Extraction of plutonium(IV) from oxalic acid-nitric acid solutions by Aliquat-336

The extraction of Pu(IV) from oxalic acid-nitric acid mixtures has been investigated using a liquid anion exchanger, Aliquat-336, in xylene. The presence of oxalic acid is known to have adverse effects on the extraction of Pu(IV) by Aliquat-336. The use of cations, Al(III), Fe(III) or Zr(IV) was explored to overcome the effect of oxalic acid on Pu(IV) extraction. The data obtained reveal that Pu(IV) is quantitatively extracted by Aliquat-336, even in the presence of oxalic acid, when Al(III), Fe(III) or Zr(IV) is added. The extracted Pu(IV) can be back-extracted using aqueous ammonium carbonate.     

Selective separation of indium from zinc, lead, gallium and many other elements by cation-exchange chromatography in hydrohalic acid-acetone medium

Indium can be separated from Zn, Pb(II), Ga, Ca, Be, Mg, Ti(IV), Mn(II), Fe(III), Al, U(VI), Na, Ni(II) and Co(II) by selective elution with 0.50M hydrochloric acid in 30% aqueous acetone from a column of AG50W-X8 cation-exchange resin, all the other elements being retained by the column. Lithium is included in the elements retained by the column when 0.35M hydrochloric acid in 45% aqueous acetone is used for eluting indium, but the elution of indium is slightly retarded. Ba, Sr, Zr, Hf, Th, Sc, Y, La and the lanthanides, Rb and Cs should also be retained according to their distribution coefficients. Cd, Bi(III), Au(III), Pt(IV), Pd(II), Rh(III), Mo(VI) and W(VI) can be eluted with 0.20M hydrobromic acid in 50% aqueous acetone before the elution of indium, and Ir(III), Ir(IV), As(III), As(V), Se(IV), Tl(III), Hg(II), Ge(IV), Sb(III) and Sb(V), though not investigated in detail, should accompany these elements. Relevant distribution coefficients and elution curves and results for analyses of synthetic mixtures of indium with other elements are presented.     

Determination of niobium in pyrochlore ore by differential pulse polarography

A differential pulse polarographic method has been developed for the quantitative determination of niobium in pyrochlore ore. One-step polarographic curves were obtained in 0.01 mol L(-1) EDTA as supporting electrolyte. Analytical curves indicated that response was linearly dependent on Nb(V) concentration between 1.6 and 8.6 mg L(-1) in the pH range 2-5. The system is quasi-reversible and controlled by diffusion in 0.01 mol L(-1) EDTA as supporting electrolyte; the electrode process involves one-electron reduction of Nb(V) to Nb(IV). The results obtained so far for niobium in pyrochlore ore were comparable with those obtained by X-ray fluorescence determination. Ions such as Fe(III), Cr(III), As(III), Cu(II), Ni(II), Co(II), Mn(II), Sn(IV), Zn(II), V(V), Ta(V), W(VI), Ce(IV), and Ti(IV) did not interfere. Possible interference from Pb(II) can be avoided by complexation with the supporting electrolyte in the pH range 3.5 to 4.6; Mo(VI) ions can be tolerated when their concentration is one-tenth that of Nb(V).     

Anion-exchange behavior of various metals in hydrazoic acid media

The adsorption characteristics for 43 metals on a strongly basic ion-exchange resin Bio-Rad AG1 were examined in 0.5 M hydrazoic acid solution. The distribution coefficients for V(IV), Fe(III), Cu(II), Zn, Se(IV), Mo(VI), Pd(II), Cd, In(III), Rc(VII), Hg(II) and U(VI), which showed very strong adsorption except for Cd, were measured as a function of hydrazoic acid concentration over the range 0.05–0.5 M. Favorable differences in the distribution coefficients allow useful two- and three-component separations such as Co(II)-Fe(III), As(III)-V(IV), Cd-Zn, Cd- Hg(II), Te(IV)-Se(IV), Th-U(VI), Mn(II)-Mo(VI)-Re(VII), to be achieved on a small column.     

