Preparation for nitrocellulose membrane-poly (vinyl alcohol)-ionic imprinting and its application to determine trace copper by room temperature phosphorimetry

Nitrocellulose membrane-poly (vinyl alcohol)-ionic imprinting (NCM-PVA-I-I) was prepared using Cu²⁺ as template. The cavity in NCM-PVA-I-I matched Cu²⁺ very well and the selectivity was high. Cu²⁺ entered the cavity and then could form ionic association ([Cu²⁺]·[(Fin⁻)₂]) with the anion of fluorescein (Fin⁻) outside the cavity by electrostatic effect. [Cu²⁺]·[(Fin⁻)₂] could emit strong and stable room temperature phosphorescence on NCM-PVA-I-I. Its ΔI_p was proportional to the content of Cu²⁺. Based on the above facts, a new method for the determination of trace copper by solid substrate-room temperature phosphorimetry (NCM-PVA-I-I-SS-RTP, SS-RTP is the abbreviation of solid substrate-room temperature phosphorimetry) using NCM-PVA-I-I technique has been established. The linear range of this method was 2.00-144.00 fg Cu²⁺ spot⁻¹ (sample volume: 0.40 μL spot⁻¹, corresponding concentration: 5.00-360.00 pg mL⁻¹), and the detection limit calculated by 3Sb/k was 0.43 fg Cu²⁺ spot⁻¹ (corresponding concentration: 1.1 × 10⁻¹² g mL⁻¹, n = 11). Samples containing 2.00 and 144.00 fg Cu²⁺spot⁻¹ were measured, respectively, for seven times and R.S.D.s were 3.5% and 4.7%. NCM-PVA-I-I-SS-RTP could combine very well the characteristics of both the high sensitivity of SS-RTP and the high match and selectivity of NCM-PVA-I-I, and it was rapid, accurate, sensitive and with good repeatability. It has been successfully applied to determine trace copper in human hair and tea samples.     

Determination of trace mercury by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose (Pb(CMC)(2)) particles containing luminescent salicyl fluorones molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)₂), which contains salicyl fluorones (THBF), Pb(CMC)₂-THBF, were synthesized by sol-gel method. Pb(CMC)₂-THBF can emit intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. EDTA can chelate the Pb²⁺ in Pb(CMC)₂-THBF, causing it decompose into aqueous soluble components PbY²⁻, CMC⁻ and THBF, and these components can react with Hg²⁺ to form (CMC)₂Hg-THBF, causing decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace mercury by SS-RTP quenching method was established. The linear range of this method is 2.0-40.0 fg spot⁻¹ (5.0-100.0 pg ml⁻¹) of Hg²⁺, with a detection limit (LD) of 0.26 fg spot⁻¹, and the regression equation of working curve is (fg spot⁻¹, 0.4 μl spot⁻¹), r = 0.9994. This method has been applied to the determination of trace mercury in water sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

8-Quinolineboronic acid as a potential phosphorescent molecular switch for the determination of alpha-fetoprotein variant for the prediction of primary hepatocellular carcinoma

8-Quinolineboronic acid phosphorescent molecular switch (8-QBA-PMS) in the “off” state emitted weak room temperature phosphorescence (RTP) of 8-QBA on the acetylcellulose membrane (ACM) with the perturbation of Pb²⁺. When 8-QBA-PMS was used to label concanavalin agglutinin (Con A) to form 8-QBA-PMS-Con A based on the reaction between -OH of 8-QBA-PMS and -COOH of Con A, 8-QBA-PMS turned “on” automatically due to its structure change, and RTP of the system increased 2.7 times. Besides, -NH₂ of 8-QBA-PMS-Con A could carry out affinity adsorption (AA) reaction with the -COOH of alpha-fetoprotein variant (AFP-V) to form the product Con A-AFP-V-Con A-8-QBA-PMS containing -NH-CO- bond, causing the RTP of the system to further increase. Moreover, the amount of AFP-V was linear to the ΔI_p of the system in the range of 0.012-2.40 (fg spot⁻¹). Thus, a new affinity sensitive adsorption solid substrate room temperature phosphorimetry using 8-QBA-PMS as labelling reagent (8-QBA-PMS-AASSRTP) for the determination of AFP-V was proposed with the detection limit (LD) of 9 × 10⁻¹⁵ g mL⁻¹. It had been used to determine AFP-V in human serum with the results agreeing with enzyme-link immunoassay (ELISA), showing promise for the prediction of PHC due to the intimate association between AFP-V and primary hepatocellular carcinoma (PHC). The mechanism of the promethod was also discussed.     

