Metal speciation of metallothionein in white sea catfish, Netuma barba, and pearl cichlid, Geophagus brasiliensis, by orthogonal liquid chromatography coupled to ICP-MS detection

Metal speciation analysis in MTs was carried out in two tropical fish species of Brazil, the freshwater fish pearl cichlid (Geophagus brasiliensis) and the marine fish white sea catfish (Netuma barba), that are presently used to monitor the effects of heavy metal pollution in aquatic ecosystems in Brazil. In order to obtain the MT fraction, liver cytosols from both fish species where subjected to size exclusion fractionation, monitoring on-line the metal signal (Cd, Cu and Zn) by ICP-MS while protein elution was followed by on-line UV detection. That MT fraction was then separated by anion-exchange (AE)-FPLC, whose optimal chromatographic conditions were optimized for the separation of the different hepatic MT isoforms existing in both fish species. Specific detection of separated metalloforms was carried out again by the hyphenation of the AE chromatographic system with the ICP-MS instrument. The analytical results showed that MTs of these fish species, unknown so far, exhibited unique characteristics in comparison with standard MTs and other fish liver MTs. In fact, MT isoforms of N. barba turned out to be very anionic, as indicated by their high retention in the Mono Q column and the strong ionic strength required to separate them. As for G. brasiliensis, cadmium was exclusively present in only one of the peaks of the MT isoforms showing a unique metal-binding behavior for MT in this fish species. The differences between the MTs among these species and the different association of metals in particular MT isoforms display the importance of the metal speciation analysis in these proteins prior to its use as bioindicators.     

Speciation of metallothionein-like proteins of the mussel Mytilus edulis by orthogonal separation mechanisms with inductively coupled plasma-mass spectrometry detection: effect of selenium administration

Several complementary separation mechanisms (size-exclusion chromatography, SEC; fast protein liquid chromatography, FPLC; reverse-phase chromatography, RPC) have been coupled to inductively coupled plasma mass spectrometry (ICP-MS) detection to investigate the speciation of Cd, Se, Cu and Zn in mussel hepatopancreas. SEC with double-focusing (DF) ICP-MS detection was used first for speciation analysis of those four trace elements, both in uncontaminated mussels and in mussels exposed to Cd (500 μg l⁻¹) or to Cd+Se (500 μg l⁻¹ of each element). Observed SEC results indicated that Se does not seem to significantly bind to metallothionein-like proteins (MLPs) ‘in vivo’. Total cytosolic Cd and MLPs content were lower in Cd+Se exposed mussels than those exposed to Cd only. For each treatment, 50 μl of the SEC peak fraction containing the MLPs was used to perform fast protein liquid chromatography coupled ‘on-line’ with a quadrupole (Q) ICP-MS. ⁸²Se and ¹¹⁴Cd isotopes were simultaneously monitored. Four and five Cd/MLPs isoforms were then detected in mussels exposed to only Cd and Cd+Se, respectively. In contrast, no signs of Se/MLP isoforms were found for both treatments. Subsequently, the bulk of MLPs eluting from the FPLC system were isolated and lyophilizated. A 50-μl aliquot of such reconstituted lyophilisate was then injected into a Vydac C₈ Reverse-Phase column directly connected to the Q-ICP-MS. Results confirmed the presence of one more Cd/MLP peak in those mussels exposed to Cd+Se. However, the number of Cd/MLP peaks detected decreased to three and four in only Cd and Cd+Se exposed animals, respectively. These results tend to indicate that Se, which does not trigger the biosynthesis of MLPs, could probably orient such synthesis towards the generation of a new Cd/MLP isoform in mussels submitted to both elements. The possible interrelation/complementation between Se and MLP against Cd toxicity is discussed.     

