Total-reflection X-ray fluorescence: An alternative tool for the analysis of magnetic ferrofluids

This work presents the first application of the total-reflection X-ray fluorescence (TXRF) to the compositional study of magnetic ferrofluids. With the aims of validating the best analytical conditions and also, limitations of the TXRF in the compositional study of these materials, an alternative empirical method, based in the use of angle-dependence TXRF (AD-TXRF) measurements, is proposed. Three kinds of ferromagnetic nanoparticles, with different morphologies, have been studied. The techniques of inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES) have been used to validate the TXRF results. In contrast with the plasma techniques, the developed TXRF procedure need not of previous chemical acid digestion. Additionally, two procedures of magnetic nanoparticles synthesis, co-precipitation and laser-pyrolysis, have been checked for the contaminants trace metals Zn, Mn and Cr. It has been found that the method of laser-pyrolysis produces nanoparticles of higher purity.     

Multielement analysis of biological reference materials by total-reflection X-ray fluorescence and inductively coupled plasma mass spectrometry in the semiquant mode

Summary Total-reflection X-ray fluorescence (TXRF) and inductively coupled plasma mass spectrometry (ICP-MS) were used for the analysis of two biological reference materials. The quantifications were carried out after addition of one single standard element which serves as an internal standard in both cases. The results of TXRF analysis were good to satisfactory. The method is therefore suitable for fast multielement analysis, because it needs no special calibration specimens. The results of ICP-MS analysis are at least in the order of magnitude of the certified values. In some cases recoveries fit very well. For quantitative analysis, however, the use of the standard addition method or the calibration with external standards is required.     

Supercritical fluid extraction of nylon 6,6 oligomers and their characterization via liquid chromatography coupled with mass spectrometry.

This research extends previous studies regarding the application of supercritical fluid extraction (SFE) for the analysis of oligomers from nylon 6,6 fibers. The effects of CO2 pressure, extraction temperature, CO2-modifier percentage, static extraction time and dynamic extraction time on the SFE efficiency of nylon 6,6 oligomers were examined. Results from the SFE methods for oligomer extractions were compared to results from conventional solvent extraction. The extracted oligomers were identified by high-performance liquid chromatography (HPLC) with coupled on-line atmospheric pressure chemical ionization mass spectrometry and HPLC fractionation coupled with off-line liquid secondary ion mass spectrometry.     

On-line microdialysis of proteins with high-salt buffers for direct coupling of electrospray ionization mass spectrometry and liquid chromatography

Mass spectrometry (MS) is one of the most powerful instrumental techniques for protein analysis. The electrospray ionization (ESI) approach is known to be very gentle and at the same time compatible with liquid separation techniques such as HPLC and CE. However, ESI is known to be susceptible to salts and impurities, which often cause a dramatic decrease in sensitivity due to the suppression of the ionization of the product of interest. For this reason, LC-ESI-MS coupling has so far been largely limited to reversed-phase chromatography with its hydro-organic mobile phases. Other chromatographic techniques are typically "linked" to ESI-MS by time consuming, off-line desalting steps. On-line microdialysis has been proposed as a solution to this dilemma. In this paper, we introduce an improved microdialysis system, which enlarges the number of putative applications, thus allowing chromatographic separations of biological compounds to be directly coupled to MS detection with little to no loss in time or chromatographic resolution. Examples include separations by affinity, ion-exchange and size-exclusion chromatography, all of which were connected successfully to the ESI-MS detector via the on-line microdialyzer. We propose that, using this system, any kind of chromatography technique can be coupled to ESI-MS, thus enabling for example application in quality control or process monitoring of many bioproduction and downstream processes.     

