Characterization of the patina formed on a low tin bronze exposed to aqueous hydrogen sulfide

The dark gray corrosion layer (patina) formed on the surface of a polished low tin bronze alloy following exposure to a deoxygenated and saturated aqueous solutions of H₂S has been characterized by X‐ray photoelectron spectroscopy, scanning electron microscopy‐energy dispersive spectroscopy and X‐ray diffraction. The system represents a model for bronze corrosion in reducing conditions where sulfate‐reducing bacteria in soils or deoxygenated seawater may generate H₂S during respiration. The initial surface was dominated by metallic copper together with Sn, Pb and Zn oxides and hydroxides. Surface enrichment of Pb and Zn was noted because of a smearing effect during polishing. At least some of the lead was crystalline. In contrast, the corrosion layer formed by H₂S(aq) exposure was dominated by polycrystalline Cu₂S (low and high chalcocite) and smaller concentrations of CuSO₄ · nH₂O. This surface was enriched with Zn as Zn(OH)₂. Lead was present as redeposited PbS (galena) crystallites in at least two different morphologies. Unlike bronzes exposed to oxidizing conditions, which develop protective SnO₂ layers, the H₂S(aq)‐exposed surface was considerably depleted in Sn. Copyright © 2014 John Wiley & Sons, Ltd.     

Micro-Raman study of copper hydroxychlorides and other corrosion products of bronze samples mimicking archaeological coins

Three bronze samples created by CNR-ISMN (National Research Council—Institute of Nanostructured Materials) to be similar to Punic and Roman coins found in Tharros (OR, Sardinia, Italy) were studied to identify the corrosion products on their surfaces and to evaluate the reliability of the reproduction process. Micro-Raman spectroscopy was chosen to investigate the corroded surfaces because it is a non-destructive technique, it has high spatial resolution, and it gives the opportunity to discriminate between polymorphs and to correlate colour and chemical composition. A significant amount of green copper hydroxychlorides (Cu₂(OH)₃Cl) was detected on all the coins. Their discrimination by Raman spectroscopy was challenging because the literature on the topic is currently confusing. Thus, it was necessary to determine the characteristic peaks of atacamite, clinoatacamite, and the recently discovered anatacamite by acquiring Raman spectra of comparable natural mineral samples. Clinoatacamite, with different degrees of order in its structure, was the major component identified on the three coins. The most widespread corrosion product, besides hydroxychlorides, was the red copper oxide cuprite (Cu₂O). Other corrosion products of the elements of the alloy (laurionite, plumbonacrite, zinc carbonate) and those resulting from burial in the soil (anatase, calcite, hematite) were also found. This study shows that identification of corrosion products, including discrimination of copper hydroxychlorides, could be accomplished by micro-Raman on valuable objects, for example archaeological findings or works of art, avoiding any damage because of extraction of samples or the use of a destructive analytical technique.     

Corrosion behavior and morphological features of archeological bronze coins from ancient China

The archeological round bronze coins, nominated as Wu Zhou and regarded as the first issued effective money in the Han Dynasty of China, have been systematically investigated to disclose their chemical composition, nature of the patina and corrosion features on the coin surface by optical microscopy (OM), X-ray diffraction (X-RD), and scanning electron microscopy (SEM) equipped with backscattered electron (BSE) detector and energy dispersive spectrometry (EDS) techniques. It is revealed morphologically that there are some rough surface cracks, pits, and multicolor patina on the surface of the coins. We prove that the coins are made from bronze material of Cu–Sn–Pb–Sb alloy with contents of 84.8–85.4 wt.% Cu, 3.3–6.1 wt.% Sn, 4.7–6.4 wt.% Pb and 2.6–2.9 wt.% Sb, and covered by two corrosion layers, 25–35 μm for the upper-layer and 20–25 μm for the sub-layer. High chloride content has been detected at the interface between the sub-layer and body of the coins. The lead-rich and tin-rich areas in the coin samples indicate the poor metal compatibility during minting in some locations of the coins. The main compositions of patina are ascertained to be Cu₂(OH)₃Cl, Cu₃(CO₃)₂(OH)₂, Cu₂(OH)₂CO₃, and Pb₃O₄, and the proposed corrosion mechanism is discussed.     

