Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐Fused Calix[4]pyrrole

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐fused calix[4]pyrrole, 5 , was obtained starting from (E)‐1,2‐bis(phenylsulfonyl)ethylene. This new calixpyrrole derivative is the prospective precursor of tetrabenzocalix[4]pyrrole, a potential ion‐pair receptor and an attractive species as a possible deep‐walled ‘molecular container’.     

Electrocatalytic oxidation of sulfite by acetylferrocene at glassy carbon electrode

The electrochemical oxidation of sulfite catalyzed by acetylferrocene (AFc) at a glassy carbon electrode (GCE) in 0.2 M NaClO₄ aqueous solution has been studied by cyclic voltammetry. Although sulfite itself showed a sluggish electrochemical response at the GCE, the response could be enhanced greatly by using AFc as a mediator, which enables a sensitive determination of the substrate (sulfite). The reaction rate constant for catalytic oxidation was evaluated as (7.02 ± 0.05) × 10⁴ M ^?1 s^?1 by chronoamperometry. Experimental conditions that maximize the current efficiency of the electrocatalytic oxidation, such as the pH and both the catalyst (AFc) and substrate (sulfite) concentrations, were also investigated. The electrochemical kinetics of electrocatalytic oxidation of sulfite by AFc has been studied by cyclic voltammetry. In the presence of 5 × 10^?4 M AFc, the oxidation current is proportional to the sulfite concentration and the calibration plot was linear over the concentration range 2 × 10^?4–2.4 × 10^?3 M . This result can be applied in the determination of real samples. Copyright © 2005 John Wiley & Sons, Ltd.     

One‐Step Preparation of Electrospun Microfibrous Polystyrene Mats Having Surface Enriched in p‐tert‐Butylcalix[4]arene Fitted with Phosphinoyl Pendant Arms

Polystyrene microfibers containing lower‐rim substituted calix[4]arene with phosphinoyl pendant arms were easily prepared in one‐step procedure by electrospinning. A specific feature of the fibers is the difference in their functionality at the surface and in the bulk. The graded structure of the fibers was shown by XPS analyses. The calix[4]arene concentration in the 3–5 nm surface layer was 50% higher than the theoretically calculated if calix[4]arene was uniformly distributed in the fibers. A six‐coordinated complex was formed between the calix[4]arene included in the fibers and Ni²⁺ ions. The distribution of phosphorus along the fibers is uniform, as evidenced by X‐ray mapping.

     

Catalytic Hydrogenation of meso‐Octamethylporphyrinogen (Calix[4]pyrrole)

Hydrogenation of meso‐octamethylporphyrinogen (calix[4]pyrrole) with a number of heterogeneous catalysts under different experimental conditions has been investigated. GC‐MS analyses of the reaction mixtures showed the formation of one to four products in low to moderate yields: three of them were diastereoisomers of the product derived from half‐hydrogenation of the substrate, and displayed alternating pyrrolidine and pyrrole rings, while the fourth was the all‐cis saturated product. An acidic medium was necessary to achieve hydrogenation. However, the use of too strongly acidic solvents or additives was detrimental to the stability of the substrate and/or the catalyst.     

二苯氨基碳酰肼在多壁碳纳米管修饰电极上的电催化氧化及电化学动力学研究

肼及其衍生物被广泛应用于医药,农药,水处理,军事,航天,光稳定剂以及化工生产助剂等诸多领域。因此对肼及其衍生物的研究有着极其重要的意义。二苯氨基碳酰肼(二苯氨基脲,又名二苯卡巴肼,D iphenyl Carbazide,DPC)广泛用于重金属离子的检测分析[1-4]。但是,目前关于DPC的电化学     

