酶催化动力学光度法测定H2O2

H2O2能够氧化偶氮染料刚果红使之褪色,而模拟酶—血红蛋白对其具有催化作用。据此建立了一种以刚果红为指示剂的H2O2-刚果红-血红蛋白酶催化反应体系测定痕量H2O2的新方法。确定了反应的最佳条件,体系的酸度为pH10.7的NH3-NH4Cl缓冲溶液,最大吸收波长为497 nm。该法的线性范围为8.0×10^-8-8.0×10^-5mol/L,检出限为1.97×10^-9mol/L,表观摩尔吸光系数为4.6×10^4L.mol-1.cm^-1。该方法可用于雨水及消毒水中H2O2的测定。     

Reaction of furan compounds with hydrogen peroxide in the presence of vanadium catalysts

The reactions of furan and a number of its derivatives (furfural, furan-2-carboxylic acid, 2-furfuryl alcohol, and others), in systems containing H₂O₂ and vanadium compounds, proceed through a mechanism of radical hydoxylation of the furan ring with the formation of 5-hydroxy-2(5H)-furanone and maleic acid. The total yield and ratio of the synthesized compounds depend on the reaction conditions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1462–1467, November, 1991.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Flow-injection spectrophotometric determination of azithromycin in pharmaceutical formulations using p-chloranil in the presence of hydrogen peroxide.

A flow-injection (FI) spectrophotometric procedure exploiting merging zones is proposed for the determination of azithromycin in pharmaceutical formulations. The method is based on the reaction of azithromycin with tetrachloro-p-benzoquinone (p-chloranil) accelerated by hydrogen peroxide and conducted in a methanol medium, producing a purple-red color compound (lambda(max) = 540 nm). The FI system and the experimental conditions were optimized using a multivariate method. Beer's law is obeyed in a concentration range of 50 - 1600 microg mL(-1) with an excellent correlation coefficient (r = 0.9998). The detection limit and the quantification limit were 6.6 and 22.1 microg mL(-1), respectively. No interference was observed from the common excipients, and the recoveries were within 98.6 to 100.4%. The procedure was applied to the determination of azithromycin in pharmaceuticals with a high sampling rate (65 samples h(-1)). The results obtained by the proposed method were in good agreement with those obtained by the comparative method at 95% confidence level.     

Highly sensitive spectrophotometric determination of cobalt using o-hydroxyhydroquinonephthalein and hydrogen peroxide in the presence of mixed surfactants

Summary The effects of cobalt(II) and surfactants on the decomposition of various xanthene dyes by hydrogen peroxide have been systematically investigated. A simple and highly sensitive spectrophotometric determination of cobalt(II) (0.05 1.2 g/10 ml) is proposed. The method is based on the catalytic effect of cobalt(II) on the oxidation of o-hydroxyhydroquinonephthalein (Qnph) by hydrogen peroxide. The proposed catalytic spectrophotometric determination was sensitive, selective, reproducible and virtually unaffected by the presence of other ions; the effective molar desorptivity was 4.2×10⁸ l/mol per cm, Sandell sensitivity was 0.15 pg/cm², and the relative standard deviation was 3.2% at 0.6 ng/10 ml (n=5). The selective assays of cobalt(II) in water samples were also investigated with satisfactory results (95% 101%).

---

Hochempfindliche Spektralphotometrische Kobaltbestimmung mit Hilfe von o-Hydroxyhydrochinonphthalein und Wasserstoffperoxid in Gegenwart von oberflÄchenaktiven Substanzen

---

Application of xanthene derivatives in analytical chemistry. Part LXIX. Part LXVIII see ref. [1]     

New water-soluble hydrogen donors for the enzymatic spectrophotometric determination of hydrogen peroxide

Eight N -alkyl-N-V-sulphopropylaniline derivatives have been synthesized and assessed as water-soluble hydrogen donors for the spectrophotometric determination of hydrogen peroxide in the presence of peroxidase. The sodium salts of N-ethyl-N-sulphopropylaniline (ALPS), N-ethyl-N-sulphopropyl-m-toluidine (TOPS) and N -ethyl-N-sulphopropyl-m-anisidine (ADPS) are recommended. They have excellent water solubilities, and the optimum pH range for oxidative condensation with 4-aminoantipyrine in the presence of hydrogen peroxide and peroxidase is 5.5–9.5. The absorbances of the resulting chromogens are 2–3 times higher than that achieved with phenol. The molar absorptivities of the chromogens with 4-aminoantipyrine are 41300 (ALPS, λ_max 561 nm), 37400 (TOPS, λ_max 550 nm) and 27900 (ADPS, λ_max 540 nm). Calibration graphs for the determination of hydrogen peroxide in the presence of a control serum are linear for 7–40 × 10^-6 mol H₂O₂ l^-1.     