Cadmium speciation in Arabidopsis thaliana as a strategy to study metal accumulation system in plants

The strategy to identify cadmium deactivation mechanism in Arabidopsis thaliana has been developed using selective and sensitive hyphenated techniques. Cadmium concentrations, in main parts of the plant, were determined by ICP-MS and total amount was found as 0.43-0.44 μg g⁻¹ in leaves and 3.3-3.4 μg g⁻¹ in roots. Speciation of the metal complexes in cells was investigated by SEC-ICP-MS in order to estimate the accumulation process. Phytochelatins, desglycyl-phytochelatins and phytochelatins homologues lacking the N-terminal γ-linked glutamic acid were extracted from plant and were identified by RPLC-ESI-MS. Two-dimensional chromatography allowed to link the metal complexes separated by SEC with isoforms of phytochelatins analyzed by high resolution RPLC and confirm their significant responsibility for metal accumulation. The potential of the cadmium complexes speciation indicates that obtained results could be reliable source of knowledge to confirm the information coming from the well-known genomic sequence of Arabidopsis and to estimate the role of γ-glutamyl transpeptidase in metabolism of glutathione.     

Multielement trace-element speciation in metal-biomolecules by chromatography coupled with ICP-MS

The state-of-the-art of multi-element speciation in biological materials by hybrid techniques with inductively coupled plasma-mass spectrometric (ICP-MS) detection is critically reviewed with special attention to multi-metal speciation in metallothioneins (MT) and metallothionein-like proteins (MLP). The most common separation techniques used for the purpose include conventional size-exclusion chromatography (SEC) (with off-line detection) and anion-exchange (AE) or reversed-phase (RP) HPLC coupled on-line to ICP-MS. Advantages and limitations of the different commercial element-selective ICP-MS detectors, including the quadrupole (Q), double focusing (DF), and time-of-flight (TOF) mass analysers, are discussed. Procedures reported for speciation analysis, by use of hybrid techniques, for multi-metal speciation in mussel MLP and rabbit liver MT are illustrated with special emphasis on work performed in the authors' laboratory.     

Speciation of heavy metal binding non-protein thiols in Agropyron elongatum by size-exclusion HPLC-ICP-MS

An analytical approach based on the coupling of size-exclusion HPLC with ICP-MS was used for studying the speciation of heavy metal binding non-protein thiols (NPTs) in extracts of Agropyron elongatum. A non-oxidizing (N₂) preparation environment and a −85 °C preservation condition were employed to avoid the oxidation of sulfhydryl groups and corresponding decomposition of the heavy metal binding NPTs. The accumulated free heavy metal ions on the column were cleaned by a 10 mmol/l 2-mercaptoethanol eluate so as to avoid these free heavy metal ions in exchanging with the metals from NPT complexes. When these precautions were taken, the on-line size-exclusion HPLC-ICP-MS method allowed very low levels of procedural blanks for Cd, Cu and Zn, and the limits of detection were 0.4, 2.1 and 2.3 μg/l for Cd, Cu and Zn, respectively. Then, the method was applied to the study of heavy metal binding NPTs in roots of Agropyron elongatum. Results showed that the nutrient heavy metals (Cu and Zn) were bound to GSH and Cysteine both under Cd stress and in the control. Under Cd stress, phytochelatins (PCs) were induced, but, these PCs induced by Cd were not only bound to Cd, but also to Cu. Interestingly, neither GSH-Cd nor Cysteine-Cd, which was presumed to be the precursors of the PC-Cd, was detected in the extracts. This leads to the question about GSH-Cd or Cysteine-Cd as precursors of PCs, which warrants further investigation.     

Differential ESI-MS behaviour of highly similar metallothioneins

ESI-MS can only be accepted as a quantification method when using standards with a high resemblance to the analyte(s). Unfortunately, this is usually not applicable to metallothioneins (MTs), a superfamily of singular metal-binding cysteine-rich proteins, present in all living organisms, since the absence of suitable reference material due to the high diversity among metal-MT species precludes their quantification by molecular mass spectrometry. Even thus, it is widely assumed that the intensities of the ESI-MS peaks of similar species are directly correlated with their relative concentration in the sample, and this has been extended to the determination of different MT proteins coexisting in a sample.Practically all organisms contain several MT isoforms, some of them exhibiting highly similar sequences, with conserved coordinating Cys residues. For the current analysis, we used as a model system the MT isoforms of two terrestrial snails (Helix pomatia and Cornu aspersum). Hence, distinct samples were prepared by mixing, at different molar ratios, the recombinant HpCuMT and HpCdMT isoforms from H. pomatia, or the recombinant CaCuMT, CaCdMT and CaCdCuMT isoforms from C. aspersum, and they were analyzed by ESI-MS both at neutral pH (for Zn-loaded MT forms) and at acidic pH (for the corresponding apo-forms). The results here presented reveal that the ESI-MS peak intensity of a single MT species strongly depends on its sensitivity to be ionized, and thus, on the presence or absence of metal ions bound. Furthermore, our data demonstrate that very similar MT isoforms of the same organism with similar pI (ranging from 7.9 to 8.3) can show a clear different sensitivity to ES ionization, something that cannot be readily predicted only by consideration of their amino acid content. In conclusion, even in this optimum case, deductions about quantity features of MT samples drawn from ESI-MS measurements should be carefully considered.     