A dual-wavelength resonance light scattering ratiometry of biopolymer by its electrostatic interaction with surfactant

A dual-wavelength resonance lighting scattering (DW-RLS) ratiometry is developed to detect anion biopolymer based on their bindings with cation surfactant. Using the interaction of Hyamine 1622 (HM) with fish sperm DNA (fsDNA) as an example, a dual-wavelength resonance light scattering (DW-RLS) ratiometric method of DNA was constructed. In Britton-Robinson buffer controlled medium, fish sperm DNA (fsDNA) could interact with Hyamine 1622 (HM), displaying significantly enhanced RLS signals. By measuring the RLS signals characterized at 300.0 nm (I_300.0) and the RLS intensity ratio (I_276.0/I_294.0), respectively, fsDNA over a wide dynamic range of content could be detected. Typically, when HM concentration is kept at 6.0 × 10⁻⁵ mol l⁻¹, using I_300.0 could detect fsDNA over the range of 50-2000 ng ml⁻¹ with the limit of 3.0 ng ml⁻¹, while using I_276.0/I_294.0 could detect fsDNA over the range of 0.5-2500 ng ml⁻¹ with the limit of 0.05 ng ml⁻¹. Thus the latter so-called DW-RLS ratiometry is obviously superior to the former one. Based on the measurements of I_300.0 and I_276.0/I_294.0 data, a Scatchard plot concerning the interaction between HM and fsDNA could be constructed and thus the binding number (n) and binding constant (K) could be available with the values of 13.5 and 1.35 × 10⁵ mol⁻¹ l, and 11.9 and 1.65 × 10⁵ mol⁻¹ l, respectively.     

Determination of trace alpha-fetoprotein variant by affinity adsorption solid substrate-room temperature phosphorimetry and its application to the forecast of human diseases

In the presence of ion perturber LiAc, 4-generation polyamidoamine dendrimers (4G-D) could emit strong and stable room temperature phosphorescence (RTP) signal at on nitrocellulose membrane (NCM), and Triton X-100 could sharply enhance the RTP signal of 4G-D. Triton X-100-4G-D was used to label concanavalin agglutinin (Con A) to get the labeling product Triton X-100-4G-D-Con A. Quantitative specific affinity adsorption (AA) reaction between Triton X-100-4G-D-Con A and α-fetoprotein variant (AFP-V) could be carried out on the surface of NCM, whose product Triton X-100-4G-D-Con A-AFP-V could emit strong and stable RTP and its ΔI_p was proportional to the content of AFP-V. According to the facts above, a new affinity adsorption solid substrate-room temperature phosphorimetry (AA-SS-RTP) for the determination of trace AFP-V by Con A labeled with Triton X-100-4G-D was established. Detection limits of this method were 0.23 fg spot⁻¹ (direct method, corresponding concentration: 5.8 × 10⁻¹³ g mL⁻¹) and 0.13 fg spot⁻¹ (sandwich method, corresponding concentration: 3.2 × 10⁻¹³ g mL⁻¹). It has been successfully applied to determine the content of AFP-V in human serum and forecast human diseases, for its high sensitivity, long RTP lifetime, good repeatability, high accuracy and little background perturbation with at the long wavelength area. Meanwhile, the mechanism for the determination of trace AFP-V using AA-SS-RTP was also discussed.     

