Photochemical preparation of pyrimidin-2(1H)-ones by rhenium(I) complexes with visible light

With visible light irradiation (λ > 400 nm) of rhenium(I) complexes (P1-P4), a photochemical conversion from 3,4-dihydropyrimidin-2(1H)-ones to pyrimidin-2(1H)-ones at room temperature has been achieved with good to excellent yields in CH(3)CN-H(2)O solution containing CCl(4) and K(2)CO(3). Luminescence quenching study and product analysis reveal that photoinduced electron transfer between rhenium(I) complex P and 3,4-dihydropyrimidin-2(1H)-ones plays an important role in the initial event.     

Synthesis of ruthenium(II) complexes containing hydroxymethylphosphines and their catalytic activities for hydrogenation of supercritical carbon dioxide

Ligand substitution of RuCl2[P(C6H5)3]3 and Cp*RuCl(isoprene) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl) complexes with hydroxymethylphosphines was investigated to develop new catalyst systems for CO2 hydrogenation. A reaction of P(C6H5)2CH2OH with RuCl2[P(C6H5)3]3 in CH2Cl2 gave Ru(H)Cl(CO)[P(C6H5)2CH2OH]3 (1), which was characterized by NMR spectroscopy and X-ray crystallographic analysis. An isotope labeling experiment using P(C6H5)213CH2OH indicated that the carbonyl moiety in complex 1 originated from formaldehyde formed by degradation of the hydroxymethylphosphine. Elimination of formaldehyde from PCy2CH2OH (Cy=cyclohexyl) was also promoted by treatment of RuCl2[P(C6H5)3]3 in ethanol to give RuCl2(PHCy2)4 under mild conditions. On the other hand, the substitution reaction using Cp*RuCl(isoprene) with the hydroxymethylphosphine ligands proceeded smoothly with formation of Cp*RuCl(L)2 [2a-2c; L=P(C6H5)2CH2OH, PCy(CH2OH)2, and P(CH2OH)3] in good yields. The isolable hydroxymethylphosphine complexes 1 and 2 efficiently catalyzed the hydrogenative amidation of supercritical carbon dioxide (scCO2) to N,N-dimethylformamide (DMF).     

有效合成5—硝基呋喃烯衍生物

报道了一种有效合成５－硝基呋喃烯衍生物的方法。在常温、弱碱Ｋ２ＣＯ３存在下（ｔｒａｃｅＨ２Ｏ），５－硝基呋喃亚甲基溴化钾盐与芳醛反应，高产率、高立体选择性地得到５－硝基呋喃烯衍生物。     

Efficient RuIII-catalyzed synthesis of 9-aryl-9H-xanthene-3,6-diols as precursors to fluorones

Efficient condensation of resorcinol and various aromatic aldehydes in the presence of RuCl₃nH₂O as a homogeneous catalyst under reflux conditions was investigated.It was found that a very simple method afforded good to excellent yields of the desired products.     

BiBr3-initiated tandem addition/silyl-Prins reactions to 2,6-disubstituted dihydropyrans

A tandem addition/silyl-Prins reaction efficiently affords cis-2,6-disubstituted dihydropyrans (DHPs) using 5 mol % of BiBr3 in CH2Cl2. The reaction occurs between delta-triethylsilyloxyvinyltrimethylsilanes and a variety of aldehydes to give good to excellent isolated yields of DHPs. The diastereoselectivities in the crude products are significantly affected by aldehyde substitution with electron-rich aldehydes, providing 2-3:1 (cis:trans) and neutral (or electron-poor) aldehydes affording dr > or = 19:1 (cis:trans).     

The in situ generation of Ph3P=C(CF3)2. a facile one pot conversion of aldehydes to bis-trifluoromethyl olefins.

The in situ reaction of triphenylphosphine with tetrakis(trifluoromethyl)-1,3-dithietane in the presence of aliphatic or aromatic aldehydes gives good to excellent yields of bis-trifluoromethyl olefins.     