Determination of cadmium and lead species and phytochelatins in pea (Pisum sativum) by HPLC-ICP-MS and HPLC-ESI-MS

An analytical approach based on hyphenated techniques was used for studying the speciation of cadmium and lead in Pisum sativum. Proper preservation conditions were employed to avoid the oxidation of -SH groups and corresponding decomposition of metal-binding complexes. SEC column was washed with 5 mM beta-mercaptoethanol and then samples were analysed using ICP-MS as a detector. Results showed that cadmium is the inhibitor of lead uptake. HPLC-ESI-MSⁿ assays revealed fragmentation pathways of phytochelatins.     

Evaluation of cadmium species lability using ion-pair reversed phase HPLC coupled on-line with inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) coupled on-line with an ion-pair reversed phase HPLC (IP-RP HPLC) was developed for determining the lability of Cd species. The IP-RP HPLC-ICP-MS system measures chromatographic behaviors of Cd species in the presence of different model complexing agents (L) with stability constants (log K_CdL) from 3.8 to 19.0. Cd species with log K_CdL higher than 16, between 8 and 16, and smaller than 8 was then classified into inert, moderately labile, and labile species, respectively. The conditional stability constants and dissociation rate constants were also estimated from their corresponding chromatographic behavior. This method was applied to evaluating the lability-dependent biouptake of different Cd species in Phaeodactylum tricornutum, a typical unicellular marine diatom. IP-RP HPLC-ICP-MS is a useful and promising technique for determining the lability of noncovalent-bonded metal species (such as Cd species) in the environment and for forecasting their corresponding bioavailability especially when their speciation cannot be rigorously controlled and measured.     

Identification of a metallothionein in Synechococcus by capillary electrophoresis hyphenated with inductively coupled plasma mass spectrometry.

A home-made system hyphenating capillary electrophoresis with an inductively coupled plasma mass spectrometer (CE-ICP-MS) for cadmium speciation of protein-binding and free cadmium ions in solution is presented. The CE-ICP-MS interface consisted of an acrylic block with an internal volume ca. 20 microL in which a platinum electrode, a capillary column, and a connection to an ICP nebulizer were inserted. A make-up electrolyte solution containing 50 mmol L(-1) Tris-HCl buffer solution (pH 9.0) was continuously flowed through the interface to the ICP nebulizer. The separation of free Cd ions, Cd-cysteine, and Cd bounded to metallothionein (MT) isoforms from rabbit liver was carried out by capillary electrophoresis, and the analytes were detected by ICP-MS. The feasibility to isolate metallothionein compounds extracted from the cyanobacterium Synechococcus PCC7942 was demonstrated. The Cd binding proteins were induced in Synechococcus PCC7942 and further analyzed by CE ICP-MS.     

Speciation analysis of arsenic in Mya arenaria Linnaeus and Shrimp with capillary electrophoresis-inductively coupled plasma mass spectrometry

