Exchange interactions in rare-earth iron garnets

Exchange parameters previously reported for YbIG, ErIG and EuIG are compared. One of the three possible sets of parameters found for ErIG is shown to agree fairly well with the EuIG parameters and can also be fitted using an exchange potential. Tentative exchange potential parameters associated with the two types of superexchange pathways which couple the rare-earth ion to neighboring iron ions are obtained. A new method for calculating the YbIG exchange parameters is described and the parameters are compared with those reported previously.     

光纤布拉格光栅中的隙孤子存在条件

提出光纤布拉格光栅中产生隙孤子的条件和参量制约关系。利用非线性耦合模式方程建立光纤布拉格光栅中孤子的传播方程,通过扰动方法建立了参量的微分方程,计算得到参量近似解。以周期非线性光学介质中隙孤子存在的条件为依据,数学计算分析得到两组参量关系不等式。最终通过数值计算说明了这些参量之间存在制约关系和物理意义。从而理论上说明了在光纤布拉格光栅中隙孤子存在需要选择适当参量。为光纤布拉格光栅中产生隙孤子的实验和进一步的工程应用提供了理论基础。     

Calculating Hamiltonian parameters for Yb~(3+) in a low-symmetry lattice site,and fitting the structure and levels of Yb~(3+) :TaO_4 (= Gd,Y,and Sc)

An iterative method is used to find the values of the Hamiltonian parameters for Yb3+ in a given low-symmetry crystalline site.Samples of Yb3+:RETaO4(RE = Gd,Y,and Sc) were prepared and their structures were determined.Based on the obtained structural data,their orbital-spin parameters and crystal field parameters were fitted by the superposition model(SM).Using the crystal field parameters obtained by the SM fitting as the initial parameters,the Hamiltonian parameters were fitted iteratively.The calculated and experimental energy levels for Yb3+:RETaO4 are consistent,and the maximal mean-root-square deviation is only 2.84 cm-1,indicating that the method is effective to determine the Hamiltonian parameters of Yb3+ in low-symmetry crystalline sites.     

Local Information as an Essential Factor for Quantum Entanglement

Quantum entanglement is not only a fundamental concept in quantum mechanics but also a special resource for many important quantum information processing tasks. An intuitive way to understand quantum entanglement is to analyze its geometric parameters which include local parameters and correlation parameters. The correlation parameters have been extensively studied while the role of local parameters have not been drawn attention. In this paper, we investigate the question how local parameters of a two-qubit system affect quantum entanglement in both quantitative and qualitative perspective. Firstly, we find that the concurrence, a measure of quantum entanglement, of a general two-qubit state is bounded by the norms of local vectors and correlations matrix. Then, we derive a sufficient condition for a two-qubit being separable in perspective of local parameters. Finally, we find that different local parameters could make a state with fixed correlation matrix separable, entangled or even more qualitatively entangled than the one with vanished local parameters.     

钙钛矿铁电体原子势参数的灵敏度分析及优化

原子相互作用势参数在分子动力学模拟中非常关键.本文针对钙钛矿铁电体原子势参数较多的特点,提出了一种高效的优化参数的方法:首先应用灵敏度分析方法从众多参数中找到对结构和性能影响最为明显的主要参数,忽略影响很小的次要参数,大大降低优化问题的维数;然后应用遗传算法对主要参数进行优化.优化结果表明,用本文得到的势参数模拟BaTiO₃ 和SrTiO₃,其结构和物理性能更接近实验值.     

Joint modeling and maximum-likelihood estimation of pitch and linear prediction coefficient parameters.

The well-known speech production model is considered, where the speech signal is modeled as the output of an all-pole filter driven either by some white noise sequence (unvoiced speech) or by the sum of a periodic excitation and a noise sequence (voiced speech). Approximate maximum-likelihood (ML) estimation algorithms for the unvoiced case are well known. The ML estimator of the parameters is obtained for the voiced speech model. These parameters consist of the parameters of the periodic excitation (pitch parameters) and the parameters of the filter [linear prediction coefficient (LPC) parameters]. The results of the application of the algorithm on simulated and on real speech data are presented.     