对磺酸基苯偶氮杯[4]芳烃电化学行为研究

以杯[4]芳烃和对氨基苯磺酸为原料,经重氮化-偶联反应合成了对磺酸基苯偶氮杯[4]芳烃,并使用紫外吸收光谱、红外吸收光谱、核磁共振等技术对其进行表征分析. 首次以CH₃COOH-CH₃COONa为缓冲溶液,使用循环伏安法研究对磺酸基苯偶氮杯[4]芳烃的电化学行为. 结果表明,当扫描电位在-0.5 ~ 1 V时,有1对氧化还原峰,其中氧化峰电位为0.302 V,还原峰电位为-0.003 V,且峰电流与峰电位均与扫描速率呈线性关系,推测该峰的形成受扩散控制影响,反应为动力学准一级可逆反应. 进一步利用多种电化学手段研究该电极反应,并求得动力学参数,反应活化能为14.84 kJ•mol^-1.     

Coordination‐Driven Switching of a Preorganized and Cooperative Calix[4]pyrrole Receptor

The study of preorganization in receptors, particularly in cooperative receptors, and their reversible control by external stimuli is important for elucidating design strategies that can lead to increased sensitivity and external control of molecular recognition. In this work we present the design, synthesis, and operation of an asymmetric tetrathiafulvalene (TTF)–calix[4]pyrrole receptor appended with a pyridine moiety. ¹H NMR spectroscopy was employed to demonstrate that intramolecular complexation between the receptor and the pyridine moiety leads to a preorganized receptor. Absorption and ¹H NMR spectroscopy along with a computational investigation were used to demonstrate the ability of the receptor to complex the substrate 1,3,5‐trinitrobenzene (TNB) and that the receptor can be reversibly modulated between negative and positive cooperativity by employing external stimuli in the form of Zn^II. Fitting procedures incorporating multiple datasets and fitting to multiple equilibria simultaneously have been employed to quantitatively determine the preorganization effects.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.     

吡罗昔康在纳米Fe_3O_4-石墨烯复合修饰玻碳电极上的电化学行为及电分析研究

采用纳米Fe3O4粒子(nano-Fe3O4)和石墨烯(Reduced Graphene Oxide,RGO)制备了nano-Fe3O4-RGO复合材料修饰玻碳电极(nano-Fe3O4-RGO/GCE),采用循环伏安法(cyclic voltammetry,CV),方波伏安法(square wave voltammetry,SWV),计时电流法(chronoamperometry,CA),计时库仑法(chronocoulometry,CC)研究了吡罗昔康(Piroxicam,PC)在此复合修饰电极上的电化学行为及电化学动力学性质。实验结果表明,与GCE相比,nano-Fe3O4-RGO/GCE对PC的电化学氧化作用有显著的促进作用,其氧化峰电流显著增加;对各种实验条件进行了优化,测得峰电流Ipa与PC浓度在2.0×10-6~2.0×10-4mol·L-1范围内呈良好的线性关系,检出限(S/N=3)为5.3×10-7mol·L-1,加标回收率为100.0%~104.0%。该方法快速,灵敏,并将nano-Fe3O4-RGO/GCE用于市售吡罗昔康片剂的测定,结果符合定量测定要求。     

Surface oxidation process of a diamond‐like carbon film analyzed by difference X‐ray photoelectron spectroscopy

Difference X‐ray photoelectron spectroscopy (D‐XPS) revealed the surface oxidation process of a diamond‐like carbon (DLC) film. Evaluation of surface functional groups on DLC solely by the C 1s spectrum is difficult because the spectrum is broad and has a secondary asymmetric lineshape. D‐XPS clarified the subtle but critical changes at the DLC surface caused by wet oxidation. The hydroxyl (C―OH) group was dominant at the oxidized surface. Further oxidized carbonyl (C?O) and carboxyl (including carboxylate) (COO) groups were also obtained; however, the oxidation of C?O to COO was suppressed to some extent because the reaction required C―C bond cleavage. Wet oxidation cleaved the aliphatic hydrogenated and non‐hydrogenated sp² carbon bonds (C―H sp² and C―C sp²) to create a pair of C―OH and hydrogenated sp³ carbon (C―H sp³) bonds. The reaction yield for C―H sp² was superior at the surface, suggesting that the DLC film was hydrogen rich at the surface. Oxidation of aromatic sp² rings or polycyclic aromatic hydrocarbons such as nanographite to phenols did not occur because of their resonance stabilization with electron delocalization. Non‐hydrogenated sp³ carbon (C―C sp³) bonds were not affected by oxidation, suggesting that these bonds are chemically inert. Copyright © 2014 John Wiley & Sons, Ltd.     