Calibration of reference materials for total-reflection X-ray fluorescence analysis by heavy ion backscattering spectrometry

Total-reflection X-ray fluorescence (TXRF) is widely used for the control of metallic contamination caused by surface preparation processes and silicon materials. At least three companies supply a variety of TXRF systems to the silicon integrated circuit (IC) community, and local calibration of these systems is required for their day to day operation. Differences in local calibration methods have become an issue in the exchange of information between IC manufacturers' different FABs (Fabrication Facility) and also between silicon suppliers and IC FABs. The question arises whether a universal set of fluorescence yield curves can be used by these different systems to scale system sensitivity from a single element calibration for calculation of elemental concentrations. This is emphasized by the variety of experimental conditions that are reported for TXRF data (e.g. different angles of incidence for the same X-ray source, different X-ray sources, etc.). It appears that an instrumental factor is required. We believe that heavy ion backscattering spectrometry (HIBS) provides a fundamental method of calibrating TXRF reference materials, and can be used in calculating this instrumental factor. In this paper we briefly describe the HIBS system at the Sandia National Laboratories HIBS User Facility and its application to the calibration of TXRF reference materials. We will compare HIBS and TXRF mapping capabilities and discuss the issues associated with the restrictions of some older TXRF sample stages. We will also discuss Motorola's cross-calibration of several TXRF systems using different elements as references.     

Inorganic trace analysis by mass spectrometry

Mass spectrometric methods for the trace analysis of inorganic materials with their ability to provide a very sensitive multielemental analysis have been established for the determination of trace and ultratrace elements in high-purity materials (metals, semiconductors and insulators), in different technical samples (e.g. alloys, pure chemicals, ceramics, thin films, ion-implanted semiconductors), in environmental samples (waters, soils, biological and medical materials) and geological samples. Whereas such techniques as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), glow discharge mass spectrometry (GDMS), secondary ion mass spectrometry (SIMS) and inductively coupled plasma mass spectrometry (ICP-MS) have multielemental capability, other methods such as thermal ionization mass spectrometry (TIMS), accelerator mass spectrometry (AMS) and resonance ionization mass spectrometry (RIMS) have been used for sensitive mono- or oligoelemental ultratrace analysis (and precise determination of isotopic ratios) in solid samples. The limits of detection for chemical elements using these mass spectrometric techniques are in the low ng g⁻¹ concentration range. The quantification of the analytical results of mass spectrometric methods is sometimes difficult due to a lack of matrix-fitted multielement standard reference materials (SRMs) for many solid samples. Therefore, owing to the simple quantification procedure of the aqueous solution, inductively coupled plasma mass spectrometry (ICP-MS) is being increasingly used for the characterization of solid samples after sample dissolution. ICP-MS is often combined with special sample introduction equipment (e.g. flow injection, hydride generation, high performance liquid chromatography (HPLC) or electrothermal vaporization) or an off-line matrix separation and enrichment of trace impurities (especially for characterization of high-purity materials and environmental samples) is used in order to improve the detection limits of trace elements. Furthermore, the determination of chemical elements in the trace and ultratrace concentration range is often difficult and can be disturbed through mass interferences of analyte ions by molecular ions at the same nominal mass. By applying double-focusing sector field mass spectrometry at the required mass resolution—by the mass spectrometric separation of molecular ions from the analyte ions—it is often possible to overcome these interference problems. Commercial instrumental equipment, the capability (detection limits, accuracy, precision) and the analytical application fields of mass spectrometric methods for the determination of trace and ultratrace elements and for surface analysis are discussed.     

Development of an analytical system for the simultaneous determination of anabolic macrocyclic lactones in aquatic environmental samples

An analytical procedure that enables routine analysis for trace determination of six anabolic macrocyclic lactones (zearalenone, alpha- and beta-zearalenol, zearalanone, zeranol, and taleranol) in sewage treatment plant (STP) samples has been developed. The method uses solid-phase extraction, followed by high-performance liquid chromatography with on-line tandem mass spectrometry using atmospheric pressure chemical ionization (LC/APCI-MS/MS). The extraction of these compounds from filtered water samples was performed off-line with C(18) solid-phase cartridges. The detection was achieved by isocratic reversed-phase high-performance liquid chromatography coupled with an heated nebulizer (HN) APCI interface operating in negative ion mode. Mean recovery of the analytes in STP effluent samples generally exceeded 81%. This method was used to determine the occurrence of target analytes in the aquatic environment. In the selected STP effluent samples, zearalenone and alpha-zearalenol were detected in the ng/L range.     

