X‐ray photoelectron spectroscopy of miscible poly(methyl methacrylate)/poly(styrene‐co‐acrylonitrile) and immiscible poly(methyl methacrylate)/polyacrylonitrile polymer surfaces metallized by nickel

A miscible blend of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) and an immiscible blend of poly(methyl methacrylate) and polyacrylonitrile were metallized by nickel, and their surfaces were analyzed by X‐ray photoelectron spectroscopy. Before metallization, the heteroatom distribution at the polymer surface was very different in the miscible and immiscible blends. However, this distribution was modified during metallization, which was only possible via polymer‐bond breaking, leading to similar compositions at the two interfaces. Oxygen exhibited a better affinity with nickel than nitrogen, but nickel oxide and nickel nitride were both formed at the interface. Nickel nitride prevented the metal from diffusing into the substrate, playing the role of a barrier, thus driving the oxygen to the metal layer. Amorphous carbon was also detected at the interface as a new carbon species, but it did not have any significant influence on the changes induced in the distribution of heteroatoms at the polymer surfaces. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1408–1416, 2004     

X‐ray photoelectron spectroscopy study of oxygen‐containing polymer [poly(vinyl methyl ether), poly(vinyl methyl ketone), and poly(methyl methacrylate)] surfaces metalized by vacuum‐deposited nickel

Surfaces of poly(vinyl methyl ether) (PVME), poly(vinyl methyl ketone) (PVMK), and poly(methyl methacrylate) (PMMA) were covered with different thicknesses of nickel with a metal‐vapor‐condensation method, and the metal–polymer interfaces were analyzed by X‐ray photoelectron spectroscopy. In the very first steps of the metalization, it was found that a systematic degradation of the polymer surface occurs through CO or CO₂ losses, depending on the polymer functionalities. Then, at the interface with the polymer, the condensed metal reacts by oxidization with the oxygen atoms that are still available after the surface degradation. Nickel oxide is then formed at the interface, whatever the nature of the initial polymer functional group. These new oxide species are not chemically bonded to the polymer structure, and their formation is not affected by the type of bond existing between oxygen and carbon atoms in the original polymer. Finally, the accumulation of metal on the substrate induces an amorphization of the polymer carbon structure because thermal energy is transferred from the metal coating to the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 82–94, 2002     

(Sodium Alginate/Acrylamide) Semi‐Interpenetrating Polymer Networks and their Usability on Removal of Lead,Cadmium, Nickel Ions

In this study, (sodium alginate (NaAlg)/acrylamide (AAm)) interpenetrating polymer networks (IPN) have been prepared at three different compositions, where the sodium alginate composition varies 1, 2, and 3% (w/v) in 50% (w/v) acrylamide solutions. These solutions have been irradiated with a ⁶⁰Co‐γ source at different doses. The percent conversion was determined gravimetrically and 100% gelation was achieved at the 10.0 kGy dose. The swelling results at pH 7.0 and 9.0 indicated that (NaAlg/AAm)3IPN hydrogel, containing 3% NaAlg showed maximum % swelling in water, with swelling increasing in the order of Ni²⁺>Cd²⁺>Pb²⁺. Diffusion in aqueous solutions of metal ions within (NaAlg/AAm)IPN hydrogels was found to be Fickian character. Diffusion coefficients of (NaAlg/AAm)IPN hydrogels in water and aqueous solutions of metal ions were calculated. The maximum weight loss temperature and half life temperature for NaAlg, PAAm, (NaAlg/AAm)IPN and (NaAlg/AAm)IPN‐metal ion systems were found from thermal analysis studies. In the adsorption experiments, the efficiency of (NaAlg/AAm)IPN hydrogels to adsorb nickel, cadmium and lead ions from water was studied. (NaAlg/AAm)IPN hydrogels showed different adsorption for different aqueous solution of metal ion at pH 7.0. Adsorption isotherms were constructed for the (NaAlg/AAm)IPN‐metal ion systems. S type adsorption in the Giles classification system was found.     

Copper nanoparticles seeded functionalized‐PVC plastic surface for electroless nickel deposition

A novel and facile activation process for electroless nickel deposition was developed. The semi‐interpenetrating polymer network hydrogel biofilm was used to functionalize the inert poly(vinyl chloride) (PVC) surface, and then Cu nanoparticles, which can initial the subsequent electroless nickel deposition successfully seeded on the functionalized‐PVC surface. The samples were characterized by scanning electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and transmission electron microscopy. The results show that the hydrogel film provided the PVC surface with amino groups and Cu nanoparticles of 20–50 nm in size could be functioned as the catalytic nuclei for the subsequent electroless metal deposition on PVC plastic. It can be concluded that the novel Cu activation was effective for the nickel deposition on PVC surface, because of more chemisorption sites for Cu nanoparticles generated on PVC surface. Copyright © 2013 John Wiley & Sons, Ltd.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Synthesis and characterization of κ‐carrageenan/poly(N,N‐diethylacrylamide) semi‐interpenetrating polymer network hydrogels with rapid response to temperature

