Dielectric and piezoelectric properties of manganese‐modified PbHfO3–PbTiO3–Pb(Mg1/3Nb2/3)O3 ternary ceramics with morphotropic phase boundary compositions

High piezoelectric and electromechanical properties were reported in the PbHfO₃–PbTiO₃–Pb(Mg_1/3Nb_2/3)O₃ ternary system with morphotropic phase boundary (MPB) compositions. This work focuses on the effect of MnO₂ addition on 0.8Pb(Hf_0.443Ti_0.557)O₃–0.2PMN (0.8PHT–0.2PMN) ceramics. It was observed that the Mn acceptor modification induced a “hardening” effect in 0.8PHT–0.2PMN, with decreased piezoelectric coefficients d₃₃ and dielectric loss tan δ and a significantly increased mechanical quality factor Q_m. Moreover, the 0.2 wt% MnO₂‐doped 0.8PHT–0.2PMN ceramics exhibited good piezoelectric and electromechanical properties with d₃₃, planar electromechanical coupling k_p and Q_m being on the order of 360 pC/N, 61% and 700, respectively, showing advantages compared to those of commercial hard PZT4 ceramics, which is attractive for high power applications. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Phase transformation in (0.90−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3-0.10PbZrO3 piezoelectric ceramic: X-ray diffraction and Raman investigation

Piezoelectric ceramics with compositions of (0.90−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃-0.10PbZrO₃, x=0.28, 0.31, 0.34, 0.37, 0.40 and 0.43, were prepared using the conventional columbite precursor method, and their structural phase transformation and piezoelectric behaviors near the morphotropic phase boundary (MPB) have been systematically investigated as a function of PbTiO₃ content. X-ray diffraction (XRD) results demonstrate that the structure of the ceramics experiences a gradual transition process from rhombohedral phase to tetragonal phase with the increasing of PbTiO₃ content, and that compositions with x=0.34-0.40 lie in the MPB region of this ternary system. A Raman spectra investigation of the ceramic samples testified to the transformation process of rhombohedral phase to tetragonal phase by comparing the relative intensities of tetragonal E(2TO₁) mode and rhombohedral phase R_h mode. The structure information was also correlated to the parabola change of the piezoelectric constant; the maximum piezoelectric constants were obtained near the MPB region.     

Phase transition, structural and electrical properties of Pb(Zn1/3Nb2/3)O3-doped Pb(Ni1/3Nb2/3)O3-PbTiO3 ceramics prepared by solid-state reaction method

Phase pure perovskite (1−x−y)Pb(Ni_1/3Nb_2/3)O₃-xPb(Zn_1/3Nb_2/3)O₃-yPbTiO₃ (PNN-PZN-PT) ferroelectric ceramics were prepared by conventional solid-state reaction method via a B-site oxide mixing route. The PNN-PZN-PT ceramics sintered at the optimized condition of 1185 °C for 2 h exhibit high relative density and rather homogenous microstructure. With the increase of PbTiO₃ (PT) content, crystal structure and electrical properties of the synthesized PNN-PZN-PT ceramics exhibit successive phase transformation. A morphotropic phase boundary (MPB) is supposed to form in (0.9−x)PNN-0.1PZN-xPT at a region of x=32-36 mol% confirmed by X-ray diffraction (XRD) measurement and dielectric measurement. The MPB composition can be pictured as providing a “bridge” connecting rhombohedral ferroelectric (FE) phase and tetragonal one since crystal structure of the MPB composition is similar to both the rhombohedral and tetragonal lattices. Dielectric response of the sintered PNN-PZN-PT ceramics also exhibits successive phase-transition character. 0.64PNN-0.1PZN-0.26PT exhibits broad, diffused and frequency dependent dielectric peaks indicating a character of diffused FE-paraelectric (PE) phase transition of relaxor ferroelectrics and 0.40PNN-0.1PZN-0.50PT exhibits narrow, sharp and frequency independent dielectric peaks indicating a character of first-order FE-PE phase transition of normal ferroelectrics. The FE-PE phase transition of 0.56PNN-0.1PZN-0.34PT is nearly first-order with some diffused character, which also exhibits the largest value of piezoelectric constant d₃₃ of 462pC/N.     

