Reaction of cyclooctatetraene dianion with halosilanes: Preparation of 3,4-(tetramethyldisiloxy)-1,3,5-cyclooctatriene and 5,8-bis(trimethylsilyl)-1,3,6-cyclooctatriene

The dipotassium salt of cyclooctatetraene dianion, COT^2?, reacts at ?35° with dimethyldichlorosilane, followed by aqueous workup, to give C₈H₈[Si(CH₃)₂]₂O (I) in 4.4% yield. On the basis of spectroscopic (IR, mass, ¹H and ¹³C NMR spectra) and chemical data, compound 1 is formulated as 3,4-(tetramethyldisiloxy)-l,3,5-cyclooctatriene. Reaction of COT^2? with trimethylchlorosilane yields the compound C₈H₈[Si(CH₃)₃]₂ in 50% yield, which is shown to be 5,8-bis(trimethylsilyl)-1,3,6-cyclooctatriene.     

First structural evidence for multiple alkali metals between sandwich decks in a metallocene

A tetralithio salt (1) derived by treating 1,4-bis(trimethylsilyl)-cyclooctatriene with (n)BuLi serves as the first structural evidence for a multi-alkali metallocene. Single-crystal XRD confirms two Li(+) each asymmetrically bind to η(3) and η(4) between two COT' rings and two Li(+) terminally bind to η(3). Solid-state NMR studies confirm the presence of two distinct lithium ion sites while the solution NMR studies suggest the formation of an (COT' dianion) ion-pair in solution. Further treating of the tetralithio salt with NaCl leads to linear sodium polymeric chains. Therefore, simply changing the ionic radius changes the molecular structure.     

Bildung und Eigenschaften von Acylphosphanen. IX. Reaktion von Phenylbis(trimethylsilyl)phosphan mit Formaldehyd und Dimethylformamid

Syntheses and Properties of Acylphosphanes. IX. Reaction of Phenylbis(trimethylsilyl)-phosphane with Formaldehyde and Dimethylformamide Trimethylsilylphosphanes add to carbonyl compounds. Therefore phenyl-bis(tri-methylsiloxymethyl)phosphane 3 can be prepared by reacting phenylbis(trimethylsilyl)phosphane 1 with formaldehyde 2 . With dimethylformamide 4 , however, an addition-elimination-reaction yields hexamethyldisiloxane 6 and N,N-dimethylaminomethyliden-phenylphosphane 5 . NMR-spectroscopic studies show the rotation of the dimethylamino group to be hindered. The dimer 2,4-bis(N,N-dimethylamino)-l,3-diphenyl-l,3-diphosphetane 11 is isolated as a by-product.     

Oligomerization of vinyl- and ethynyl-trimethylsilanes

Oligomerization of vinyl- and ethyl-trimethylsilanes in the presence of homogeneous nickel, cobalt and titanium catalytic systems has been studied. Vinyl-trimethylsilane forms linear dimeric products, 1,4-bis(trimethylsilyl)butenes. Using the titanium catalytic system, in addition to butenyldisilane, a branched dimeric product, 1,3-bis(trimethylsilyl)-3-methylprop-1-ene, and a linear trimer 1,3,6-tris(trimethylsilyl)hex-3-ene are formed. Ethynyltrimethylsilane, in the presence of the nickel catalytic system, is converted into a linear dimer, 1,4-bis(trimethylsilyl)but-3-ene-1-yne, and linear trimer, 1,4,6-tris(trimethylsilyl)hex-3,5-diene-1-yne.     

The reductive dimerization of some 1,3-dienes and of 1,3,5-cycloheptatriene in the presence of trimethylchlorosilane: a DFT investigation

Treatment of 1,3-dienes and 1,3,5-cycloheptatriene by chlorotrimethylsilane in the presence of wire of lithium led mainly to reductive dimerization with formation of bis(allylsilane) derivatives. Bis-silyl compounds obtained: from 1,3-butadiene, 1,8-bis(trimethylsilyl)-2,6-octadiene (70%); from isoprene, (Z,Z)-2,7-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (44%) and 2,6-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (19%); from butadiene-isoprene mixture (1:1), 3-methyl-1,8-bis(trimethylsilyl)-2,6-octadiene (55%); from 2,3-dimethylbutadiene, (E,E)-2,3,6,7-tetramethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (36%), from 1,3-cyclohexadiene, 4,4′-bis(trimethylsilyl)-bicyclohexyl-2,2′-diene (48%); from 1,3,5-cycloheptatriene, 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (53%). The structure of the various intermediates (radical anion, dianion, silylated radical, silylated anion) has been established by calculations at the B3LYP/6-311++G(d,p) level of theory with zero-point energy correction. These results are in accordance with a pathway including the formation of a radical anion, its silylation furnishing to a γ-silylated allylic radical followed by a dimerization reaction in the head to head manner.     