In this study, a novel classical thermo‐ and salt‐sensitive semi‐interpenetrating polymer network (semi‐IPN) hydrogel composed of poly(N,N‐diethylacrylamide) (PDEAm) and κ‐carrageenan (KC) was synthesized by free radical polymerization. The structure of the hydrogels was studied by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR and SEM revealed that the semi‐IPN hydrogels possessed the structure of H‐bonds and larger number of pores in the network. Compared to the PDEAm hydrogel, the prepared semi‐IPN hydrogels exhibited a much faster response rate to temperature changes and had larger equilibrium swelling ratios at temperatures below the lower critical solution temperature (LCST). The salt‐sensitive behavior of the semi‐IPN hydrogels was dependent on the content of KC. In addition, during the reswelling process, semi‐IPN hydrogels showed a non‐sigmoidal swelling pattern. Copyright © 2008 John Wiley & Sons, Ltd.     

Polymer modified biomass of baker's yeast for treating simulated wastewater containing nickel and lead

Baker's yeast was cross‐linked by glutaraldehyde and then modified by grafting with poly(amic acid), which was prepared via reaction of pyromellitic dianhydride (PMDA) and arginine at 50°C. The morphology of the pristine, cross‐linked, and modified biomass was observed by microscope. The presence of poly(amic acid) on the biomass surface was verified by X‐ray photoelectron spectroscopy (XPS) analyses. Due to the high density of the functional groups on the modified biomass surface, the metal adsorption capacity for nickel and lead increased significantly, especially when the carboxylic acid groups were converted into carboxylate ions using NaOH. The adsorption process for nickel and lead adsorption followed the pseudo‐second‐order kinetics. The metal adsorption data were fitted with the Langmuir and Freundlich isotherms with the former having a better fit. Using the Langmuir adsorption isotherm, the maximum uptakes for nickel and lead were found to be 0.848 and 0.980 mmol g^?1 respectively which were about 15 and 11 times higher than the prisitine biomass. In the simulated wastewater containing 0.400 mmol l^?1 of Ni²⁺ and Pb²⁺, the metal adsorption capacity of Ni²⁺ and Pb²⁺ reached 0.365 mmol l^?1 and 0.390 mmol l^?1, respectively. The metal ions loaded biomass was regenerated using Ethylene Diamine Tetraacetic Acid (EDTA) solution and used repeatedly over four cycles with little loss of uptake capacity. Copyright © 2007 John Wiley & Sons, Ltd.     

Metal Chelate Monomers Based on Nickel Maleate and Chelating N‐Heterocycles as Precursors of Core‐shell Nanomaterials with Advanced Tribological Properties

In this study, new metal chelate monomers based on nickel(II) maleate and chelating N‐heterocycles (2,2′‐bipyridine and 1,10‐phenanthroline) were synthesized and characterized. A detailed analysis of the main stages and features of the kinetics of thermal transformations of metal chelate monomers was carried out. Core‐shell nanomaterials containing nanoparticles of nickel oxide and metallic nickel in a stabilizing nitrogen‐containing polymer matrix were obtained by thermolysis of these monomers. The composition, properties and structure of the nanomaterials were studied using IR spectroscopy, thermal analysis, X‐ray diffraction, atomic force microscopy, scanning electron microscopy, high‐resolution transmission electron microscopy, and energy dispersive X‐ray spectroscopy. The tribological characteristics of NiO nanoparticles as lubricant additives were studied using a pin‐on‐disc tribometer. The coefficient of friction (COF) is the lowest at the optimum concentration of nanoparticles and increasing the concentration above the optimum level leads to an increase in COF.     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

Synthesis of nickel nanoparticles supported on metal oxides using electroless plating: Controlling the dispersion and size of nickel nanoparticles

Nickel nanoparticles supported on metal oxides were prepared by a modified electroless nickel-plating method. The process and mechanism of electroless plating were studied by changing the active metal (Ag) loading, acidity, and surface area of metal oxides and were characterized by UV–vis spectroscopy, transmission electron microscopy, scanning electron microscopy, and H₂ chemisorption. The results showed that the dispersion of nickel nanoparticles was dependent on the interface reaction between the metal oxide and the plating solution or the active metal and the plating solution. The Ag loading and acidity of the metal oxide mainly affected the interface reaction to change the dispersion of nickel nanoparticles. The use of ultrasonic waves and microwaves and the change of solvents from water to ethylene glycol in the electroless plating could affect the dispersion and size of nickel nanoparticles.     

