Fluorescence spectroscopic study of dip coated sol-gel thin film internal environment using fluorescent probes Hoechst33258 and Pyranine

The characterization of physicochemical properties of the internal environment of sol-gel thin films is required for understanding and designing applications in optical biosensors. We have investigated the dip coated tetraethyl-orthosilicate (TEOS) derived sol-gel thin films deposited on microscopic glass cover slips using molar ratio (water or ethanol / TEOS) R=32 using fluorescence spectroscopic measurements (emission, lifetime and anisotropy) on entrapped fluorescent probes. The effect of water and/or ethanol was studied as a function of storage (60 days) using fluorescent probes Hoechst 33258 (H258) and Pyranine (PY). Distribution of fluorescent probes in thin film was studied using confocal microscope. Emission maxima of H258 entrapped thin films from sol prepared using water as solvent showed emission maximum at 503 nm indicating the presence of water like environment which did not change during storage. On the contrary, PY entrapped thin films depicted emission bands at 434 nm and 513 nm, characteristics of ethanol and water respectively, up to the first few weeks and then the band at 434 nm prevailed (60 days), suggesting heterogeneous internal environment. Thin films from sol prepared using ethanol as solvent showed presence of ethanol through out storage. Fluorescence lifetime data of these probes in both sol-gel and thin films also suggested presence of heterogeneous internal environment. Thin films prepared from sol-gel using water as solvent suggested release of ethanol in the pores during hydrolysis and condensation reaction, which were clearly indicated by PY. The effect of sodium phosphate buffer was also studied in sol-gel and thin films. The results of these measurements showed that both the probes H258 and PY could be used effectively in monitoring the physicochemical properties of internal environment of thin films and sol-gel as a function of storage.     

牡励中脂肪酸在储藏过程中的稳定性

用超临界流体萃取及ＧＣ－ＭＳ分析了新冷冻干燥及保存１５ｄ,３０ｄ,４５ｄ,６０ｄ,７５ｄ,９０ｄ后的鲜牡蛎粉中的２３种脂肪酸组分的质量分数。发现在存放过程中牡蛎脂肪酸的稳定性与其不饱和度有关;不饱和度越高,脂肪酸越易被氧化,其中多不饱和记酸的氧化是逐渐进行的,没有特定的稳定期。     

2,2'－联吡啶桥连的双－4,4'-联吡啶哑铃型化合物的合成

二甘醇2与对甲苯磺酰氯在CH_2Cl_2中，0 ℃～r.t.及Et_3N存在下反应得2－ （羟乙氧基）乙醇对甲苯磺酸酯（3），收率88％。化合物3与对叔丁基苯甲酰氯在 CH_2Cl_2中0～5 ℃及吡啶存在下反应得2－（对叔丁基苯甲酰氧基乙氧基）乙醇对 甲苯磺酸酯（4），收率96％。4与对羟苯甲醇在乙腈中及CsF/K_2CO_3存在下70 ℃ 反应得2－（对叔丁基苯甲酰氧基乙氧基）乙氧苄醇（5），收率98％。5与NBS及 PPh_3在THF中，室温下反应得化合物2－（对 丁基苯甲酰氧基乙氧基）乙氧苄溴 （6），收率95％。6与4,4'－联吡啶在乙腈中，60 ℃反应1h得N－[2－（对叔丁基 苯甲酰氧基乙氧基）乙氧苄基]－4,4'－联吡啶六氟磷酸盐（7），收率85％。7与 α,α－二（溴甲基）－2,2'－联吡啶在乙腈中，油浴60 ℃反应36h，得到标题化 合物，产率为45％。     

采用超临界CO2萃取技术提取废次烟叶中的茄尼醇

采用超临界CO2萃取技术提取废次烟叶中的有效成分茄尼醇,以乙醇为夹带剂,研究了萃取压力、萃取温度、CO2的流量、萃取时间、夹带剂的使用、分离温度和原料粒度等方面对萃取效果的影响,并对其中影响较为显著的因素进行了正交试验,通过极差和方差分析确定了萃取体系适宜的工艺条件。萃取压力为20 MPa,萃取温度为45℃,CO2的流量为15 L/h,萃取时间为2 h,夹带剂为95%的乙醇,分离温度为40℃,原料粒度为40~60目。     

