Trifluoromethanesulfonic acid as a catalyst for the formation of dansylhydrazone derivatives

Trifluoromethanesulfonic acid (TFMSA) is presented as a new, efficient catalyst in the pre-column fluorescent derivatization of the 3-ketosteroid budesonide with dansylhydrazine and compared to the commonly used catalyst trifluoroacetic acid. With TFMSA the derivatization reaction may be carried out at room temperature, with a considerably higher reaction rate compared to previously used acids. The chromatograms also show that TMFSA results in less formation of spurious peaks from the reagent. Derivatization of steroid solutions ranging from 0.5 to 64 μM could be performed using identical reaction conditions.     

Synthesis of glycol diesters through the depolymerization of polyethylene glycols with carboxylic acids using a proton-exchanged montmorillonite catalyst

A convenient and sustainable method for the synthesis of glycol diesters was developed through the depolymerization of polyethylene glycols (PEGs) with carboxylic acids using proton-exchanged montmorillonite as an efficient solid acid catalyst. Several functionalized glycol diesters were obtained in good yields from PEGs and readily available carboxylic acids. Upon reaction completion, the catalyst could be easily separated by filtration and reused with its activity remaining unchanged.     

酸性聚乙烯基吡咯烷酮—杂多酸杂化催化剂的合成及其催化酯化反应性能

合成并表征了聚乙烯基吡咯烷酮修饰的杂多酸杂化催化剂PVP-PW,比较了它与其它催化剂上乙酸和正丁醇的酯化反应性能.结果表明,PVP-PW是催化酯化反应的高效多相催化剂,所得酯收率和选择性分别高达98.4%和100%;反应结束后,催化剂通过简单过滤即可分离回收,重复使用6次后,其催化活性没有明显下降.通过改变反应底物羧酸和醇,发现催化剂PVP-PW在众多酯化反应中均具有较高的催化活性.     

Kinetics and mechanism of the production of higher olefins from stearic acid in the presence of an alumina-supported nickel sulfide catalyst

A nickel sulfide catalyst which efficient in the decarbonylation of fatty acids to olefins and dienes has been obtained for the first time by treating alumina-supported nickel sulfate with hydrogen, and its properties have been studied. In its presence, the olefin selectivity of the reaction can exceed 90%. The kinetics of stearic acid deoxygenation to heptadecenes has been investigated, a kinetic model has been constructed, and a mechanism has been proposed for the reaction over this catalyst. Olefin oligomerization is the dominant side reaction. Kinetic evidence for the catalytic inhibition of oligomerization by nickel hydrides formed on the catalyst has been obtained. The compositions of active site–reactant adsorption complexes have been discussed.     

Catalytic enantioselective desymmetrization of meso-N-acylaziridines with TMSCN

A catalytic enantioselective desymmetrization of meso-N-p-nitrobenzoylaziridines with TMSCN was developed using a chiral gadolinium catalyst generated from Gd(OiPr)3 and d-glucose-derived ligand 1. In this reaction, the addition of a catalytic amount of trifluoroacetic acid (TFA) improved enantioselectivity. High enantioselectivity was obtained from a range of meso-aziridines at 0-60 degrees C. The product could be easily transformed into beta-amino acids. Thus, the developed catalytic enantioselective desymmetrization reaction allowed for efficient catalytic synthesis of chiral cyclic beta-amino acids. The incorporation of TFA into the catalyst complex was observed using ESI-MS. Generation of this new complex might be the origin of the improved enantioselectivity.     

Hydrolysis of cellulose by amorphous carbon bearing SO3H, COOH, and OH groups

The hydrolysis of cellulose into saccharides using a range of solid catalysts is investigated for potential application in the environmentally benign saccharification of cellulose. Crystalline pure cellulose is not hydrolyzed by conventional strong solid Br?nsted acid catalysts such as niobic acid, H-mordenite, Nafion and Amberlyst-15, whereas amorphous carbon bearing SO 3H, COOH, and OH function as an efficient catalyst for the reaction. The apparent activation energy for the hydrolysis of cellulose into glucose using the carbon catalyst is estimated to be 110 kJ mol (-1), smaller than that for sulfuric acid under optimal conditions (170 kJ mol (-1)). The carbon catalyst can be readily separated from the saccharide solution after reaction for reuse in the reaction without loss of activity. The catalytic performance of the carbon catalyst is attributed to the ability of the material to adsorb beta-1,4 glucan, which does not adsorb to other solid acids.     