Single and binary catalyst systems based on nickel and palladium in polymerization of ethylene

The catalyst (N,N‐bis(2,6‐dibenzhydryl‐4‐ethoxyphenyl)butane‐2,3‐diimine)nickel dibromide, a late transition metal catalyst, was prepared and used in ethylene polymerization. The effects of reaction parameters such as polymerization temperature, co‐catalyst to catalyst molar ratio and monomer pressure on the polymerization were investigated. The α‐diimine nickel‐based catalyst was demonstrated to be thermally robust at a temperature as high as 90 °C. The highest activity of the catalyst (494 kg polyethylene (mol cat)^?1 h^?1) was obtained at [Al]/[Ni] = 600:1, temperature of 90 °C and pressure of 5 bar. In addition, the performance of a binary catalyst using nickel‐ and palladium‐based complexes was compared with that of the corresponding individual catalytic systems in ethylene polymerization. In a study of the catalyst systems, the average molecular weight and molecular weight distribution for the binary polymerization were between those for the individual catalytic polymerizations; however, the binary catalyst activity was lower than that of the two individual ones. The obtained polyethylenes had high molecular weights in the region of 10⁵ g mol^?1. Gel permeation chromatography analysis showed a narrow molecular weight distribution of 1.44 for the nickel‐based catalyst and 1.61 for the binary catalyst system. The branching density of the polyethylenes generated using the binary catalytic system (30 branches/1000 C) was lower than that generated using the nickel‐based catalyst (51/1000 C). X‐ray diffraction study of the polymer chains showed higher crystallinity with lower branching of the polymer obtained. Also Fourier transform infrared spectra confirmed that all obtained polymers were low‐density polyethylene.     

Effect of Sodium Alginate on the Properties of Thermosensitive Hydrogels

Sodium alginate (SA ) was combined with poly(N ‐isopropylacrylamide) (PNIPAAm ) to prepare thermosensitive hydrogels through semi‐interpenetrating polymer network (semi‐IPN ) and fully interpenetrating polymer network (full‐IPN ). The thermosensitive, swelling, mechanical, and thermal properties of pure PNIPAAm , SA /PNIPAAm semi‐IPN , and Ca‐alginate/PNIPAAm full‐IPN hydrogels were investigated. The formation of semi‐IPN and full‐IPN significantly improved the hydrogels’ swelling capability and mechanical properties without altering their thermosensitivity. 5‐Fluorouracil (5‐Fu) was selected as a model drug to study the release behaviors of the hydrogels. It was found that in vitro controlled drug release from semi‐IPN hydrogels showed an initial release burst, followed by a slower and sustained release, before reaching equilibrium. Full‐IPN hydrogels showed slow and sustained release during the whole process. Temperature and pH were found to affect the rate of drug release. Ca‐alginate/PNIPAAm full‐IPN hydrogels have potential application as drug delivery matrices in controlled drug release.     

Preparation of poly(vinylalcohol)/poly(acrylamide‐co‐vinyl imidazole)/γ‐Fe2O3 semi‐IPN nanocomposite and their application for removal of heavy metal ions from water

A series of magnetic semi‐interpenetrating polymer network (semi‐IPN) hydrogels was prepared in one‐stage strategy composed of linear poly(vinyl alcohol) (PVA) chains and magnetic γ‐Fe₂O₃ nanoparticles entrapped within the cross‐linked poly(acrylamide‐co‐vinylimidazole) (poly(AAm‐co‐VI)) network. The influence of PVA, weight ratio of AAm:VI, γ‐Fe₂O₃, and MBA on the swelling properties of the obtained nanocomposite hydrogels was evaluated. The prepared magnetic semi‐IPN hydrogels were fully characterized and used as absorbent for removal of Pb(II) and Cd(II) from water. Factors that influence the metal ion adsorption such as solution pH, contact time, initial metal ion concentration, and temperature were studied in details. The experimental results were reliably described by Langmuir adsorption isotherms. The adsorption capacity of semi‐IPN nanocomposite for Pb(II) and Cd(II) were175.80 and 149.76 mg g^?1, respectively. The kinetic experimental data indicated that the chemical sorption is the rate‐determining step. According to thermodynamic studies, Pb(II) and Cd(II) adsorption on the hydrogels was endothermic and also chemical in nature. The prepared magnetic PVA/poly(AAm‐co‐VI) semi‐IPN hydrogels could be employed as efficient and low‐cost adsorbents of heavy metal ions from water. Copyright © 2016 John Wiley & Sons, Ltd.     

