Development of Electrochemical Impedance Spectroscopy Based Malaria Aptasensor Using HRP‐II as Target Biomarker

Current demand for a stable, low cost and sensitive malaria sensor has prompted to explore novel recognition systems that can substitute widely used protein based labile biorecognition elements to be used in point of care diagnostic devices. Here, we report a novel ssDNA aptamer of 90 mer sequence developed by SELEX process against HRP‐II, a specific biomarker for Plasmodium falciparum strains. High stability of the secondary structure of the isolated aptamer was discerned from its free energy of folding of −20.40 kcal mole⁻¹. The binding constant (K_d) of the aptamer with HRP‐II analysed by isothermal titration calorimetry was ∼1.32 μM. Circular dichroism studies indicated B form of the aptamer DNA. The aptamer was chemically immobilized on a gold electrode surface through a self‐assembled monolayer of dithio‐bis(succinimidyl) propionate to produce the aptasensor. The step wise modification of the layers over the gold electrode during fabrication of the aptasensor was confirmed by cyclic voltammetry. The aptasensor was then challenged with different concentration of HRP‐II and analysed the interaction signals through electrochemical impedance spectroscopy. The impedance signal behaved reciprocally with the increasing concentrations of the target in the sample from which a dynamic range of 1 pM–500 pM (R²=0.99) and LOD of ∼3.15 pM were discerned. The applicability of the developed aptasensor to detect HRP‐II in mimicked real sample was also validated.     

Immobilization of single-stranded deoxyribonucleic acid on gold electrode with self-assembled aminoethanethiol monolayer for DNA electrochemical sensor applications

A synthesized 24-mer single-stranded deoxyribonucleic acid (ssDNA) was covalently immobilized onto a self-assembled aminoethanethiol monolayer modified gold electrode, using water-soluble 1-ethyl-3(3-dimethylaminopropyl)-carbodiimide (EDC). The covalently immobilized ssDNAs were hybridized with complementary ssDNA (cDNA) or yAL(3) gene in solution, forming double-stranded DNAs (dsDNA). Meanwhile, daunomycin as an electrochemical active intercalator in the hybridization buffer solution was intercalated into the dsDNA to form a dsDNA/daunomycin system on the gold electrode surface, which was used for DNA electrochemical sensor. The cathodic waves of daunomycin bound to the double-stranded DNA (dsDNA) by linear sweep voltammetry were utilized to detect the cDNA. The cathodic peak current (i(pc)) of duanomycin was linearly related to the concentrations of cDNA between 0.1 mug ml(-1) and 0.1 ng ml(-1). The detection limit was about 30 pg ml(-1).     

An RNA aptamer-based electrochemical biosensor for detection of theophylline in serum

An electrochemical RNA aptamer-based biosensor for rapid and label-free detection of the bronchodilator theophylline was developed. The 5'-disulfide-functionalized end of the RNA aptamer sequence was immobilized on a gold electrode, and the 3'-amino-functionalized end was conjugated with a ferrocene (Fc) redox probe. Upon binding of theophylline the aptamer switches conformation from an open unfolded state to a closed hairpin-type conformation, resulting in the increased electron-transfer efficiency between Fc and the electrode. The electrochemical response, which was measured by differential pulse voltammetry, reaches saturation within a few minutes after addition of theophylline, and the dynamic range for detecting theophylline is 0.2-10 muM. The electrode displays an inhibited response when applied directly in serum samples treated with RNase inhibitors; however a full response to the theophylline serum concentration was obtained by transferring the electrode to blank serum-free buffer solutions. It was demonstrated that theophylline is detected with high selectivity in the presence of caffeine and theobromine.     