Immobilization of amyloglucosidase using two forms of polyurethane polymer

Amyloglucosidase was covalently immobilized using two hydrophilic prepolymers: Hypol FHP 2002 (creates foams) and Hypol FHP 8190H (creates gels). The foamable prepolymer was superior as a support for enzyme immobilization. The percent activity immobilized in the polyurethane foams was 25 +/- 1.5%. Large substrates (greater than 200,000 daltons in mol wt) were hydrolyzed as effectively as smaller ones by the immobilized enzyme. The Km value of the foam-immobilized enzyme increased from 0.76 mg/mL (free) to 0.86 mg/mL (immobilized), whereas the Vmax dropped from 90.9 (free) to 12.4 nmol glucose/min/mL (immobilized). The long-term (2 mo) storage stability of amyloglucosidase was enhanced by immobilization in foams (70% activity retained; free enzyme only retained 50%). Immobilization also improved the enzyme stability to various denaturing agents (sodium chloride, urea, and ethanol). The immobilized enzyme exhibited increased stability compared to the free enzyme at high temperatures (95 degrees C). Both glycogen and starch could be utilized by the immobilized enzyme, indicating that this technique could prove useful for starch hydrolysis.     

Radiolabeling of anti-carcinoembryonic antigen (CEA) monoclonal antibody (MAb BW 431/26) for clinical applications

A method for labeling of anti-carcinoembryonic antigen (CEA) monoclonal antibody (MAb) BW 431/26 is described. For preparations of^99mTc-anti-CEA complex, a solution (1 ml) of tetrasodium-1,1,3,3-propanetetetraphosphate dihydrate (2.7 mg), stannous chloride dihydrate (0.12 mg) and sodium chloride (0.2 mg) in 5 ml of 0.9% saline was added to a vial containing monoclonal antibody (2 mg) from mouse (MAb BW 431/26), D-glucitol (2 mg) and sodium sulfate (2 mg) to obtain a clear solution. A quantitative labeling yield of the MAb BW 431/26 was achieved by addition of 5 ml (40.5 mCi, 1.5 Gbq) technetium-99m-pertechnetate (^99mTcO₄) generator eluate at room temperature within 10 minutes. The radiochemical purity determined by ITLC (Gelman, SG) plates was >95%.     

Interactions between poly(vinyl chloride) stabilised with epoxidised sunflower oil and food simulants

Commercial sunflower oil was epoxidised and used as organic co-stabiliser for rigid and plasticised poly(vinyl chloride) (PVC) containing Zn and Ca stearates as primary stabilisers and stearic acid as lubricant. For applications in the packaging of foodstuffs, migration testing must be performed. The detection and the quantification of contaminants migrating from the polymer into the food simulants are essential for the safety assessment of food contact plastic packaging materials. For that purpose, two food simulants were used: olive oil and 15% (v/v) aqueous ethanol. These represent fatty and moist food and beverages, respectively. The test conditions were 12 days at 40 °C. Circular samples of rigid PVC and PVC plasticised with dioctyl phthalate were immersed in a known volume of food simulant. A circular sample and 10 ml of food simulant were taken off every day to be analysed. Each sample was wiped and weighed. The rate of variation of the mass was determined as a function of time. The evolution of the peroxide index of olive oil with time was analysed. The specific migrations of the present additives were investigated by using two analytical methods (atomic absorption spectrometry and Fourier transform infrared spectroscopy). The influence of various parameters such as the nature of food simulant, the presence or the absence of the plasticiser, the agitation and time of contact was considered.     

PERVAPORATION OF ETHANOL/WATER MIXTURES WITH HIGH FLUX BY ZEOLITE-FILLED PDMS/PVDF COMPOSITE MEMBRANES

Thin-film zeolite-filled silicone/PVDF composite membranes were fabricated by incorporating zeolite particles into PDMS(poly(dimethylsiloxane)) membranes.The morphology of zeolite particles and zeolite filled silicone composite membranes were characterized by SEM.The zeolite-filled PDMS/PVDF composite membranes were applied for the pervaporation of ethanol/water mixtures and showed higher flux compared with that reported in literatures.The effect of zeolite loading and Si/Al ratio of zeolite particles on...     

