemical, wetchemical, biochemical, spectroscopic, agricultural and ecological data with analytical pyrolysis. Direct, temperature-programmed pyrolysis in the ion-source of the mass spectrometer and soft ionization in very high electric fields (Py-FIMS) and Curie-point pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) were the main applied thermal methods. Emphasis is laid on molecular modelling and geometry optimization of complex, polydisperse structures of biomacromolecules using modern PC software (HyperChem^®). Trapping and binding of atrazine in an organo-mineral complex is introduced as a first example of simulation experiments for soil processes at atomic level (nanochemistry). Future applications of semi-empirical calculations and molecular dynamics in pyrolysis studies are outlined.Dedicated to Professor Dr. Dieter Klockow on the occasion of his 60th birthday     

Removal of iron for the spectrophotometric determination of humic substances in fresh waters

More than 95% iron in water is removed by sorption on a cation-exchange resin after reduction to iron(II) with hydroxylammonium chloride at pH 3.5 for 24 h. The absorbance is then measured at 350 nm for the reliable determination of humic substances.     

Thermofractography of humic substances

Thermofractography (TF) has been applied to humic and fulvic acids from four different soil types. Among the thermal products, 3,5-dihydroxybenzoic acid, catechol, 5-hydroxymethylfurfural, vanillin, phenol, furfural, guaiacol and indole were identified. These are typical fragments from lignins, microbial polyphenols, polysaccharides and proteins.Thermofractography appears to be an effective method for study of humic molecule structures by thermal degradation. Furthermore, it seems promising to differentiate humic acids from distinct soil types and to distinguish between humic and fulvic fractions.

---

Zusammenfassung Die Thermofraktographie (TF) wurde zur Analyse von Humin- und Fulvinsäuren aus vier verschiedenen Bodenarten eingesetzt. Unter den Produkten der Thermolyse wurden die 3,5-Dihydroxy-benzoesäure, Brenzkatechin, 5-Hydroxymethyl-furfurol, Vanillin, Phenol, Furfurol, Guaiakol und Indol identifiziert. Diese sind typische Fragmente aus Lignin, mikrobiellen Polyphenolen, Polysacchariden und Proteinen.Die Thermofraktoraphie scheint eine wirksame Methode zum Studium der Struktur des Huminmoleküls durch thermische Zersetzung zu sein. Außerdem scheint sie auch zur Unterscheidung von Huminsäuren aus bestimmten Bodentypen und zur Unterscheidung von Humin- und Fulvinfraktionen geeignet.

---

Résumé La thermofractographie (TF) a été appliquée à l'analyse des acides humiques et fulviques de quatre types différents de sols. L'acide 3,5-dihydroxybenzoïque, le pyrocatéchol, le 5-hydroxyméthyl-furfural, la vanilline, le phénol, le furfural, le guaacol et l'indole ont été identifiés parmi les produits de la thermolyse. Tous sont des fragments typiques des lignines, des polyphénols microbiens, des polysaccharides et des protéines.La thermofractographie paraît être une méthode efficace pour l'étude par dégradation thermique de la structure moléculaire des substances humiques. En outre, elle semble intéressante pour différencier les acides humiques dans les types de sols particuliers et pour distinguer les fractions humiques et fulviques.

---

( ) . 3.5- , , 5--, , , , . , , . , . , , .

---

---

F. J. G. V. thanks DAAD (Deutsche Akademischer Austauschdienst) for providing a grant.     

Optimization of ionization conditions for analysis of humic substances from natural waters using Electrospray Ionization Fourier Transform Ion Cyclotron Resonance mass spectrometry (ESI FTICR MS)

An approach to optimizing conditions of acquiring Electrospray Ionization Fourier Transform Ion Cyclotron Resonance mass spectra (ESI FTICR MS) was suggested. This method was employed to study the influence of cone voltage and the composition of the solution on peak intensity in ESI FTICR mass spectra of natural water humic substances. A presence of water in methanol solution was shown to reduce signal intensity significantly. The highest integral intensity of peaks selected was reached on 110 mg/l sample solution in acetonitrile and cone voltage 3.0 kV. The number of peaks to which molecular formulas were assigned, including doubly-charged peaks, was increased using these conditions.     