基于铁氰化镍的非标记型核酸适配体电化学传感器检测凝血酶

在玻碳电极（GCE）表面首先用增敏作用的多壁碳纳米管(MWCNTs)夹心于两层电沉积的铁氰化镍（NiHCF）氧化还原电化学探针之间,然后以金纳米粒子为固定核酸适配体的载体,构建了检测凝血酶的非标记型核酸适配体生物传感器。 利用扫描电子显微镜(SEM)对MWCNTs和NiHCF的形貌进行了表征。 利用电化学阻抗谱对传感器的组装过程进行了监测,用循环伏安法（CV）和差分脉冲伏安法（DPV）对传感器的电化学行为进行了研究。 以铁氰化镍为探针的传感器对凝血酶的检测在1.0 ng/L~1.0 mg/L范围内呈良好的线性关系,相关系数为0.998,检测限为0.2 ng/L(S/N=3)。     

基于多边形金纳米颗粒的非标记型可卡因适体传感器的研制

实验合成了多边形金纳米颗粒,通过壳聚糖(CHIT)将合成的多边形金纳米颗粒固定在玻碳电极表面,然后通过自组装技术将带巯基的捕获DNA探针固定在修饰有多边形金纳米颗粒的电极表面,利用杂交反应使可卡因适体与DNA捕获探针结合,制成非标记型可卡因适体传感器。以六氨合钌作为电化学指示剂,通过测量传感器与目标物可卡因结合前后电流变化情况对可卡因进行测定。考察了缓冲溶液的pH、可卡因培育时间、扫描速度等对测定的影响。结果表明,在pH为7.40时该传感器的检测范围为1.0×10-10～1.0×10-3 mol/L,检测限为3.0×10-11 mol/L。该传感器制作简单,响应好,抗干扰能力强。     

Application of diazo-thiourea and gold nano-particles in the design of a highly sensitive and selective DNA biosensor

An effective procedure for constructing a DNA biosensor is developed based on covalent immobilization of NH_2 labeled,single strand DNA(NH_2-ssDNA) onto a self-assembled diazo-thiourea and gold nanoparticles modified Au electrode(diazo-thiourea/GNM/Au).Gold nano-particles expand the electrode surface area and increase the amount of immobilized thiourea and single stranded DNA(ssDNA) onto the electrode surface.Diazo-thiourea film provides a surface with high conductibility for electron transfer and a bed for the covalent coupling of NH_2-ssDNA onto the electrode surface.The immobilization and hybridization of the probe DNA on the modified electrode is studied by differential pulse voltammetry(DPV) using methylene blue(MB) as a well-known electrochemical hybridization indicator.The linear range for the determination of complementary target ssDNA is from 9.5(±0.1) × 10~(-13) mol/L to1.2(±0.2) x 10~(-9) mol/L with a detection limit of 1.2(±0.1) 10~(-13) mol/L.     

Graphene-Gold Nanoparticle-modified Electrochemical Sensor for Detection of Kanamycin Based on Target-induced Aptamer Displacement

A highly sensitive and selective label-free electrochemical sensor was developed for the determination of kanamycin. To improve the sensitivity of the electrochemical sensor, graphene-gold nanoparticles were prepared by a one-step electrochemical coreduction process and were modified on the surface of a glassy carbon electrode. The double-stranded DNA(ds-DNA) duplex probe was immobilized onto the graphene-gold nanoparticle-modified electrode. The introduction of target kanamycin induced the displacement of aptamer from the ds-DNA duplex into the solution. Methylene blue(MB) as a redox indicator monitored the current change using differential pulse voltammetry. Under optimal conditions, the designed electrochemical aptasensor exhibited a wide linear range from 0.1 pmol/L to 10 pmol/L with a detection limit of 0.03 pmol/L for kanamycin. The experimental strategy enabled the direct analysis of milk samples, and the results showed high sensitivity and good selectivity.     