Vinyl polymerizations of norbornene catalyzed by nickel complexes with acetoacetamide ligands

On the basis of a remote effect, a series of acetoacetamide ligands and corresponding nickel complexes N‐(R‐phenyl) acetoacetamide Ni(CH₂Ph) (PMe₃) (R = H, 1 ; R = 2‐methyl, 2 ; R = 2,6‐dimethyl, 3 ; R = 2,6‐diisopropyl, 4 ; R = 4‐NO₂, 5 ) were synthesized and characterized. The solid structure of complex 3 was confirmed by X‐ray single‐crystal analysis to be of cis form. ¹H and ³¹P NMR spectroscopy confirmed that cis and trans isomers of nickel complexes were present in solution. Norbornene polymerizations with acetoacetamide nickel complexes activated with modified methylaluminoxane (MMAO) were investigated in detail. Remote steric and electronic effects of acetoacetamide ligand on catalytic activity and molecular weight of polynorbornenes (PNBs) were observed. Characterizations of the obtained PNBs show that the obtained polymer products are non‐crystalline vinylic‐addition polynorbornenes. Copyright © 2013 John Wiley & Sons, Ltd.     

Electroless deposition of nickel on fluoropolymers modified by surface graft copolymerization

Surface modification of Ar plasma-pretreated poly(tetrafluoroethylene) (PTFE) and poly(vinylidene fluoride) (PVDF) films via UV-induced graft copolymerization with 4-vinylpyridine (4VP), 2-vinylpyridine (2VP) or 1-vinylimidazole (VIDz) was carried out. Electroless deposition of nickel could be carried out on these graft-modified fluoropolymer surfaces after PdCl₂ activation. The surface compositions of the graft-modified films were studied by X-ray photoelectron spectroscopy. The adhesion strength between the surface graft-copolymerized fluoropolymer film and the electrolessly deposited nickel was affected by the type of monomers used for graft copolymerization and the graft concentration. The optimum T-peel adhesion strengths of the electrolessly deposited Ni on the 4VP graft-copolymerized PTFE and PVDF surfaces were about 7 and 13 N/cm, respectively. The metal/fluoropolymer assemblies delaminated by cohesive failure inside the fluoropolymer substrates. The enhanced adhesion between the electrolessly deposited Ni and the surface-modified fluoropolymers is attributable to the interfacial charge transfer interactions between the grafted polymer chains and the deposited metals (Pd and Ni), the spatial distribution of the graft chains into the metal matrix and the covalent tethering of the graft chains on the fluoropolymer surface.     

Ethylene polymerization by bis(salicylaldiminate)nickel(II)/aluminoxane catalysts

The homopolymerization of ethylene by using different catalytic systems based on dinitro‐substituted bis(salicylaldiminate)nickel(II) precursors such as bis[3,5‐dinitro‐N(2,6‐diisopropylphenyl)]nickel(II) and bis[3,5‐dinitro‐N(phenyl)]nickel(II) in combination with organoaluminum compounds was investigated. In particular, the catalytic performances were studied as a function of the main reaction parameters, such as temperature, pressure, Al/Ni molar ratio, and duration. Methylaluminoxane resulted in the best co‐catalyst. Activities up to 200 kg polyethylene/(mol Ni × h) to give a linear high‐molecular‐weight polymer were achieved. The influence of the bulkiness of the substituents on the N‐aryl group of the aldimine ligand was also checked; it resulted in a determinant for catalytic activity rather than for polymer characteristics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2534–2542, 2004     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003     

Annealing effect on the structural and magnetic properties of nickel ferrite thin films

Nickel ferrite is a soft magnetic material with inverse spinel structure. Soft ferrite films are used in microwave devices, integrated planar circuits, etc., because of their high resistivity. In this work, thin films of nickel ferrite were deposited on Si (100) substrate by using pulsed laser deposition (PLD) technique. The thickness of the film was measured by surface profilometer and also by X‐ray reflectivity (XRR). The films were annealed at three different temperatures to observe the effect on the structural and magnetic properties of the film. The films were characterised by X‐ray diffraction (XRD), Raman spectroscopy and vibrating sample magnetometer (VSM) to study the structural and magnetic properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

Activation of Dioxygen at a Lewis Acidic Nickel(II) Complex: Characterization of a Metastable Organoperoxide Complex

In metal‐mediated O₂ activation, nickel(II) compounds hardly play a role, but recently it has been shown that enzymes can use nickel(II) for O₂ activation. Now a low‐coordinate Lewis acidic nickel(II) complex has been synthesized that reacts with O₂ to give a nickel(II) organoperoxide, as proposed for the enzymatic system. Its formation was studied further by UV/Vis absorption spectroscopy, leading to the observation of a short‐lived intermediate that proved to be reactive in both oxygen atom transfer and hydrogen abstraction reactions, while the peroxide efficiently transfers O atoms. Both for the enzyme and for the functional model, the key to O₂ activation is proposed to represent a concomitant electron shift from the substrate/co‐ligand.