含硫杯[4]芳烃衍生物修饰电极伏安行为的研究

杯芳烃具有与环糊精类似的洞穴结构,且具有可调节大小的洞穴,有卓越的络合识别能力,杯芳烃衍生物的研究引起了国内外众多化学工作者极大的兴趣,在识别-催化、识别-配合、识别-分析等领域取得了可喜的研究成果。Stuart等研究了亚铁氰化钾及铁氰化钾在杯[4]间苯二酚修饰金电极上的电化学行为。Gomez-Kaifer用循环伏安法研究了系列母体醌式功能化杯[4]衍生物的氧化还原特性,发现该特性对Na^＋、Ag^＋有选择性识别响应。     

Naphthocrown‐Strapped Calix[4]pyrroles: Formation of Self‐Assembled Structures by Ion‐Pair Recognition

A new approach to the construction of self‐assembled structures is reported that is based on ion‐pair recognition. Towards this end, the calix[4]pyrrole naphthocrown‐4 hybrid structures 2 and 3 were prepared. These multitopic receptors contain recognition sites for both anions and cations. On the basis of solution‐phase ¹H NMR spectroscopic analysis and solid‐state single‐crystal X‐ray diffraction structural studies, it was established that receptors 2 and 3 are able to bind specific ion pairs with high selectivity via different binding modes. In the case of CsF and CsCl, the ion‐pair complexes formed from receptors 2 and 3 were found to self‐assemble to produce either linear supramolecular polymeric crystalline solids or nanotube‐like cyclic hexamers depending on the specific choice of ion pairs and crystallization solvents. Proton NMR studies provided evidence for solution‐phase self‐association in organic media.     

Studies on the Novel Calix [4] pyrrole and Its High Selectivity for p‐Nitrophenol

Synthesis of novel neutral molecule receptor calix [4] pyrrole (2) from pyrrole and tropinone has been described and its ability of binding neutral molecules was tested. Spectroscopic titrations indicate that receptor 2 shows the highest selectivity for p‐nitrophenol among m,o,p‐nitrophenols due to the coincidence between the host's binding sites and the guest's geometry.     

Application of a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole/carbon nanotube modified glassy carbon electrode for voltammetric determination of hydrazine in water samples

The electrochemical behaviour of hydrazine at a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole‐triazole/carbon nanotube modified glassy carbon electrode has been studied. The modified electrode shows an excellent electrocatalytic activity for the oxidation of hydrazine and accelerates electron transfer rate. The electrocatalytic current increases linearly with hydrazine concentration in the range 0.5–700.0 μm and the detection limit for hydrazine was 33.0 ± 2.0 nm . The diffusion coefficient (D = 2.5 ± 0.1 × 10^?5 cm² s^?1) and kinetic parameters such as the electron transfer coefficient, (α = 0.52) and the heterogeneous rate constant (k′ = 5.5 ± 0.1 × 10^?3 cm s^?1) for hydrazine were determined using electrochemical approaches. Finally, the method was employed for the determination of hydrazine in water samples. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Electrochemical oxidation determination and voltammetric behaviour of 4-nitrophenol based on Cu2O nanoparticles modified glassy carbon electrode