Synthesis, structure, and reactivity of novel 3,4-diphosphacyclobutenes bearing silyl groups

[reaction: see text] Copper-mediated homocoupling of sterically hindered 2-(2,4,6-tri-tert-butylphenyl)-1-trialkylsilyl-2-phosphaethenyllithiums afforded 1,2-bis(trialkylsilyl)-3,4-diphosphacyclobutenes (1,2-dihydrodiphosphetenes) through a formal electrocyclic [2+2] cyclization in the P=C-C=P skeleton as well as 2-trimethylsilyl-1,4-diphosphabuta-1,3-diene. Reduction of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes followed by quenching with electrophiles afforded ring-opened products, (E)-1,2-bis(phosphino)-1,2-bis(trimethylsilyl)ethene and (Z)-2,3-bis(trimethylsilyl)-1,4-diphosphabut-1-ene. The structures of the ring-opened products indicated E/Z isomerization around the C=C bond after P-P bond cleavage of 5, and the isomerization of the P-C=C skeleton. Ring opening of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes affording (E,E)- and (Z,Z)-1,4-diphosphabuta-1,3-dienes was observed upon desilylation.     

Synthesis of new imines and amines containing organosilicon groups

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyl lithium, (Me₃Si)₃CLi, in THF at 0 °C gives 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde (1) and 4,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene (2). The new aldehyde (1) reacts with variety of amines in ethanol to afford the corresponding imines (3) containing vinylbis(trimethylsilyl) group. The newly synthesized imines (3) can be completely converted into amines containing vinylbis(trimethylsilyl) group with an excess amount of NaBH₄. In the case of N-[4-(2,2-bis(trimethylsilyl)ethenyl)benzyl]-2,6-dimethylaniline LiAlH₄ was used as a reducing agent in THF.     

Peculiarities of the reaction of alkali metal bis(trimethylsilyl)amides with halobenzenes

Lithium and sodium bis(trimethylsilyl)amides react with fluoro-, bromo-, and chlorobenzenes in THF or toluene to give a mixture of N,N-bis(trimethylsilyl)aniline and N,2-bis(trimethylsilyl)aniline. The latter compound is resulted from 1,3-shift of the trimethylsilyl group from nitrogen to ortho-carbon atom of the benzene ring. Effects of the solvent, halogen, and alkali metal nature as well as the reaction conditions on the ratio of isomers were examined. Reaction of iodobenzene with sodium bis(trimethylsilyl)amide in THF produces N,N-bis(trimethylsilyl)aniline and 2-iodo-N,N-bis(trimethylsilyl)aniline, while in toluene a mixture of three products, two indicated above and N,N-bis(trimethylsilyl)benzylamine, was obtained.     

Anodic polymerization of dithienosilole and electroluminescent properties of the resulting polymer

Anodic oxidation of 2,6-bis(trimethylsilyl)-4,4-di(p-tolyl)dithienosilole gave a dark orange solid polymer with a small band gap. The spectral analysis of the polymer indicated that decomposition of the dithienosilole ring system had competed the polymerization to an extent. This, however, could be suppressed by optimizing the reaction conditions. Applications of the spin-coated polymer films to electroluminescent materials are described.     

Silicon-carbon unsaturated compounds: XXX. thermal isomerization of 1-mesityl-3-phenyl-1,2-bis(trimethylsilyl)-1-silacyclopropene and 2-mesityl-2-(phenylethynyl)hexamethyltrisilane

The thermolysis of 1-mesityl-3-phenyl-1,2-bis(trimethylsilyl)-1-silacyclopropene at 280°C afforded 1-mesityl-3,3-dimethyl-4-phenyl-5-(trimethylsilyl)-1,3-disilacyclo-4-pentene and 1-mesityl-1,3-bis(trimethylsily)-1-silaindene. Similar thermolysis of 2-mesityl-2-(phenylethynel)hexamethyltrisilane produced the same products.     