Thallimetric oxidations-V Titrimetric and spectrophotometric determination of hydrogen peroxide

Titrimetric and spectrophotometric methods have been developed for the determination of hydrogen peroxide at mmole and mumole levels respectively. In these methods thallium(III) is used as the oxidant and the reduced thallium(I) is determined oxidimetrically with potassium bromate in the titrimetric method and by measuring the absorbance of thallium(III) at 260 nm in the presence of 0.1M hydrochloric acid and 1M perchloric acid in the spectrophotometric method. Photochemical redox methods for the estimation of hydrogen peroxide in the presence of a number of diverse ions are described.     

Highly sensitive spectrophotometric determination of osmium(VIII) with pyrogallolphthalein and hydrogen peroxide in the presence of Brij 35

Summary A highly sensitive determination of osmium(VIII) is based on the decolouring reaction with pyrogallolphthalein (gallein) and hydrogen peroxide in the presence of Brij 35. Beer's law was obeyed in the range of 0–0.5 ng of osmium(VIII) per 10 ml and the apparent decomposed absorption coefficient was 2.5×10⁹ l mol^–1 cm^–1 at 535 nm.Application of xanthene derivatives in analytical chemistry. Part XCIII. Part XCII see ref. [1]     

The determination of hydrazobenzene by the die method with hydrogen peroxide catalyzed with vanadium

Hydrazobenzene cannot be oxidized to azobenzene with hydrogen peroxide in ethanol-containing medium. Vanadium(V) ions catalyze the oxidation; in their presence the reaction takes place rapidly. A thermometric (DIE) method was developed for the determination of hydrazobenzene, based on the oxidation reaction with hydrogen peroxide catalyzed by vanadium(V). The reaction is initiated by the addition of the solution of the catalyst, which is applied in small amount (100l). Thus, the application of the immersion pipette is not necessary. The standard deviation of the determination is ±0.42 mg hydrazobenzene in 50 ml ethanol.

---

Zusammenfassung Hydrazobenzol kann in Äthanolhaltigem Medium mit Wasserstoffperoxid nicht zu Azobenzol oxidiert werden. Vanadium(V)-ionen katalysierten die Oxidation, in ihrer Gegenwart vollzieht sich die Reaktion rasch. Der Autor entwickelt eine thermometrische (DIE) Methode zur Bestimmung von Hydrazobenzol, die auf der durch Vanadium(V)-katalysierten Oxidationsreaktion mit Wasserstoffperoxid beruht. Die Reaktion wird durch Zugabe der in kleinen Mengen (1001) angewandten Katalysatorlösung ausgelöst. Dadurch erübrigt sich der Einsatz von Immersionspipetten. Die Standardabweichung betrÄgt ± 0.42 mg Hydrazobenzol in 50 ml Äthanol.

---

Résumé L'hydrazobenzène ne peut pas Être oxydé par l'eau oxygénée dans un milieu contenant de l'éthanol. Les ions vanadium(V) catalysent l'oxydation et la réaction a Heu à grande vitesse en leur présence. Les auteurs ont développé une méthode thermométrique (DIE) afin d'effectuer le dosage de l'hydrazobenzène. Cette méthode repose sur la réaction d'oxydation par l'eau oxygénée en présence de vanadium(V) comme catalyseur. La réaction est initiée par addition de la solution du catalyseur utilisée en faible quantité (100l). Ainsi, l'emploi d'une pipette d'immersion n'est pas nécessaire. L'écart-type du dosage est ±0.42 mg d'hydrazobenzène dans 50 ml d'éthanol.

---

. (V) . () , , (V). (100l) . . ±0.42 50 .

     

Selective peracetic acid determination in the presence of hydrogen peroxide using a label free enzymatic method based on catalase

Peracetic acid (PAA) is selectively determined in the presence of hydrogen peroxide (H₂O₂) by using the self-indicating UV–Vis molecular absorption properties of catalase. The PAA reacts with the protein giving an intermediate (Cat-I) which is reduced back by the aminoacid core surrounding the hemegroup. Since the original form of the enzyme and the Cat-I have different UV–Vis absorption properties, the absorbance changes can be used for PAA determination. The H₂O₂/catalase reaction is extremely fast so that neither Cat-I compound nor kinetic interferences are observed. The method permits PAA determination in the 5 × 10⁻⁷ to 1.5 × 10⁻⁵ M range, the reproducibility being between 1% and 10%. Using this method, PAA has been successfully determined in water samples treated with commercial PAA/H₂O₂ biocides. A theoretical study has also been carried out for obtaining a mathematical model able to analytically describe the process.     