Facile preparation and performance of novel high-TC xBi(Ni1/2Ti1/2)O3-(1-x)Pb(Zr1/2Ti1/2)O3 piezoceramics

High Curie temperature (T_C) xBi(Ni_1/2Ti_1/2)O₃-(1-x)Pb(Zr_1/2Ti_1/2)O₃ (xBNT-(1-x)PZT, BNT-PZT) piezoelectric ceramics were prepared by the conventional ceramic processing. The composition-induced morphotropic phase boundary (MPB) and its influences on structure and electrical performance were investigated. The synthesized BNT-PZT ceramics exhibit rather pure perovskite structure, and densified microstructure morphology with uniform elementals distribution in both grains and grain boundaries. With increasing the content of Bi(Ni_1/2Ti_1/2)O₃ (BNT), crystal structure of the BNT-PZT ceramics transform from tetragonal phase to rhombohedral phase, and dielectric response peaks change from narrow shape to very broad shape but all presenting dielectric frequency dispersion. The diffused and relaxation dielectric behavior can be fitted well by the quadratic law, and the Vogel-Fulcher law fitting provides additional information on the relaxation characteristic. The MPB effects are confirmed further by ferroelectric and piezoelectric properties measurements. High-T_C combined with excellent piezoelectric performance can be realized in the BNT-PZT system, which presents promising applications in geothermal exploration, aerospace and related elevated temperatures fields.     

Effect of Ba-substitution on the structure and properties of Pb<Subscript>0.8</Subscript>Ba<Subscript>0.2</Subscript>[(In<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>)<Subscript>1-x</Subscript>Ti<Subscript>x</Subscript>]O<Subscript>3</Subscript> ceramics

Ferroelectric ceramics with formula Pb_0.8Ba_0.2[(In_1/2Nb_1/2)_1-xTi_x]O₃ (PBINT) (x=0.0,0.1,0.2,0.3,0.4 and 0.5) were prepared via a two-step solid state reaction method. It was found that ceramics with compositions in the range of x=0.0∼0.3 showed a pseudo-cubic structure, whereas the ceramic with x=0.5 displayed a tetragonal structure. All compositions showed significant frequency dispersion in their dielectric properties. The remanent polarization P_r as well as the coercive field E_c, measured at room temperature, increases with the Ti content. The experimental results obtained in this system are summarized into a phase diagram, with the morphotropic phase boundary (MPB) located at x=0.4. Compared with the Pb[(In_1/2Nb_1/2)_1-xTi_x]O₃ solid solution system, incorporating Ba in the A-site leads to a significant decrease in the dielectric maximum temperature T_max, a suppression of the dielectric relaxation parameter γ, and a shift of the MPB composition to a higher Ti content. PACS 77.84.Dy; 77.80.Bh; 77.22.Ch     

The piezoelectric effect in Pb[(Fe1/3Sb2/3) x Ti y Zr z ]O3 ceramics

The piezoelectric properties of Pb[(Fe_1/3Sb_2/3) _x Ti _y Zr _z ]O₃ with x + y + z = 1, x = 0.1, y = 0.43–0.48 ceramics have been investigated over a broad temperature range using a resonance technique. The influence of modification of PZT normal ferroelectric synthesized near the morphotropic phase boundary by a relaxor Pb(Fe_1/3Sb_2/3)O₃ compound on its physical properties was studied. The coefficients s ₁₁, k ₃₁, and d ₃₁ were calculated from the parameters characterizing the behavior of damped harmonic oscillator in the vicinity of the piezoelectric resonance. Several anomalies of the piezoelectric coefficients have been found in the temperature range 300–600 K. Two diffuse phase transitions were observed in Pb[(Fe_1/3Sb_2/3) _x Ti _y Zr _z ]O₃. The anomaly near 530 K for y = 0.43 is responsible for the transition from the rhombohedral phase to the tetragonal one. For y > 0.44 this transition is found to be very diffuse and the coexistence of rhombohedral and tetragonal phases occurs. The observation of low piezoelectric activity confirms the existence of polar regions in Pb[(Fe_1/3Sb_2/3) _x Ti _y Zr _z ]O₃ above T _m.     