The effect of surfactants on the concentration of heavy metals from natural waters on chelex-100 resin

Trace amounts of zinc, cadmium, copper, nickel, manganese, cobalt and lead can be separated from natural waters on Chelex-100 resin (50–100 mesh) in the presence of cationic, anionic and non-ionic detergents, washing powder and sodium tripolyphosphate at concentrations as high as 100 mg l^-1. Metal recoveries are better than 92% but are poor in the presence of soap or the potential detergent additive, nitrilotriacetic acid. Although strong adsorption of cationic, and to a lesser extent, anionic and non-ionic detergents, occurs on the resin surface, low recoveries can be attributed to incomplete metal elution rather than to blockage of adsorption sites. Experiments with radiotracers show that the total metal present in natural waters is not adsorbed by Chelex-100 unless metal ions are first released from colloids or strong complexes.     

Optimisation of the analytical detection of EDTA by HPLC in natural waters

Reversed-phase ion-pair liquid chromatography is often used to analyse traces of EDTA in natural water samples. Some perturbations due to the presence of major anions in samples, which can compete for ion pair formation with the Fe-EDTA complex used for the detection, have been observed but never estimated and quantified. A new operational method for determining EDTA in natural water samples is proposed by taking into account anion interactions. Qualitative and quantitative analyses of EDTA were performed with a synthetic water at various ionic strengths. From the effect of the ionic strength controlled by CaCl₂, the concentration of the counter-ion tetrabutylammonium bromide (TBA⁺Br^–) and the methanol of the mobile phase, optimal analytical conditions were proposed for a better determination of EDTA concentration. The limit of detection without preconcentration and the reproducibility defined as relative standard deviation were 5 μg/L and 3.6% (n = 12), respectively. This method was applied to natural samples.     

Optimisation of the analytical detection of EDTA by HPLC in natural waters

Reversed-phase ion-pair liquid chromatography is often used to analyse traces of EDTA in natural water samples. Some perturbations due to the presence of major anions in samples, which can compete for ion pair formation with the Fe-EDTA complex used for the detection, have been observed but never estimated and quantified. A new operational method for determining EDTA in natural water samples is proposed by taking into account anion interactions. Qualitative and quantitative analyses of EDTA were performed with a synthetic water at various ionic strengths. From the effect of the ionic strength controlled by CaCl₂, the concentration of the counter-ion tetrabutylammonium bromide (TBA⁺Br^–) and the methanol of the mobile phase, optimal analytical conditions were proposed for a better determination of EDTA concentration. The limit of detection without preconcentration and the reproducibility defined as relative standard deviation were 5 μg/L and 3.6% (n = 12), respectively. This method was applied to natural samples. Received: 15 March 1999 / Revised: 30 March 1999 / Accepted: 31 March 1999     

A green analytical procedure for flow-injection determination of nitrate in natural waters

Nitrate determination in waters is generally carried out with cadmium filings and carcinogenic reagents or by reaction with phenolic compounds in highly concentrated sulfuric acid medium. In this work, it was developed a green analytical procedure for nitrate determination in natural waters based on direct spectrophotometric measurements in ultraviolet, using a flow-injection system with an anion-exchange column for separation of nitrate from interfering species. The proposed method employs only one reagent (HClO₄) in a minimum amount (equivalent to 18 μL concentrated acid per determination), and allowed nitrate determination within 0.50-25.0 mg L⁻¹, without interference of up to 200.0 mg L⁻¹ humic acid; 1.0 mg L⁻¹ NO₂⁻; 200.0 mg L⁻¹ PO₄³⁻; 75.0 mg L⁻¹ Cl⁻; 50.0 mg L⁻¹ SO₄²⁻ and 15.0 mg L⁻¹ Fe³⁺. The detection limit (99.7% confidence level) and the coefficient of variation (n = 20) were estimated as 0.1 mg L⁻¹ and 0.7%, respectively. The results obtained for natural water samples were in agreement with those achieved by the reference method based on nitrate reduction with copperized cadmium at the 95% confidence level.     

Extraction of humic substances from fresh waters on solid-phase cartridges and their study by Fourier transform ion cyclotron resonance mass spectrometry

Humic substances (HS) have been extracted from fresh waters on macroporous adsorbents of different types, Amberlite XAD-8 resin and Bond Elute PPL solid-phase cartridge. Comparative analysis of the extracted samples by ultra-high resolution mass spectrometry demonstrated selectivity of the selected adsorbents to the components of the molecular assembly of HS: the XAD-8 resin has affinity to the higher oxidized aromatic compounds and PPL has affinity to substances of stronger aliphatic character and nitrogen-containing compounds. Because of this fact, a comparison of the molecular composition of HS isolated from various sources must be performed taking into account selective adsorption; therefore, it is necessary to compare the products extracted by the same adsorbent for correct interpretation.     