FTIR investigation of the specific migration of additives from rigid poly(vinyl chloride)

Commercial sunflower oil was epoxidized and used as organic costabiliser for rigid poly (vinyl chloride) (PVC) containing zinc and calcium stearates as primary stabilisers and stearic acid as lubricant. For applications in the packaging of foodstuffs, migration testing must be realised. For that purpose, two food simulants were used (sunflower oil and 15% (v/v) aqueous ethanol). The test conditions were 12 days at 40 °C. Circular samples of rigid PVC were immersed in a well known volume of food simulant. A circular sample and 10 ml of food simulant were taken off every day to be analysed. The specific migrations of the additives were investigated by using Fourier transform infrared spectroscopy.The direct analysis of the food simulants was difficult because overlapping of the bands of the additives. However, the analysis of PVC films obtained by dissolution of the circular samples in tetrahydrofuran and evaporation of the solvent was more conclusive. The specific migrations of the metal carboxylates and epoxidized sunflower oil were evidenced.     

Quartz crystal microbalance sensor array for the detection of volatile organic compounds

A sensor array system consisting of five quartz crystal microbalance (QCM) sensors (four for measuring and one for reference) and an artificial neural network (ANN) method is presented for on-line detection of volatile organic compounds. Three ionic liquids, 1-butyl-3-methylimidazolium chloride (C₄mimCl), 1-butyl-3-methylimidazolium hexafluorophosphate (C₄mimPF₆), 1-dedocyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C₄mimNTf₂), and silicone oil II, which is widely used as gas chromatographic stationary phase, have been selected as sensitive coatings on the quartz surface allowing the sensor array effective to identify chemical vapors, such as toluene, ethanol, acetone and dichloromethane. The success rate for the qualitative recognition reached 100%. Quantitative analysis has also been investigated, within the concentration range of 0.6-6.1 mg/L for toluene, 0.9-7.5 mg/L for ethanol, 2.8-117 mg/L for dichloromethane, and 0.7-38 mg/L for acetone, with a prediction error lower than 8%.     

Improvement of water vapor adsorption ability of natural mesoporous material by impregnating with chloride salts for development of a new desiccant filter

The aim of this study is the development of a new adsorbent for the desiccant material which can be regenerated by the domestic exhaust heat by using natural mesoporous material, Wakkanai siliceous shale. To improve this shale’s performance to adsorb/desorb the water vapor, lithium chloride, calcium chloride or sodium chloride was supported into the mesopores by impregnating with each chloride solution. Especially sodium chloride was effective to increase the water vapor adsorption amount 5–7 times of that of natural shale in the relative humidity range from 50 to 70%. Moreover, the appropriate impregnating concentrations were determined as 5wt% from the relationship between the maximum water vapor adsorption amount and the mesopore volume. Based on these results, a new desiccant filter has been developed by impregnated original paper with lithium chloride and sodium chloride. This paper contained shale powder in the synthetic fibers. The dehumidification performance of this filter was evaluated under the simulated summer condition in Tokyo. From the cyclic adsorption/regeneration test, this shale and chlorides filter could adsorb and desorb 60 g/h water vapor repeatedly at the regeneration temperature of 40°C. On the other hand, a silica gel filter and a zeolite filter adsorbed and desorbed only 10 g/h and 25 g/h, respectively. These results suggested that the shale impregnated with the chlorides has the best dehumidification ability as a new desiccant material. Further, the desiccant filter made from the shale will achieve the effective use of the low temperature exhaust heat.     

Component Analysis and Anti-Colorectal Cancer Mechanism via AKT/mTOR Signalling Pathway of Sanghuangporus vaninii Extracts

Sanghuangporus vaninii (Ljub.) L.W. Zhou & Y.C. Dai (SV) is a major cultivar of Sanghuang, which is well known as an excellent anti-tumour drug and reaches the mainstream market in China. Water, 60% ethanol and 95% ethanol were used to extract the drug, and three kinds of polar extracts were obtained separately. Compared with water extracts and 95% ethanol extracts, the 60% ethanol extract had the highest flavonoid content, and its polysaccharide content was greater than that in the 95% ethanol extract and lower than that in the water extract. Its essential components were phenolics whose majority were phenolic acids, flavonoids and phenylpropanoids. This extract has better inhibition effects on the proliferation of SW480 human colon cancer cells, inducing cell apoptosis and blocking G2/M period cells. It can significantly inhibit gene expression and reduce the activation of the AKT/mTOR signalling pathway. The anti-cancer activity of the 60% ethanol extract is satisfactory and may be a result of the combined effects of polysaccharides and flavonoids. The data suggest that the 60% ethanol extract can be used as an adjuvant for chemotherapy and as a potential anti-cancer agent with broad development prospects.     