Concentration dependences of the properties of multicomponent PZT-based piezoelectric ceramics in the morphotropic transition range

The following three ternary PZT-based systems are studied in detail: 0.98Pb(Ti_xZr_1−x )O₃-0.02Pb(Nb_1/2Bi_1/2)O₃, 0.98(Pb_0.9727Sr_0.0273)(Ti_xZr_1−x )O₃-0.02Pb(Nb_1/2Bi_1/2)O₃ + 1 wt% PbO, and 0.98(Pb_0.9727Sr_0.0273)(Ti_xZr_1−x )O₃-0.02Pb(Nb_1/2Bi_1/2)O₃ + 2 wt % PbGeO₃, where 0.45 ≤ x ≤ 0.49 and the concentration step is Δx = 0.025. A number of concepts are formulated regarding the phase diagrams of PZT-type systems near the morphotropic transition. A scheme for real tetragonal-rhombohedral transformation is given. The maxima of the electrophysical characteristics of the solid solutions from the morphotropic range are shown to be caused mainly by an appearing intermediate phase. Analysis of the insulating, piezoelectric, and mechanical properties of the samples demonstrates that there is a group of solid solutions that are promising materials for high-temperature piezoelectric devices operating in the medium-frequency band.     

Giant dielectric constant observed in Ba0.96Sr0.04Zrx Y0.005Ti0.995–xO3–δ ceramics

Ba_0.96Sr_0.04Zr_x Y_0.005Ti_0.995–xO_3–δ ceramics were prepared by conventional sintering. The dielectric properties and the Curie temperature of the ceramics were studied. The Ba_0.96Sr_0.04Zr_x Y_0.005Ti_0.995–xO_3–δ ceramics (x = 0.04) exhibit a giant dielectric constant (ε_r ～ 10⁵). The peak value of dielectric constant is ～250,000 at 100 Hz and ～70,000 at 1 MHz for Ba_0.96Sr_0.04Zr_x Y_0.005Ti_0.995–xO_3–δ ceramics (x = 0.04). The results show that Ba_0.96Sr_0.04Zr_x Y_0.005Ti_0.995–xO_3–δ (x = 0.04) ceramics are a promising candidate material for microelectronic applications. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Templated Grain Growth of Textured Piezoelectric Ceramics

Crystallographic texturing of polycrystalline ferroelectric ceramics offers a means of achieving significant enhancements in the piezoelectric response. Templated grain growth (TGG) enables the fabrication of textured ceramics with single crystal-like properties, as well as single crystals. In TGG, nucleation and growth of the desired crystal on aligned single crystal template particles results in an increased fraction of oriented material with heating. To facilitate alignment during forming, template particles must be anisometric in shape. To serve as the preferred sites for epitaxy and subsequent oriented growth of the matrix, the template particles need to be single crystal and chemically stable up to the growth temperature. Besides templating the growth process, the template particles may also serve as seed sites for phase formation of a reactive matrix. This process, referred to as Reactive TGG (RTGG), has been used to obtain highly oriented Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃, Sr_0.53Ba_0.47Nb₂O₆, and (Na_1/2Bi_1/2)TiO₃-BaTiO₃. Highly oriented Bi₄Ti₃O₁₂, Sr₂Nb₂O₇, CaBi₄Ti₄O₁₅, Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃, Sr_0.53Ba_0.47Nb₂O₆ and (Na_1/2Bi_1/2)TiO₃-BaTiO₃ ceramics have been produced by TGG. The resulting ceramics show texture levels up to 90%, and significant enhancements in the piezoelectric properties relative to randomly oriented ceramics with comparable densities. For example, piezoelectric coefficients of textured piezoelectrics are from 2 to 3 times higher than polycrystalline ceramics and as high as 90% of the single crystal values. In textured PMN-PT, a low field (< 5 kV/cm) piezoelectric coefficient (d ₃₃) of ～1600 pC/N was obtained with > 0.3% strain (at 50 kV/cm). The high field dielectric and electromechanical properties of textured perovskites are more hysteretic than those of single crystals, probably as a result of clamping by the residual template particles, residual random grains, the presence of non-ferroelectric second phases, and a wide orientation distribution. Lateral clamping of one grain by another may also be an important factor in fiber-textured samples. Means to further improve the quality of texture and thus properties of textured piezoelectric ceramics by TGG are presented.     

