Ethylene polymerization and ethylene/hexene copolymerization by vanadium(III) complexes bearing bidentate phenoxy‐phosphine oxide ligands

A series of novel vanadium(III) complexes bearing bidentate phenoxy‐phosphine oxide [O,P=O] ligands, (2‐R₁‐4‐R₂‐6‐Ph₂P=O‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = tBu, R₂ = H; 2d : R₁ = Ph, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) have been synthesized by adding 1 equiv of the ligand to VCl₃(THF)₃ dropwise in the presence of excess triethylamine. Under the same conditions, the adding of VCl₃(THF)₃ to 2.0 equiv of the ligand afforded vanadium(III) complexes bearing two [O,P=O] ligands ( 3c , 3f ). All the complexes were characterized by FTIR and mass spectra as well as elemental analysis. Structures of complexes 2c and 3c were further confirmed by X‐ray crystallographic analysis. On activation with Et₂AlCl and ethyl trichloroacetate, these complexes displayed high catalytic activities for ethylene polymerization (up to 26.4 kg PE/mmol_V·h·bar) even at high reaction temperature (70 °C) indicative of high thermal stability, and produced high molecular weight polymers with unimodal molecular weight distributions. Additionally, the complexes with optimized structure exhibited high catalytic activities for ethylene/1‐hexene copolymerization. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled in a wide range via the variation of catalyst structure and the reaction parameters such as Al/V molar ratio, comonomer feed concentration, and reaction temperature. The monomer reactivity ratios r_E and r_H were determined according to ¹³C NMR spectra, which indicated these complexes preferred ethylene to 1‐hexene in the copolymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5298–5306     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Ethylene polymerization of the new titanium complexes bearing a phosphine oxide‐bridged bisphenolato ligand

A series of novel titanium(IV) complexes combining a phosphine oxide‐bridged bisphenolato ligand TiCl₂{2,2′‐O?P‐R₃ (4‐R₂‐6‐R₁‐C₆H₂O)₂}(THF) ( 6a : R₁ = tBu, R₂ = H, R₃ = Ph; 6b : R₁ = Ph, R₂ = H, R₃ = Ph; 6c : R₁ = R₂ = tBu, R₃ = Ph; 6d : R₁ = R₂ = cumyl, R₃ = Ph; 6e : R₁ = tBu, R₂ = H, R₃ = PhF₅) were prepared by the reaction of corresponding bisphenolato ligands with TiCl₄ in THF. X‐ray analysis reveals that complex 6a adopts distorted octahedral geometry around the titanium center. These catalysts were performed for ethylene polymerization in the presence of modified methyaluminoxane (MMAO). The effects of reaction parameters on ethylene polymerization behaviors, such as cocatalyst concentration, polymerization temperature, and reaction time were studied in detail. In general, these new complexes exhibited high catalytic activity, good temperature tolerance, and long lifetime for ethylene polymerization. The resulting polymers possess high molecular weight, unimodal distribution, and linear structure. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7062–7073, 2008     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Bis(β‐enaminoketonato) vanadium (III or IV) complexes as catalysts for olefin polymerization

Bis(β‐enaminoketonato) vanadium(III) complexes ( 2a–c ) [O(R₁)C?C(H)_xC(R₂)?NC₆H₅]₂VCl(THF) and the corresponding vanadium(IV) complexes ( 3a–c ) [O(R₁)C?C(H)_xC(R₂)? NC₆H₅]₂VO (R₁ = ? (CH₂)₄? , R₂ = H, x = 0, a ; R₁ = ? C₆H₅, R₂ = H, x = 1, b ; R₁ = ? C₆H₅, R₂ = ? C₆H₅, x = 1, c ) have been synthesized from VCl₃(THF)₃ and VOCl₂(THF)₂, respectively, by treating with 2.0 equivalent β‐enaminoketonato ligands in tetrahydrofuran. Structures of 2b and 3a–c were further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–c and 3a–c exhibited high catalytic activities (up to 23.76 kg of PE/mmol_V h bar), and afforded polymers with unimodal molecular weight distributions at 70 °C indicating the good thermal stability. The catalytic behaviors were influenced not only by the oxidation state of the catalyst precursors but also by the ligand structures. Complexes 2a–c and 3a–c were also effective catalyst precursors for ethylene/1‐hexene copolymerization. The influence of polymerization parameters such as reaction temperature, Al/V molar ratio and hexene feed concentration on the ethylene/hexene copolymerization behaviors have bee also investigated in detail. In addition, the agents such as AlMe₃, AlⁱBu₃, MeMgBr, MgCl₂, and ZnEt₂ were applied to control the molecular weight and molecular weight distribution modal. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3062–3072, 2010     

