Proteome analyses using accurate mass and elution time peptide tags with capillary LC time-of-flight mass spectrometry

We describe the application of capillary liquid chromatography (LC) time-of-flight (TOF) mass spectrometric instrumentation for the rapid characterization of microbial proteomes. Previously (Lipton et al., Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 11049) the peptides from a series of growth conditions of Deinococcus radiodurans have been characterized using capillary LC MS/MS and accurate mass measurements which are captured as an accurate mass and time (AMT) tag database. Using this AMT tag database, detected peptides can be assigned using measurements obtained on a TOF due to the additional use of elution time data as a constraint. When peptide matches are obtained using AMT tags (i.e., using both constraints) unique matches of a mass spectral peak occurs 88% of the time. Not only are AMT tag matches unique in most cases, the coverage of the proteome is high; approximately 3500 unique peptide AMT tags are found on average per capillary LC run. From the results of the AMT tag database search, approximately 900 ORFs detected using LC-TOFMS, with approximately 500 ORFs covered by at least two AMT tags. These results indicate that AMT database searches with modest mass and elution time criteria can provide proteomic information for approximately one thousand proteins in a single run of <3 h. The advantage of this method over using MS/MS based techniques is the large number of identifications that occur in a single experiment as well as the basis for improved quantitation. For MS/MS experiments, the number of peptide identifications is severely restricted because of the time required to dissociate the peptides individually. These results demonstrate the utility of the AMT tag approach using capillary LC-TOF MS instruments, and also show that AMT tags developed using other instrumentation can be effectively utilized.     

Confident assignment of intact mass tags to human salivary cystatins using top-down Fourier-transform ion cyclotron resonance mass spectrometry

A hybrid linear ion-trap Fourier-transform ion cyclotron resonance mass spectrometer was used for top-down characterization of the abundant human salivary cystatins, including S, S1, S2, SA, SN, C, and D, using collisionally activated dissociation (CAD) after chromatographic purification of the native, disulfide intact proteins. Post-translational modifications and protein sequence polymorphisms arising from single nucleotide polymorphisms (SNPs) were assigned from precursor and product ion masses at a tolerance of 10 ppm, allowing confident identification of individual intact mass tags. Cystatins S, S1, S2, SA, and SN were cleaved of a N-terminal 20 amino acid signal peptide and cystatin C a 26-residue peptide, to yield a generally conserved N-terminus. In contrast, cystatin D isoforms with 24 and 28 amino acid residue N-terminal truncations were found such that their N-termini were not conserved. Cystatin S1 was phosphorylated at Ser3, while S2 was phosphorylated at Ser1 and Ser3, in agreement with previous work. Both cystatin D isoforms carried the polymorphism C46R (SNP: rs1799841). The 14,328 Da isoform of cystatin SN previously assigned with polymorphism P31L due to a SNP (rs2070856) was found only in whole saliva. Parotid secretions contained no detectable cystatins while whole saliva largely mirrored the contents of submandibular/sublingual (SMSL) secretions. With fully characterized cystatin intact mass tags it will now be possible to examine the correlation between the abundance of these molecules and human health and disease.     

Quantitation of low molecular mass substrates and products of enzyme catalyzed reactions using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Relative peak-height ratios of products to substrates determined by MALDI-TOFMS allow the quantitative analysis of enzyme catalyzed reactions for screening purposes. Two examples were investigated: the first one was a lipase catalyzed reaction which produces 2-methoxy-N-[(1R)-1-phenylethyl]acetamide (MET) using rac-alpha-phenylethylamine (PEA) as substrate. The second one was the pyruvate decarboxylase catalyzed formation of (1R)-1-hydroxy-1-phenyl-2-propanone (PAC) with benzaldehyde (BzA) as substrate. Here the corresponding oximes were analyzed after derivatization using hydroxylamine. The standard curves (r2 = 0.985 for MET, r2 = 0.991 for PAC) were linear over two orders of magnitude for MET and PAC concentrations. After optimization of the sample preparation an average relative standard deviation of 12.5% was obtained in both cases.     