Direct electrochemical detection of kanamycin based on peroxidase-like activity of gold nanoparticles

An enzyme-free, ultrasensitive electrochemical detection of kanamycin residue was achieved based on mimetic peroxidase activity of gold nanoparticles (AuNPs) and target-induced replacement of the aptamer. AuNPs which were synthesized using tyrosine as a reducing and capping agent, exhibited mimetic peroxidase activity. In the presence of kanamycin-specific aptamer, however, the single-stranded DNA (ssDNA) adsorbed on the surface of AuNPs via the interaction between the bases of ssDNA and AuNPs, and therefore blocked the catalytic site of AuNPs, and inhibited their peroxidase activity. While in the presence of target kanamycin, it bound with the adsorbed aptamer on AuNPs with high affinity, exposed the surface of AuNPs and recovered the peroxidase activity. Then AuNPs catalyzed the reaction between H₂O₂ and reduced thionine to produce oxidized thionine. The latter exhibited a distinct reduction peak on gold electrode in differential pulse voltammetry (DPV), and could be utilized to quantify the concentration of kanamycin. Under the optimized conditions, the proposed electrochemical assay showed an extremely high sensitivity towards kanamycin, with a linear relationship between the peak current and the concentration of kanamycin in the range of 0.1–60 nM, and a detection limit of 0.06 nM. Moreover, the established approach was successfully applied in the detection of kanamycin in honey samples. Therefore, the proposed electrochemical assay has great potential in the fields of food quality control and environmental monitoring.     

非标记夹心式电化学可卡因适体传感器的研究

设计一种基于双链核酸适体的非标记夹心式电化学适体传感器, 建立简单、高灵敏度的可卡因分析方法. 首先将末端巯基修饰的捕获适体探针组装在金电极表面, 构建可卡因适体传感器. 该传感器与目标分子可卡因和部分互补的检测适体探针作用后, 在电极表面形成适体/可卡因/适体复合物. 以六氨合钌为信号分子, 基于单链适体和适体/可卡因/适体复合物对六氨合钌吸附量的不同, 通过计时电量法检测电极表面吸附六氨合钌的还原电量, 进行可卡因的分析检测. 在优化的条件下, 还原电量与可卡因浓度在1～50 mmol/L范围内呈良好的线性关系, 检出限为0.1 mmol/L. 用于血清中可卡因的检测, 回收率为96.4%～104%. 该方法简单, 灵敏度高, 可作为一种通用型的适体传感器模型.     

Reagentless, reusable, ultrasensitive electrochemical molecular beacon aptasensor

A bifunctional derivative of the thrombin-binding aptamer with a redox-active Fc moiety and a thiol group at the termini of the aptamer strand was synthesized. The ferrocene-labeled aptamer thiol was self-assembled through S-Au bonding on a polycrystalline gold electrode surface and the surface was blocked with 2-mercaptoethanol to form a mixed monolayer. By use of a fluorescent molecular beacon, the effect of counterions on quadruplex formation was established. The aptamer-modified electrode was characterized electrochemically by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The modified electrode showed a voltammetric signal due to a one-step redox reaction of the surface-confined ferrocenyl moiety of the aptamer immobilized on the electrode surface in 10 mM N-(2-hydroxyethyl)piperazine-N'-2-ethanesulfonic acid (HEPES) buffer of pH 8.0. An increase in the DPV current signal was evident after blocking with 2-mercaptoethanol, effectively removing aptamer nonspecifically absorbed rather than bound to electrode surface or due to the formation of the aptamer-thrombin affinity interaction. The impedance measurement, in agreement with the differential pulse voltammetry (DPV), showed decreased Faradaic resistances in the same sequence. The "signal-on" upon thrombin association could be attributed to a change in conformation from random coil-like configuration on the probe-modified film to the quadruplex structure. The DPV of the modified electrode showed a linear response of the Fc oxidation signal to the increase in the thrombin concentration in the range between 5.0 and 35.0 nM with a linear correlation of r = 0.9988 and a detection limit of 0.5 nM. The molecular beacon aptasensor was amenable to full regeneration by simply unfolding the aptamer in 1.0 M HCl, and could be regenerated 25 times with no loss in electrochemical signal upon subsequent thrombin binding.     