高功率固体激光器光学元件面形评价参数

结合高功率固体激光器的发展,说明了高功率光学元件面形评价参数的产生原因、发展过程及其内在因素。介绍了面形评价参数的现状,并通过讨论各面形评价参数之间的内在联系,说明了现行评价参数的综合性能及发展趋势。     

关联复杂网络建模及辨识研究

运用异质耦合拆分方法和驱动-响应模型,提出关联复杂网络节点参数和拓扑结构的辨识方法.首先,研究异质关联复杂网络建模方法,进而依据网络耦合性质不同,拆分构造了两类异质关联复杂网络.然后运用驱动-响应模型、LaSalle不变原理和Gram矩阵,设计节点系统参数和拓扑参数的自适应辨识观测器.所提的观测器能在线获取网络的节点参数、不同耦合性质的拓扑参数.最后,通过数值仿真验证所提方法的有效性.     

Monaural and binaural parameters of Rudolfinum concert halls in Prague

Objective parameters for the evaluation of the Rudolfinum concert hall in Prague, Czech Republic are the focus of the present article. The measured results for Reverberation parameters, Energy parameters, Intelligibility parameters, and Spatial parameters of the building’s two halls are presented and discussed including a comparison with recommended values or theory, as well as several unique architectural and acoustical qualities of the halls. The early lateral energy fraction parameter is measured by the intensity probe method discussed in the supplement. The performance is verified by tests in anechoic and reverberant rooms.     

HL-1装置供电及控制系统调试

本文在介绍供电系统及其主要技术参数和调试概况的基础上,着重分析了电源参数与等离子体参数间的关系,叙述了获得平衡稳定等离子体的调试过程,并对供电回路的退耦方法进行了初步探讨。     

Experimental verification of the electromagnetic spectral interference law using a modified version of the Young's interferometer

We present a method to verify the electromagnetic spectral interference law experimentally, which connects the combined two-beam usual Stokes parameters with the corresponding single beam usual Stokes parameters. Using polarizers and phase retarders in a modified version of the Young's interferometer, the usual Stokes parameters and the generalized Stokes parameters are determined for a laser beam. The experimentally determined single point (usual) Stokes parameters at an axial point in the observation plane for the combined beam are compared with their theoretically expected values obtained by putting the experimental data in the electromagnetic spectral interference law. A fairly good agreement is found between the two values. Not only does the proposed method provides a comparison between the two kinds of Stokes parameters but also validates the role of the generalized Stokes parameters as modulation parameters for the usual Stokes parameters.     

Inverse acoustical characterization of natural jute sound absorbing material by the particle swarm optimization method

For modeling of jute as acoustic material, knowledge of its non-acoustical parameters like porosity, tortuosity, air flow resistivity, thermal and viscous characteristic lengths is a prime requisite. Measurement of these non-acoustical parameters is not straightforward and involves a dedicated measurement setup. So in order to overcome this issue, the inverse acoustical characterization can be used. In this paper, the particle swarm optimization method (PSO) is used as an optimization method. This method estimates the non-acoustical parameters of jute material in felt form by minimizing the error between experimental and theoretical sound absorption data. In this work, the impedance prediction models for fibrous materials like Johnson–Champoux–Allard model with rigid and limp frame and Garai–Pompoli model is used for sound absorption coefficient calculation by the transfer matrix method along with the PSO. The inverse estimated non-acoustical parameters for jute material are then compared with estimated and experimentally measured parameters for jute felts. Using these inversely predicted parameters, sound absorption of multilayer sound absorbers is also studied.     

Simulation of a Radio-Frequency Photogun for the Generation of Ultrashort Beams

A radio-frequency photogun for the generation of ultrashort electron beams to be used in fast electron diffractoscopy, wakefield acceleration experiments, and the design of accelerating structures of the millimeter range is modeled. The beam parameters at the photogun output needed for each type of experiment are determined. The general outline of the photogun is given, its electrodynamic parameters are calculated, and the accelerating field distribution is obtained. The particle dynamics is analyzed in the context of the required output beam parameters. The optimal initial beam characteristics and field amplitudes are chosen. A conclusion is made regarding the obtained beam parameters.     

基于Powell算法的亚像元配准方法

基于Powell优化算法和图像的金字塔分解,提出了一个新的亚像元运动参数估计方法.用参考图像和待配准图像构造的非线性最小二乘公式作为Powell算法的目标函数,并且以运动参数作为变量.由细到粗的多分辨率分解为准确的亚像元参数估计提供了基础.数值实验结果表明,该算法可以用于准确的稳健的亚像元参数估计,其不足之处在于运行时间比较长.     