Ethylene homopolymerizaton and copolymerizaton by vanadium(III) complexes containing tridentate or tetradentate iminopyrrolyl ligands

Iminopyrrolyl vanadium(III) complexes 2a–b bearing tridentate ligands [C₄H₃NCH?NC₆H₄L]VCl₂(THF) [L = 2‐P(C₆H₅)₂ ( 2a ), 2‐SMe ( 2b )] and complexes 2c–d with tetradentate ligands [(C₄H₃NCH?N)₂R]VCl(THF) [R = 1,2‐C₆H₄ ( 2c ), 1,2‐C₂H₄ ( 2d )] have been synthesized in high yields. With diethylaluminium chloride as a cocatalyst, complexes 2a–d were investigated as efficient catalysts for ethylene polymerization under various reaction conditions, and exhibited high catalytic activity and remarkable thermal stability. With these complexes, high molecular weight polymers with unimodal molecular weight distributions were obtained, indicating that the polymerization reaction took place in a single‐site nature. Ethylene/1‐hexene copolymerizations were also investigated in the presence of Et₂AlCl. Both increasing ligand denticity and introducing softer atom into the sidearm of the ligands significantly influenced catalytic activity, comonomer incorporation, and the molecular weights of the resultant polymers, suggesting that both the steric and the electronic effects of the ligands played an important role in adjusting chain propagation and transfer rate. The chain transfer mechanisms involved in the copolymerization process were investigated by carefully analyzing the microstructure of the copolymers. The signals of vinyl, disubstituted and tri‐substituted vinylene double bond end groups were detected in the copolymer obtained by 2a /Et₂AlCl system but not in those by 2b–c /Et₂AlCl systems, indicating that bulky electron‐donating group, ? P(C₆H₅)₂, may lead to those unusual transfer reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Olefin polymerization and copolymerization by complexes bearing [ONNO]‐Type salan ligands: Effect of ligand structure and metal type (titanium,zirconium, and vanadium)

A series of novel titanium(IV) complexes bearing tetradentate [ONNO] salan type ligands: [Ti{2,2′‐(OC₆H₃‐5‐t‐Bu)₂‐NHRNH}Cl₂] (Lig¹TiCl₂: R = C₂H₄; Lig²TiCl₂: R = C₄H₈; Lig³TiCl₂: R = C₆H₁₂) and [Ti{2,2′‐(OC₆H₂‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴TiCl₂) were synthesized and used in the (co)polymerization of olefins. Vanadium and zirconium complexes: [ M{2,2′‐(OC₆H₃‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴VCl₂: M = V; Lig⁴ZrCl₂: M = Zr) were also synthesized for comparative investigations. All the complexes turned out active in 1‐octene polymerization after activation by MAO and/or Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄]. The catalytic performance of titanium complexes was strictly dependent on their structures and it improves for the increasing length of the aliphatic linkage between nitrogen atoms (Lig¹TiCl₂ << Lig²TiCl₂ < Lig³TiCl₂) and declines after adding additional tert‐Bu group on the aromatic rings (Lig³TiCl₂ < Lig⁴TiCl₂). The activity of all titanium complexes in ethylene polymerization was moderate and the properties of polyethylene was dependent on the ligand structure, cocatalyst type, and reaction conditions. The Et₂AlCl‐activated complexes gave polymers with lover molecular weights and bimodal distribution, whereas ultra‐high molecular weight PE (up to 3588 kg mol^?1) and narrow MWD was formed for MAO as a cocatalyst. Vanadium complex yielded PE with the highest productivity (1925.3 kg mol_v^?1), with high molecular weight (1986 kg mol^?1) and with very narrow molecular weight distribution (1.5). Copolymerization tests showed that titanium complexes yielded ethylene/1‐octene copolymers, whereas vanadium catalysts produced product mixtures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2111–2123     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

A Bis(phenoxy‐imine)Zr Complex for Ultrahigh‐Molecular‐Weight Amorphous Ethylene/Propylene Copolymer

A new bis(phenoxy‐imine)Zr complex has been developed. This complex in conjunction with ⁱBu₃Al/Ph₃CB(C₆F₅)₄ at 70°C produces ultrahigh‐molecular‐weight amorphous ethylene/propylene copolymer with a weight‐average molecular weight of 10 200 000 g/mol versus polystyrene standards, which represents the highest molecular weight known for linear, synthetic copolymers to date.     