Cu₂O nanoparticles (nano-Cu₂O) modified glassy carbon electrode (GCE) was fabricated and used to investigate the electrochemical behaviour of 4-nitrophenol (4-NP) by cyclic voltammetry (CV), chronoamperometry (CA), chronocoulometry (CC) and differential pulse voltammetry (DPV). Compared with GCE, a remarkable increase in oxidation peak current was observed. It indicates that nano-Cu₂O exhibits remarkable enhancement effect on the electrochemical oxidation of 4-NP. Under the optimised experimental conditions, the oxidation peak currents were propotional to 4-NP concentration in the range from 1.0?×?10^?6 to 4.0?×?10^?4?mol?L^?1 with a detection limit of 5.0?×?10^?7?mol?L^?1 (S/N?=?3). The fabricated electrode presented good repeatability, stability and anti-interference. Finally, the proposed method was applied to determine 4-NP in water samples. The recoveries for these samples were from 94.60% to 105.5%.     

Synthesis and Properties of Functionalized Schiff Bases of 5α,10α-Di（4-hydroxylphenyl）calix[4]pyrrole and 5α,15β-Di（4-hydroxylphenyl）calix｜4] pyrrole

A series of calix[4]pyrrole meso-substituted Schiff bases was synthesized with 5α,10α-di（4- hydroxylphenyl）calix[4]pyrrole or 5α,15β-di（4-hydroxylphenyl）calix[4]pyrrole as starting materials. The synthetic routes included alkylation with methyl a-chlroroaceate, ammonolysis with alkylene diamine, and condensation with salieylladehyde or 2-hydroxynaphthaldehyde. The crystal structures of the new calix[4]pyrroles and their Schiff bases were determined by X-ray diffraction. The coordination properties of the representative ealix[4]pyrrole Sehiff bases to transition metal ions were also investigated by UV-Vis spectra.     

Novel Synthesis and Characterization of 1,3‐Bis(2‐dihydrothiazolyl)thiaalkoxy‐p‐tert‐butylcalix[4]arenes

A novel series of 1,3‐bis(2‐dihydrothiazolyl)thiaalkoxy‐p‐tert‐butylcalix[4]arenes generated by the reaction between 4,5‐dihydrothiazole‐2‐thiol and the different dibromide calix[4]aryl groups have been synthesized and structurally characterized by IR, ¹H NMR, ¹³C NMR, and MS. From their analytical data, it was found that compounds 8, 9, and 10 had cone conformations, whereas compound 11 existed as a mixture conformation. To verify the structure of the synthetic compounds, a single‐crystal X‐ray structure of compound 8 was obtained.     

Calix[4]quinones III: The Synthesis of p‐Hydroxycalix[4]arenes by Wolff‐Kishner Reduction

The Wolff‐Kishner reduction of the half‐protected ketal calix[4]monoquinone 3 and its basic hydrolysis product 4 produced a partially reducing product 5 . When the same reduction conditions were applied to the calix[4]quinone benzoates 1 and 2 , the corresponding title compounds, p‐hydroxycalix[4]arenes ( 6 and 7 ), were afforded in one step.     

Anodic Stripping Voltammetric Determination of Lead（Ⅱ） Using Glassy Carbon Electrode Modified with Novel Calix[4] arene

A new glassy carbon electrode modified with novel calix[4]‐arene derivative was prepared and then applied to the selective recognition of lead ion in aqueous media by cyclic and square wave voltammetry. A new anodic stripping peak at ? 0.92 V (vs. Ag/Ag⁺) in square wave voltammogram can be obtained by scanning the potential from ? 1.5 to ? 0.6 V, of which the peak current is proportional to the concentration of Pb²⁺. The modified electrode in 0.1 mol/L HNO₃ solution showed a linear voltammetric response in the range of 2.0 × 10–⁸–1.0 × 10–⁶ mol/L and a detection limit of 6.1 × 10–⁹ mol/L. In the modified glassy carbon electrode no significant interference occurred from alkali, alkaline and transition metal ions except Hg²⁺, Ag⁺ and Cu²⁺ ions, which can be eliminated by the addition of KSCN. The proposed method was successfully applied to determine lead in aqueous samples.