Encoding method for OBOC small molecule libraries using a biphasic approach for ladder-synthesis of coding tags

In the "one-bead one-compound" (OBOC) combinatorial library method, each compound bead displays only one compound entity. Hundreds of thousands to millions of compound beads can be synthesized rapidly and screened simultaneously. Positive compound beads are then isolated for structural analysis. To fully exploit the power of OBOC combinatorial small molecule libraries, a robust and high throughput encoding method is needed to decode the positive compound beads. In this paper, we report on the development of a novel encoding strategy that combines the concepts of ladder-synthesis and chemical encoding on bilayer beads. In these encoded libraries, small molecule compounds are displayed on the bead surface, and cleavable coding tags consisting of a series of truncated molecules reside in the bead interior. Such a library can be easily constructed using the biphasic approach (J. Am. Chem. Soc.2002, 124, 7678) to topologically segregate the functionalities of the beads during library synthesis. The ladder members and coding tags are then released for MALDI-TOF-MS analysis. To simplify the interpretation of the mass spectra, we purposely add bromine into the cleavable linker so that the cleavage products generate a characteristic isotope fingerprint. The chemical structure of library compounds can be determined by analyzing the mass differences between adjacent peaks on the mass spectra. This encoding strategy also provides valuable information on the quality of the testing compound on the surface of the bead. To validate this methodology, a model OBOC small molecule library with 12,288 members was synthesized on TentaGel beads and screened against streptavidin. The chemical structures of the compound on each positive bead were unambiguously identified.     

Thiol metabolomics of endothelial cells using capillary liquid chromatography mass spectrometry with isotope coded affinity tags

Thiol and disulfide levels are critical to maintaining the redox potential of a cell. Perturbations of these levels are important in disease pathogenesis. To improve endogenous mammalian metabolome quantitation, thiol specific tagging, extraction and relative quantitation were undertaken. Reduced and oxidized thiol (disulfide) metabolites from endothelial cells were tagged and extracted using cleavable isotope coded affinity tags (cICAT). Extracted cICAT labeled thiols were analyzed using capillary reverse phase liquid chromatography coupled to mass spectrometry (capLC-MS) with positive mode electrospray ionization. Reactions between thiol metabolite standards and the reactive group of cICAT indicate completion by 8h at pH 9 with no apparent disulfide formation. cICAT labeled reduced thiols from endothelial cells showed 1-5% RSD using ratiometric quantitation of isotopes and 6-17% RSD based on signal intensity alone. Sample injection was optimized to 16 pmol. Using high mass accuracy MS, 75 putative thiol metabolites were detected in all experimental samples. Treatment of endothelial cells with 2,3-dimethoxy-5-methyl-1,4-benzoquinone (BQ) shows decreased levels in 28 putative reduced thiols and increased levels of 27 putative disulfides. Treatment of endothelial cells with 30 mM glucose resulted in 22 putative reduced thiols with decreased levels and 7 putative disulfides with increased concentration. Thiols were identified based on accurate mass within 3 ppm and analysis of fragmentation patterns. Using higher collision induced dissociation (HCD), shared product ions between different thiols led to the analysis of thiols from the cysteine-glutathione (Cys-GSH) pathway. Specific reduced thiols and disulfides in this pathway revealed changes different from the overall trends of thiols/disulfides. This suggests varying regulation of the Cys-GSH pathway distinct from other thiol-containing pathways and dependence on the type of environmental stimulus. These results indicate the utility of analyzing reduced thiols and disulfides in eukaryotic samples.     

