Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Effect of anti-parallel and twisted alignment techniques on various propertiesof polymer stabilised liquid crystal (PSLC) films

Thin composite films consisting of liquid crystal (LC) domains surrounded by polymer networks, termed as polymer stabilised liquid crystals (PSLCs), were prepared by photo-polymerisation of a pre-polymer dissolved in LC. Four composite films were prepared with different rubbing directions and with and without electric field during photo-polymerisation. Morphological characterisation carried our using a polarising optical microscope (POM) and a scanning electron microscope (SEM) reveal significant changes in LC domain morphology and associated polymer networks with the application of electric field during the fabrication of the films. The electro-optic (EO) properties of PSLC films placed between two crossed polarisers were studied using a He–Ne laser under an action of externally applied electric field. It was found that the PSLC film with twisted alignment and polymerised in the presence of electric field showed better EO properties than other films. Transmittance obtained by EO studies was verified with absorbance studies using a Ultraviolet-Visible spectrophotometer. The dielectric behaviour of PSLC films in the frequency range 20–20 MHz was investigated using a precision impedance analyser. The obtained data were modelled using Debye and Cole–Cole methods to calculate relaxation time and distribution parameter. The relaxation time calculated through the Cole–Cole model is in agreement with response time.     

An electrically light-transmittance-switchable film with a low driving voltage based on liquid crystal/polymer composites

ABSTRACT

As a typical class of electrically light-transmittance-switchable (ELTS) composites materials, polymer dispersed liquid crystal (PDLC) films have been widely used in displays, smart windows, light shutters, etc. However, the commercialised PDLC film still requires a comparatively high voltage to maintain its transparent state, leading to huge power consumption and even a potential safety risk. In this regard, we proposed a ‘heat followed UV’ stepwise polymerisation strategy for preparing a kind of ELTS film with a low driving voltage (~20.7 V) through constructing a coexistent system of polymer dispersed and polymer stabilised liquid crystal (PD&SLC). In this new PD&SLC system, vertically orientated polymer networks were formed within LC domains to induce the vertical alignment of LC, thereby reducing the driving voltage. Also, the as-made PD&SLC film exhibited good flexibility due to the high content of polymer. Moreover, the effects of the liquid crystalline polymerisable monomers content on the polymer morphologies as well as the electro-optical properties of the as-made PD&SLC films were elaborately investigated.     

Optical and Calorimetrical Studies of Liquid Crystalline Materials Doped with Nanoparticles

Summary: Electro-optical properties of Polymer Dispersed Liquid Crystal (PDLC) films doped with different nanoparticles (NPs), as well as optical and morphological properties of liquid crystal/NP mixtures have been investigated. PDLC films were prepared by UV irradiation of thiol-ene monomers and liquid crystal E7 in the presence of a small amount (0.5 and 1 wt.%) of nanoparticles. The presence of NP strongly influence the properties of liquid crystal/NP mixtures. In particular, adding nanoparticles results in a decrease of the glass and nematic-isotropic transition temperatures of the LC, suggesting that strong interactions occur between LC and nanoparticles.     

Complex study of reorientational dynamics of the liquid crystal in PDLC films

Morphological, electro-optical and switching properties of polyester resin/nematic liquid crystal composite films have been studied for varying composition (10-40 wt% of LC), temperature (20-50 C), film thickness (10-75 mum) and UV curing time of the matrix (0.25-12 min). The PDLC films were formed by LC separation in a UV polymerization process of the thin layer of oligoester resin (liquid crystal mixture) between ITO coated glass plates. The electro-optical and response behaviour based on the electric field controlled light scattering of the composite films was observed. The results were interpreted in terms of effective anchoring strength at the interface of the polymer and liquid crystal depending either on the area fraction of the interface in the composite film (dependent on the size and shape of the liquid crystal droplets) or the stiffness and resistivity of the polyester resin changing in the course of the crosslinking polymerization.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

The physical properties of alkene-terminated liquid crystal molecules/E8 mixture and the electro-optical properties as they doped in polymer-dispersed liquid crystal systems

Effects of the content of fluorinated alkene-terminated liquid crystal (LC) molecules on the physical properties of the fluorinated alkene-terminated LC/E8 mixture were studied. The morphology and electro-optical properties as they doped in polymer-dispersed liquid crystal (PDLC) films were investigated. The detailed discussion of the obtained results is given. As a result, comparing with the physical properties of the series of LC mixtures with the same content of the analogous fully saturated compounds doped with E8, we find that the birefringence is significantly larger for the LC mixture with the alkene-terminated materials. Both fluorinated alkene-terminated LC molecules and the analogous fully saturated compounds doped with E8 reduce the driving voltage of PDLC films. Moreover, PDLC films with the fluorinated alkene-terminated LC molecules possessed higher contrast ratio and faster response time than that of the PDLC films prepared by adding the same mass fraction of the analogous fully saturated compounds. Thus, the ability to manipulate physical properties of LC mixture and electro-optical properties of PDLC films by changing the LC molecular structures may have future relevance for new LC structures design and applications of PDLC films.     