The reaction of methyl p-nitrophenyl sulfate with hydrogen peroxide anion determination of pKa of hydrogen peroxide in methanol by a kinetic spectrophotometric procedure

A kinetic spectrophotometric investigation of the reaction of the hydrogen peroxide anion with methyl p-nitrophenyl sulfate in methanol solvent resulted in the evaluation of the pK_a of HOOH in methanol at 25°C as 15.8 ± 0.2. Since normal kinetic procedures for the determination of the equilibrium constant K for the process CH₃O^? + H₂O₂ ? CH₃OH + HO were found to be associated with high uncertainty, another procedure was devised to establish the magnitude of K. This method is based on an analysis of the changing slopes of plots of pseudo-first-order rate constants against the total base concentration as the stoichiometric amount of hydrogen peroxide is varied. The method is applicable to any system in which anionic nucleophiles generated in situ compete with solvent anions. Such a corroboration of kinetically determined equilibrium constants is believed essential. The kinetic data allow the specific rate constant k_HOO-for the reaction of methyl p-nitrophenyl sulfate with hydrogen peroxide anions to be evaluated and yield the rate constant ratio k/k = 8.8 ± 2.2. This confirms the existence of an α effect at saturated carbon in this system.     

Flow-injection spectrophotometric determination of molybdenum and vanadium with carminic acid in the presence of cetyltrimethylammonium bromide

The color-forming reactions of molybdenum(VI) and vanadium(IV) with carminic acid (CA) in the presence of cetyltrimethylammonium bromide (CTAB) were used in the flow-injection determination of these metals. The micellar medium enhances the spectrophotometric features of the Mo(VI)-CA and V(IV)-CA binary complexes, and the higher solubility of these complexes when the CTAB concentration is above critical micelle concentration permits the easy application of flow-injection systems. Under the optimum conditions, linear calibration graphs were obtained from 0.76 to 28.8 g/ml for molybdenum and from 0.30 to 9.1 g/ml for vanadium. The detection limits were 0.33 and 0.16 g/ml for molybdenum and vanadium, respectively. The selectivity of the method was investigated and the procedure was successfully applied to the determination of molybdenum in steels and pharmaceuticals and of vanadium in petroleum products.     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained.     

The spectrophotometric determination of vanadium in rocks

Vanadium in rock samples is determined, after alkaline fusion of the sample, by means of its catalytic action on the oxidation of aniline to aniline black by hydrogen peroxide. If necessary, chromium can be easily extracted to prevent interference. The sensitive procedure was applied to standard granite Gi and diabase Wi, and to the C.A.A.S. syenite i ; values of 16, 263 and 86 p.p.m., respectively, were obtained.     

Sensitive spectrophotometric determination of vanadium with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol after extraction with N-benzoyl-N-phenylhydroxylamine

A selective and precise spectrophotometric determination of vanadium(V) is performed after preceding extraction with N-benzoyl-N-phenylhydroxylamine (BPHA). The color is developed in a water-ethanol solution with hydrogen peroxide and 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol (5-Cl-DMPAP). The molar absorptivity at 588 nm is (6.57 ± 0.05) × 10⁴ L mol^–1 cm^–1 at pH 2.1. The method permits the determination of vanadium (V) at trace levels in the presence of large amounts of other ions. It is applied to the determination of vanadium in aluminium (analytical reagent grade) and in human hair. High accuracy and precision is obtained. Received: 18 April 1997 / Revised: 20 June 1997 / Accepted: 25 June 1997     

Extraction spectrophotometric method for determination of aluminium in silicates

A simple, rapid and sensitive method has been worked out for spectrophotometric determination of macro and micro amounts of alumina in ceramic raw materials and finished products, including glasses. The method is based on the extraction of aluminum oxinate into chloroform after masking of titanium with chromotropic acid and of iron with ascorbic acid and 1,10-phenanthroline or ferrocyanide at pH 5.2. The absorbance is measured at 385 nm. Interference by Cu, Zn, Cd, Ni and Co, when present, is overcome by stripping them as cyanide complexes by shaking the chloroform extract with potassium cyanide solution. Zr is masked with quinalizarin sulphonic acid and fluoride with BeSO(4).