A New Protocol to Generate Catalytically Active Species of Group 4–6 Metals by Organosilicon-Based Salt-Free Reductants

Herein, we provide a new protocol to reduce various transition-metal complexes by using organosilicon compounds in a salt-free fashion with the great advantage of generating pure low-valent metal species and metallic(0) nanoparticles, in sharp contrast to reductant-derived salt contaminants obtained by reduction with metal reductants. The organosilicon derivatives 1,4-bis(trimethylsilyl)-2,5-cyclohexadiene ( 1 a ), 1-methyl-3,6-bis(trimethylsilyl)-1,4-cyclohexadiene ( 1 b ), 1,4-bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene ( 2 a ), 2,5-dimethyl-1,4-bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene ( 2 b ), 2,3,5,6-tetramethyl-1,4-bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene ( 2 c ), and 1,1′-bis(trimethylsilyl)-1H,1′H-4,4′-bipyridinylidene ( 3 ) all served as versatile reductants for early transition-metal complexes and produced only easy-to-remove organic compounds, such as trimethylsilylated compounds and the corresponding aromatics, for example, benzene, toluene, pyrazine, and 4,4′-bipyridyl, as the byproducts. The high solubility of the reductants in organic solvents enabled us to monitor the catalytic reactions directly and to detect any catalytically active species so that we could elucidate the reaction mechanism.     

One-Pot Synthesis of N-Boc-2, 5-bis(trimethylsilyl)pyrrolidine

Since Daly reported the structure of epibatidine and its potent analgesic activity in 19921, study on the synthesis of epibatidine and its derivatives and relationships between the structure and activity of epibatidine has received much attention2. During the course of our research for the synthesis of epibatidine derivatives, N-boc-2, 5-bis(trimethylsilyl)pyrrolidine 4 was used as the key intermediate to construct the skeleton of epibatidine via the 1, 3-dipolar cycloaddition (Scheme 1). Ac…     

Gas-chromatographic determination of trace amounts of tetrodotoxin in water,drugs, and blood plasma

A method has been developed for the determination of tetrodotoxin in water, blood plasma, and drugs at a level of 0.05—1.0 µg/mL. The method is based on the hydrolytic decomposition of tetrodotoxin by a sodium hydroxide solution, extraction of 2-amino-6-hydroxymethyl-8-hydroxyquinazoline using liquid–liquid extraction, preparation of its derivative by reaction with N,O-bis(trimethylsilyl)trifluroacetamide, and the determination of the derivative by gas–liquid chromatography with a mass-spectrometric detector.     

Tetrakis(trimethylsilyl)ethylene and related compounds,crowded olefins

Tetrakis(trimethylsilyl)ethylene (1), tris(trimethylsilyl) (dimethylsilyl)ethylene and 1,2-bis(trimethylsilyl)-1,2-bis(dimethylsilyl)ethylene have been prepared and spectral properties are described. ESR spectra of anion and cation radicals of 1 are also recorded, indicating a nonplanar twisted structure for 1. These crowded olefins show interesting reversible thermochromism.     

Preparation of 1,1-disubstituted silacyclopentadienes

Several new 1,1-disubstituted siloles containing substituents on the ring carbon atoms have been synthesized. The new siloles: 1,1-dihydrido-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (5), 1,1-dihydrido-2,5-dimethyl-3,4-diphenylsilole (6), 1,1-dimethoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (7), 1,1-bis(4-methoxyphenyl)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (8), 1,1-dipropoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (9), and 1,1-dibromo-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (13) were prepared from reactions originating from the previously reported, 1,1-bis(diethylamino)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (1) or 1,1-bis(diethylamino)-2,5-dimethyl-3,4-diphenylsilole (2). In addition, three other new organosilane byproducts were observed and isolated during the current study, bis(4-methoxyphenyl)bis(phenylethynyl)silane (11), bis(4-methoxyphenyl)di(propoxy)silane (12) and 1-bromo-4-bromodi(methoxy)silyl-1,4-bis(trimethylsilyl)-3,4-diphenyl-1,3-butadiene (14). Compounds 13 and 14 were characterized by X-ray crystallography and 14 is the first 1,1-dibromosilole whose solid state structure has been determined.     