Highly efficient solid-phase oxidative cleavage of olefins by OsO4-NalO4 in the intramolecular N-acyliminium Pictet-Spengler reaction

[reaction: see text] In the present investigation, solid-supported peptide olefins were converted quantitatively to aldehydes via the OsO(4)-NaIO(4)-mediated oxidative cleavage reaction. Addition of DABCO was essential to efficiently suppress the formation of hydroxymethyl ketone side products. The generated aldehydes were used in intramolecular N-acyliminium Pictet-Spengler reactions to produce highly pure pyrroloisoquinoline derivatives. The methodology was extended to allylglycine derivatives to enable the incorporation of pyrroloisoquinoline scaffolds within peptides.     

Angular ligand constraint yields an improved olefin aziridination catalyst

[reaction: see text] The use of a pyridinophane, a macrocycle composed of three pyridines linked, via all ortho positions through CH(2) or CH(2)CH(2) groups, bound to copper, gives good performance (rate and yield) catalyzing the conversion of substituted aliphatic olefins and PhINTs to aziridines. Advantages also derive from using CH(2)Cl(2) solvent and the weakly coordinating anions BAr(4)(-) (Ar = C(6)H(5) or 3,5-C(6)H(3)(CF(3))(2)). Reactions are complete in minutes at 20 degrees C, and yields are almost quantitative for olefins not bearing secondary allylic CH bonds; however, cis-cyclooctene gives only the aziridine despite the allylic hydrogens.     

Cross metathesis on olefin-terminated monolayers on Si(111) using the Grubbs' catalyst

This paper reports the functionalization and patterning of olefin-terminated monolayers on Si(111) through cross metathesis. A simple, one-step synthesis of a diolefin--CH2=CH(CH2)9O(CH2)9CH=CH2--was developed from commercially available starting materials. Mixed partially olefin-terminated monolayers of this novel diolefin and 1-octadecene on hydrogen-terminated Si(111) were obtained. The olefins are raised above the rest of the monolayer and thus sterically accessible for further functionalization. Olefin-terminated monolayers were reacted with the Grubbs' first generation catalyst and olefins in solution that were terminated with fluorines, carboxylic acids, alcohols, aldehydes, and alkyl bromides. Characterization of these monolayers using X-ray photoelectron spectroscopy and horizontal attenuated total reflection infrared spectroscopy demonstrated that olefins on the surface had reacted via cross metathesis to expose fluorines, carboxylic acids, aldehydes, alcohols, and bromides. Through calibration experiments, we demonstrated a simple 1:1 correspondence between the ratio of olefins in solution used in the assembly and the final composition of the mixed monolayers. Finally, these monolayers on silicon were patterned on the micrometer-size scale by soft lithography using microfluidic channels patterned into poly(dimethylsiloxane) (PDMS) stamps. Micrometer-wide lines of polymer brushes were synthesized on these monolayers and characterized by scanning electron microscopy. In addition, olefin-terminated monolayers were patterned into micrometer-sized lines exposing carboxylic acids by cross metathesis with olefins in solution. This method of patterning is broadly applicable and can find applications in a variety of fields including the development of biosensors and nanoelectronics.     

Substituted tertiary phosphine Ru(II) organometallics: catalytic utility on the hydrolysis of etofibrate in pharmaceuticals

Some new organometallics of ruthenium(II) of the type [RuCl(2)(COD)(CO)L] (1a-f) and [RuCl(2)(COD)L(2)] (2a-f) (where L is substituted tertiary phosphines), have been synthesized by using precursors [RuCl(2)(COD)(CO)(CH(3)CN)] (1) and [RuCl(2)(COD)(CH(3)CN)(2)] (2) with the substituted tertiary phosphine ligands in 1:1 and 1:2 molar ratio. The organometallics (2a-f) have been further reacted with carbonmonoxide to produce compounds of the type [RuCl(2)(CO)L(2)] (3a-f). These compounds were characterized by elemental analysis, IR, NMR ((1)H, (13)C and (31)P), mass and electronic spectral data. The catalytic activity of all these organometallics were studied and found that they are efficient catalysts for hydrolysis of etofibrate. The hydrolyzed product was separated by column chromatography and the percent yields are found in the range of 98.6-99.1%.     

Improved procedure for the oxidative cleavage of olefins by OsO4-NaIO4

[reaction: see text] Oxidative cleavage of olefins by OsO(4)-NaIO(4) sometimes suffers from low yields due to the formation of side products. It is found that the addition of 2,6-lutidine can suppress the side reactions and dramatically improve the yield of this classic reaction.     