Ethylene polymerization by the chromium catalysts based on bidentate [O,PO] or [S,P] ligands

Novel chromium catalysts based on bidentate phenoxy‐phosphinoyl (HO‐2R₁‐4R₂‐6(Ph₂P?O)C₆H₂: R₁ = R₂ = H, 3a ; R₁ = tBu, R₂ = H, 3b ; R₁ = R₂ = tBu, 3c ; R₁ = R₂ = cumyl, 3d ; R₁ = anthracenyl, R₂ = H, 3e ) and thiophenol‐phosphine (HS‐2R₁‐4R₂‐6(Ph₂P)C₆H₂: R₁ = R₂ = H, 4a ; R₁ = SiMe₃, R₂ = H, 4b ) were prepared and characterized. Treatment with modified methyaluminoxane, these catalysts displayed moderate to high‐catalytic activities for ethylene polymerization. The activities of them were higher than those of the corresponding catalysts based on bidentate phenoxy‐phosphine ligands. Both the coordinated donors and the ortho‐substituent of the ligands played an important role in improving catalytic activity. The effects of reaction parameters, such as cocatalyst and Al/Cr molar ratio as well as reaction temperature, on ethylene polymerization behaviors were investigated in detail for two favorable catalytic systems, 3b /CrCl₃(thf)₃ and 4b /CrCl₃(thf)₃. Catalyst 4b /CrCl₃(thf)₃ displayed higher catalytic activity and better temperature tolerance for ethylene polymerization than 3b /CrCl₃(thf)₃. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 311–319, 2010     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Ethylene polymerization by the new chromium catalysts based on amino‐pyrrolide ligands

A series of amino‐pyrrolide ligands ( 1–4a ) and their derivatives amino‐thiophene ligand ( 5a ), amino‐indole ligand ( 6a ) were prepared. Chromium catalysts, which were generated in situ by mixing the ligands with CrCl₃(thf)₃ in toluene, were tested for ethylene polymerization. The preliminary screening results revealed that the tridentate amino‐pyrrolide ligands containing soft pendant donor, 3a, 4a /CrCl₃(thf)₃ systems displayed high catalytic activities towards ethylene polymerization in the presence of modified methyaluminoxane. The electronic and steric factors attached to the ligand backbone significantly affected both the catalyst activity and the polymer molecular weight. Complex 4b was obtained by the reaction of CrCl₃(thf)₃ with one equivalent of the lithium salts of 4a , which was the most efficient ligand among the tested ones. The effect of polymerization parameters such as cocatalyst concentration, ethylene pressure, reaction temperature, and time on polymerization behavior were investigated in detail. The resulting polymer obtained by 4b display wax‐like and possess linear structure, low molecular weight, and unimodal distribution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 713–721, 2009     

Zirconium complexes bearing bis(phenoxy‐imine) ligands with bulky o‐bis(aryl)methyl‐substituted aniline groups: synthesis,characterization and ethylene polymerization behavior

A series of bis(phenoxy‐imine) zirconium complexes bearing bulky o‐bis(aryl)methyl‐substituted aryl groups on the aniline moiety have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as a single chiral C₂‐symmetric isomer in the solution. X‐ray crystallographic analysis of the resulting biszwitterionic‐type adduct complex C1 · 2HCl reveals that the phenoxy‐imine groups function as a monodentate phenoxy ligand and the oxygen atoms are oriented trans to each other at the central metal atom. Using modified methylaluminoxane (MMAO) as co‐catalyst, C1 · 2HCl, C2–C6 exclusively produce linear aluminium‐terminated polyethylenes (Al‐PEs) with high activity (up to 16.89 × 10⁶ g PE (mol Zr h)^?1, suggesting that chain transfer to aluminum is the predominant termination mechanism. It is noteworthy that the introduction of an excessively bulky o‐bis(aryl)methyl substituent adjacent to the imine‐N produces low molecular‐weight Al‐PEs (M_v 1.6–10.1 × 10³) due to the enhanced rate of chain transfer to alkylaluminium groups during polymerization. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylene polymerizations,and the copolymerizations of ethylene with hexene or norbornene with highly active mono(β‐enaminoketonato) vanadium(III) catalysts

