Periodate oxidation analysis of carbohydrates: Part IV. Simultaneous determination of aldehydes in di-aldehyde fragments as 2,4-dinitrophenylhydrazones by thin-layer or liquid chromatography

A method for the simultaneous determination of aldehydes in dialdehyde fragments, obtained from carbohydrate samples by periodate oxidation, is proposed. Reaction mixtures obtained from the periodate oxidation of carbohydrate samples are deionized by resins, and evaporated to dryness. The syrupy residues are treated with 2,4-dinitrophenylhydrazine hydrochloride in 1.2-dimethoxyethane at 25°C for 3 h. The resultant mixtures of hydrazones are separated by t.l.c. or l.c., and individual hydrazones are determined by spectrophotometric measurement. Reliable analyses of carbohydrate linkages are possible with 50–250-μg samples.     

Spectrophotometr1c determination of ruthenium with 1-naphthylamine-3,5,7-trisulfonic acid

An investigation has been made to determine the applicability of the osmate-naphthylamine reaction to the ruthenate system. It was found that under proper conditions. ruthenium (RuVI) reacts with 1-naphthylamine-3,5.7-trisulfonic acid to form a water-soluble red complex ion with a maximum absorbance at 530 mμ. The complex was found to be stable and to obey Beer's law over a concetration range of 0.5 to 14 p.p.m. The effects of PH, reagent concentration, and diverse ions were studied. The nature of the complex in solution was investigated, and a, standard procedure for analysis recommended. A procedure for the removal of ruthenium from all interfering materials was developed based on well known distillation techniques.A rapid, sensitive, reproducible and accurate method for the spectrophotometric determination of ruthenium has been developed.     

Periodate oxidation analysis of carbohydrates: Part IX. Evaluation of the use of pyridine as reaction solvent for oxidation of water-insoluble carbohydrate materials

Oxidation of methyl glycopyranosides with periodic acid in pyridine was studied by analysis of the reaction products by the dithioacetal method. Both C₂—C₃ and C₃—C₄ bonds were cleaved yielding three types of dialdehydes;secondary attack of these dialdehydes by periodic acid did not occur. Oxidation in aqueous pyridine proceeded in normal Malapradian fashion, but more slowly than for oxidation in water. Molar proportions of aldehydes were theoretical, when methyl glycosides were oxidized with periodic acid in a 1:1 ($\text{v}\text{v}$) mixture of pyridine and water. The structures of carbohydrate moieties in a few saponins and glycolipids were confirmed by analysis of the oxidation products obtained under similar conditions.     

Viscometric determination of dialdehyde content in periodate oxycellulose. Part I. Methodology

Periodate oxycellulose was subjected to alkaline hydrolysis at room temperature in both homogeneous (cupriethylenediamine) and heterogeneous (sodium hydroxide) medium, and the degradation kinetics was followed for nearly three months. By comparing the obtained results with the degradation kinetics of both hydrocellulose and periodate oxycellulose reduced with tert-butylamine borane, it was demonstrated that the -alkoxy fragmentation of oxidised sites is a very fast reaction, which reaches completeness during the preparation of samples for viscometric analyses. The subsequent degradation is due to other mechanisms, such as autoxidation and peeling. A comparison between the degrees of polymerisation of periodate oxycellulose before and after its reduction allows the quantitative determination of dialdehyde groups, without the interference of reducing end groups. Although this technique might not be valid for other kinds of oxycellulose, it supplies a simple and fast method for the analysis of mildly oxidised cellulose.     

Periodate oxidation analysis of carbohydrates: Part 12. Rapid Determination of Aldehydes in the Oxidation Products of Oligoglycosides by the Dithioacetal Method

A rapid and convenient analysis for glycosidic linkages in oligoglycosides was developed by improving the ditbioacetal method. A sample (0.1–1 μmol) was oxidized with an aqueous or aqueous methanolic 0.05 M solution of sodium metaperiodate for 3 h at 50°C. An equivalent amount of silver nitrate was added and the mixture was evaporated to dryness. The residue was treated with a 2:1 (v/v) mixture of ethanethiol and trifluoroacetic acid for 10 min at 25°C, and subsequently trimethylsilylated with hexamethyldisilazane and trimethylchlorosilane for 30 min at 50°C. Gas chromatography of the product allowed the simultaneous determination of the conjugated aldehydes in the oxidation product with high reproducibility. The glycosidic linkages in various oligoglycosides were examined by this procedure.     

Viscometric determination of dialdehyde content in periodate oxycellulose Part II. Topochemistry of oxidation

The kinetics of periodate oxidation of cellulose was followed through the alkaline degradation of the dialdehyde groups by measuring the viscometric degree of polymerisation and the alkali consumption. The obtained results show that a fast but limited attack of periodate occurs in the amorphous region of cellulose, causing the decrease of degree of polymerisation to its levelling-off value. The alkali consumption indicates at least two further slower reactions, that lead to the asymptotic complete oxidation of cellulose units. With the pseudo first-order approximation, the oxidation half-time of these three reactions can be calculated, corresponding to 1.2, 20 and 854 h respectively. In spite of the high oxidation of the analysed samples (up to about 46%), the residue after alkaline degradation shows a relatively high value of degree of polymerisation rather than the narrow molecular weight distribution of oligomers expected from a random oxidation, thus indicating that periodate oxidises cellulose in isolated domains. The sequence of analyses over the same sample utilised in this work (titrimetry, weight loss and viscometry), performed at room temperature in mild conditions, makes it possible to investigate the topochemistry of oxidation of paper and textiles of historic and artistic value with microdistructive techniques on a single, very small fragment of material.     