A new resonance scattering spectral method for the determination of trace amounts of iodate with rhodamine 6G

Under the conditions of 0.04 mol L⁻¹ HCl-8.0 × 10⁻⁴ mol L⁻¹ KI, there is a fluorescence peak at 540 nm and a synchronous fluorescence peak at 540 nm for rhodamine 6G (RhG). When there is IO₃⁻, it reacts with exceed I⁻ to form I₃⁻. And I₃⁻ and RhG combine into ion association particles. The particles exhibit three resonance scattering peaks at 320, 400 and 595 nm. And there is fluorescence quenching at 540 nm. Iodine concentration is proportional to the intensity of the resonance scattering intensity at 400 nm in the range of 1.0-20 × 10⁻⁷ mol L⁻¹. And a new resonance scattering spectral (RSS) method has been described for the determination of IO₃⁻ in salt samples. The spectral results have been verified that the formation of (RhG-I₃)_n association particles and solid-liquid interfaces are the main factor that cause the fluorescence quenching and resonance scattering effects.     

Multi-pumping flow system for the determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples

A multi-pumping flow system (MPFS) for the spectrophotometric determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples is proposed. The determination of orthophosphate is based on the vanadomolybdate method. In-line ultraviolet photo-oxidation is employed to mineralise organic phosphorus to orthophosphate prior to detection. A solenoid valve allows the deviation of the flow towards the UV-lamp to carry out the determination of organic phosphorus.Calibration was found to be linear up to 20 mg P L⁻¹, with a detection limit (3s_b/S) of 0.08 mg P L⁻¹, an injection throughput of 75 injections h⁻¹ and a repeatability (R.S.D.) of 0.6% for the direct determination of orthophosphate. On the other hand, calibration graphs were linear up to 40 mg P L⁻¹, with a detection limit (3s_b/S) of 0.5 mg P L⁻¹, an injection throughput of 11 injections h⁻¹ and a repeatability (R.S.D.) inferior to 2.3% for the procedures involving UV photo-oxidation.     

Monoclonal antibody based electrochemical immunosensor for the determination of ochratoxin A in wheat

Competitive electrochemical enzyme-linked immunosorbent assays based on disposable screen-printed electrodes have been developed for quantitative determination of ochratoxin A (OTA). The assays were carried out using monoclonal antibodies in the direct and indirect format. OTA working range, I₅₀ and detection limits were 0.05-2.5 and 0.1-7.5 μg L⁻¹, 0.35 (±0.04) μg L⁻¹ and 0.9 (±0.1) μg L⁻¹, 60 and 100 μg L⁻¹ in the direct and indirect assay format, respectively. The immunosensor in the direct format was selected for the determination of OTA in wheat. Samples were extracted with aqueous acetonitrile and the extract analyzed directly by the assay without clean-up. The I₅₀ in real samples was 0.2 μg L⁻¹ corresponding to 1.6 μg/kg in the wheat sample with a detection limit of 0.4 μg/kg (calculated as blank signal −3σ). Within- and between-assay variability were less than 5 and 10%, respectively. A good correlation (r = 0.9992) was found by comparative analysis of naturally contaminated wheat samples using this assay and an HPLC/immunoaffinity clean-up method based on the AOAC Official Method 2000.03 for the determination of OTA in barley.     

A highly sensitive coupling technique for the determination of trace quercetin based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting

Al³⁺ could react with quercetin (Q) to form [AlQ]³⁺ complex which could be used as a template for the preparation of poly (vinyl alcohol)–[AlQ]³⁺ complex imprinting (PVA-C-I). The [AlQ]³⁺ not only had good matching ability and selectivity with the cavity of PVA-C-I, but also could react with the fluorescein isothiocyanate anion (FITC⁻) on the outside of cavity by electrostatic interaction to form ion-association complex [AlQ]³⁺·[(FITC)⁻]₃. The ion-association complex could emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM) and the ΔI_p of the system had linear relationship with the content of Q, showing the highly selective identification of PVA-C-I to Q. Thus, a new coupling technique for the determination of trace Q based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting (PVA-C-I-SSRTP) was established. The linear range and limit of detection (LOD) of this method were 0.010–2.0 (×10⁻¹² g mL⁻¹) and 2.0 × 10⁻¹⁴ g mL⁻¹, respectively, showing wide linear range and high sensitivity of PVA-C-I-SSRTP. This method was used to determine the content of Q in waste water, and the results are consistent with those by spectrofluorimetry. Meanwhile, the mechanism for the determination of Q using PVA-C-I-SSRTP was also discussed.     