Five novel vanadium(III) complexes [PhN = C(R₂)CHC(R₁)O]VCl₂(THF)₂ ( 4a : R₁ = Ph, R₂ = CF₃; 4b : R₁ = t‐Bu, R₂ = CF₃; 4c : R₁ = CF₃, R₂ = CH₃; 4d : R₁ = Ph, R₂ = CH₃; 4e : R₁ = Ph, R₂ = H) have been synthesized and characterized. On activation with Et₂AlCl, all the complexes, in the presence of ethyl trichloroacetate (ETA) as a promoter, are highly active precatalysts for ethylene polymerization, and produce high molecular weight and linear polymers. Catalyst activities more than 16.8 kg PE/mmol_V h bar and weight‐average molecular weights higher than 173 kg/mol were observed under mild conditions. The copolymerizations of ethylene and norbornene or 1‐hexene with the precatalysts were also explored, which leads to high molecular weight copolymers with high comonomer incorporation. Catalyst activity, comonomer incorporation, and polymer molecular weight as well as polydispersity index can be controlled over a wide range by the variation of precatalyst structure and the reaction parameters such as Al/V molar ratio, comonomer feed concentration, and polymerization temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2038–2048, 2008     

Ethylene polymerization with FI complexes having novel phenoxy‐imine ligands: Effect of metal type and complex immobilization

A series of bis(phenoxy‐imine) vanadium and zirconium complexes with different types of R³ substituents at the nitrogen atom, where R³ = phenyl, naphthyl, or anthryl, was synthesized and investigated in ethylene polymerization. Moreover, the catalytic performance was verified for three supported catalysts, which had been obtained by immobilization of bis[N‐(salicylidene)‐1‐naphthylaminato]M(IV) dichloride complexes (M = V, Zr, or Ti) on the magnesium carrier MgCl₂(THF)₂/Et₂AlCl. Catalytic performance of both supported and homogeneous catalysts was verified in conjunction with methylaluminoxane (MAO) or with alkylaluminium compounds (Et_nAlCl_3?n, n = 1–3). The activity of FI vanadium and zirconium complexes was observed to decline for the growing size of R³, whereas the average molecular weight (MW) of the polymers was growing for larger substituent. Moreover, vanadium complexes exhibited the highest activity with EtAlCl₂, whereas zirconium ones showed the best activity with MAO. All immobilized systems were most active in conjunction with MAO, and their activities were higher than those for their homogeneous counterparts, and they gave polymers with higher average MWs. That effect was in particular evident for the titanium catalyst. The vanadium complex 3 was also a good precursor for ethylene/1‐octene copolymerization; however, its immobilization reduced its potential for incorporation of a comonomer into a polyethylene chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes

The copolymerizations of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes {[(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂; R₁ = CF₃ and R₂ = CH₃ for 1a , R₁ = Ph and R₂ = CF₃ for 1b ; and R₁ = t‐Bu and R₂ = CF₃ for 1c } activated with modified methylaluminoxane (MMAO) as a cocatalyst were investigated. High‐molecular‐weight copolymers with cis‐1,2‐cyclopentene units were obtained. The catalyst activity, cyclopentene incorporation, polymer molecular weight, and polydispersity could be controlled over a wide range through the variation of the catalyst structure and reaction parameters, such as the Al/Ti molar ratio, cyclopentene feed concentration, and polymerization reaction temperature. The complex 1b /MMAO catalyst system exhibited the characteristics of a quasi‐living ethylene polymerization and an ethylene–cyclopentene copolymerization and allowed the synthesis of polyethylene‐block‐poly(ethylene‐co‐cyclopentene) diblock copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1681–1689, 2005     

Ethylene polymerization using novel titanium catalytic precursors bearing N,N‐dialkylcarbamato ligands

Polymerization catalysts based on N,N‐dialkylcarbamato complexes of titanium(IV) appear particularly interesting, because these novel catalytic precursors are rather cheap and easy to synthesize and handle. This contribution reports ethylene polymerization behavior of titanium(IV) complexes of general formula Ti(O₂CNR₂)₄ R = Me ( I ) and Et ( II ) and TiCl₂(O₂CNMe₂)₂ ( III ). These precursors in conjunction with methylaluminoxane resulted active catalysts for the polymerization of ethylene, affording high‐density polyethylene with limited branch content. The influence of the polymerization parameters was studied with particular reference to the type of catalyst components, solvent, temperature, monomer concentration, and Al/Ti ratio. The nature of the solvent appears crucial for catalytic performances: when toluene was replaced by chlorobenzene, a significant increase of the productivity was ascertained. The obtained polymers were characterized by DSC, size exclusion chromatography, FTIR, and NMR techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011