Potential of Total Reflection and Grazing Incidence XRF for Contamination and Process Control in Semiconductor Fabrication

 The actual detection limits of total reflection X-ray fluorescence (TXRF) are determined and compared to those of destructive physical analytical methods like secondary ion mass spectrometry (SIMS) and chemical methods like vapour phase decomposition in combination with inductively coupled plasma-mass spectrometry (VPD-ICP-MS). The elements Ca, Ti, Cr, Fe, Cu were analyzed on a Si wafer with 10 nm thermal oxide using TXRF and VPD-ICP-MS. The deviation of the TXRF and the VPD-ICP-MS results is less than 30%. The thickness, composition and density of a Co/Ti two-layer stack were determined using angle dependent total reflection and grazing incidence X-ray fluorescence (A-TXRF). The obtained data were compared with X-ray reflectometry (XRR) and energy filtered transmission electron microscopy (EFTEM). The agreement between TEM and A-TXRF is excellent for the determination of the thickness of the metal layers. From these results we conclude, that A-TXRF permits the accurate determination of composition, thickness and density of thin metallic layers. The results are discussed regarding detection efficiency, acquisition time, accuracy and reproducibility.     

Multidimensional nano-HPLC for analysis of protein complexes

The analysis of macromolecular protein complexes is an important factor in understanding most cellular processes, e.g., protein transport into cell organells, signal transduction via biological membranes, apoptosis, energy metabolism, directed motion of cells, and cell division. These complexes are not only built of various numbers of different proteins but also of prosthetic groups and RNA molecules. To understand the role each protein plays in a complex, a complete analysis of all protein compounds is necessary. Therefore, several separation steps have to be coupled to mass spectrometry to identify the proteins. In this work, we describe the application of multidimensional liquid chromatography, SCX-RP-LC as well as SAX-RP-LC, coupled to electrospray ion trap mass spectrometry. Tryptic digested ribosomes were separated by ion exchange chromatography manually collected and prepared for reversed phase chromatography to analyze the peptides via nano-ESI mass spectrometry. The total numbers of identified proteins are compared in consideration of the separation method (SCX-RP versus SAX-RP).     

Application of vapor phase decomposition/total reflection X-ray fluorescence in the silicon semiconductor manufacturing environment

Total reflection X-ray fluorescence (TXRF), in combination with vapor phase decomposition (VPD), provides an efficient method for analyzing trace metal contaminants on silicon wafer surfaces. The progress made in applying these techniques to the analysis of silicon wafers in a wafer fabrication cleanroom environment is reported. Methods of standardization are presented, including the preparation and characterization of VPD standards. While the VPD wafer preparation process increases the sensitivity of the TXRF measurement by at least one order of magnitude, inherent uncertainties associated with the VPD technique itself are apparent. Correlation studies between VPD/TXRF and VPD/inductively coupled plasma mass spectrometry (ICP-MS) are presented.     

Metabolite analysis,isolation and purity assessment using various liquid chromatographic techniques combined with radioactivity detection

During the discovery of metabolic routes of a drug candidate, radioactively labeled substances are administered. This study reports the multidimensional application of overpressured layer chromatography (OPLC) and high-performance liquid chromatography (HPLC) coupled with online or off-line nondestructive radioactivity detection methods in metabolism studies. Among these methods, digital autoradiography and flow-cell radioactivity detectors (RD) using solid scintillators are used. In this study, the hyphenation of OPLC with RD is reported. The application of the OPLC-RD technique is demonstrated on a metabolism study as well as the multidimensional chromatographic selectivity using normal-phase OPLC for the separation in the first dimension, followed by reversed-phase HPLC-RD, which provides additional selectivity to the separation. Information regarding the identity of radiolabeled metabolites and data obtained from spectroscopic methods could be advantageously used during structure elucidation.     

毛细液相/超高效液相与静电场轨道高分辨质谱联用分析平台的建立及维护

利用外部触发装置实现了毛细液相和超高效液相与静电场轨道阱高分辨质谱(LTQ-Orbitrap XL)的交互联用,建立了全方位的液相色谱-质谱联用分析以及液相色谱多级串联质谱联用分析平台.通过平台的应用大大提高了大型仪器的使用效率,促进了公共仪器平台的科研服务能力.     