高度自动化获取书籍扫描图像畸变参数的实验

分析了利用打印直线获取书籍扫描图像畸变校正所用参数时影响精度的一些因素,并提出了相应的措施。利用Visual C++6.0编写了自动获取畸变参数的程序。对不同的垂直扫描线用不同的灰度阈值进行图像分割,得到打印直线的扫描图像上各点坐标的测量值。为提高计算速度,对畸变参数进行了估计。在估计值附近,利用网格搜索法,计算畸变参数取不同值时各点坐标的理论值。根据最小二乘法原理,当各点坐标的理论值与测量值之差的平方和最小时,所对应的一组畸变参数即为最佳解。将打印有直线的纸张裹在已知直径的圆柱体上,在不同条件下扫描图像,用所编程序自动计算畸变参数,证明了这种方法的可行性。     

A self-consistent analysis of semiconductor laser rate equations for system simulation purpose

A procedure for extraction of the rate-equation parameters of semiconductor laser diodes is presented. Using small signal measurements, we have formulated a complete set of equations, which can be resolved analytically to obtain a solution for a combination of parameters that constitute a modified rate-equation model and is presented here for the first time. The proposed method does not necessitate at, or below threshold measurements, which require high sensitivity from the measuring equipment. Furthermore, without the need for any optimization, the solution to the rate equations is completely self-consistent since the parameters are linked together through functional relationships. With this new method, the determination of all the necessary rate-equation parameters to carry out large signal simulation is exclusive of the measurements for signal chirp, and as such computation of the chirp parameter is not included here. Comparison between large signal measurements and simulations from the computed parameters show very good agreement for a range of above threshold bias currents.     

在有限温度下运用弱测量保护量子纠缠

根据单量子比特的映射, 提出一个在有限温度下运用弱测量保护两量子比特纠缠的方案. 在两个可通过局域幺正变化实现的等价的初始纠缠进入广义振幅阻尼信道前后, 对其分别进行弱测量, 并对四个弱测量的参数做全面的优化, 获取最大共生纠缠C_r 和弱测量参数m, n的解析表达式, 然后再进一步研究弱测量参数与信道参数的关系. 发现这种基于弱测量的纠缠保护方法在某些情况下可以有效地提高纠缠, 甚至可以避免纠缠的突然死亡. 当信道参数r一定时, 对不同的参数p,初始态|ψ>纠缠达到最大值时对应的弱测量参数m的取值一样, 共生纠缠关于p=0.5对称, 而初始态|φ>对应的参数m的取值不同; 在参数p一定、参数r不同、初始态|ψ>或|φ>的情况下, 当纠缠度取最大值时, 弱测量参数m的取值不变, 且随着r的增加, 纠缠度减少. 通过对信道参数的分析, 发现可以选择合适的信道参数和初始态来获得较大的纠缠.     

Nonlinear adaptive synchronization rule for identification of a large amount of parameters in dynamical models

The existing adaptive synchronization technique based on the stability theory and invariance principle of dynamical systems, though theoretically proved to be valid for parameters identification in specific models, is always showing slow convergence rate and even failed in practice when the number of parameters becomes large. Here, for parameters update, a novel nonlinear adaptive rule is proposed to accelerate the rate. Its feasibility is validated by analytical arguments as well as by specific parameters identification in the Lotka-Volterra model with multiple species. Two adjustable factors in this rule influence the identification accuracy, which means that a proper choice of these factors leads to an optimal performance of this rule. In addition, a feasible method for avoiding the occurrence of the approximate linear dependence among terms with parameters on the synchronized manifold is also proposed.     

Design Guideline of Hollow-Core Fibres with Cobweb Cladding Structure

By using a plane wave expansion method, some important cobweb cladding structure are analysed. Taking a dielectric parameters of designing the hollow-core fibre with material PMMA, for example, the tolerance of the parameters is discussed. The results show that the parameters of the structure possess oneself of a regularity and limit, and have a larger tolerance for the structural parameters in fabrication.     

非线性晶体三波互作用允许参量的修正计算

采用传统级数展开方法计算晶体非线性三波互作用的允许参量,利用定义通过计算机数值模拟进行了精确计算,修正了传统计算结果,发现晶体在产生二次谐波时,在某些角度存在很宽的允许波长峰,超过传统文献值约几十倍。研究表明,在产生二次谐波时,10mm长的晶体在某些波段获得100mm以上的允许倍频带宽是可能的,并提出了移动这些宽带的方法。