Study on the isolation, purification and physicochemical properties of polysaccharides from Indocalamus tesselatus

Polysaccharides prepared from Chinese traditional medicine "Ruoye" (Indocalamus tesselatus), a kind of bamboo leaves, were studied. Eight crude polysaccharides were isolated from the dried leaves by successive extraction with 85% ethanol (FE), 0.9% sodium chloride (FS), hot water (FI), 1% ammonium oxalate (FII), 5% NaOH (FIII-a, FIII-b) and 20% NaOH (FIV-a, FIV-b). They were decolorized by hydrogen peroxide treatment and the protein was removed with Savag's method. The polysaccharides were precipitated by three volumes of absolute ethanol. After further purification by gel filtration chromatography on a Sephadex G-200 column, these polysaccharides were lyophilized. Their physicochemical properties and structural feature were elucidated by modern analytical technique such as UV, elemental analysis and high performance gel permeation chromatography. From the results of partial hydrolysis, FE and FIII-b have a main chain comprised solely of glucuronic acid and xylose residues, respectively.     

Combination of Spray-Chilling and Spray-Drying Techniques to Protect Carotenoid-Rich Extracts from Pumpkin (Cucurbita moschata) Byproducts,Aiming at the Production of a Powdered Natural Food Dye

Reducing waste, using byproducts, and natural food additives are important sustainability trends. In this context, the aim of this study was to produce and evaluate a natural food dye, extracted from pumpkin byproducts, powdered and protected by spray-chilling (SC) and a combination of spray-drying and spray-chilling techniques (SDC). The extract was obtained using ethanol as solvent; vegetable fat and gum Arabic were used as carriers. Formulations were prepared with the following core:carrier ratios: SC 20 (20:80), SC 30 (30:70), SC 40 (40:60), SDC 5 (5:95), SDC 10 (10:90), and SDC 15 (15:85). The physicochemical properties of the formed microparticles were characterised, and their storage stability was evaluated over 90 days. The microparticles exhibited colour variation and size increase over time. SDC particles exhibited the highest encapsulation efficiency (95.2–100.8%) and retention of carotenoids in the storage period (60.8–89.7%). Considering the carotenoid content and its stability, the optimal formulation for each process was selected for further analysis. All of the processes and formulations produced spherical particles that were heterogeneous in size. SDC particles exhibited the highest oxidative stability index and the highest carotenoid release in the intestinal phase (32.6%). The use of combined microencapsulation technologies should be considered promising to protect carotenoid compounds.     

氟硅协同改性丙烯酸树脂的合成与防污性能研究

以甲基丙烯酸十二氟庚酯(FMA)、甲基丙烯酸聚二甲基硅氧烷基酯(SMA)、甲基丙烯酸甲酯、丙烯酸正丁酯、甲基丙烯酸正丁酯和丙烯酸乙酯为共聚单体,通过溶液聚合反应合成出侧链含有机氟、有机硅的丙烯酸树脂.通过核磁共振氢谱(1H-NMR)、核磁共振氟谱(19F-NMR)、红外光谱(FTIR)对聚合物的结构进行了表征.通过扫描电镜(SEM)、接触角测试和生物评价等方法,探讨了FMA、SMA含量对树脂涂膜性能的影响.结果表明氟硅改性的丙烯酸树脂比单独含氟或含硅改性的丙烯酸树脂具有更低的表面能,而且氟硅改性的丙烯酸树脂涂膜比商业化的聚硅氧烷涂膜具有更好的防污性能.     