Effects of interaction of folic acid with uranium (VI) and basic triphenylmethane dyes on resonance Rayleigh scattering spectra and their analytical applications

In pH 4.2-4.8 HAc-NaAc buffer solution, folic acid (FA) could react with uranium (VI) to form a 2:1 anionic chelate which further reacted with some basic triphenylmethane dyes (BTPMD) such as Ethyl Violet (EV), Methyl Violet (MV) and Crystal Violet (CV) to form 1:2 ion-association complexes. As a result, not only the absorption spectra were changed, but also the intensities of resonance Rayleigh scattering (RRS) were enhanced greatly and the new RRS spectra were observed. The maximum RRS wavelengths were located at 328 nm for EV system, 325 nm for MV system and 328 nm for CV system. The fading degree (ΔA) and RRS intensities (ΔI) of three systems were different. Under given conditions, the ΔA and ΔI were all directly proportional to the concentration of FA. The linear ranges and the detection limits of RRS methods were 0.0039-5.0 μg mL⁻¹ and 1.2 ng mL⁻¹ for EV system, 0.0073-4.0 μg mL⁻¹ and 2.2 ng mL⁻¹ for MV system, 0.014-3.5 μg mL⁻¹ and 4.7 ng mL⁻¹ for CV system. The RRS methods exhibited higher sensitivity, so they are more suitable for the determination of trace FA. The optimum conditions, the influencing factors and the effects of coexisting substances on the reaction were investigated. The method can be applied to the determination of FA in serum and urine samples with satisfactory results. The structure of the ternary ion-association complex and the reaction mechanism were discussed in this work.     

Syntheses and investigation of the effects of position and nature of substituent on the spectral,electrochemical and spectroelectrochemical properties of new cobalt phthalocyanine complexes

The syntheses of new cobalt phthalocyanine (CoPc) complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral (complex 3b) positions, and with benzylmercapto at the non-peripheral position (complex 5), are reported. The effects of the nature and position of substituent on the spectral, electrochemical and spectroelectrochemical properties of these complexes are investigated. Solution electrochemistry of complex 3a showed three distinctly resolved redox processes attributed to Co^IIIPc⁻²/Co^IIPc⁻² (E_½ = +0.64 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.24 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.26 V versus Ag|AgCl) species. No ring oxidation was observed in complex 3a. Complex 3b showed both ring-based oxidation, attributed to Co^IIIPc⁻¹/Co^IIIPc⁻² species (E_p = +0.86 V versus Ag|AgCl), and ring-based reduction associated with Co^IPc⁻²/Co^IPc⁻³ species (E_½ = −1.46 V versus Ag|AgCl), with the normal metal-based redox processes in CoPc complexes: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.41 V versus Ag|AgCl) and Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.38 V versus Ag|AgCl). Solution electrochemistry of complex 5 showed the same type and number of species observed in complex 3a: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.59 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.26 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.39 V versus Ag|AgCl) species. These processes were confirmed using spectroelectrochemistry.     

Fluorimetric determination of phytic acid in urine based on replacement reaction

A sensitive fluorimetric method for determination of phytic acid in human urine samples was described. The method was based on a fluorimetric replacement reaction, in which the added phytic acid replaced the Cu²⁺ ion from Cu²⁺-gelatin complex, liberating the fluorescent gelatin molecule. The fluorescence of the solution was accordingly recovered proportionally to the amount of the foreign phytic acid. The excitation wavelength was 273.5 nm and the characteristic emission wavelength was 305.0 nm, respectively. The calibration graph was obtained by plotting the recovered fluorescent intensity at maximum 305.0 nm against the added standard phytic acid, and was divided into two sections. One section was linear over the range of 0.40-2.40 mg L⁻¹ with a linear regression equation of I_f = −0.895 + 15.146c (R² > 0.9993), and the other over the range of 2.40-9.20 mg L⁻¹ with a linear regression equation of I_f = −29.526 + 26.113c (R² > 0.9996), respectively. The relative standard deviation (R.S.D.) at 95% confidence degree for a 2.0 mg L⁻¹ of standard phytic acid within 1 month was less than 1.26% (n = 5), indicating the procedure is reproducible. The detection and the quantification limits of phytic acid were estimated to be 0.23 and 0.40 mg L⁻¹, respectively. The proposed method was applied to the determination of phytic acid in urine samples and the found concentrations of phytic acid in urine were in the range of 0.49-0.75 mg L⁻¹ with recoveries of 96.2-108.8%. Comparison of the obtained results with the reported HPLC was performed, indicating the proposed method was reliable.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Flow injection determination of anisidine value in palm oil samples using a triiodide potentiometric detector