Morphology and electro-optic responses of poly(methyl methacrylate)/nematic liquid crystal composite films: Effect of the polymer molecular weight

The director configuration, state of liquid crystal (LC) phase aggregation, and the electooptic properties of thin polymer films of poly(methyl methacrylate) (PMMA) containing nematic liquid crystal have been studied. Measurements included scanning electron micrograph (SEM), polarized optical micrographs (POM), and transmittance response of the film with the applied electric AC voltage and frequency. Two types of PMMA with significantly different molecular weight (M_w) were used, and the effects of polymer molecular weight on morphology and electro-optic properties of the composite films were examined. © 1995 John Wiley & Sons, Inc.     

Effect of electric field on phase separation of polymer dispersed liquid crystal

The kinetics of the polymerization induced phase separation of liquid crystal (LC)/monomer mixture has been investigated by means of depolarized light intensity technique and polarized light microscope (PLM). To examine the effect of the electric field, a DC electric field was applied across the mixtures during the phase separation process. The kinetic study indicates that the phase separation process is accelerated when the electric field is applied. The morphologies of the formed polymer dispersed liquid crystal (PDLC) films were observed by PLM. The electric field applied during the phase separation process yields the PDLC with small LC domains and fine morphologies. The clearing temperature (T_NI) of the formed PDLC films was measured by the PLM and it is found that the T_NI increases with the applied electric field intensity.     

Studies on electro‐optical properties of polymer matrix/LC/ITO nanoparticles composites

In this paper, polymer‐dispersed liquid crystal (PDLC) films consisting of liquid crystal (LC)/monomers/indium tin oxide (ITO) nanoparticles with good near‐infrared absorption property had been fabricated, and the influence of the ITO nanoparticles modified with 3‐methacryloxypropyltrimethoxysilane (KH570) on the PDLC films was systematically studied. First, different liquid crystal content was studied to obtain PDLC films with good electro‐optical properties. And then, various weight ratio of ITO nanoparticles was added to samples. While the content of ITO nanoparticles was increased, the saturation voltage increased and the CR decreased. Though the electro‐optical properties of PDLC samples reduced with the addition ITO nanoparticles, the near‐infrared absorption property of films was enhanced.     

The fabrication of novel optical diffusers based on UV-cured polymer dispersed liquid crystals

Polymer dispersed liquid crystals (PDLCs) with different sizes of the LC droplets are prepared based on the ultraviolet (UV) light curable acrylate monomers/LCs composites to fabricate the optical diffuser films. To acquire light diffusers with high optical performance, the effects of the monomer structure and the UV light intensity on the micro-structure of the PDLC films are studied. Results show that the PDLC films could exhibit a strong light scattering at the premise of maintaining high transmittance in the visible region. As the LC droplets are spherically dispersed in the polymer networks, when the size of LC droplets is about 3.0 μm, the haze can reach 88.5% and the transmittance is nearly 90.0%, which can be used as a bottom diffuser film. While when the size of LC droplets is about 10.0 μm, the haze and transmittance are 39.2% and 90.2%, respectively; hence, it can be a good choice for a top diffuser film. With the advantages of simple preparation, roll-to-roll industrial production and tunable optical properties, it is supported that the films based on UV-cured PDLC films can be applied as outstanding optical diffuser films in the liquid crystal display industry.     

Facile fabrication of polymer-dispersed liquid crystal films via nucleophile-initiated thiol-ene click reaction

Nucleophile-initiated thiol-ene click reaction was employed to prepare polymer-dispersed liquid crystal (PDLC) films initiated by 4-dimethylaminopyridine (DMAP). The PDLC films were prepared in different temperature. It is found that the reaction temperature has a big influence on the electro-optical properties of PDLC films and 60°C is the optimal temperature to fabricate PDLC film which has high ON state transmittance (T_on) and low OFF state transmittance (T_off). UV-Visible spectrophotometer, scanning electron microscopy and polarised optical microscope were employed to explore the obtained PDLC films. Nucleophile-initiated thiol-ene click reaction, without UV-light, probably provides a new pathway to prepare PDLC films.     