Graphene oxide (GO) catalyzed transamidation of aliphatic amides: An efficient metal-free procedure

Transamidation involves direct interconversion of an amide with amine, and represents an alternative to the common method of amide formation from the reaction of carboxylic acid with an amine. While the carboxamides have huge potential in biological systems and polymer industries, their formation from carboxylic acids requires activation by a suitable catalyst. A metal-free transamidation of aliphatic amide with aromatic amine catalyzed by graphene oxide (GO) has been developed and established as a general, synthetically useful and selective procedure. Graphene oxide bearing several carboxylic acids on the edges and having large surface area acts as an efficient and recyclable catalyst for transamidation.     

Dabco as an inexpensive and highly efficient ligand for palladium-catalyzed Suzuki-Miyaura cross-coupling reaction

An inexpensive and highly efficient Pd(OAc)(2)/Dabco catalytic system has been developed for the cross-coupling of aryl halides with arylboronic acids. A combination of Pd(OAc)(2) and Dabco (triethylenediamine) was observed to form an excellent catalyst, which affords high TONs (turnover numbers; TONs up to 950 000 for the reaction of PhI and p-chlorophenylboronic acid) for Suzuki-Miyaura cross-coupling of various aryl iodides and bromides with arylboronic acids. [reaction: see text]     

Selective Esterification Reaction Involving Hexaalkyl Guanidinium Chloride Catalyst

A new efficient and selective esterification reaction of carboxylic acids with chloroformates is described using silica-supported catalyst (PBGSiCl). The chemioselectivity of the reaction was high particularly for sterically hindered carboxylic acids supported by a single pathway reaction.     

(P(C(6)H(5))(3))CpRu(+)-catalyzed deprotection of allyl carboxylic esters

A new and efficient catalytic method for deprotection of allyl carboxylic esters using a transition metal complex is reported. The reaction proceeds with a high substrate/catalyst ratio and without use of additional nucleophiles, giving the deprotected carboxylic acid in a quantitative yield. A variety of substrates, including the multifunctional amino acids and peptides, are also usable. The new method is more efficient, safe, and operationally simple in comparison to the conventional palladium-catalyzed method.     

Protonic recognition and assembly for the creation of porous Brønsted acid catalysts with enhanced catalytic efficiency

Due to the high local concentration of substrates in confined space, porous solid Brønsted acids have been extensively explored for efficient acid-catalyzed reaction. However, the porous structures with strong Brønsted acids lack long-term stability due to chemical hydrolysis. Moreover, the products inhibition effect in confined rigid cavities severely obstructs subsequent catalysis. Here, tubular Brønsted acid catalyst with unique recognition of protons was presented by self-assembly of pH-responsive aromatic amphiphiles. The responsive assembly could mechanically transfer hydrogen ions from low-concentration acidic solution into tubular defined pores, thereby producing effective catalytic activity for Mannich reactions in mildly acidic solution. Notably, the tubular catalyst unfolded into flat sheets upon addition of triethylamine for efficient release of products, which could be recovered by subsequent acidification and the catalytic activity still remained. Therefore, the porous Brønsted acid with reversible assembly provides a new strategy for mass synthesis through increasing conversion times.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Repurposing n-butyl stannoic acid as highly efficient catalyst for direct amidation of carboxylic acids with amines

This is the first-time report on the repurposing n-butyl stannoic acid as a catalyst for direct amidation of carboxylic acids with amines. Notably, efficient amidation observed in comparison with all other catalytic methods reported up until now. The protocol has successfully applied to the synthesis of a variety of amides. Moderate reaction parameters, clean amidation with excellent yields of desired amides, ability to tolerate a variety of functional groups, easy product isolation; commercial availability and recyclability of the catalyst are key advantages of the current protocol.     

Highly efficient heterogeneous acylations of aromatic compounds with acid anhydrides and carboxylic acids by montmorillonite-enwrapped titanium as a solid acid catalyst

Montmorillonite-enwrapped titanium hydroxide species (Ti⁴⁺-mont) acted as a highly efficient heterogeneous acid catalyst for the acylation of aromatic compounds with acid anhydrides or carboxylic acids. The catalytic activity of the Ti⁴⁺-mont was higher than those of other acid catalysts such as zeolites, SO ₄ ²⁻ /ZrO₂ and p-toluenesulfonic acid. For example, the reaction of anisole with dodecanoic acid in the presence of the Ti⁴⁺-mont catalyst gave 1-(4-methoxyphenyl)-1-dodecanone in 97% yield. Furthermore, the Ti⁴⁺-mont catalyst was easily separated from the reaction mixture and was recyclable.     

