We report on the photoconductance in two‐dimensional arrays of gold nanorods. The arrays are formed by a combination of droplet deposition and stamping methods. We find that the plasmon induced photoconductance is sensitive to the linear polarization of the exciting photons consistent with the excitation of the longitudinal surface plasmon resonance of the nanorods.
In this Letter we demonstrate that hydrogen‐terminated porous silicon (PSi) layers and powders can serve as highly efficient reductive templates for noble metal salts. The reduction results in metal nanoparticle (NP) formation in the pores of PSi. Gold NP formation has been monitored in‐situ by measuring the plasmon resonance response. Pt NPs, formed in the PSi matrix, were investigated by transmission electron microscopy and energy‐dispersive X‐ray analysis. Furthermore, hybrid Pt/PSi nanocomposites exhibit a high catalytic activity for CO oxidation.
This is a personal history of one of the Japanese researchers engaged in developing a method for growing GaN on a sapphire substrate, paving the way for the realization of smart television and display systems using blue LEDs. The most important work was done in the mid to late 1980s. The background to the author's work and the process by which the technology enabling the growth of GaN and the realization of p‐type GaN was established are reviewed. ***
Nanostructures formed in a titanium dioxide (TiO2)–poly(styrene)‐block‐poly(ethyleneoxide) nanocomposite film on top of fluor‐doped tin oxide (FTO) layers are investigated. The combinatorial approach is based on probing a wedge‐shaped FTO‐gradient with grazing incidence small angle X‐ray scattering (GISAXS) in combination with a moderate micro‐focus X‐ray beam. The characteristic lateral length is given by adjacent nanowire‐shaped TiO2 regions. It decreases from 200 nm on the thick FTO layer to 90 nm on the bare glass surface.
Optically transparent and high‐quality hybrid ZnO nanoparticle and anthracene embedded polyphenylsiloxane (PPS) glass films were spin‐coated on quartz substrates. A strong Förster resonant energy transfer (FRET) process was indicated by the observation of quenching of the ZnO emission and an enhancement of the anthracene emission at room temperature. The efficiency of this energy transfer between ZnO and the S1 vibronic states of the anthracene molecules can be optimized to exceed 90%.
Electric control of magnetism is demonstrated in a multiferroic metal–organic framework with a perovskite structure. A moderate electric field of a few kV/cm applied during the cooling process is able to cause a large (more than 50%) change of the magnetization at low temperature. This significant magnetoelectric effect is ascribed to the electric field manipulation of orientation of hydrogen bonds that modify the superexchange interaction between metal ions.
We report a very simple and novel approach to produce anodic TiO2 nanotube arrays with highly defined and ordered tube openings. It is based on carrying out anodization through a slowly soluble photoresist coating. This eliminates the formation of undesired initiation layers on the tube tops and protects them to a certain extent from etching by the electrolyte.
The non‐destructive method of Brillouin spectroscopy was applied to investigate the vibrations of 2D titanium nanoislands. Simulations realized by the Finite Element Method permitted determination of the dispersion relations of the surface waves propagating in the island structure and silicon substrate as well as the width of the frequency gap for the system studied. 3D maps of unit cell deformation for the structure with nanoislands for individual modes were obtained. The Brillouin experiment is shown as an excellent tool for direct experimental determination of the presence of eigenvibrations and the frequency gap in phononic structures in the GHz range.
ZnO thin films with a rippled surface structure were used as electron‐collecting layers of inverted organic photovoltaics (OPVs). Using additional ultrathin layers of ZnO and TiO2 fabricated using atomic layer deposition (ALD), not only the power‐conversion efficiency of the OPVs could be increased (up to 3.5%), but also the photovoltaic performance became nearly constant within 100 days without any additional encapsulations of the solar cells under ambient conditions.
A new method for fabricating carbon nanotube‐conducting polymer (CNT‐CP) composite single nanowires is reported. The method developed is highly efficient, reliable, and economical because it obviates the time consuming process of template fabrication and the post‐synthesis task of positioning nanowires. Single nanowires with diameters of 50‐500 nm are fabricated between electrodes, self‐templated by dielectrophoresis and electropolymerization. Fabrication of an individually addressed nanowire array with cantilever electrodes on a microchip is demonstrated.