Stereospecific benzylic dehydroxyfluorination reactions using Bio’s TMS-amine additive approach with challenging substrates

Reactions involving the conversion of a benzylic alcohol into a benzylic fluoride using RSF₃ reagents are notoriously difficult to achieve with high stereochemical inversion (S_N2 reaction) due to competing dissociative S_N1 reaction processes. This Letter develops the methodology of Bio et al., and reports that the addition of a preformed 1:TMS-amine 1:RSF₃ (fluorination reagent) complex as the reagent in these reactions significantly suppresses the S_N1 process and promotes a highly stereospecific reaction generating benzylic fluorination products of high %ee.     

A novel method for identification and relative quantification of N-terminal peptides using metal-element-chelated tags coupled with mass spectrometry

By means of the reaction between a DOTA-NHS-ester bifunctional reagent and N-terminal peptides of proteins,and then chelation of lanthanide metal ions as tags,we established a novel method for the identification of N-terminal peptides of proteins and their relative quantification using metal-element-chelated tags coupled with mass spectrometry.The experimental results indicate that metal elements are able to completely label N-terminal peptides at the protein level.The N-terminal peptides are enriched as the peptides digested with trypsin are selectively eliminated by isothiocyanate-coupled silica beads.We successfully identified the N-terminal peptides of 158 proteins of Thermoanaerobacter tengcongensis incubated at 55 and 75°C,among which N-terminal peptides of 24 proteins are partially acetylated.Moreover,metal-element tags with high molecule weights make it convenient for N-terminal peptides consisting of less than 6 amino acids to be identified;these make up 55percent of the identified proteins.Finally,we developed a general approach for the relative quantification of proteins based on N-terminal peptides.We adopted lysozyme and ribonuclease B as model proteins;the correlation coefficients(R2)of the standard curves for the quantitative method were 0.9994 and 0.9997,respectively,with each concentration ratio ranging from0.1 to 10 and both relative standard derivations(RSD)measured at less than 5%.In T.tengcongensis at two incubation temperatures,80 proteins possess quantitative information.In addition,compared with the proteins of T.tengcongensis incubated at 55°C,in T.tengcongensis incubated at 75°C,7 proteins upregulate whereas 16 proteins downregulate,and most differential proteins are related to protein synthesis.     

Surface-assisted laser desorption and ionization mass spectrometry using low-cost matrix-free substrates

Surface-assisted laser desorption/ionization (SALDI) substrates have been fabricated using nanospiked polyurethane (PU) substrates that are replicated by a low-cost soft nanolithography method from silicon nanospike structures formed with femtosecond laser irradiations. The strongest mass spectrometry (MS) signal of Angiotensin II was obtained on 45-nm Au-coated nanospiked PU substrates. The effective ionization appears to be due to surface plasmon excitation. Such low-cost and identical SALDI substrates can be used for MS analysis of various molecules with high reproducibility.     

Intramolecular Baylis-Hillman and morita reactions using unsaturated thiol ester substrates containing enolizable aldehydes

[reaction: see text] Previously unknown intramolecular Baylis-Hillman and Morita reactions involving cyclization of an unsaturated thiol ester onto a pendant aldehyde function are reported. These can be used successfully for the preparation of both cyclopentenols and cyclohexenols, but the results are very sensitive to substrate and precise reaction conditions.     

Investigation of arsine-generating reactions using deuterium-labeled reagents and mass spectrometry

Mass spectrometry was used to detect transfer of deuterium from labeled reagents to arsines following hydride-generation reactions. The arsine gases liberated from the reactions of arsenite, arsenate, methylarsonic acid, and dimethylarsinic acid with HCl and NaBD(4) in H(2)O, or with DCl and NaBH(4) in D(2)O, were examined. Differences in the mode of deuterium incorporation for the various arsines were detected. These results may help explain some of the observed variations in arsine-generation efficiency for various arsenic compounds present in environmental and biological samples.     