Brönsted acid hydrotrope combined catalysis in water: a green approach for the synthesis of indoloquinoxalines and bis-tetronic acids

The present work describes the applications of Brönsted acid hydrotrope combined catalyst (BAHC) as a mild, efficient and reusable catalyst for synthesis of indoloquinoxalines and bis-tetronic acids in water. Using BAHC, we synthesized many indoloquinoxaline derivatives from isatins and o-phenylene diamine using 10 mol% PTSA in 40% aqueous hydrotropic (NaPTS) solution at room temperature with 83–90% yields. On the other hand, the reaction of tetronic acid with the aldehydes/isatins forms bis-tetronic acids with 83–88% yields through Knoevengel condensation-Michael addition pathway in same BHAC. Moreover, the BAHC can be recycled upto 5th cycles with slight decrease in product yields. The extremely simple operational methodology, green solvent, ambient reaction conditions and high yields render this approach extremely appealing for the synthesis of different heterocyclic compounds.

     

A simple and clean method for multicomponent synthesis of spiro [indole-tetrahydropyrano(2,3-d)pyrimidine] derivatives using SBA-Pr-SO3H as catalyst under solvent-free conditions

Sulfonic acid functionalized SBA-15 (SBA-Pr-SO₃H) as a new nanoporous solid acid catalyst was applied in the green one-pot synthesis of spiro[indole-tetrahydropyrano(2,3-d)pyrimidine] derivatives via three-component reaction of isatins, malononitrile or cyanoacetic esters and barbituric acids under solvent-free conditions. SBA-Pr-SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm, which could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused several times without any loss of activity. The advantages of this methodology are high product yields, being environmentally benign, short reaction times, and easy handling.     

TiO2 nanoparticles as an effective catalyst for the synthesis of hexahydro-2-quinolinecarboxylic acids derivatives

The one-pot three-component reaction of arylmethylidenepyruvic acids,1,3-cyclohexandiones and ammonium acetate provides an economical and efficient synthetic route to 5-oxo-4-aryl-l,4,5,6,7,8-hexahydro-2-quinolinecarboxylic acid 4 under solvent-free conditions using a catalytic amount of TiO₂ nanoparticles（TiO₂ NPs） as an effective heterogeneous catalyst.     

A convenient,eco-friendly,and efficient method for synthesis of bis(3-indolyl)methanes “on-water”

Abstract

A convenient, eco-friendly, and efficient method for synthesis of bis(3-indolyl)methanes by the reaction of indoles with various aromatic aldehydes “on-water” has been developed. The attractive features of this method are that in cases of aldehydes which are easily oxidized to acids, no external catalyst is necessary while in other cases a trace amount (ca. 5 mol%) of commercially available and inexpensive catalyst benzoic acid is sufficient to give good to excellent yield of products.     

手性磷酸催化的有机催化不对称反应

手性磷酸是近年来发展起来的一类新型高效、高对映选择性的Brønsted酸类有机催化剂, 已成功应用于催化不对称Mannich反应、还原胺化反应、Pictet-Spengler反应、aza-Diels-Alder反应和aza-Ene反应等许多重要的有机合成反应. 手性磷酸催化剂分子内同时含有Lewis碱性位点和Brønsted酸性位点, 可同时活化亲电与亲核底物. 作为一种新型双功能有机催化剂, 手性磷酸具有较高的催化活性和对映选择性, 催化剂最低用量可达0.05 mol%. 对各类手性磷酸催化剂在有机催化不对称合成反应中的应用研究进展, 以及不对称诱导反应的机理、手性磷酸的分子结构及反应条件对其催化活性和不对称诱导活性的影响进行了评述.     

Suzuki–Miyaura Cross-Coupling of Bromotryptophan Derivatives at Ambient Temperature

Mild reaction conditions are highly desirable for bio-orthogonal side chain derivatizations of amino acids, peptides or proteins due to the sensitivity of these substrates. Transition metal catalysed cross-couplings such as Suzuki–Miyaura reactions are highly versatile, but usually require unfavourable reaction conditions, in particular, when applied with aryl bromides. Ligand-free solvent-stabilised Pd-nanoparticles represent an efficient and sustainable alternative to conventional phosphine-based catalysts, because the cross-coupling can be performed at considerably lower temperature. We report on the application of such a highly reactive heterogeneous catalyst for the Suzuki–Miyaura cross-coupling of brominated tryptophan derivatives. The solvent-stabilised Pd-nanoparticles are even more efficient than the literature-known ADHP-Pd precatalyst. Interestingly, the latter also leads to the formation of quasi-homogeneous Pd-nanoparticles as the catalytic species. One advantage of our approach is the compatibility with aqueous and aerobic conditions at near-ambient temperatures and short reaction times of only 2 h. The influence of different N^α-protecting groups, boronic acids as well as the impact of different amino acid side chains in bromotryptophan-containing peptides has been studied. Notably, a surprising acceleration of the catalysis was observed when palladium-coordinating side chains were present in proximal positions.