Piezoelectric, dielectric and magnetic properties of (1-x)Pb[Zr, Ti, (Mg1/2W1/2), (Ni1/3Nb2/3)]O3+x(Ni, Co, Cu)FeO4 composites

The phase structure, microstructure, piezoelectric properties, dielectric characteristic and the ME effect of magnetoelectric Pb[Zr_0.23Ti_0.36+0.02(Mg_1/2W_1/2)+0.39(Ni_1/3Nb_2/3)]O₃ (PZT)+xNi_0.8Co_0.1Cu_0.1Fe₂O₄ (NCCF) composite ceramics were prepared by the conventional solid state reaction method. The structural analysis of both the constituent phases and their composites was carried out by X-ray diffraction, energy dispersive spectrometry and scanning electron microscopy. The results showed cubic spinel structure for ferrite phase and tetragonal perovskite structure for ferroelectric phase. The piezoelectric constant, dielectric constant, Curie temperature, remanent polarization and coercive electric field decreased with increase of ferrite content. The coercive field strength, saturation magnetization and remanent magnetization increased with increasing ferrite content.     

Structure, ferroelectric and piezoelectric properties of (Bi1−x−yNa0.925−x−yLi0.075)0.5BaxSryTiO3 lead-free piezoelectric ceramics

Lead-free multi-component ceramics (Bi_1−x−yNa_{0.925−x−y}Li_0.075)_0.5Ba_xSr_yTiO₃ have been prepared by an ordinary sintering technique and their structure and electrical properties have been studied. All the ceramics can be well-sintered at 1100 °C. X-ray diffraction patterns shows that Li⁺, Ba²⁺ and Sr²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure, and a morphotropic phase boundary (MPB) is formed at 0.04 < x < 0.08. As compared to pure Bi_0.5Na_0.5TiO₃ ceramic, the coercive field E_C of the ceramics decreases greatly and the remanent polarization P_r of the ceramics increases significantly after the formation of the multi-component solid solution. Due to the MPB, lower E_C and higher P_r, the piezoelectricity of the ceramics is greatly improved. For the ceramics with the compositions near the MPB (x = 0.04–0.08 and y = 0.02–0.04), piezoelectric coefficient d₃₃ = 133–193 pC/N and planar electromechanical coupling factor k_P = 16.2–32.1%. The depolarization temperature T_d reaches a minimum value near the MPB. The temperature dependences of the ferroelectric and dielectric properties suggest that the ceramics may contain both the polar and non-polar regions at temperatures near/above T_d.     

A method for determining a solid solution of the Pb(Hf1−yZry)1−xTixO3 type used for electromechanical energy conversion

The mechanical stress-forced Ferroelectric F→Antiferroelectric AF transition energy conversion is reviewed. The temperature-composition phase diagram of PbHf_1−xTi_xO₃+1%La₂O₃ is established. The composition of a suitable material such as a ternary solid solution of the Pb(Hf_1−yZr_y)_1−xTi_xO₃+1%La₂O₃ type, characterized by a low transition pressure, is theoretically determined by a graphic construction using the Goldschmidt factor. Experimental results on the prepared material are given.     