Corrosion evolution of UNS C90300 bronze in simulated acid rain of Hong Kong

Corrosion evolutions of UNS C90300 bronzes with and without artificial patina were investigated in the simulated acid rain of Hong Kong. The corrosion products mainly composed of cuprite were formed on the surface exhibiting slight protection for the bronze substrate. The ratios of Sn and Zn in the corrosion products are lower than in the alloy. The artificial patina effectively enhances the corrosion resistance of bronze substrate, even after 30 days of immersion. For both bare and patinated bronzes the Sn- and Zn-based species are absent in the outer layers of corrosion products, and Cu₂O species in the outer layer can partially transform into Cu (II) ionic state due to the abundant supply of dissolved oxygen.     

Microanalysis of blue pigments from the Ptolemaic temple of Hathor (Thebes), Upper Egypt: a case study

The aim of the present work was to characterize blue pigment samples collected from the Ptolemaic temple of Hathor (Thebes), the western bank of Luxor, Upper Egypt. The characterization of the examined pigments was carried out by means of optical microscopy, scanning electron microscopy equipped with an energy dispersive X‐ray detector, micro X‐ray fluorescence spectrometry and Fourier transform infrared spectroscopy. On the basis of the chemical composition and microstructure of the samples, the blue pigments were identified as Egyptian blue (cuprorivaite, CaCuSi₄O₁₀). Moreover, the micro X‐ray fluorescence analysis revealed significant quantities of lead in the glass phase suggesting that a leaded bronze scrap was used to produce the pigment. The optical examination of the paint layers showed that the pigments were applied on a thin layer consisting of gypsum (CaSO₄?2H₂O) and dolomite (CaMg(CO₃)₂). In addition, some pigment samples showed discoloration mainly in the form of green and black hues. The obtained results helped in improving our knowledge about some painting materials used during the Ptolemaic era of ancient Egypt. Copyright © 2012 John Wiley & Sons, Ltd.     

A Study on Kinetics of the Bronze Powder-Corrosion Development

HCl acid was applied to the surface of the self-prepared Cu-Sn-Pb alloy, and the methods of IR-REF, IR-PAS, XRD, SPM, SEM, TEM and pH were employed to study the forming process and the developing speed of the bronze powder-corrosion Cu_2(OH)_3Cl (PC). It is found that the corrosion develops fast in acid environment at room temperature; the corrosion Cu_2(OH)_3Cl with valence Cu~(2+) forms from alloy through the intermediate corrosion CuCl with valence Cu~+; PC is contagious, which can pollute the fresh bronze alloy from the corroded sample by air; when CuCl is oxidized to produce Cu_2(OH)_3Cl, Cu~(2+) cation forms at the same time, and both the oxidizing reactions have zero-order reaction with respect to O_2 in the air; the P1 formation reaction has first-order reaction with respect to Cull; in enormous distilled water Cu_2(OH)_3Cl forms from CuCl through the intermediate product Cu_2O.All the results above are discussed in the present article, and the mechanism of PC formation is studied further. The r     

Synthesis of Cu3Sn Alloy Nanocrystals through Sequential Reduction Induced by Gradual Increase of the Reaction Temperature

Cu₃Sn alloy nanocrystals are synthesized by sequential reduction of Cu and Sn precursors through a gradual increase of the reaction temperature. By transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), UV/Vis spectroscopy, and X‐ray diffraction (XRD) analyses, the alloy formation mechanism of Cu₃Sn nanocrystals has been studied. The incremental increase of the reaction temperature sequentially induces the reduction of Sn, the diffusion of Sn into the preformed Cu nanocrystals, resulting in the intermediate phase of Cu–Sn alloy nanocrystals, and then the formation of Cu₃Sn alloy nanocrystals. We anticipate that the synthesis of Cu₃Sn alloy nanocrystals encourages studies toward the synthesis of various alloy nanomaterials.     