A flow injection analysis (FIA) procedure for the determination of anisidine value (AV) in palm olein using a triiodide detector is described. Undiluted oil sample and chloramine-T reagent were added to a reaction chamber, and reaction was accelerated by applying a short vortex action (typically for 30 s). After allowing the emulsified oil phase to be separated from the aqueous phase (bottom layer), an aliquot of the aqueous phase (containing unreacted chloramine-T) was aspirated into a carrier stream that contained I⁻ where the chloramine-T oxidized the I⁻ to form I₃⁻ which was finally detected by a flow-through triiodide potentiometric detector. Variables that affect the FIA signals such as size of the reaction chamber, oil and reagent flow rates, chloramine-T concentration, vortex time, time for phase separation, carrier stream pH and injected volume were studied. The optimized FIA procedure is linear over 1.0-23.0 AV. The method exhibits good repeatabililty (R.S.D. of ±3.16% (n = 4) for the determination of 5.0 AV) and a sampling rate of 40 samples per hour was achieved. Good correlation (r² = 0.996 (n = 4)) between the proposed method and the manual American Oil Chemists’ Society procedure was found when applied to the determination of twenty different types of palm olein samples.     

Determination of clenbuterol by capillary electrophoresis immunoassay with chemiluminescence detection

A competitive immunoassay for clenbuterol (CLB) based on capillary electrophoresis with chemiluminescence (CL) detection was established. The method was based on the competitive reaction of horseradish peroxidase (HRP)-labeled CLB (CLB-HRP) and free CLB with anti-CLB antiserum. The factors affecting the electrophoresis and CL detection were systematically investigated with HRP as a model sample. Under the optimal conditions, the tracer CLB-HRP and the immunoassay complex were separated, and the linear range and the detection limit (S/N = 3) for CLB were 5.0-40 nmol l⁻¹ and 1.2 nmol l⁻¹, respectively. The proposed method has been applied satisfactorily in the analysis of urine sample.     

Backscattering light detection of nucleic acids with tetraphenylporphyrin-Al(III)-nucleic acids at liquid/liquid interface

A backscattering light (BSL) detection assembly is constructed and applied to the determination of nucleic acids with high sensitivity and selectivity based on the measurements of BSL signals at water/tetrachloromethane (H₂O/CCl₄) interface. In aqueous medium of pH 3, the binary complex of of Al(III)-DNAs could be formed by the interaction of Al(III) with the phosphate group of DNAs, which then could interact with tetraphenylporphyrin (TPP) in tetrachloromethane through liquid/liquid interaction, forming a ternary complex of TPP-Al(III)-DNAs at the interface. It was observed that greatly enhanced BSL signals occurred with maximum peak at 469 nm when the ternary complex of TPP-Al(III)-DNAs were absorbed to the liquid/liquid interface. The enhanced backscattering light intensity (I_BSL) is in proportion to the concentration of calf thymus DNA (ctDNA) and fish sperm DNA (fsDNA) in the range of 0.6-1200 ng ml⁻¹ and 1.1-1200 ng ml⁻¹, respectively. The limits of determination (3σ) are 60 pg ml⁻¹ and 110 pg ml⁻¹, correspondingly. Artificial samples with highly interference backgrounds were determined with the recovery ranging from 94.5 to 106.7%, and relative standard deviation (R.S.D.) less than 2.40%.     