Thermodynamics of rhodium hydride reactions with CO, aldehydes, and olefins in water: organo-rhodium porphyrin bond dissociation free energies

Tetra(p-sulfonato-phenyl) porphyrin rhodium hydride ([(TSPP)Rh-D(D2O)](-4)) (1) reacts in water (D2O) with carbon monoxide, aldehydes, and olefins to produce metallo formyl, alpha-hydroxyalkyl, and alkyl complexes, respectively. The hydride complex (1) functions as a weak acid in D2O and partially dissociates into a rhodium(I) complex ([(TSPP)Rh(I)(D2O)](-5)) and a proton (D+). Fast substrate reactions of 1 in D2O compared to reactions of rhodium porphyrin hydride ((por)Rh-H) in benzene are ascribed to aqueous media promoting formation of ions and supporting ionic reaction pathways. The regioselectivity for addition of 1 to olefins is predominantly anti-Markovnikov in acidic D2O and exclusively anti-Markovnikov in basic D2O. The range of accessible equilibrium thermodynamic measurements for rhodium hydride substrate reactions is substantially increased in water compared to that in organic media through exploiting the hydrogen ion dependence for the equilibrium distribution of species in aqueous media. Thermodynamic measurements are reported for reactions of a rhodium porphyrin hydride in water with each of the substrates, including CO, H2CO, CH3CHO, CH2=CH2, and sets of aldehydes and olefins. Reactions of rhodium porphyrin hydrides with CO and aldehydes have nearly equal free-energy changes in water and benzene, but alkene reactions that form hydrophobic alkyl groups are substantially less favorable in water than in benzene. Bond dissociation free energies in water are derived from thermodynamic results for (TSPP)Rh-organo complexes in aqueous solution for Rh-CDO, Rh-CH(R)OD, and Rh-CH2CH(D)R units and are compared with related values determined in benzene.     

RuCl₃·3H₂O catalyzed reactions: facile synthesis of bis(indolyl)methanes under mild conditions

RuCl?·3H?O was found to be an effective catalyst for reactions of indoles, 2-methylthiophene, and 2-methylfuran with aldehydes to afford the corresponding bis(indolyl)methanes, bis(thienyl)methanes, and bis(fur-2-yl)methanes in moderate to excellent yields. Experimental results indicated that mono(indolyl)methanol is not the reaction intermediate under these reaction conditions.     

A BODIPY derivative as a highly selective "Off-On" fluorescent chemosensor for hydrogen sulfate anion

A new fluorescent receptor for anions has been synthesized by the combination of BODIPY dye and indole moiety. The binding and sensing abilities of receptor toward various anions have been studied by absorption, emission and (1)H NMR titrations spectroscopies. Receptor could act as a highly selective "Off-On" fluorescent sensor for hydrogen sulfate anion in CH(3)CN solvent and CH(3)CN-H(2)O medium. The fluorescence response of receptor toward HSO(4)(-) in CH(3)CN solvent could be due to the suppressed PET (photo-induced electron transfer) process induced by the multiple hydrogen bonding interactions between receptor and HSO(4)(-). In CH(3)CN-H(2)O medium, the HSO(4)(-)-induced change is mainly the consequence of a simple protonation of the CH[double bond, length as m-dash]N- moiety of receptor , which inhibited the PET process and "turned on" the fluorescence of .     

A simple, iron-catalyzed, pyridine-assisted hydrogen peroxide epoxidation system

A simple and inexpensive system comprised of H(2)O(2)-pyridine-FeCl(3)·6H(2)O for the catalysis of olefin epoxidation was established. Intriguingly, the reactivity of this system greatly depends on the amounts of pyridine. Various substrates, including aromatic and aliphatic olefins, were epoxidized by this simple system in moderate to excellent yields.     