The offline combination of thin-layer chromatography and high-performance liquid chromatography with diode array detection and micrOTOF-Q mass spectrometry for the separation and identification of spinochromes from sea urchin (Strongylocentrotus droebachiensis) shells

Thin-layer chromatography (TLC) with off-line high-performance liquid chromatography coupled to diode array detection and micrOTOF-Q mass spectrometry (HPLC-DAD-MS) resulted in the successful fractionation, separation and identification of spinochrome pigments from sea urchin (Strongylocentrotus droebachiensis) shells. Two fractions of pigments were separated by TLC and eluted with methanol using a TLC-MS interface. HPLC-DAD-MS analysis of the fractions indicated the presence of six sea urchin pigments: spinochrome monomers B and D, three spinochrome dimers (anhydroethylidene-6,6'-bis(2,3,7-trihydroxynaphthazarin) and its isomer and ethylidene-6,6'-bis(2,3,7-trihydroxynaphthazarin)), and one pigment that was preliminary identified as a spinochrome dimer with the structural formula C(22)H(16)O(16).     

Application of ETV-ICPMS in semiconductor process control

Submicron semiconductor manufacturing requires ultra-clean processes and materials to achieve high product yields. It is demonstrated that electrothermal evaporation (ETV) in a graphite furnace coupled with ICPMS offers a new possibility for a fast simultaneous analysis of eight elements with detection limits below 0.2 ng/g in conc. hydrofluoric acid and buffered oxide etch (ammonium fluoride/hydrogen fluoride mixture). ETV-ICPMS also comprises significant improvements in the analysis of metal contamination on silicon wafer surfaces with respect to currently used methods. The contaminants on the surface are usually analyzed by total reflexion X-ray fluorescence spectrometry (TXRF) or dissolved by HF vapour (vapour phase decomposition; VPD) or a mixture of hydrofluoric acid and hydrogen peroxide (droplet surface etching, DSE) and analyzed by GFAA or TXRF. ETV-ICPMS combines the advantages of both analytical methods: the multielemental advantage of TXRF and the possibility to analyze light elements like Al, Mg, Na which may not be analyzed by TXRF. With VPD/DSE-ETV-ICPMS detection limits between 0.2 and 2×10⁹ atoms cm^?2 on a 6″ wafer have been achieved in a simultaneous analysis of eight elements. The main advantage of ETV-ICPMS versus conventional ICPMS in both applications — chemical and surface analysis — is its capability to analyze Fe in the sub-ng/g range. As Fe is one of the most important impurities in semiconductor manufacturing ETV-ICPMS is much more useful for semiconductor applications than low-resolution ICPMS. For the present application potassium iodide was used as a modifier. It enhances the sensitivity by a factor of 3–4 and improves the reproducibility significantly.     

Microwave plasma torch analytical atomic spectrometry

The microwave plasma torch (MPT), as a relative new source, has found extensive use in atomic spectrometry. In this review, the fundamental features and characteristics of the MPT are summarized and compared with other kinds of analytical atomic sources, such as the more popularly used inductively coupled plasma (ICP), the direct current plasma (DCP), as well as other kinds of microwave plasmas (MWPs). Since the MPT offers some attractive features, it has been used as an excitation source for atomic emission spectrometry (MPT-AES), including the atomic emission detection (AED) for gas chromatography (GC), liquid chromatography (LC) and supercritical fluid chromatography (SFC). Also, it has been used either as an ionization source for atomic mass spectrometry (MPT-AMS) or an atomization source for atomic fluorescence spectrometry (MPT-AFS). The historical development and recent improvements in these MPT atomic spectrometric techniques are evaluated with emphasis on the analytical advantages and limitations. In addition, the future research directions and the application prospects of MPT atomic spectrometry (MPT-AS) are discussed.     