An investigation on a novel PDLC film’s fabrication and its electro-optical properties

A polymer dispersed liquid crystal (PDLC) film that has good electro-optical properties is produced by the method of polymerized-induced phase separation. Based on the application foreground, its capability parameters, such as contrast ratio, work voltage, and visual angle, are characterized for the first time by a white light but not a fixed wavelength light. The results show the PDLC film has a low work-voltage of 20 V, more than 150° visual angle, high stability, and long lifetime. The differences between plastic and glass ITO-coated substrates of PDLC films are also studied in this paper. The plastic substrate has better property and will have a wider perspective especially in the portable, tender and folded display devices. Due to adjustable properties of film by electric field, PDLC has the potential application for display device, sensor, switch, grating, and new generation analytical apparatus.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

Electro-optical and dielectric study of multi-walled carbon nanotube doped polymer dispersed liquid crystal films

The self-organising property of nematic liquid crystals (LCs) was used to align multi-walled carbon nanotubes (MWCNT) dispersed in them. MWCNT not only well integrate in the matrix but also, even at very low concentration, have a detectable effect on the LC properties that can be very attractive for display applications. In the present work, MWCNT were doped (0–0.5% wt/wt) in two different types of LCs. These MWCNT doped polymer dispersed LC (CPDLC) films were studied comprehensively using fundamental techniques. Polarising optical microscope (POM) and scanning electron microscope (SEM) techniques used for morphological study reveal that the LC droplet size remains unchanged with increase in MWCNT concentration. The electro-optical (EO) study performed by increasing voltage in steps of 10 V up to 100 V at an optimised frequency of 200 Hz and at temperature 25°C shows that the low MWCNT concentration films show good optical response than the higher one. The dielectric behaviour of CPDLC films in the frequency range 20 Hz to 20 MHz was investigated using precision impedance analyser. The obtained data were modelled with Debye and Cole-Cole methods to calculate relaxation time and distribution parameter (α). The zero value of α indicates Debye type relaxation processes.     

The investigation of molecular affinity involved in poly(ethylene glycol)-based polymer-dispersed liquid crystal display

Acrylic polyethylene glycol(PEG)-based polymer-dispersed liquid crystal (PDLC) films have been fabricated to investigate the effect of intermolecular interactions on PDLC performance. For this purpose, the amphiphilic liquid crystal and polymers are selected as PDLC composite materials. The acrylic PEG contents are varied from 0 to 66.66 mol wt.% in order to understand the effects of different levels of additions on the microstructure and electro-optical properties of the PDLC films. For this intention, polarized optical microscopy and UV–vis spectroscopy are used. The extent of phase separation and anchoring energy are also examined using Fourier transform infrared (FTIR) spectroscopy and contact angle measurements in consequence of acrylic PEG addition. The contrast ratio, threshold voltage, as well as saturation voltage, tended to increase with the addition of acrylic PEG. The molecular affinity involved in the polymer matrix and LC molecules affected the phase separation which is responsible for the formation of domain size; this accordingly changed the electro-optical properties of PDLC film.     

Study on the electro-optical properties of polyimide-based polymer-dispersed liquid crystal films

The reflectivity control device, initially developed for attitude control, is utilised to control the solar sail orbit by switching the states between absorption and specular reflection. Actually, the major parts of the device are the polymer-dispersed liquid crystal (PDLC) films. Here, PDLC films based on polyimide (PI) as polymer matrix and a low molecular weight LC can be prepared by the thermally induced phase separation (TIPS) method. The influences of cooling rate and the content of LC on the size and uniformity of LC droplets dispersed in a polymer matrix by a TIPS process were investigated. It was found that a fast cooling rate gave smaller droplet sizes and hence a more uniform distribution as compared to the ones produced under a slow cooling rate. If the LC content was increased, the droplet size would be increased. Furthermore, the effect of LC droplet size on the electro-optical properties of the PI-based PDLC films was discussed, such as transmittance, threshold voltage, driving voltage and contrast ratio (CR).     

Liquid Crystal-Polymer Composite Materials

Polymer dispersed liquid crystal (PDLC) films can be switched electrically from a light-scattering off-state to a highly transparent on-state. Thin films were prepared via a polymerization-induced phase separation process, using electron beam radiation. The liquid crystal (LC)/polymer materials were obtained from blends of an eutectic nematie mixture E7 and a polyester acrylate-based polymer precursor. The optical and electro-optical properties of the PDLC films obtained depend strongly on the LC concentration. The LC solubility limit in the polymer matrix and the fractional amount of LC contained in the droplets were determined by means of calorimetrie measurements.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.