Spectrophotometr1c determination of palladium : Bismuthiol i as an analytical reagent

The reagent, bismuthiol l, has been successfully utilized for the spectrophotometric determination of palladium. The colour reaction is instantaneous and the system is stable for at least 24 hours in the pH range 6 to 10 but shows no sharp peak of maximum absorption. The system obeys Beer's law at a palladium concentration of 0.8 μg to 8.0 μg per ml at any wavelength between 400 mμ and and 410 mμ giving a sensitivity of 0.08 μg of palladium per cm² (practical); 0.01 μg of palladium per cm² (sandell). Ethyl alcohol stabilizes the system against any deviation due to appearance of turbidity. A large excess of the reagent and almost all thc cations and anions, except platinum, gold, copper, chromium, iron, mercury, silver, thallium, uranium, vanadate and cyanide, do not interfere. By applying job's method of continuous variation it was found that the complex contains thc reactants in 1 : 1 ratio and that the average value of the dissociation constant of the complex is 3.2$\text{.}\text{?}$ 10^-5 at 25°.     

Anion-exchange initiation of reactions: Detection and spectrophotometric determination of aliphatic amines with 2,4-dinitrophenylhydrazine

The role of anion-exchange resin beads in the initiation of reactions of tertiary amines with 2,4-dinitrophenylhydrazine has been explored. This reagent has been used for the selective detection and determination of aliphatic amines. Radiochemical studies have been performed to show that the coloured species is adsorbed but not exchanged on ion-exchange beads. A model for the interaction is proposed.     

Electroanalysis and determination of acetaldehyde in fuel ethanol using the reaction with 2,4-dinitrophenylhydrazine

The voltammetric reduction of acetaldehyde was studied in 0.1 M LiOH: LiCl (60: 40 v/v). Well-defined waves can be seen at −1.77 and −1.60 V with the use of hanging mercury and glassy carbon electrodes. Acetaldehyde was shown to react at room temperature with the 2,4-dinitrophenylhydrazine and the product exhibited a differential pulse voltammetric peak at −0.90 V, which was well separated from the peaks of the derivative. This allowed the indirect determination of acetaldehyde in the presence of 0.1 M ethanol/tetrabutylammonium perchlorate after 10 min of reaction. Calibration graphs were obtained for 1.00 × 10⁻⁶−1.00 × 10⁻⁴ M of acetaldehyde. The detection limit is 8.14 × 10⁻⁷ M. The method has been applied satisfactorily to the determination of total aldehyde in fuel ethanol samples without any pretreatment. The text was submitted by the authors in English.     

The reaction of carbonyl groups in polyethylene films—I: The reaction with 2,4-dinitrophenylhydrazine

A method is detailed for the study of the reaction of 2,4-dinitrophenylhydrazine with polyethylene films containing carbonyl groups. The difference between films u.v.-irradiated in air and those made with a ketone-containing copolymer is studied. There is also a study of the effects of thickness of film. Progress of reaction was monitored by u.v.-spectroscopy. The u.v. absorbance increased with time of immersion in the 2,4-dinitrophenylhydrazine solution, and with increasing thickness of film. An explanation is advanced for the difference between the two types of film: it is related to differences between the distribution of carbonyl groups through the films. Most of the carbonyl groups in the photo-oxidised films made from polyethylene were on the surface. There is evidence that 2,4-dinitrophenylhydrazine can penetrate and react throughout the films.     

Spectrophotometr1c determination of cadmium with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

The reaction between cadmium and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl DMPAP) in aqueous alcohol media at pH 8.8-10.7 results in an intense violet colour which is stable for at least 8 hr. The composition is 2:1 reagent:metal and the formation constant (5.29 +/- 0.01) x 10(18). Beer's law is obeyed up to 1.34 ppm of cadmium at 550 nm. The optimal concentration range (Ringbom) is between 0.16 and 0.72 ppm. The apparent molar absorptivity at 550 nm is (1.20 +/- 0.01) x 10(5) l.mole(-1). cm(-1), making the sensitivity one of the highest known. The interference due to copper(III), iron(III), cobalt(II), nickel(II), gold(III), zinc(II) and manganese(II) can be suppressed.     

Rapid and highly sensitive determination of low-molecular-weight carbonyl compounds in drinking water and natural water by preconcentration HPLC with 2,4-dinitrophenylhydrazine.