Interference of humic substances on the speciation analysis of inorganic selenium in waters and soils by DPCSV

A speciation scheme allowing the study of selenium speciation in environmental samples has been developed in order to study the transfer mechanism in the system water/soil/plant/animal. This scheme is based on a set of sample treatment procedures followed by Se(IV) determination by Differential Pulse Cathodic Stripping Voltammetry (DPCSV). Se(IV) may be determined with a detection limit close to 25 ng l^–1 and a linear response in the range 25–4000 ng l^–1. However, humic substances, present in some natural waters and soils, which are adsorbed at the mercury drop electrode (HMDE) surface may alter the signal. This may be caused by a competition between adsorption of organic matter and mercury(II) selenide formation at the electrode surface. As a consequence the detection limit has been increased to ca. 250 ng l^–1 in the presence of 1 mg l^–1 fulvic acids; the linear response range is then shifted to 250–10000 ng l^–1. After an extensive study of these interferences and using standard additions procedures, the Se(IV) content of various waters and soil extracts has been determined by DPCSV with a good reproducibility (RSD about 1%). Accuracy is satisfactory comparing the results obtained by DPCSV to those obtained by Hydride Generation/Quartz Furnace Absorption Atomic Spectrometry (HG/QFAAS).     

Electron microscopy of submicron particles in natural waters—Detection of organic substances

Submicron particles, 0.1–1 m in diameter, in pond water were collected on a 10–20 nm thick carbon film mounted on a carbon coated nylon grid by centrifugation and exposed to osmium(VIII) oxide vapor at room temperature for 2 h. Organic substances reacted with the reagent, while alumino-silicates and hydrated iron(III) oxide as well as the carbon film did not. The X-ray image of osmium revealed that organic substances, presumably humic substances, were associated with most of the particles, especially with hydrated iron (III) oxide, in the pond water.     

Analytical chemistry of freshwater humic substances

Dissolved organic carbon (DOC) in aquatic environments represents one of the largest active organic carbon reservoirs in the biosphere. Current ideologies concerning the sources of DOC, how it is formed and utilized, and what determines the quality of DOC are examined. Humic substances can comprise a significant fraction of the DOC and developments in methods of analysis including the isolation and characterization of this fraction are reviewed.     

Quantification of phenylurea herbicides and their free and humic acid-associated metabolites in natural waters.

There is increasing interest in and demand for simultaneously monitoring pesticides as well as related degradation products (DPs) in natural waters, as the latter compounds can be even more toxic than the former ones. A method for determining parts per trillion levels of phenylurea herbicides and their DPs, that is their dealkylated forms and aromatic amines, is described. This method is based on solid-phase extraction with a Carbograph 4 cartridge followed by liquid chromatography (LC) with electrospray (ES) mass spectrometric detection. A study aimed at optimizing the response of the ES-MS detector for very weakly basic chloroanilines was conducted. Results showed that ion signal intensities of the above species were dependent on the composition of the LC mobile phase to an astonishing degree. At concentration levels of a few hundred ng/l, laboratory experiments showed that the aromatic amines considered here were mostly associated to dissolved humic acids (HAs) by both reversible and irreversible bindings. The addition of a reducing agent, i.e., NaBH4, succeeded in liberating that fraction of aromatic amines, which being reversibly bound to quinoidal structures of HAs are bioavailable. Analyte recoveries were better than 85% on extraction from 4 l of drinking water (spike level, 25 ng/l), 2 l of ground water (spike level, 50 ng/l) and 0.5 l of river water (spike level, 200 ng/l). Relative standard deviations ranged between 4.6 and 20% for drinking water, 4.3 and 15% for ground water, 5.9 and 13% for river water. Method detection limits calculated for drinking water, groundwater and surface water were between 3 and 11, 6 and 21, 36 and 75 ng/l, respectively.     

Spurenanalyse von huminstoffen im trinkwasser: The d.c. polarographic determination of traces of humic substances in potable waters

(The d.c. polarographic determination of traces of humic substances in potable waters) The inhibiting effect of a tri-n-butylphosphate layer adsorbed at the mercury drop on the polarographic wave of copper(II) is reduced by humic substances. This effect can be utilized to determine humic substances in the range 0.05–1 mg l^-1. The standard substance used was isolated from peaty water. Humic and fulvic acids are not differentiated but amino acids, peptides and polyhydroxy compounds do not interfere.