Synthesis of new ionic β-cyclodextrin polymers and characterization of their heavy metals retention

In this study, a new aqueous insoluble ionic β-cyclodextrin polymer (PYR), synthesized by reaction of β-cyclodextrin with pyromellitic anhydride [1], is characterized by IR spectroscopy, showing typical cyclodextrin and carboxylic absorptions. pH-metric titrations of the acidic functions with standard NaOH solutions followed by a refinement of protonation constants, with specific software for equilibrium in solution, have been performed. Through this approach, the pK _a values of the functional groups have been calculated. The complexation capabilities of PYR towards metal ions [Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II), Pt(IV), Tl(I), and U(IV)] have been evaluated in aqueous solution (pH 3–5). The retention is mainly pH dependent and higher than 70% for Al(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pd(II), Cd(II) and U(IV). For Tl(I) and Pt(IV) the retention is about 60% and 40% respectively.     

Indirect cerimetric determination of gold at the milligram level

Summary A rapid volumetric method has been worked out for the indirect determination of 0.25–2.5 mg of gold in presence of many common ions. It is based on the reduction of gold(III) to metal with excess of cobalt(II) in the presence of 1,10-phenanthroline at pH 3 and 50°, and estimation of the unreacted cobalt(II) in the filtrate by visual, potentiometric or biamperometric titration with standardized cerium(IV) sulphate solution. It has been found that there is no interference from Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(III), Cr(III), Ti(IV), V(V) and W(VI). Interference due to Pd(II) and Ag(I) can be eliminated. Fe(III), Cu(II), Mo(VI), Hg(II) and Pt(IV) interfere, even present in small amounts.

---

Zusammenfassung Ein schnelles maßanalytisches Verfahren zur indirekten Bestimmung von 0,25–2,5 mg Gold in Gegenwart vieler Ionen wurde ausgearbeitet. Es beruht auf der Reduktion zu metallischem Gold mit überschüssigem Kobalt(II) in Anwesenheit von 1,10-Phenanthrolin bei pH 3 und 50°. Die Rückbestimmung des unverbrauchten Kobalts im Filtrat erfolgt durch potentiometrische oder biamperometrische Titration mit Cer(IV)sulfat. Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(II), Cr(III), Ti(IV), V(V) und W(VI) stören nicht. Eine Störung durch Pd(II) oder Ag(I) kann man ausschalten. Fe(III), Cu(II), Mo(VI), Hg(II) und Pt(IV) stören auch in geringen Mengen.

     

Analytical possibilities of pyridine-2-acetaldehyde benzoylhydrazone as a chromogenic reagent

With a view to the use of pyridine-2-acetaldehyde benzoylhydrazone is an analytical reagent, a study of the physical properties and fundamental solution chemistry of the complexes formed by PABH with Fe(II), Fe(III), Ni(II), Pd(II), V(V), Ti(IV), Hg(II), Mn(II), Zn(II), Bi(III), Co(II), Cu(II), Pb(II), and Ga(III) metal ions has been carried out. A critical comparison of pyridine-2-carbaldehyde and pyridine-2-acetaldehyde salicyloylhydrazones and pyridine-2-acetaldehyde benzoylhydrazone as analytical reagents is given.     

Development of liquid-liquid extraction and separation method for ruthenium(III) with 2-octylaminopyridine from succinate media: Analysis of catalysts

Ruthenium(III) has been efficiently extracted from 0.05 M sodium succinate at pH 9.5 by 2-octylaminopyridine in xylene and stripped with aqueous 10% (w/v) thiourea solution and determined spectrophotometrically. Various parameters viz., pH, weak acid concentration, reagent concentration, stripping agents, contact time, loading capacity, aq.: org. volume ratio, solvent has been thoroughly investigated for quantitative extraction of ruthenium(III). The utility of method was analyzed by separating the ruthenium(III) from binary mixture along with the base metals like Cu(II), Ag(I), Fe(II), Co(II), Bi(III), Zn(II), Ni(II), Se(IV), Te(IV), Al(III) and Hg(II) as well as platinum group metals (PGMs). Ruthenium(III) was also separated from ternary mixtures like Os(VIII), Pd(II); Pd(II), Pt(IV); Pd(II), Au(III); Pd(II), Cu(II); Fe(II), Cu(II); Ni(II), Cu(II); Co(II), Ni(II); Se(IV), Te(IV); Rh(III), Pd(II); Fe(III), Os(VIII). The stoichiometry 1: 2: 1 (metal: succinate: extractant) of the proposed complex was determined by slope analysis method by plotting graph of logD _[Ru(III)] versus logC _[2-OAP] and logD _[Ru(III)] versus logC _[succinate]. The interference of various cations and anions has been studied in detail and the statistical evaluations of the experimental results are reported. The method was successfully applied for the analysis of ruthenium in various catalysts, synthetic mixtures corresponding to the composition of alloys and minerals.     