Silver nanoplates-based colorimetric iodide recognition and sensing using sodium thiosulfate as a sensitizer

A colorimetric method for the recognition and sensing of iodide ions (I⁻) has been developed by utilizing the reactions between triangular silver nanoplates (TAg-NPs) and I⁻ in the presence of sodium thiosulfate (Na₂S₂O₃). Specifically, I⁻ together with Na₂S₂O₃ can induce protection of TAg-NPs owing to the formation of insoluble AgI, as confirmed by the high-resolution transmission electron microscopy (HRTEM). In the absence of Na₂S₂O₃, the etching reactions on TAg-NPs were observed not only by I⁻ but also other halides ions. The Na₂S₂O₃ plays as a sensitizer in this system, which improved the selectivity and sensitivity. The desired colorimetric detection can be achieved by measuring the change of the absorption peak wavelength corresponding to localized surface plasmon resonance (LSPR) with UV–vis spectrophotometer or recognized by naked eye observation. The results show that the shift of the maximum absorption wavelength (Δλ) of the TAg-NPs/Na₂S₂O₃/I⁻ mixture was proportional to the concentration of I⁻ in the range 1.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹. Moreover, no other ions besides I⁻ can induce an eye discernible color change as low as 1.0 × 10⁻⁷ mol L⁻¹. Finally, this method was successfully applied for I⁻ determination in kelp samples.     

Flow-through optosensing of 1-naphthaleneacetic acid in water and apples by heavy atom induced-room temperature phosphorescence measurements

A sensitive and selective phosphorimetric method for the determination of 1-naphthaleneacetic acid (1-NAA) based on a flow-injection system connected to a flow cell packed with a solid support and placed in the sample compartment of a conventional luminescence spectrometer is described. A non-ionic solid polymeric resin Amberlite XAD-7 is used for the packing. After injection of the sample, 1-NAA is on-line retained in the packed resin and measurements of the heavy atom induced (HAI)-room temperature phosphorescence (RTP) emission (λ_ex/λ_em = 292/490 nm) from this native luminescent compound are taken.The optimum experimental conditions were investigated by injecting 2 ml samples of an aqueous solution of 1-NAA in the flow system. A concentration 0.15 mol l⁻¹ of thallium(I) ions, as heavy atom, both in the samples and the carrier flow, was finally selected. Also, a concentration of 6 mmol l⁻¹ of sulphite was optimal for ensuring the necessary deoxygenation of the system at the selected flow rate of 0.8 ml min⁻¹. After measurement, the solid support was efficiently regenerated by injecting 1 ml of a mixture water:acetone in a ratio 1:1 (v/v) into the flow.The detection limit (3σ criterion) was 1.2 ng ml⁻¹ of 1-NAA. The repeatability (R.S.D.) for five replicates of a sample containing 50 ng ml⁻¹ of analyte turned out to be ±3% and the calibration graphs proved to be linear up to 500 ng ml⁻¹ of 1-NAA (maximum concentration assayed). The effect of potential interferences from other organic species which can be also used as plant growth regulators, as well as from various inorganic cations and anions, has been investigated as well.The method was successfully applied to the determination of low levels of this plant growth regulator in natural waters (river and fountain waters) and apples.     

Determination of naproxen with solid substrate room temperature phosphorimetry based on an orthogonal array design

A solid substrate room temperature phosphorimetric method (SSRTP) for the determination of naproxen in pharmaceutical products was developed. The experimental conditions were optimized by a L₂₅ (5⁶) orthogonal array design (OAD) with five factors at five levels using statistical analysis. The five factors contained pH value of the sample solution, drying time (t_d) and drying temperature (T_d) of solid substrate paper in the oven, concentration (c_I⁻) of heavy atom (I⁻), and exposure time (t_e) of solid substrate paper after being dried. The pH value, t_d, c_I⁻ and t_e had significant influences on the measurement of phosphorescence intensity. The optimization for sample preparation improved greatly the analytical performance of SSRTP. Under the optimal conditions, naproxen can be determined in a linear range from 10 to 400 ng ml⁻¹ with a detection limit of 2.7 ng ml⁻¹ at 3σ. The method has been applied satisfactorily to the determination of naproxen in a commercial product.