Multianalytical study of corrosion layers in some archaeological copper alloy artefacts

Corrosion layers in some copper and bronze archaeological objects from Haft Tappeh archaeological site, southwest Iran, were studied. For this purpose, optical microscopy, scanning electron microscopy with energy dispersive X‐ray microanalysis, micro‐Raman spectroscopy and X‐ray diffraction methods were applied to observe corrosion stratigraphy and their characteristics as well as identification of chemical composition and phase determination of different corrosion layers. Based on optical and electron microscopy, three different corrosion strata were identified in cross section of different metallic objects including various red, green, white‐grey powdery and dark internal compact layers. Scanning electron microscopy with energy dispersive X‐ray microanalysis on different corrosion layers revealed that Cu, Sn and Cl are the main elements in the chemical composition of different layers. Tin‐rich phases were detected in white‐grey and dark layers that may be formed because of the internal oxidation of tin as well as the decuprification (selective dissolution of copper) phenomena occurring during long‐term burial period in the soil. Also, the XRD and micro‐Raman spectroscopy results proved that the main corrosion products are nantokite (CuCl), copper trihydroxychlorides and copper oxides. The combination of these analytical methods allows us to explore the surface and internal corrosion layers of the archaeological copper and bronze samples, and major interest is on studying their chemistry, microstructural properties and corrosion stratigraphy. Copyright © 2015 John Wiley & Sons, Ltd.     

On Structural Features Necessary for Near‐IR‐Light Photocatalysts

In the search for photocatalysts that can directly utilize near‐IR (NIR) light, we investigated three oxides Cu₃(OH)₄SO₄ (antlerite), Cu₄(OH)₆SO₄, and Cu₂(OH)₃Cl by photodecomposing 2,4‐dichlorophenol over them under NIR irradiation and by comparing their electronic structures with that of the known NIR photocatalyst Cu₂(OH)PO₄. Both Cu₃(OH)₄SO₄ and Cu₄(OH)₆SO₄ are NIR photocatalysts, but Cu₂(OH)₃Cl is not. Thus, in addition to the presence of two different CuO_m and Cu′O_n polyhedra linked with Cu?O?Cu′ bridges, the presence of acceptor groups (e.g., SO₄, PO₄) linked to the metal oxygen polyhedra is necessary for NIR photocatalysts.     

A New Preparative Route of the “Stepped‐Cubane” Tetranuclear Copper(II) Compound, [Cu4(μ2‐OH)2(μ3‐OH)2Cl2(bipy)4]Cl2 · 6H2O

The compound [Cu₄(μ₂‐OH)₂(μ₃‐OH)₂Cl₂(bipy)₄]Cl₂ · 6H₂O ( 1 ) was obtained by recrystallization of [Cu(HB)₂(2, 2′‐bipy)] · H₂O (H₂B = diphenylglycolic acid) from EtOH/CH₂Cl₂ and their structure has been determined by single‐crystal X‐ray analysis. The cationic complex may be described as based on a Cu₄(OH)₄ core with a “stepped cubane” structure. The coordination polyhedron around each copper is a distorted square pyramid. The tetranuclear units are linked in the crystal by C‐H…Cl hydrogen bonds and by π‐π interactions between bipyridine rings. IR data are also presented.     

Surface composition of PdCuAu ternary alloys: a combined LEIS and XPS study

PdCuAu ternary alloy samples with different composition were synthesized on top of ZrO₂‐modified porous stainless steel disks by the sequential electroless deposition technique. The structure, morphology and bulk composition of the samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy and energy dispersive X‐ray spectroscopy (EDX). Complete alloy formation with a pure fcc phase for the Pd₇₁Cu₂₆Au₃, Pd₇₀Cu₂₅Au₅ and Pd₆₇Cu₂₄Au₉ samples and a bcc structure for the Pd₆₂Cu₃₆Au₂ and Pd₆₀Cu₃₇Au₃ samples were obtained upon annealing at 500 °C for 120 h as revealed by XRD. A combination of low‐energy ion scattering (LEIS) and X‐ray photoelectron spectroscopy (XPS) was used to investigate the surface properties of the PdCuAu alloys. XPS results confirmed alloy formation under the annealing conditions. XPS analysis also revealed that the near‐surface regions of the alloys became enriched in Pd with respect to the bulk composition determined by EDX. In contrast, LEIS and angle‐resolved XPS analyses showed that the top‐most surface layers in all samples were copper‐rich compared with the bulk composition. This high Cu surface concentration could impart resistance to bulk sulfide formation to the PdCuAu alloy membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Sonochemical Synthesis of Layered Copper Hydroxy Nitrate Nanosheets

Sonochemical reduction of copper nitrate, using 20 kHz ultrasound in aqueous solutions in the presence of urea, led to the formation of layered copper hydroxy nitrate nanosheets, as evidenced by scanning and transmission electron microscopy images. Fourier‐transform infrared, X‐ray diffraction, and X‐ray photoelectron spectroscopy analyses were used to characterize layered Cu₂(OH)₃NO₃ nanosheets. The ultrasound‐assisted progressive hydrolysis of urea and in situ formation of Cu(0) through the sonochemical reduction process induced homogeneous nucleation and crystallization of layered Cu₂(OH)₃NO₃ nanosheets.     