An improved sheath-flow interface used to couple capillary electrophoresis (CE) with inductively coupled plasma mass spectrometry (ICP-MS) and a microwave-assisted extraction used to extract each arsenic species in seafood were developed in this work. The improved sheath-flow interface completely avoids laminar flow in CE capillary caused by the suction from ICP-MS, makes electric supply more stable in CE, and transports analyte solution to ICP-MS easily and more efficiently. CE-ICP-MS coupled with our interface have two quantitative analysis modes: continuous sample-introduction mode and collective sample-introduction mode. The collective sample-introduction technique greatly reduced the dead volume of interface to approximately zero, obviously avoided the excessive dilution of analyte, and eventually led to a much lower detection limit and a much better electrophoretic resolution. This was demonstrated by the better symmetry and narrow peak widths (10-12 s) and much lower detection limits (0.030-0.042 μg/L) of four species of arsenic determined with collective sample-introduction mode.With the help of this improved sheath-flow interface and the microwave-assisted extraction, we have successfully separated and determined four arsenic species, As(III), As(V), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) in dried Mya arenaria Linnaeus and Shrimp samples using CE-ICP-MS within 10 min with a relative standard deviation of 2-4% (peak areas, n = 6) and a recovery of 96-105%.     

An investigation of bioactive phytochemicals in the leaves of Melicope vitiflora by electrospray ionisation ion trap mass spectrometry

The ethyl acetate extract of the leaves of Melicope vitiflora was separated by column chromatography and the resulting fractions tested for their bioactivity towards methicillin-resistant-Staphylococcus aureus (MRSA) and Micrococcus luteus (ML).The bioactive column chromatography fractions were further separated by preparative TLC and dereplication was carried out on them by first subjecting them to electrospray ionisation-ion trap mass spectrometry (ESI-MSⁿ). The resulting molecular masses, their fragmentation patterns in addition to the chemnet database (www.chemnetbase.com) were used to aid in the structural elucidation of some of the compounds by permitting comparison with known structures of natural origin. Some molecular masses and the corresponding fragmentations were found that did not correlate with any known compounds thus revealing potentially novel natural products that could be investigated on a larger scale and could ultimately find application as new drugs against MRSA and other multi drug resistant microorganisms. Structures are also proposed for known compounds that have not been previously reported for M. vitiflora.     

Evaluation of an in vitro method to estimate trace elements bioavailability in edible seaweeds

Raw edible seaweed harvested in the Galician coast (Northwestern Spain), including two red seaweed types (Dulse and Nori), three brown seaweed (Kombu, Wakame and Sea Spaghetti), one green seaweed (Sea Lettuce) and one microalgae (Spirulina platensis) were studied to assess trace elements bioavailability using an in vitro method (simulated gastric and intestinal digestion/dialysis). Similarly, a cooked seaweed sample (canned in brine) consisting of a mixture of two brown seaweed (Sea Spaghetti and Furbelows) and a derived product (Agar-Agar) from the red seaweed Gelidiumm sesquipedale, were also included in the study. The total trace element content as well as the non-dialyzable fractions was carried out after a microwave acid digestion of the seaweed samples by inductively coupled plasma-mass spectrometry (ICP-MS). The dialyzable fraction was determined without any pre-treatment by ICP-MS.PIPES buffer solution at a pH of 7.0 and dialysis membranes of 10 kDa molecular weight cut off (MWCO) were used for intestinal digestion. Accuracy of the method was assessed by analyzing a NIES-09 certified reference material (Sargasso seaweed). The accuracy of the in vitro procedure was established by a mass balance study which led to good accuracy of the whole in vitro process, after statistical evaluation (95% confidence interval). The highest dialyzability percentages (100 ± 0.2%) were obtained for Dulse in Mn and V.     

Fractionation metallothionein-like proteins in mussels with on line metal detection by high performance liquid chromatography-inductively coupled plasma-optical emission spectrometry

A rapid method for the determination of Al, Ba, Cu, Fe, Mn, Sr and Zn binding metallothionein-like proteins (MLPs) in mussels (Mytilus galloprovincialis) by inductively coupled plasma-optical emission spectrometry was developed. The method uses a short column (8 mm × 75 mm) anion exchange high performance liquid chromatography (HPLC) with inductively coupled plasma-optical emission spectrometric (ICP-OES) detection. Working in isocratic mode (75 mM Tris-HCl at pH 7.4, flow rate at 0.8 ml min⁻¹), two major MLPs isoforms (MLP-1 and MLP-2) can be separated in ten minutes. The distribution of basal metals binding MLPs was assessed by on line HPLC and ICP-OES, while the basal contents of metals binding MLPs were obtained after off line HPLC and ICP-OES (collection of the two major fractions and multi-element determination by ICP-OES). The calculated LODs were 81, 6, 10, 13, 30, 9 and 123 ng g⁻¹ for Al, Ba, Cu, Fe, Mn, Sr and Zn binding MLP-1 and MLP-2, respectively. The repeatability of the over-all method (five different mussel cytosols prepared from the same mussel sample and subjected to the off line HPLC-ICP-OES procedure twice) was from 11.2 for Cu to 16.2% for Zn. The method was finally applied to different raft mussels from Ría de Arousa estuary in order to know basal levels of elements binding MLPs.     