Immobilization of RNase S-Peptide on a single-stranded DNA-fixed gold surface and effective masking of its surface by an acridinyl poly(ethylene glycol)

Oligonucleotide-peptide conjugate was synthesized by coupling of RNase S-peptide to a 24-mer single-stranded DNA (ssDNA) oligonucleotide to be immobilized on its complementary ssDNA oligonucleotide-fixed gold surface of sensor chip or electrode. Immobilization of on the ssDNA-fixed gold surface through DNA duplex formation was confirmed by quartz crystal microbalance (QCM) and electrochemical measurements. After treating with a synthetic acridinyl poly(ethylene glycol) (APEG), specific interaction of S-protein with the S-peptide immobilized on the gold surface was demonstrated by QCM without nonspecific adsorption of unrelated proteins such as BSA and RNase A at the surfaces. This result suggested that the acridine parts of APEG could bind to the DNA duplex on the gold surface and the poly(ethylene glycol) parts were fastened on the surface to resist the adsorption of proteins. Thus, the combination of oligonucleotide-peptide conjugate, ssDNA-fixed chip and APEG with effective masking property provides a new tool for the analysis of specific peptide-protein interactions without disturbance by other unrelated proteins.     

基于直立碳纳米管大面积金粒子的DNA生物传感器用于早幼粒白血病/维甲酸受体α融合基因检测

基于直立碳纳米管上的大面积金粒子构建了新型的电化学DNA生物传感器,用于急性早幼粒细胞白血病PML/RARα融合基因的检测。首先在直立碳纳米管电极表面溅射金粒子,采用自组装方法将巯基修饰的单链DNA固定到电极上,将氨基修饰的单链DNA和羧基化的CdTe量子点通过酰胺缩合反应生成CdTe修饰的DNA探针,通过与目标DNA的双杂交反应形成三明治结构,利用差分脉冲阳极溶出伏安法检测电极表面捕获的CdTe量子点,从而对DNA进行定量分析。结果表明,电极上Cd2+峰电流与目标DNA浓度(1.0×10-12~1.0×10-8 mol/L)的对数值呈线性关系,线性方程为ipa(μA)=1.626+0.132lgC(mol/L)(R=0.996),检出限为4.0×10-13 mol/L(3σ)。传感器表现出良好的重现性和稳定性。     

DNA修饰电极的研究: VIII. 1, 10-菲咯啉存在时钴离子在ssDNA 修饰金电极上 的电化学行为及痕量钴的检测

发现在过量1,10-菲咯啉存在时,Co^3^+^/^2^+在单链DNA(ssDNA)修饰金电极上的电化学响应显著增强。采用紫外光谱和循环伏安法考察了Co^3^+^/^2^+/1,10-菲咯啉体系与sSDNA的相互作用,并利用Co^3^+^/^2^+在1,10-菲咯啉存在时在ssDNA修饰金电极上的高灵敏电化学响应对痕量钴离子进行了测定。     

Lable‐Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified Electrode

We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10^?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Lead Sulfide Nanoparticle as Oligonucleotides Labels for Electrochemical Stripping Detection of DNA Hybridization

We report a method for the detection of DNA hybridization in connection to lead sulfide (PbS) nanoparticle tags and electrochemical stripping measurement of the lead. A kind of lead sulfide nanoparticle with free carboxyl groups on its surface was synthesized in aqueous solution. The nanoparticle was used as a marker to label a sequence‐known oligonucleotide, which was then employed as a DNA probe for identifying a target ssDNA immobilized on a PPy modified electrode based on a specific hybridization reaction. The hybridization events were monitored by the oxidation dissolution of the lead sulfide anchored on the hybrids and the indirect determination of the lead ions by anodic stripping voltammetry (ASV). The detection limit is 0.3 pmol L^?1 of target oligonucleotides. The PbS nanoparticle combining its easy conjugation to the DNA molecule with the highly sensitive stripping voltammetry detection of lead shows its promising application in the electrochemical DNA hybridization analysis assay.     