Extraction behavior of Tm(III), Dy(III) and Sm(III) lanthanide with N-benzoyl-N-phenylhydroxalamine

The extraction of Sm(III), Dy(III) and Tm(III) with N-benzoyl-N-phenylhydroxalamine (BPHA) in benzene at pH range (1–10) has been studied. Quantitative separation was found in borate media at pH 8. The slope analysis showed that the extracted complex was M(BPHA)₃, where M=Sm(III), Dy(III) and Tm(III). The effect of various masking agents indicated that EDTA, oxalate, fluoride, phosphate and citrate, interfered in this study. Decontamination study showed that Cu(II), Zn(II), Ni(II), Co(II), Cr(III), Sc(III) and Fe(III) had very poor separation factors, whereas Sn(II), Cd(II), In(III), Ru(II), Hg(II), Ag(I), Ta(V) and Hf(IV) had very large separation factor. The effect of different diluents showed that carbontetrachloride, chloroform, benzene, toluene, nitrobenzene dichloromethane, MIBK and cyclohexanone were equally good for extraction except TBP due to ion association.     

Chloroform extraction of ethyl xanthate complexes from sulphuric acid media

The chloroform extraction of 30 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Ce) from 0.1-8M sulphuric acid in the presence of potassium ethyl xanthate has been studied. Pd(II), Bi, As(III), Sb(III), Se(IV) and Te(IV) are completely extracted and Au(III) is largely extracted over the range of acid concentration investigated. Fe(II), Tl(I), Rh(III) and Cr(VI) are only slightly extracted and Se(VI), Te(VI), Ru(III), Cr(III), Mn(II), Zn, Ce(IV), Ir(IV) and Ge(IV) are not extracted at all. Depending on the acid concentration, the remaining elements are all partly extracted. Results are compared with those obtained in an earlier study of the extraction of xanthate complexes from hydrochloric acid media. The processes involved in the formation of some xanthate complexes and potential analytical separations are discussed.     

Preparation and properties of a new chelating resin containing 2-nitroso-1-naphthol

A new chelating ion-exchange resin based on a macroreticular polystyrene—divinyl benzene copolymer and containing 2-nitroso-1-naphthol as the functional species has been synthesized. It is highly stable in acidic and alkaline solutions. Its sorption characteristics for V(V), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Hg(II), Pd(II) and U(VI) have been investigated over the pH range 1.0–7.0 and the exchange-capacities have been found to be generally higher than those of a similar resin containing 1-nitroso-2-naphthol.     

Inorganic polarography in organic solvents-III Analytical applications of metal-acetylacetonate complexes in toluene

Indium and palladium are determined polarographically with a dropping mercury electrode in a toluene phase, following extraction as the acetylacetonates from aqueous solutions containing 2-10 ppm of the metals (or 0.1-0.5 ppm with a greater ratio of sample volume to solvent volume). Of 31 elements examined, only Co(III), Cr(III), Cu(II), Fe(III), In, Mo(VI), Pd and Ti(IV) gave extractable complexes with reduction waves in the available potential range. Specificity for palladium is obtained by extraction at pH 0.5, and for indium at pH 9 m the presence of cyanide and ascorbic acid as masking agents.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Extraction of thiocyanate complexes of cobalt(II) by diphenyl-2-pyridylmethane in benzene from mineral acid solutions

Extraction of Co(II) by diphenyl-2-pyridylmethane (DPPM) in benzene form mineral acid solutions containing potassium thiocyanate has been studied at room temperature (23±2°C). Its extraction from mineral acids alone is rather poor. Optimal aqueous phase composition for the quantitative extraction of Co(II) by 0.1M DPPM is 0.1M acid+0.2M KSCN. Stoichiometric studies indicate that an ionic type complex, (DPPM·H)₂·Co(SCN)₄, is responsible for extraction. The metal can be back-extracted from the organic phase by aqueous acetate, citrate or oxalate solutions. Separation factors from other metals determined under optimal conditions reveal that Co(II) can be quantitatively separated from CsI), Sr(II), Cr(III), Ln(III), Zr(IV), Hf(IV), Cr(VI) and Tc(VII), Mo(VI), Zn(II), Au(III), Hg(II) and U(VI) are, however, coextracted and hence should be previously removed by other techniques or reagents.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Indirect complexometric determination of cadmium(II) using 1,10-phenanthroline as selective masking agent