Fourier transform infrared spectroscopy and solid-state nuclear magnetic resonance studies of octadecyl modified metal oxides obtained from different silane precursors

Octadecyl (C₁₈) modified metal oxide substrates, including titania, zirconia, hafnia, and alumina, are prepared using two types of silylating reagents, n-octadecyltrihydridosilane and n-octadecyltrichlorosilane. Fourier transform infrared (FTIR) and solid-state ²⁹Si nuclear magnetic resonance (NMR) measurements are performed to examine the cross-linking of the silanes. Solid-state ¹³C NMR spectroscopy provides information about the conformation and mobility of surface-immobilized alkyl chains. Variable temperature FTIR investigations are carried out to study the influence of the organosilane precursors and metal oxides on the conformational order of the alkyl modified systems. It is found that grafting by means of n-octadecyltrichlorosilane yields higher grafting densities than surface modification with n-octadecyltrihydridosilane. Combined pyridine adsorption and diffuse reflectance infrared Fourier transform (DRIFT) measurements are performed on the titania and hafnia substrates to evaluate potential surface heterogeneities, i.e. Lewis and Brønsted sites. Differences in the alkyl chain conformational order within the series of C₁₈ modified metal oxides are explained by the presence of island structures. The reduced C₁₈ conformational order for the samples grafted with n-octadecyltrihydridosilane is traced back to the lower grafting density which in turn points to a lower reactivity of this silylating reagent. The most striking result is the higher conformational order of the C₁₈ chains grafted in the present surface modified metal oxides when compared with silica-based systems. This finding is attributed to the lower porosity of the metal oxide supports along with more closely packed chains on the surface.     

Comparative study of biosurfactant produced by microorganisms isolated from formation water of petroleum reservoir

Biosurfactant produced by Pseudomonas aeruginosa, Bacillus subtilis and Rhodococcus erythropolis that isolated from the formation water of Chinese petroleum reservoir has been compared in surface abilities and oil recovery. Maximum biosurfactant production reached to about 2.66 g/l and the surface tension of liquid decreased from 71.2 to 22.56 mN/m using P. aeruginosa. Three strains exhibited a good ability to emulsify the crude oil, and biosurfactant of P. aeruginosa attained an emulsion index of 80% for crude oil which was greater than other strains. Stability studies were carried out under the extreme environmental conditions, such as high temperature, pH, salinity and metal ions. Results showed an excellent resistance of all biosurfactants to retain their surface-active properties at extreme conditions. It was found that the biosurfactants from three isolated bacteria showed a good stability above pH of 5, but at lower pH (from 1 to 5) they will harmfully be affected. They were able to support the condition up to 20 g/l salinity. P. aeruginosa biosurfactant was even stable at the higher salinity. Regarding temperature, all produced biosurfactants demonstrated a good stability in the temperature up to 120 °C. But stability of three biosurfactants was affected by monovalent and trivalent ions. Oil recovery experiments in physical simulation showed 7.2-14.3% recovery of residual oil after water flooding when the biosurfactant of three strains was added. These results suggest that biosurfactants of these indigenous isolated strains are appropriate candidates for enhanced oil recovery with a preference to biosurfactant of P. aeruginosa.     

Conformational analysis of bridgehead-substituted bicyclo[m.m.m]alkanes and bicyclo[8.8.n]alkanes

Conformational analyses of bicyclo[m.m.m]alkanes where m=1-10 and of bicyclo[8.8.n]alkanes where n=1-7 bearing methyl groups on the bridgeheads were carried out using a Monte Carlo search strategy. In the bicyclo[m.m.m]alkane series, greater variability was observed for the inter-bridgehead distance for larger values of m. This suggests that properly substituted bicyclo[8.8.8]hexacosanes or larger ring systems might serve as molecular springs.     