电化学石英晶体微天平实时表征和定量检测短序列DNA

利用电化学石英晶体微天平(EQCM)这一灵敏的质量和电化学传感器测定特定序列DNA。应用自组装膜技术在压电石英晶振表面自组装一带羧基的α－硫辛酸单层膜,通过盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺(EDC)及N-羟基琥珀酰亚胺(NHS)共价固化寡聚核苷酸为探针,用于测定与其碱基序列互补的DNA。实验中EQCM实时监测了α-硫辛酸的自组装过程、探针固化过程及其与cDNA杂交过程。定量得出了探针固化量及cDNA杂交量。在酸性、中性和碱性条件下,分别对固化和杂交过程进行表征,实验发现探针固化及DNA杂交都受pH影响,本文对此现象进行了解释。同时,利用染料Hoechst33258的电化学活性,使其与双链DNA嵌合,通过测量Hoechst33258的电化学信息进一步验证了DNA杂交关键步骤。     

Electrochemical DNA Hybridization Detection Using DNA Cleavage

We report the new method for detection of DNA hybridization using enzymatic cleavage. The strategy is based on that S1 nuclease is able to specifically cleave only single strand DNA, but not double strand DNA. The capture probe DNA, thiolated single strand DNA labeled with electroactive ferrocene group, was immobilized on a gold electrode. After hybridization of target DNA of complementary and noncomplementary sequences, nonhybridized single strand DNA was cleaved using S1 nuclease. The difference of enzymatic cleavage on the modified gold electrode was characterized by cyclic voltammetry and differential pulse voltammetry. We successfully applied this method to the sequence‐selective discrimination between perfectly matched and mismatched target DNA including a single‐base mismatched target DNA. Our method does not require either hybridization indicators or other exogenous signaling molecules which most of the electrochemical hybridization detection systems require.     

Label‐Free Electrochemical Aptasensor for Determination of Chloramphenicol Based on Gold Nanocubes‐Modified Screen‐Printed Gold Electrode

An ultrasensitive label‐free electrochemical aptasensor was developed for selective detection of chloramphenicol (CAP). The aptasensor was made using screen‐printed gold electrode modified with synthesized gold nanocube/cysteine. The interactions of CAP with aptamer were studied by cyclic voltammetry, square wave voltammetry (SWV) and electrochemical impedance spectroscopy. Under optimized conditions, two linear calibration curves were obtained for CAP determination using SWV technique, from 0.03 to 0.10 µM and 0.25–6.0 µM with a detection limit of 4.0 nM. The aptasensor has the advantages of good selectivity and stability and applied to the determination of CAP in human blood serum sample.     

基于纳米银与有机多孔材料/纳米金修饰的甲胎蛋白免疫传感器研究

在金电极表面电沉积银为氧化还原探针,利用有机多孔材料(PTC-NH2)、纳米金(nano-Au)固载甲胎蛋白抗体(anti-AFP),制备出用于检测甲胎蛋白(AFP)的安培型免疫传感器。通过交流阻抗技术、循环伏安法研究了电极的电化学特性,考察了孵育时间、测试液pH值等实验条件对传感器性能的影响,并利用扫描电子显微镜(SEM)对电极的修饰过程进行了表征。该传感器对AFP有良好的电流响应,线性范围分别为1.0～20.0ng/mL和20.0～60.0 ng/mL,检测限为0.6 ng/mL。     

Target induced dissociation (TID) strategy for the development of electrochemical aptamer-based biosensor

In this paper, we report a novel and more general signal-on strategy for the fabrication of electrochemical aptamer-based (E-AB) biosensor. The principle is that the interaction between the target and the aptamer strand may induce the formation and subsequent dissociation of target–aptamer complex from an electrode surface, and consequently, the remaining DNA strand on the electrode surface can hybridize again with a ssDNA containing an electrochemical probe. Differential pulse voltammetric studies have revealed that this target induced disassociation (TID) strategy is an effective signal-on method for the detection of ATP molecules with good selectivity. The TID strategy may also have several advantages, such as independence on the specific structure of either the aptamers or their complementary sequences and promotion of the generalization of E-AB sensors, the more convincible results due to the signal-on model, and the unnecessity to label the aptamers, which provides the optimized status for the reaction with the targets, etc.