The aim of this research was to develop a simple procedure for a highly sensitive determination of low-molecular-weight (LMW) carbonyl compounds in drinking water and natural water. We employed a preconcentration HPLC system with 2,4-dinitrophenylhydrazine (DNPH) for the determination of LMW carbonyl compounds. A C-18 reverse-phase preconcentration column was used instead of a sample loop at the sample injection valve. A 0.1 - 5.0 mL portion of the derivatized sample solution was injected with a gas-tight syringe, and a 15% acetonitrile aqueous solution was pushed through the preconcentration column to remove the unreacted excess DNPH, which caused serious interference in the determination of formaldehyde. The detection limits were 1 - 3 nM with a relative standard deviation of 2 - 5% for 20 nM standard solutions (n = 5). The calibration curves were essentially unaffected by coexisting sea salts. Applications to commercial mineral water, tap water, river water, pond water and seawater are presented.     

Molecular fragmentations: Part I. Structures and energies of molecular fragments derived from formic acid

Molecular geometries and heats of formation are calculated, using MINDO/3, for the following mass-spectral fragment pairs derived from formic acid: X(²A')(HCOOH)⁺; (HCOO)⁺ + H^xxx; (HCO)⁺ + OH; HCO + (OH)⁺; (CO)⁺ + H₂O; (CO₂)⁺ + H₂. The activation energy for the reaction (HCOOH)⁺ → (HCOO)⁺ + H^xxx is 75 kJ mol^?1. A correlation is made of the symmetry classes of the electronic states of (HCOOH)⁺, accessible by single electron excitation, and those of the mass-spectral fragments: it is shown that, despite their closely similar appearance potentials, the ions (HCOO)⁺ and (HCO)⁺ arise from different states of (HCOOH)⁺. The structure of (HCOOH)²⁺ is also reported.     

Disturbance of the determination of aldehydes and ketones: Structural elucidation of degradation products derived from the reaction of 2,4-dinitrophenylhydrazine (DNPH) with ozone

None of the reaction products of ozone and DNPH immobilized on solid phase support have been identified yet. However, they can interfere with the determination of carbonyl compounds in ozone containing air when analysis is performed by sampling and derivatization with DNPH coated silica cartridges. To elucidate the structure of these compounds, DNPH silica cartridges were treated with synthetic air containing defined concentrations of ozone and eluted with acetonitrile. The products were characterized by HPLC-UV/Vis and nuclear magnetic resonance (NMR) spectroscopy. Three of the degradation products were identified as 2,4-dinitrophenol, 2,4-dinitroaniline and 1,3-dinitrobenzene. The identification was confirmed by comparison with commercially available standard compounds. The other elutable products were characterized as substituted aromatic compounds. The formation of all characterized products is consistent with a radical mechanism which has been previously discussed in the literature. Received: 9 September 1998 / Revised: 9 February 1999 / Accepted: 11 February 1999     

Merging zones in flow injection analysis : Part 6. determination of calcium in natural waters, soil and plant materials with glyoxal bis(2-hydroxyanil)

A flow injection procedure is proposed for the spectrophotometric determination of calcium in natural waters, soil extracts and plant digests, employing glyoxal bis(2-hydroxyanil) as the colour-forming reagent. The necessary dissociation of this reagent, which is rather slow, proceeds outside the analytical path, and the merging-zones approach is used for reagent addition. Composition of reagents, dissociation time of the colourforming reagent, ethanol content in the carrier streams and interferences are described. In the analysis of plant and soil materials, zone sampling is required for initial sample dilution. The proposed systems are very stable and permit a sampling rate of 180 determinations per hour. Relative standard deviations are less than 1%. The results compare well with those obtained by inductively-coupled argon-plasma atomic emission spectrometry.     

Derivatization of beta-dicarbonyl compound with 2,4-dinitrophenylhydrazine to enhance mass spectrometric detection: application in quantitative analysis of houttuynin in human plasma

Houttuynin (decanoyl acetaldehyde), a beta-dicarbonyl compound, is the major antibacterial constituent in the volatile oil of Houttuynina cordata Thunb. In the present work, detection of houttuynin in human plasma based on the chemical derivatization with 2,4-dinitrophenylhydrazine (DNPH) coupled with liquid chromatography/tandem mass spectrometry was described. The primary reaction products between the beta-dicarbonyl compound and DNPH in aqueous phase were identified as heterocyclic structures, of which the mass spectrometric ionization and fragmentation behavior were characterized with the aid of high-resolution multistage mass spectral analysis. For quantification, houttuynin and internal standard (IS, benzophenone) in plasma were firstly converted to their DNPH derivatives without sample purification, then extracted from human plasma with n-hexane and detected by liquid chromatography tandem mass spectrometry performed in selected reaction monitoring (SRM) mode. This method allowed for a lower limit of quantification (LLOQ) of 1.0 ng/ml using 100-microl plasma. The validation results showed high accuracy (%bias < 2.1) and precision (%CV < 7.2) at broad linear dynamic range (1.0-5000 ng/ml). The simple and quantitative derivatization coupled with tandem mass spectrometric analysis facilitates a sensitive and robust method for the determination of plasma houttuynin in pharmacokinetic studies.