Determination of ferrous and ferric iron in aqueous biological solutions

A solvent extraction method was employed to determine ferrous and ferric iron in aqueous samples. Fe³⁺ is selectively extracted into the organic phase (n-heptane) using HDEHP (bis(2-ethylhexyl) hydrogen phosphate) and is then stripped using a strong acid. After separation, both oxidation states and the total iron content were determined directly by ICP-MS analysis. This extraction method was refined to allow determination of both iron oxidation states in the presence of strong complexing ligands, such as citrate, NTA and EDTA. The accuracy of the method was verified by crosschecking using a refinement of the ferrozine assay. Presented results demonstrate the ability of the extraction method to work in a microbiological system in the presence of strong chelating agents following the bioreduction of Fe³⁺ by the Shewanella alga BrY. Based on the results we report, a robust approach was defined to separately analyze Fe³⁺ and Fe²⁺ under a wide range of potential scenarios in subsurface environments where radionuclide/metal contamination may coexist with strongly complexing organic contaminants.     

Solvent extraction and self-assembly of nanosized aggregates of p-tert-butyl thiacalix[4]arenes tetrasubstituted at the lower rim by tertiary amide groups and monocharged metal cations in the organic phase

New p-tert-butyl thiacalix[4]arenes functionalized with morpholide and pyrrolidide groups at the lower rim in cone, partial cone, and 1,3-alternate conformations were synthesized, and their receptor properties for monocharged cations (alkali metal and silver ions) were studied using the picrate extraction method and dynamic light scattering (DLS). To evaluate the ability of the p-tert-butyl thiacalix[4]arene derivatives to recognize metal ions, liquid-liquid extraction of their picrate salts has been carried out in a mutually saturated water-dichloromethane system. The degrees of extraction and the extraction constants for monocharged metal cations (Li⁺, Na⁺, K⁺, Cs⁺) have been determined. The ability of the systems, consisting of host and guest molecules, to self-assembly was proved by DLS using a Zetasizer Nano ZS particle size analyzer. It was shown that all the investigated thiacalix[4]arenes are able to form nanoscale particles with silver cations under the experimental conditions. The pyrrolidide derivative in the cone conformation showed both self-association and aggregation processes with lithium cations. The degree of extraction for all the investigated systems that formed nanoscale aggregates in the organic phase was more than 67% and the extraction constants, log K_ex determined by the picrate extraction method, more than 6.     

Solid phase microextraction/gas chromatography/mass spectrometry integrated with chemometrics for detection of Salmonella typhimurium contamination in a packaged fresh vegetable

A rapid method for detection of Salmonella typhimurium contamination in packaged alfalfa sprouts using solid phase microextraction/gas chromatography/mass spectrometry (SPME/GC/MS) integrated with chemometrics was investigated. Alfalfa sprouts were inoculated with S. typhimurium, packed into commercial LDPE bags and stored at 10 + 2 °C for 0, 1, 2 and 3 days. Uninoculated sprouts were used as control samples. A SPME device was used to collect the volatiles from the headspace above the samples and the volatiles were identified using GC/MS. Chemometric techniques including linear discriminant analysis (LDA) and artificial neural network (ANN) were used as data processing tools. Numbers of Salmonella were followed using a colony counting method. From LDA, it was able to differentiate control samples from sprouts contaminated with S. typhimurium. The potential to predict the number of contaminated S. typhimurium from the SPME/GC/MS data was investigated using multilayer perceptron (MLP) neural network with back propagation training. The MLP comprised an input layer, one hidden layer, and an output layer, with a hyperbolic tangent sigmoidal transfer function in the hidden layer and a linear transfer function in the output layer. The MLP neural network with a back propagation algorithm could predict number of S. typhimurium in unknown samples using the volatile fingerprints. Good prediction was found as measured by a regression coefficient (R² = 0.99) between actual and predicted data.     

A practical synthesis of N-tosylimines of arylaldehydes

Synthesis of N-tosylimines of arylaldehydes was carried out by the reaction of arylaldehydes and p-toluenesulfonamide in methylene chloride in the presence of trifluoroacetic anhydride as a dehydrating agent.