复合还原剂NaBH~4/BiCl~3对α,β-不饱和腈的选择性还原

在95%乙醇溶剂中，NaBH~4/BiCl~3能选择性还原α,β-不饱和腈，同时探讨了该反应的还原机理。     

Gas chromatographic assay for the new antitumor agent sulfamic acid diester (NSC 329680) and its stability in buffer, blood and plasma

A sensitive gas chromatographic assay with electron-capture detection has been developed for sulfamic acid diester (sulfamic acid 1,7-heptanediyl ester, NSC 329680) based on its conversion to 1,7-diiodoheptane in the presence of excess sodium iodide. The assay is linear up to 1 microgram/ml sulfamic acid diester and has a lower limit of detection of 25 ng/ml from 0.5 ml plasma. The coefficient of variation of the assay is 6.4% at 1 microgram/ml and 8.0% at 100 ng/ml. Sulfamic acid diester is relatively stable in 0.9% sodium chloride and 0.1 M sodium phosphate buffers, pH 7.0-9.0, with half-lives greater than 38 h. The major breakdown product of sulfamic acid diester is sulfamic acid 1,7-heptane-monoyl ester. When added to whole blood sulfamic acid diester shows concentration-dependent breakdown. At 50 and 100 micrograms/ml sulfamic acid diester, the half-time in whole blood is 6.9 h and 65% of the drug is sequestered by the blood cells. At 10 micrograms/ml sulfamic acid diester in blood, there is no detectable breakdown of the drug over 24 h and all of the drug is sequestered by the blood cells. Protein binding of sulfamic acid diester in human plasma is 82% at 10 micrograms/ml and 68% at 100 micrograms/ml.     

7075铝合金在电解液薄层下的电位波动

在3.5%NaCl电解液膜下,7075铝合金自腐蚀电位随浸泡时间的波动呈如下变化:浸泡初期,自腐蚀电位E波动的幅度极小,继续浸泡至4h后E急剧增大到20mV,而浸泡6h后的波动幅度与腐蚀初期相近,但出现了正向尖峰,至12h后的波动幅度又与4h的相当.实验发现自腐蚀电位的均方差随腐蚀时间呈先负移而后正移的趋势,4h时出现极小值.而电位功率谱密度线性部分的斜率(k),则在4h时呈现较小值,6h时出现最大值.由此推断7075铝合金在薄电解液膜下浸泡6h后其表面产生了稳定的蚀点.     

Liquid chromatography time-of-flight mass spectrometry following sorptive microextraction for the determination of fungicide residues in wine

This work evaluates the suitability of sorptive microextraction, using disposable silicone sorbents, and liquid chromatography time-of-flight mass spectrometry (LC-TOF-MS) for the determination of 15 fungicides in wine. Under optimized conditions, wine samples (10 mL) were diluted with the same volume of ultrapure water and poured in a glass vessel containing a magnetic stirrer and 4 g of sodium chloride. Extractions were performed at room temperature for 4 h, using an inexpensive silicone disk (12 μL volume) exposed directly to the sample. Thereafter, analytes were recovered with 0.2 mL of acetonitrile. The electrospray ionization (ESI) source was operated in the fast polarity switching mode obtaining, in the same injection, selective LC-MS records (extracted with a mass window of 10 ppm) of compounds rendering [M + H]⁺ and [M-H]⁻ ions. The method provided limits of quantification (LOQs) between 0.1 and 2.2 ng mL⁻¹, linear response ranges up to 500 ng mL⁻¹, relative recoveries from 75% to 117% and an inter-day variability below 15% for all analytes in red and white wine samples. The feasibility of in situ sample enrichment followed by delayed desorption and analysis is also assessed.     

2-吲哚酮和5-甲基-2-吲哚酮的无溶剂法制备

以苯胺和氯乙酰氯为原料在NaOH存在下酰化合成N-氯乙酰基苯胺,然后N-氯乙酰基苯胺在无水AICI,催化下环化合成2-吲哚酮．对由N-氯乙酰基苯胺合成2-吲哚酮的工艺条件进行了改进．结果表明合成2-吲哚酮的最佳条件为：反应温度为220℃,反应时间为60min,加料时温度为180℃,N-氯乙酰基苯胺与氯化钠,无水AlCl3的重量比为1：1：5．5．改进后的合成2-吲哚酮收率达到88．3％,纯度99％,收率比原工艺提高了24．6％．在此基础上,还合成了5-甲基-2-吲哚酮,并得到其最佳条件为：反应温度为190℃,反应时间为30min,加料时温度为180℃,4-甲基-N-氯乙酰基苯胺与氯化钠,无水AlCl3的重量比为1：1：5．5,收率达到83．1％,纯度为99％．