Substitution and addition reactions of organic substrates with hypofluorous acid

The chemical reactions of hypofluorous acid with aromatic and olefinic substrates show considerable variety. Hypofluorous acid reacts with naphthalene to give 1-naphthol, 2-naphthol and 1,4-naphtho-quinone; with benzo[b]thiophen to give the 1,1-dioxide; with trans-stilbene to give threo-2-fluoro-1-hydroxy-1, 2-diphenylethane, benzophenone and diphenylacetaldehyde; and with cholesteryl acetate to give the two epoxides (α:β = 6.3:1) and two fluorohydrins (6β-fluoro-5β-o1 and 5α-fluoro-6β-o1).     

Regio- and stereospecific alkyl and alkynyl substitution reactions of epoxy selenides with organoaluminums via episelenonium ions

Regio- and stereospecific alkyl and alkynyl substitution reactions of epoxy selenides with organoaluminum reagents have been developed, which proceed via episelenonium ion intermediates to give the C2 alkyl substitution products with double inversion of the configuration and the C1 alkynyl substitution products with migration of the arylseleno group in high yields, respectively.     

High temperature vapor phase reactions of nitrogen trifluoride with benzylic substrates

At temperatures around 400 °C, nitrogen trifluoride (NF₃) readily reacts with benzylic substrates. Products vary with the substrate, but are all the result of difluoroamination at the benzylic position. Toluene and ethylbenzene produce benzonitrile. Cumene produces α-methylstyrene. Diphenylmethane produces benzanilide. Little or no direct fluorination or radical dimerization is observed.     

Peptides derivatized with bicyclic quaternary ammonium ionization tags. Sequencing via tandem mass spectrometry

Improving the sensitivity of detection and fragmentation of peptides to provide reliable sequencing of peptides is an important goal of mass spectrometric analysis. Peptides derivatized by bicyclic quaternary ammonium ionization tags: 1‐azabicyclo[2.2.2]octane (ABCO) or 1,4‐diazabicyclo[2.2.2]octane (DABCO), are characterized by an increased detection sensitivity in electrospray ionization mass spectrometry (ESI‐MS) and longer retention times on the reverse‐phase (RP) chromatography columns. The improvement of the detection limit was observed even for peptides dissolved in 10 mM NaCl. Collision‐induced dissociation tandem mass spectrometry of quaternary ammonium salts derivatives of peptides showed dominant a‐ and b‐type ions, allowing facile sequencing of peptides. The bicyclic ionization tags are stable in collision‐induced dissociation experiments, and the resulted fragmentation pattern is not significantly influenced by either acidic or basic amino acid residues in the peptide sequence. Obtained results indicate the general usefulness of the bicyclic quaternary ammonium ionization tags for ESI‐MS/MS sequencing of peptides. Copyright © 2014 John Wiley & Sons, Ltd.     

Stereochemistry of the nickel-catalyzed cross-coupling reaction of Grignard reagents with olefinic halides: stereospecific versus nonstereospecific-stereoselective reactions

The nickel-catalyzed cross-coupling reactions of Grignard reagents with monohalo-olefins proceed stereospecifically, while with 1,2-dihaloethylenes they proceed nonstereo-specifically to form cis-olefins stereoselectively in many cases.     

Configurationally stable,enantioenriched organometallic nucleophiles in stereospecific Pd-catalyzed cross-coupling reactions: an alternative approach to asymmetric synthesis

Several research groups have recently developed methods to employ configurationally stable, enantioenriched organometallic nucleophiles in stereospecific Pd-catalyzed cross-coupling reactions. By establishing the absolute configuration of a chiral alkyltin or alkylboron nucleophile prior to its use in cross-coupling reactions, new stereogenic centers may be rapidly and reliably generated with preservation of the known initial stereochemistry. While this area of research is still in its infancy, such stereospecific cross-coupling reactions may emerge as simple, general methods to access diverse, optically active products from common enantioenriched organometallic building blocks. This minireview highlights recent progress towards the development of general, stereospecific Pd-catalyzed cross-coupling reactions using configurationally stable organometallic nucleophiles.