Effect of substituents on addition polymerization of norbornene derivatives with two Me3Si-groups using Ni(II)/MAO catalyst

Addition polymerization and copolymerization of bis(Me₃Si)-substituted norbornene-type monomers such as 5,5-bis(trimethylsilyl)norbornene-2, 2,3-bis(trimethylsilyl)norbornadiene-2,5 and 3,4-bis(trimethylsilyl)tricyclo[4.2.1.0^2,5]nonene-7, in the presence of Ni(II) naphtenate/MAO catalyst were studied. Disubstituted norbornene and norbornadiene were found to be practically inactive in homopolymerization. On the other hand, their copolymerization with norbornene proceeded with moderate yields of copolymers containing predominantly norbornene units. Under studied reaction conditions 2,3-bis(trimethylsilyl)norbornadiene-2,5 was transformed into the only exo-trans-exo-dimer as a result of the [2+2]-cyclodimerization reaction. Moving Me₃Si-substituents one carbon atom away from norbornene double bond made 3,4-bis(trimethylsilyl)tricyclo[4.2.1.0^2,5]nonene-7 active in homopolymerization and allowed to obtain addition homo-polymer with two Me₃Si-substituents in each elementary unit. The reaction mechanism and steric effect of Me₃Si-substituents are also discussed.     

Fluorsilylsubstituierte N,N- und N,O-bis(trimethylsilyl)-hydroxylamine

Fluoro- und aminofluoro-silanes react with the lithium salt of N,O-bis(trimethylsilyl)hydroxylamine under LiF elimination and substitution. Alkyl- and amino-fluorosilanes give O-fluorosilyl-N,N-bis(trimethylsilyl)hydroxylamines, arylfluorosilanes give N-fluorosilyl-N,O-bis(trimethylsilyl)hydroxylamines. By the further reaction of O-difluorosilyl-N,N-bis(trimethylsilyl)hydroxylamine with the lithiated hydroxylamine, O,O′-fluoromethylsilyldi[N,N-bis(trimethylsilyl)hydroxylamine] is formed. On heating N-difluorophenylsilyl-N,O-bis(trimethylsilyl)hydroxylamine di[fluorophenylsilyl(methyl)amino]pentamethylsiloxane is formed by methyl group migration. The NMR and mass spectra of the compounds are reported.     

Reaction of sodium bis(trimethylsilyl)amide with 2-bromopyridine

A reaction of sodium bis(trimethylsilyl)amide with 2-bromopyridine leads to N,N-bis(trimethylsilyl)- and N,3-bis(trimethylsilyl)-2-pyridinamine.     

Preparation of partially substituted 1-halo- and 1,4-dihalo-1,3-dienes via reagent-controlled desilylation of halogenated 1,3-dienes

Depending on the desilylation reagents used, 1-halo-1,4-bis(trimethylsilyl)-1,3-butadienes afforded either 1-halo-1-trimethylsilyl-1,3-butadienes or 1-halo-4-trimethylsilyl-1,3-butadienes in excellent yields with excellent selectivity, respectively, when treated with CF3COOH or with NaOMe. These monosilylated 1,3-butadiene products could be further desilylated to generate their corresponding halobutadienes via the above reagent-controlled desilylation reaction. When 1,4-dihalo-1,4-bis(trimethylsilyl)-1,3-dienes were treated with MeONa/MeOH at room temperature, desilylation of both of the two trimethylsilyl groups took place to afford their corresponding 1,4-dihalo-1,3-dienes in excellent yields. The commonly used desilylation reagent CF3COOH did not work for these dihalobutadienes.     

Highly regioselective synthesis of 2,3,4-trisubstituted 1H-pyrroles: a formal total synthesis of lukianol A

A combined use of alpha-lithiation and nucleophilic substitutions of N,N-dimethyl 3,4-bis(trimethylsilyl)-1H-pyrrole-1-sulfonamide 8c led to several 2-substituted 3, 4-bis(trimethylsilyl)-1H-pyrrole-1-sulfonamides. Utilizing the beta-effect of a trimethylsilyl group, a highly regioselective synthesis of 2,3,4-trisubstituted 1H-pyrroles 23 and 34 was accomplished. The marine natural product lukianol A (3) was prepared utilizing this strategy.