Kinetics and Mechanism of the Epoxidation of Alkyl-Substituted Alkenes by Hydrogen Peroxide, Catalyzed by Methylrhenium Trioxide

Epoxidations of alkyl-substituted alkenes, with hydrogen peroxide as the oxygen source, are catalyzed by CH(3)ReO(3) (MTO). The kinetics of 28 such reactions were studied in 1:1 CH(3)CN-H(2)O at pH 1 and in methanol. To accommodate the different requirements of these reactions, (1)H-NMR, spectrophotometric, and thermometric techniques were used to acquire kinetic data. High concentrations of hydrogen peroxide were used, so that diperoxorhenium complex CH(3)Re(O)(eta(2)-O(2))(2)(H(2)O), B, was the only predominant and reactive form of the catalyst. The reactions between B and the alkenes are about 1 order of magnitude more rapid in the semiaqueous solvent than in methanol. The various trends in reactivity are medium-independent. The rate constants for B with the aliphatic alkenes correlate closely with the number of alkyl groups on the olefinic carbons. The reactions become markedly slower when electron-attracting groups, such as halo, hydroxy, cyano, and carbonyl, are present. The rate constants for catalytic epoxidations with B and those reported for the stoichiometric reactions of dimethyldioxirane show very similar trends in reactivity. These findings suggest a concerted mechanism in which the electron-rich double bond of the alkene attacks a peroxidic oxygen of B. These data, combined with those reported for the epoxidation of styrene (a term intended to include related molecules with ring and/or aliphatic substituents) by B and by the monoperoxo derivative of MTO, suggest that all of the rhenium-catalyzed epoxidations occur by a common mechanism. The geometry of the system at the transition state can be inferred from these data, which suggest a spiro arrangement.     

Ph3P/CF3CCl3作为一个新的羰基烯烃化试剂的研究—一锅法合成烯烃RCH=CClCF3

Ph3P/CF3CCl3与醛在室温下一锅反应生成三氟甲基取代的烯烃RCH=CClCF3(3). 芳香醛及α,β-不饱和醛的反应显示高度立体选择性, 给出Z式异构体. 而饱和脂肪醛的反应立体选择性较低, Z与E式异构体的比例为2:1至3:1. 反应可能是经由叶立德Ph3P-CClCF3的Wittig型反应. 本工作表明, Ph3P/CF3CCl3可以作为在十分温和的条件下向有机分子中引入=CClCF3结构单元的方便试剂.     

Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.     

Glycerin and CeCl3·7H2O: a new and efficient recyclable medium for the synthesis of bis(indolyl)methanes

Glycerin and CeCl₃·7H₂O were successfully used in recyclable catalytic system for the synthesis of several bis(indolyl)methanes in good to excellent yields through the reaction of indoles with aldehydes. The method is applicable to aliphatic and aromatic aldehydes, and the mixture of glycerin and CeCl₃·7H₂O can be reused up to five times without special treatment and with comparable yields.     

Sterically congested adamantylnaphthalene quinone methides

Five new (2-adamantyl)naphthol derivatives (5-9, quinone methide precursors, QMP) were synthesized and their photochemical reactivity was investigated by preparative photolyses, fluorescence spectroscopy, and laser flash photolysis (LFP). Excitation of QMP 5 to S(1) leads to efficient excited state intramolecular proton transfer (ESIPT) coupled with dehydration, giving quinone methide QM5 which was characterized by LFP (in CH(3)CN-H(2)O, λ(max) = 370 nm, τ = 0.19 ms). On irradiation of QMP 5 in CH(3)OH-H(2)O (4:1), the quantum yield of methanolysis is Φ = 0.70. Excitation of naphthols QMP 6-8 to S(1) in CH(3)CN leads to photoionization and formation of naphthoxyl radicals. In a protic solvent, QMP 6-8 undergo solvent-assisted PT giving QM6 or zwitterion QM8 that react with nucleophiles delivering adducts, but with a significantly lower quantum efficiency. QMP 9 in a protic solvent undergoes two competitive processes, photosolvolysis via QM9 and solvent-assisted PT to carbon atom of the naphthalene giving zwitterion. QM9 has been characterized by LFP (in CH(3)CN-H(2)O, λ(max) > 600 nm, τ = 0.9 ms). In addition to photogenerated QMs, two stable naphthalene QMs, QM10 and QM11 were synthesized thermally and characterized by X-ray crystallography. QM10 and QM11 do not react with H(2)O but undergo acid-catalyzed fragmentation or rearrangement. Antiproliferative activity of 5-9 was investigated on three human cancer cell lines. Exposure of MCF-7 cells treated with 5 to 300 nm irradiation leads to an enhanced antiproliferative effect, in accordance with the activity being due to the formation of QM5.