Electrochemical Characterization of Corrosion Products in Leaded Bronze Sculptures Considering Ohmic Drop Effects on Tafel Analysis

The characterization of corrosion products in leaded bronze based on the voltammetry of immobilized particles methodology is described. Voltammetric data, supported by Fourier transform infra‐red spectroscopy, field emission scanning electron microscopy‐energy dispersive X‐ray microanalysis (FESEM‐EDX) and scanning electrochemical microscopy (SECM) allow the identification of copper and lead corrosion materials. The mutual influence of such products is modeled upon considering uncompensated ohmic drops in the Tafel analysis of the rising portion of the respective voltammetric signals for their electrochemical reduction.     

Laser embedding of TiC particles into the surface of phosphor bronze‐bearing material

A carbon film containing 5% TiC particles is formed on a pre‐prepared bronze surface prior to laser treatment. The carbon film provides increased absorption of the incident laser beam and hosts TiC particles with a uniform distribution at the workpiece surface. Optical and scanning electron microscopy are used to examine the metallurgical and morphological changes in the laser treated layer. Micro‐hardness of the laser‐treated surface is measured, and the residual stress formed in the surface vicinity is measured using the X‐ray diffraction technique. It was found that a dense layer with fine grains was formed in the laser‐treated layer. The micro‐hardness of the laser‐treated surface increases almost three times compared with the base material hardness. The presence of a dense layer and the formation of Cu₃N in the surface region contribute to the hardness enhancement at the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

The electrochemical behaviour of bronze in synthetic seawater

This paper reports a voltammetric study of bronze in synthetic seawater (SSW). The effects of buffering and deoxygenating were particularly visible in the transpassive region. The breakdown of the anodic passive film on bronze leads to a well-defined activation peak in the transpassive region typical of a nucleation and growth of pits. The breakdown potential of the passivity was shown to vary with the experimental conditions, namely, with buffering and deoxygenating. Buffering has shown to lead to more stable passive films and deoxygenating to higher oxidation currents. Scanning electron microscopy with energy dispersive spectrometer (SEM/EDS) studies of bronze samples with 1-month exposure in non-deoxygenated buffered and non-buffered SSW under open circuit potential have shown significant differences in their morphology: a uniformly cracked surface and a surface showing large and spherical precipitates of about 50 μm uniformly distributed along the surface, respectively, for bronze coupons in buffered (pH 9) and in non-buffered SSW. The EDS technique has identified Cu, O, Cl and Na on the corrosion products of bronze in non-buffered SSW, whilst in buffered media, Sn was also identified. In non-buffered media, open circuit potentials have shown to be all the time less negative than in the buffered media. After 1-month exposure the E _OCP of bronze samples in both media seem to converge to −0.131 and −0.155 V vs Ag|AgCl, respectively. This potential can be assigned to the formation of cuprite, Cu₂O and nantokite, CuCl. The analysis of the SEM images after the removal of the corrosion products has shown descuprification with higher intensity on the surface from coupons in non-buffered SSW.     

红外反射及红外—光声光谱法对青铜生锈过程的研究

在自制Cu-Sn-Pb合金表面上进行盐酸腐蚀,用红外反射及红外-光声光谱方法监测粉状锈(Cu_2(OH)_3Cl)的生长过程。结果发现,在酸性环境中Cu_2(OH)_3Cl生长迅速;二价铜锈的生成需通过一价铜锈(CuCl)这一中间产物;粉状锈有传染性,可通过空气由锈蚀样品传至无锈样品,锈体颗粒对光线的散射作用强,结合热力学计算对青铜生锈机理进行了探索。     

Formation of a tetragonal Cu3Au alloy at gold/copper interfaces

A gold–copper alloy with a nominal composition of Cu₃Au but with a tetragonal (c = 4a) structure is observed to form at Au/Cu interfaces of gold/copper multilayers deposited on amorphous substrates by d.c. magnetron sputtering. The formation of this non‐equilibrium structure (tentatively D0₂₃) under‐ambient conditions is detected by secondary ion mass spectrometry, x‐ray diffraction and high‐resolution cross‐sectional transmission electron microscopy. Co‐sputtering of Au and Cu under similar conditions produces only conventional fcc Cu₃Au alloy phases, suggesting that interfacial confinement plays a significant role in producing the novel Cu₃Au alloy phase in gold/copper multilayers. Copyright © 2003 John Wiley & Sons, Ltd.     