An indirect complexometric method is described for the determination of cadmium(II), 1,10-phenanthroline being used as masking agent. Cadmium(II) in a given sample solution is initially complexed with an excess of EDTA and the surplus EDTA is titrated with lead nitrate solution at pH 5.0–6.0 (hexamine), using xylenol orange as indicator. An excess of 1,10-phenanthroline is then added and the EDTA released from the Cd-EDTA complex is titrated with standard lead nitrate solution. Results are obtained for 1.5–57 mg of Cd with relative errors 0.90% and standard deviations 0.06 mg. Cu(II), Co(II), Hg(II), Ni(II), Zn(II), Pd(II), Tl(III), Au(III) and Sn(IV) interfere, but can be easily masked. The method is applied for the determination of cadmium in synthetic alloy solutions.     

Extraction—spectrophotometric determination of manganese(II) with xanthates

Manganese(II) (0.04–2 μmol) is extracted into chloroform from an aqueous phase at pH 6.5–9.0, containing a large excess of (n-butyl) xanthate and measured spectrophotometrically at 457 nm. The apparent molar absorptivity is 5.5 × 10³ dm³ mol^-1 cm^-1. The extractability of the manganese complexes decreases in the order n-butyl = benzyl- ? n-propyl- ? ethyl- ? methyl-xanthate. Interfering ions can be removed by a preliminary extraction with ethylxanthate. Ni, Co, Zn, Cd, Pb, Hg(II), Fe(III), As(III), Ce(III), Se(IV), V(V), Mo(VI), and the alkali and alkaline earth metals do not interfere.     

Evaluation of the toluene-3,4-dithiol (TDT)-trioctylamine (TOA) synergic extraction system

Synergic extraction of different essential and toxic metal ions such as Mn(II), Co(II), Zn(II), Hg(II), Cd(II) and Se(IV) has been carried out using toluene-3,4-dithiol (TDT) and trioctylamine (TOA) in chloroform. A strong synergic effect in the extraction of Co(II), Mn(II) and Zn(II) has been observed. The effect of different anions on the extraction has also been analyzed. Ascorbate ions can easily separate Hg(II) and Se(IV) ions. The stability of synergic adduct and reaction mechanism are discussed.     

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.     

Spectrophotometric determination of copper(II) using oximidobenzotetronic acid

Summary Oximidobenzotetronic acid (OBTA) is proposed as a sensitive spectrophotometric reagent for the estimation of 0.5–3.0 ppm of copper(II) at 427 nm in 50% dioxan at p_H 5.3–7.5. For the estimation of 2 ppm Cu(II), 1.3 ppm Ni(II), 1.3 ppm Co(II), 3.2 ppm Fe(II), 10.3 ppm Fe(III), 9.7 ppm Ce(IV), 300 ppm acetate, 160 ppm oxalate, 95 ppm tartrate, 50 ppm citrate, as well as Zn(II), Cd(II), Hg(II)) Pb(II), Mn(II), As(III) as well as (V), Th(IV), Be(II), Ce(III), La(III), V(V) and Mo(VI), even when present in large quantities, do not interfere. The interference due to 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) and 30 ppm W(VI) can be removed by the addition of 95 ppm tartrate ions.

---

Zusammenfassung Oximidobenzotetronsäure wurde als empfindliches Reagens zur spektrophotometrischen Bestimmung von 0,5 bis 3,0 ppm Kupfer(II) bei 427 nm in 50%iger Dioxanlösung bei p_H 5,3 bis 7,5 vorgeschlagen. Die Anwesenheit von 1,3 ppm Ni(II), 1,3 ppm Co(II), 3,2 ppm Fe(II), 10,3 ppm Fe(III), 9,7 ppm Ce(IV), 300 ppm Acetat, 160 ppm Oxalat, 95 ppm Tartrat, 50 ppm Citrat sowie die Anwesenheit auch großer Mengen Zn(II), Cd(II), Hg(II), Pb(II), Mn(II), As(III) bzw. (V), Th(IV), Be(II), Ce(III), La(III), V(V) und Mo(VI) stören die Bestimmung von 2 ppm Cu(II) nicht. Der störende Einfluß von 25 ppm Bi(III), 20 ppm Sb(III), 20 ppm Sn(II), 25 ppm Sn(IV) und 30 ppm W(VI) kann durch Zusatz von 95 ppm Tartrat beseitigt werden.