Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Synthesis and nonlinear optical properties of hyperbranched polytriazole containing second‐order nonlinear optical chromophore

The hyperbranched polytriazole (hb‐PTA) containing second‐order nonlinear optical chromophore was synthesized through “A₂ + B₃” approach based on “click reaction.” Its corresponding linear analogue (l‐PTA) was prepared for comparison. The hb‐PTA has better solubility in common organic solvents than the l‐PTA. Both the polymers exhibit good thermal stability with 5% weight loss temperatures over 260 °C. The poled film of hb‐PTA exhibits much higher second‐harmonic coefficient (96.8 pm/V) than that of l‐PTA (23.5 pm/V). The three‐dimensional spatial isolation effect resulting from the highly branched structure and the crosslinking of the terminal acetylene groups at moderate temperature play important roles in the enhancement of optical nonlinearity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1140–1148, 2008     

Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Thermoreversible nonlinear diels‐alder polymerization of furan/plant oil monomers

Novel trifunctional monomers based on renewable resources were prepared and subsequently polymerized via the Diels‐Alder (DA) polycondensation between furan and maleimide complementary moieties. Three basic approaches were considered for these nonlinear DA polycondensations, namely the use of (i) a bisfuran monomer in combination with a trismaleimide (A₂ + B₃ system) and (ii) a trisfuran monomer in conjunction with a bismaleimide (A₃ + B₂ system) leading to branched or crosslinked materials, and (iii) the use of monomers incorporating both furan and maleimide end groups (A₂B or AB₂ systems), which lead to hyperbranched structures. The application of the retro‐DA reaction to the ensuing polymers confirmed their thermoreversible character. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Functional,hyperbranched polyesters via baylis–hillman polymerization

Hyperbranched polyesters are among the most common hyperbranched polymers. One of the interesting features of hyperbranched polyesters is that they contain unreacted hydroxyl and carboxylic acid groups at the linear and terminal structural units, which can be postmodified to adjust thermal, solubility, or mechanical properties, or to prepare core–shell type architectures. This article reports on the synthesis of a novel class of hyperbranched polyesters via an A₂ + B₃ type Baylis–Hillman polymerization of 2,6‐pyridinedicarboxaldehyde and trimethylolpropane triacrylate. Baylis–Hillman polymerization generates highly functional polyesters that contain not only unreacted aldehyde and/or acrylate groups at the linear and terminal structural units but also chemically orthogonal vinyl and hydroxyl groups along the polymer backbone. Using 3‐hydroxyquinuclidine as the catalyst, hyperbranched polymers with number‐average molecular weights up to 7500 g/mol and degrees of branching up to 0.81 were obtained. To demonstrate the versatility of these hyperbranched polyesters to act as platforms for further derivatization, the orthogonal postpolymerization modification of the hydroxyl, vinyl, and pyridine functional moieties with phenyl isocyanate, methyl‐3‐mercaptopropionate, and methyl iodide is presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Synthesis and nonlinear optical properties of methacrylate polymers based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophore

Methacrylate polymers containing different molar contents of nonlinear optical (NLO) active molecular segments based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophores were synthesized, and their phase behavior and second‐order NLO properties were investigated. Polymers containing 6–17 mol % chromophore segments allowed the preparation of amorphous and optically clear thin films. Some mesomorphic structuration was exhibited by a polymer with 33 mol % chromophoric units. However, this feature did not prevent the possibility of investigating the NLO properties. Nonlinear resonance‐enhanced d₃₃ coefficients were determined by second harmonic generation experiments on spin‐coated, corona‐poled thin films at λ = 1064 nm. Values ranging from 40 to 60 pm/V were measured with increasing chromophore molar contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1841–1847, 2003     

Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Facile synthesis and electro‐optic activities of new polycarbonates containing tricyanofuran‐based nonlinear optical chromophores

Two series of novel electro‐optic (EO) polycarbonates containing two different kinds of nonlinear optical (NLO) chromophores with tricyanofurane (TCF) electron acceptor have been successfully prepared through the facile polycondensation between diol NLO chromophore and bisphenol A bis(chloroformate). These new polycarbonates which were characterized by ¹H‐NMR and Fourier transform infrared exhibited good solubility in common polar organic solvents. They also showed glass transition temperatures (T_g) in the range of 124–156 °C. The morphology studies indicated that these polycarbonates had good film quality before and after corona poling. The EO coefficients (r₃₃) of two polycarbonates films were up to 45 pm/V (PC‐TCFC‐2) and 75 pm/V (PC‐DFTC‐3) at the wavelength of 1310 nm. Moreover, good temporal stability of the poling‐induced dipole alignment was also achieved, and the resulting poled films of PC‐TCFC‐2 and PC‐DFTC‐3 could retain 90 and 80% of the initial EO activities at 85 °C for more than 500 h, respectively. Both EO activity and temporal stability results were better than the guest–host EO polymers containing the same concentration chromophores, which indicated that such kind of polycarbonates could effectively suppress the intermolecular electrostatic interaction and translate microscopic molecular hyperpolarizability into macroscopic EO activity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2841–2849.     

Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003     

Photoactive liquid crystalline polymers: A comprehensive study of linear and hyperbranched polymers synthesized by A2B2, A2B3, A3B2, and A3B3 approaches

A series of linear and hyperbranched polyester epoxies, with varied structural parameters such as kinked structure and different dendritic architectures, were synthesized by A₂ + B₂, A₂ + B₃, A₃ + B₂, and A₃ + B₃ approaches. The structures of synthesized monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopic techniques. The effect of varied structural parameters on phase behavior and photoresponsive properties was investigated by using differential scanning calorimeter, thermal optical polarized microscope, UV–visible spectroscopy, photoviscosity, and refractive index studies. The transition temperatures of hyperbranched polymers were higher than that of the corresponding linear analogues. All the polymers showed nematic phase (nematic droplets) over a broad temperature range. The effect of kinked structural unit on photoresponsive property is less in both linear and hyperbranched architectures. Although the effect of architectural nature is highly considerable within the hyperbranched architectures, the polymer (HPE–33) synthesized by A₃ + B₃ approach showed highest rate of photocrosslinking, followed by HPE–I 32; HPE–T 32, and HPE–23, which were synthesized by A₃ + B₂ and A₂ + B₃ approaches, respectively. The findings in photoresponsive properties were further supported by molecular modeling studies. Substantial variation of refractive index (0.015–0.024) indicates that these polymers could be used for optical recording. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of hyperbranched polyfluorenes containing triarylpyrazoline cores towards efficient blue light‐emitting diodes

New series of hyperbranched polyfluorenes containing triarylpyrazoline cores, PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , have been synthesized according to the “A₂ + A′₂ + B₃” Suzuki coupling method. The structures and property of the monomers and conjugated polymers were characterized by elemental analysis, gel permeation chromatography, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, and UV–visible absorption, ¹H NMR, ¹³C NMR, and photoluminescence spectroscopies. All these polymers exhibited good solubility in common organic solvents and good thermal stability. The long‐wavelength emission of polyfluorenes had been effectively reduced in these hyperbranched polymers. Standard polymer light emitting devices (PLEDs) from PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , with the configuration of ITO/PEDOT/polymer/TPBI/Alq₃/Mg:Ag, exhibited good electroluminescence (EL) properties The PLED based on PFNZ10 emitted pure blue light with a low turn‐on voltage of 5.3 V and a high EL efficiency of about 1.93%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5296–5307, 2007     

The preparation of hyperbranched aromatic and aliphatic polyether epoxies by chloride‐catalyzed proton transfer polymerization from ABn and A2 + B3 monomers

Hyperbranched polymers consisting of aromatic or aliphatic polyether cores and epoxide chain‐end peripheries were prepared by proton transfer polymerization. AB₂ diepoxyphenol monomer 1 proved to be well suited for the preparation of hyperbranched aromatic polymer 2 by this proton transfer polymerization. The use of chloride‐ion catalysis, rather than conventional base catalysis, for the preparation of polymers from diepoxyphenol 1 offered a unique method to control the ultimate molecular weight of the polymer product through variations of the initial concentration of monomer 1 in tetrahydrofuran. An alternative route to hyperbranched polyether epoxies made use of commercially available or easily prepared aliphatic monomers of the types AB₂, AB₃, and A₂ + B₃. Although these aliphatic polymerizations can be initiated with a base, chloride‐ion catalysis proved most effective for controlling the polymerization. The hyperbranched epoxies were characterized by NMR spectroscopy, gel permeation chromatography, and multi‐angle laser light scattering. Chemical modification of the polymers after polymerization was carried out via nucleophilic addition on the epoxide groups or derivatization of the hydroxy substituents within the hyperbranched polymer structure. Spectroscopic measurements suggested that some such ring‐opened materials may adopt reverse unimolecular micellar structures in appropriate solution environments. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4850–4869, 2000     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011