Study on corrosion resistance of electroplating zinc–nickel alloy coatings

Electrodeposited zinc–nickel alloy coatings have been widely adopted for surface treatment of automobile body steel sheet for high corrosion resistance. The corrosion behavior of the coatings has been related with the components of nickel, and the zinc–nickel alloy passive coatings have much higher corrosion resistance than that of zinc–nickel alloy coatings. In the present paper, the corrosion resistance behavior of the zinc–nickel alloy coatings obtained by new process and formulation has been studied by means of the electrochemistry test and neutral salt spray test. And it is discovered that the properties of corrosion resistance of zinc–nickel alloy passive coatings were better than that of zinc passive coatings, Cadmium passive coatings and alloys of electrodeposited cadmium–titanium. The components of corrosion productions, in terms of X‐ray diffraction (XRD), are mainly ZnO, ZnCl₂ · 4Zn(OH)₂ and small quantity of 2ZnCO₃· 3Zn(OH)₂. The component of zinc–nickel alloy coatings has been investigated with Glow Discharge Optical Emission Spectrometry (GDA‐750). And it is found that as the thickness of zinc–nickel alloy coatings increases, the component of zinc increases from beginning to end, but the peak value of nickel appears and an enrichment of nickel in the coatings comes into being. Because the electrodeposited zinc–nickel alloy coatings exhibit different alloy phases as a function of their alloy composition, in this paper, the crystal structure changing with the different component of nickel has been studied in terms of XRD. The result shows that electrodeposited zinc–nickel alloy has different phases: α‐phase, a solid solution of zinc in nickel with an equilibrium solubility of about more than 79% nickel; γ‐phase, an intermediate phase with a composition Ni₅Zn₂₁; η‐phase, a solid solution of nickel in zinc with less than 5% nickel; and δ‐phase (Ni₃Zn₂₂) appeared from η‐phase to α‐phase with increasing content of nickel. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,Crystal Structure,and Characterization of Two Oxamido‐bridged NiIICuIINiII Heteronuclear Complexes

Two new trinuclear complexes [Cu^II(Ni^IIX₁)₂(C₂H₅OH)₂]· (ClO₄)₂·2(CH₃OH) ( 1 ) and [Cu^II(Ni^IIX₂)₂(H₂O)]·(ClO₄)₂· 0.75(H₂O) ( 2 ) (X₁ = dianion of 5,6;13,14‐dibenzo‐7,12‐bis(ethoxycarboxyl)‐9‐methyl‐2,3‐dioxo‐1,4,8,11‐tetraazacyclotetradeca‐7,11‐diene. X₂ = dianion of 5,6;13,14‐dibenzo‐9,10‐cyclohexano‐7,12‐bis(ethoxycarboxyl)‐2,3‐dioxo‐1,4,8,11‐tetraazacyclotetradeca7,11‐diene.) have been synthesized and characterized by single crystal X‐ray analysis, elemental analysis, IR, UV and EPR spectroscopies. The complexes consist of Ni^IICu^IINi^II heteronuclear cationic entities. The central Cu^II atom of 1 lies in an octahedral coordination environment, while that of 2 resides in a square‐pyramidal coordination sphere. The adjacent trinuclear units of 1 are linked together through π‐π stacking interactions resulting in a 1D supramolecular chain, whereas the π‐π stacking interactions between the contiguous units of 2 lead to a 2D structure. The EPR spectra of the two complexes show a signal of an axially elongated octahedral Cu^II system in 1 and an axially elongated square‐pyramidal Cu^II system in 2 , respectively. The hyperfine splitting of the Cu^II atoms (I^Cu = 3/2) has also been observed in the EPR spectra.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.