Application of total-reflection X-ray fluorescence spectrometry and high-performance liquid chromatography for the chemical characterization of xylem saps of nickel contaminated cucumber plants

Total-reflection X-ray fluorescence (TXRF) spectrometry, reversed-phase (RP) and size–exclusion (SE) high-performance liquid chromatography (HPLC) methods were applied for the characterization of low-volume xylem sap of control and nickel contaminated cucumber plants growing in hydroponics containing urea as the sole nitrogen source. In these saps collected for 1 h, Ca, K, Fe, Mn, Ni, Zn, as well as malic, citric and fumaric acids were determined. The SEC measurements showed that macromolecules were not detectable in the samples. Nickel contamination had minimum impact on the organic acid transport, however, the transport of Zn, K and Fe was reduced by 50, 22 and 11%, respectively. This observation supports the results of our earlier experiments when nitrate ions were used as the sole nitrogen form. At the same time, the fresh root weight and the volume of the collected xylem sap increased by 36 and 85%, respectively. Therefore, nickel addition seemed to decrease the urea toxicity of the plants. By pooling the eluting fractions of the SEC column, which were 10-fold concentrated by freeze-drying, the series of the resulted samples were analyzed by the TXRF spectrometry and RP-HPLC. The three organic acids could be identified in only one of the fractions, which contained Fe and, in the case of the contaminated plants, Ni in detectable concentration. However, considerable parts of these two elements and Mn, as well as practically the total amounts of Cu may be transported by unidentified organic compounds in the xylem.     

一种新型超临界流体萃取-高效液相色谱在线联用系统的构建

天然产物研究一直是植物学、化学和药学的重要研究领域．通过从天然产物中寻找生物活性成分和先导物是创制新药的有效途径之一．有效成分的提取是天然产物研究中最基本和最关键的环节．超临界流体萃取（Supercritical fluid extraction,简称SFE）是近年来发展较快的一种新型样品提取技术．超临界CO2作为最常用的萃取剂已被用于天然药物中非极性和弱极性有效成分的提取,尤其是挥发性和热敏性的物质．此外,通过加入适当的添加剂还可有效地萃取极性化合物,和传统的化学方法相比,     

Modeling of separations by closed-loop steady-state recycling chromatography of a racemic pharmaceutical intermediate

The following review describes the development of mass spectrometry off-line and on-line coupled with liquid chromatography to the analysis of food proteins. It includes the significant results recently obtained in the field of milk, egg and cereal proteins. This paper also outlines the research carried out in the area of food protein hydrolysates, which are important components in foodstuffs due to their functional properties. Liquid chromatography and mass spectrometry have been particularly used for the characterization of food peptides and especially in dairy products.     

Analytical techniques in the study of highly-nitrated nitrocellulose

This work presents an updated overview of the analytical techniques used to study highly-nitrated nitrocellulose, which is used in explosives and is of forensic interest. Most articles published in the past decade were designed:(1) to investigate polymeric parameters of nitrocellulose (e.g., molar mass distribution, viscosity and specific refractive index) by size-exclusion chromatography;(2) to determine the morphological and thermal characteristics of nitrocellulose using thermal and spectroscopic techniques; and,(3) to study the thermal, biological and mechanical degradation of nitrocellulose by thermal, spectroscopic, and mass spectrometric (MS) techniques, alone or coupled to gas chromatography.However, the few papers that focused on the determination of nitrocellulose used in explosives employed analytical techniques [e.g., vibrational techniques (infrared and Raman spectroscopy), MS and ion-mobility spectrometry (IMS) and liquid chromatography (LC) (high-performance LC and ion chromatography)]. Most of the information reported by these techniques has been qualitative. Only quantitative determination of nitrocellulose or its nitrogen content has been performed by measuring the nitrite and/or nitrate ions released from its basic hydrolysis.     

Microfluidics with MALDI analysis for proteomics—A review

Various microfluidic devices have been developed for proteomic analyses and many of these have been designed specifically for mass spectrometry detection. In this review, we present an overview of chip fabrication, microfluidic components, and the interfacing of these devices to matrix-assisted laser desorption ionization (MALDI) mass spectrometry. These devices can be directly coupled to the mass spectrometer for on-line analysis in real-time, or samples can be analyzed on-chip or deposited onto targets for off-line readout. Several approaches for combining microfluidic devices with analytical functions such as sample cleanup, digestion, and separations with MALDI mass spectrometry are discussed.