Dielectric, ferroelectric and pyroelectric properties of Pb[(Ni1/3Sb2/3)xTiyZrz]O3 ceramics

In the present study, various Pb[(Ni_1/3Sb_2/3)_xTi_yZr_z]O₃ where x+y+z=1, x=0.08 and y=0.44-0.49, ceramics in the morphotropic phase boundary (MPB) range were studied by dielectric and pyroelectric methods. The results of the investigations revealed an MPB composition range of y≅0.46. The study of the dielectric properties of these compounds as a function of temperature suggests that with increase in y the permittivity maximum increases and transition temperature shifts towards higher temperature. Well-saturated polarization versus electric field (P-E) hysteresis loops were obtained and values of P_r were calculated. The samples revealed good pyroelectric properties for y=0.44 and y=0.45 at room temperature with large figures of merit F_v=0.019 m²/C and F_D=1.34×10^-5Pa^1/2.     

Dielectric and piezoelectric properties of lead-free (Na0.5K0.5)NbO3-SrTiO3 ceramics

In this article, we report successful preparation of dense [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ (x=0.005-0.100) ceramics by ordinary sintering in air. The dependence of phase structure on doping content of SrO and TiO₂ has been determined by the X-ray diffraction technique. It was found that the crystal structure changed from orthorhombic to tetragonal at x≈0.040. Dielectric study revealed that the dielectric relaxor behavior was induced by doping of SrO and TiO₂ into (Na_0.5K_0.5)NbO₃. The samples in the composition range from x=0.005 to 0.020 exhibited excellent electrical properties, piezoelectric constant of electromechanical planar and thickness coupling coefficients of k_p=26.6-32.5% and k_t=39.8-43.8%. The results show that the [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics are one of the promising lead-free materials for electromechanical transducer applications.     

Phase transformation behavior and dielectric characteristics of BaTi1−x(Al1/2Nb1/2)xO3 (0.01≤x≤0.40) ceramics

Microstructure, phase transformation behavior and dielectric properties of BaTi_1−x(Al_1/2Nb_1/2)_xO₃ (0.01≤x≤0.40) ceramics were investigated. A high level of (Al_1/2Nb_1/2)⁴⁺ substitution for Ti⁴⁺ ions was not conducive to the stability of the perovskite structure and resulted in the formation of BaAl₂O₄. As x was increased, lattice constants and unit cell volume decreased, reached a minimum at x=0.10 and then increased. The BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics at room temperature experienced a transformation from ferroelectric to paraelectric phase with increasing (Al_1/2Nb_1/2)⁴⁺ concentration. Meanwhile, permittivity of the BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics was markedly reduced, while Q value was slightly increased. Frequency dispersion of dielectric peak was obviously increased as x was increased from 0.01 to 0.10. It is of great interest that a dielectric abnormity represented by a broad dielectric peak at 200-400 K was observed for the composition with x=0.40.     

Predominant factors affecting the dielectric and piezoelectric properties of bismuth-containing complex perovskite solid solution

To study the factors affecting the dielectric and piezoelectric properties of bismuth-containing complex perovskites, the solid solution (1−x)Pb(Mg_1/3Nb_2/3)O₃-xBi(Mg_2/3Nb_1/3)O₃ was prepared by the solid state reaction method and its dielectric and piezoelectric properties were investigated. It is found that (1) at room temperature, the nonlinearity of the DE-loop for Pb(Mg_1/3Nb_2/3)O₃ is completely suppressed at a rather low x (<5%); (2) dielectric constant versus temperature curves deviate from the Curie-Weiss law at a temperature T_d much higher than the dielectric constant peak temperature T_m and T_m−T_d decreases considerably with increasing x; and (3) frequency dispersion ΔT_m=T_m (1 MHz)−T_m (10 kHz) increases with increasing x. Possible factors responsible for the variation of the dielectric and piezoelectric properties with x are discussed.     