In this Letter, a novel modified anodization was utilized to synthesize high‐aspect‐ratio, top‐open and ultraflat‐surface TiO2 nanotubes. The interruption of voltage during anodization leads to the formation of a double‐layered structure. Due to the weak mechanical connection between the upper and the underlying layer, the two parts can be easily detached. Compared with the conventional ultrasonication method to remove the clusters of nanotubes where rough surfaces resulted, this efficient and reliable strategy may facilitate further applications of TiO2 nanotubes in diverse conditions.
Steady‐state and time‐resolved photoluminescence of silicon nanoparticles dispersed in low‐polar liquids at above room temperature is studied. The roles of low‐polar liquids as well as mechanisms responsible for their temperature‐dependent photoluminescence are discussed. The thermal sensitivity of the photoluminescence is estimated and application of the nanoparticles as nanothermometers is proposed.
The metastability of the bixbyite‐ and corundum‐type In2O3 polymorphs up to 33 GPa (at room temperature) is shown. While compressed (in diamond anvil cells) and laser‐heated, both polymorphs undergo a phase transition to the Rh2O3‐II‐type structure (space group Pbcn, No. 60). The direct transition from bixbyite to Rh2O3‐II structure has not yet been observed for any other oxide.
Graphene, the two‐dimensional form of carbon presents outstanding electronic and transport properties. This gives hope for the development of applications in nanoelectronics. However, for industrial purpose, graphene has to be supported by a substrate. We focus here on the graphene‐on‐SiC system to discuss how the SiC substrate interacts with the graphene layer and to show the effect of the interface on graphene atomic and electronic structures.
We present a design study of 3D photonic poly‐Si microarchitectures on 2 µm periodically textured glass substrates for application as absorber layers in crystalline Si thin‐film solar cells. Different arrays of microholes and microcones were fabricated in a low‐cost process, by combining high rate electron beam evaporation, nanoimprint technology and self‐organized solid phase crystallization. Two promising designs exhibiting strong absorption enhancement were identified by optical analysis. High angular acceptance and calculated maximum achievable short‐circuit current density of 27.6 mA/cm2 for an effective Si thickness of 1.1 µm highlight the optical potential of these microarchitectures as broadband absorbers in polycrystalline Si thin‐film solar cells.
We report the fabrication procedure and the characterization of an Al0.3Ga0.7As solar cell containing high‐density GaAs strain‐free quantum dots grown by droplet epitaxy. The production of photocurrent when two sub‐bandgap energy photons are absorbed simultaneously is demonstrated. The high quality of the quantum dot/barrier pair, allowed by the high quality of nanostructured strain‐free materials, opens new opportunities for quantum dot based solar cells.
The Fe3O4(111)/graphene/Ni(111) trilayer is proposed to be used as an ideal spin‐filtering sandwich where the half‐metallic properties of magnetite are used. Thin magnetite layers on graphene/Ni(111) were prepared via successive oxidation of a thin iron layer predeposited on graphene/Ni(111) and the formed system was investigated by means of low‐energy electron diffraction and photoelectron spectroscopy. The electronic structure and structural quality of the graphene film sandwiched between two ferromagnetic layers remain unchanged upon magnetite formation as confirmed by experimental data.
Polymer nanocomposites containing different concentrations of Au nanoparticles have been investigated by small angle X‐ray scattering and electronic absorption spectroscopy. The variation in the surface plasmon resonance (SPR) band of Au nanoparticles with concentration is described by a scaling law. The variation in the plasmon band of ReO3 nanoparticles embedded in polymers also follows a similar scaling law.
Angle‐resolved photoemission spectroscopy (ARPES) and X‐ray photoemission spectroscopy have been used to characterise epitaxially ordered graphene grown on copper foil by low‐pressure chemical vapour deposition. A short vacuum anneal to 200 °C allows observation of ordered low energy electron diffraction patterns. High quality Dirac cones are measured in ARPES with the Dirac point at the Fermi level (undoped graphene). Annealing above 300 °C produces n‐type doping in the graphene with up to 350 meV shift in Fermi level, and opens a band gap of around 100 meV.
下载免费PDF全文