Electric field effects on the dielectric and acoustic anomalies of Pb[(Mg1/3Nb2/3)0.83Ti0.17]O3 single crystals studied by dielectric and Brillouin spectroscopies

The effect of the electric field on the dielectric and acoustic properties of Pb[(Mg_1/3Nb_2/3)_0.83Ti_0.17]O₃ single crystals was investigated as functions of temperature and the electric field strength. The dielectric constant and the acoustic mode behaviors exhibited typical relaxor behaviors when there was no bias field. The longitudinal acoustic mode showed splitting under a moderate electric field of 1 kV/cm applied along the [001] direction, indicating coexistence of macroscopic/mesoscopic ferroelectric states and relaxor states. Further increase in the electric field up to 2 kV/cm induced a clear ferroelectric phase transition, which became smeared out due to the proximity of the electric field to the critical point. The electric field-temperature phase diagram of Pb[(Mg_1/3Nb_2/3)_0.83Ti_0.17]O₃ was suggested based on the observed field-induced changes in the dielectric and the acoustic properties.     

Combinatorial processing libraries for bulk BiFeO3–PbTiO3 piezoelectric ceramics

A high throughput approach for generating combinatorial libraries with varying processing conditions for bulk ceramics has been developed. This approach utilized the linear temperature gradient in a tube furnace to screen a whole temperature range for optimized preparation. With this approach, the processing of 0.98[0.6BiFeO₃–0.4PbTiO₃]–0.02Pb(Mg_1/3Nb_2/3)O₃ ceramic powders and pellets for high-temperature piezoelectric applications was demonstrated to identify the best synthesis conditions for phase purity. The dielectric property measurement on the as-processed solid solution ceramics confirmed the high Curie temperature and the improved loss tangent with the Pb(Mg_1/3Nb_2/3)O₃ doping.     

Microstructure,dielectric, and piezoelectric properties of 0.38Bi(Gax Sc1–x )O3–0.62PbTiO3 high temperature piezoelectric ceramics

0.38Bi(Ga_x Sc_1–x )O₃–0.62PbTiO₃ (BGSPTx) ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that BGSPTx has a pure perovskite structure, and the crystal symmetry of BGSPTx changed from rhombohedral to tetragonal with increasing Ga content (x). The Curie temperature (T_C) of BGSPTx ceramics is in the range of 448–467 °C for different x. The ferroelectric phase transition of BGSPTx was found to be of the first order type according to the Curie–Weiss law. For x = 0.125, BGSPTx ceramics show enhanced piezoelectric properties: piezoelectric constant d₃₃ = 420 pC/N and d₃₁ = –142 pC/N, planar and thickness electromechanical coupling factors k_p = 56.27% and k_t = 56.00%, respectively. The high‐T_C of BGSPTx coupled with its excellent piezoelectric properties suggests those future high‐temperature applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dielectric and polar order behaviors of BaTiO<Subscript>3</Subscript>-Bi(Mg<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics

New perovskite solid solution ceramics of (1−x)BaTiO₃-xBi(Mg_1/2Ti_1/2)O₃ ((1−x)BT-xBMT, x≤0.09) were synthesized by the solid-state reaction technique. X-ray diffraction studies have revealed a stable single perovskite structure for all samples. Dielectric measurements were carried out at different frequencies and temperatures. The polarization evolutions with temperatures were measured to investigate the ferroelectric properties. All the compositions show features of ferroelectrics with diffuse phase transition, though the temperature T _m of their dielectric constant maximum ε _m is frequency dependent. The dielectric constant peak ε(T) of (1−x)BT-xBMT ceramics become broad with increasing BMT content. During the temperature range of ε(T) peak summit, (1−x)BT-xBMT ceramics present quasi-linear dielectric phenomenon under high electric field with very high dielectric constant.