涂石蜡大米傅立叶变换红外吸收光谱识别分析

针对11种未涂石蜡大米和18个涂不同量石蜡的大米样品,以石油醚提取的油脂为试样,采用傅立叶变换红外光谱仪,扫描样品的傅立叶变换红外吸收光谱,并对光谱进行预处理,提取红外特征信息,将2855与1746、1462与1163 cm-1处特征峰的面积比值为坐标,采用Origín 6.0软件作识别分类图.结果表明:特征峰的面积比值与所涂石蜡量成线性变化,大米油脂的特征峰面积比值在一定的区域分布,涂以0.05%以上石蜡的大米,其油脂特征峰面积比值与未涂石蜡米油脂的值有一定区别.     

Structure analysis of polyether-based thermoplastic polyurethane elastomers by FTIR, 1H NMR and 13C NMR

One kind of unknown structure sequence and composition ratio of thermoplastic polyurethane elastomers were characterized by nuclear magnetic resonance spectroscopy, Fourier transformed infrared spectroscopy, and gel permeation chromatography (GPC). The results showed that the polyurethane (PU) was obtained from poly(tetramethylene glycol) (PTMG) as soft segment, 1,4-butanediol (BDO) as chain extender, and 4,4′-methylenediphenyl diisocyanate (MDI) as hard segment. Furthermore, the composition ratio of MDI:PTMG:BDO was 2.07:1.22:1.00. At last, the molecular weight of PU was determined by GPC, and the number average molecular weight (M_n) and weight average molecular weight (M_w) are 63,300 and 133,800?g?mol^?1, respectively.     

TGA/FT-IR: Thermogravimetric analysis with fourier transform infrared detection of evolved gases

Thermogravimetric analysis (TGA) is a widely employed technique for measuring the change in weight of a sample as a function of temperature or time in a controlled atmosphere. FT-IR has been utilized with success in the identification of gases [1]. The combination of these two techniques permits a complete characterization of materials in terms of thermal stability and decomposition mechanisms [2]. A complete integrated system for TGA/FT-IR analysis is described.     

An in situ Fourier transform infrared spectroscopy method for collecting real-time data for the liquid-phase reaction of CO2 and mono-ethanolamine in alcoholic solvent systems

A novel Fourier transform infrared (FTIR) spectroscopy method of analysis was developed to study the industrially important reaction of CO₂ with the primary amine, mono-ethanolamine (MEA), in n-propanol as representative alcoholic solvent. A semi-batch reactor with a piston like ‘floating’ head was specifically designed in order to study the reaction in the liquid phase, thereby eliminating the mass transfer limitations of a gas-liquid system. An attenuated total reflectance (ATR) probe was used to monitor the change in reagent and product concentrations in-situ. Successful spectral peak identification and calibrations were performed in order to collect real time, reaction kinetic data. Data analysis confirmed that the zwitterion reaction mechanism most accurately describes the reaction in non-aqueous systems.     

Determination of sucrose by flow injection analysis with fourier transform infrared detection

A new methodology for the determination of sucrose in complex aqueous matrices by flow injection analysis with FTIR detection is presented. The methodology based on the enzymatic hydrolytic cleavage of sucrose by means of invertase to -D-glucose and -D-fructose. A special manifold consisting of two internally coupled injection valves being switched simultaneously is applied to facilitate recording FTIR spectra of the sample before and after the enzymatic reaction. The analytical readout is taken from the resulting difference spectrum obtained by subtracting the FTIR spectra of the sample before and after the reaction. The developed methodology uses a GC-IR software to continuously record the FTIR spectra of the effluent from the manifold. The proposed method gives linear results in the range of 10 to 100 mmol/l and has been successfully applied to the analysis of sucrose in synthetic mixtures as well as in real samples such as soft drinks.     

Comparative analysis of smokeless gunpowders by Fourier transform infrared and Raman spectroscopy

Fourier Transform Infrared (FTIR) and Raman spectroscopic techniques were used to perform a comparative study of the spectral profiles of single-base, double-base and triple-base smokeless gunpowders. Preliminary results based on visual comparison of the spectra point out that spectra obtained by both vibrational techniques were useful for a rapid identification of gunpowders containing dinitrotoluene as one of the major components and triple-base gunpowders. Additionally, the Raman spectra of gunpowders with diphenylamine in its primary composition showed a characteristic band, assigned to 2-nitro-diphenylamine, allowing the identification of this type of gunpowders.     

Varietal difference in cellulose microfibril dimensions observed by infrared spectroscopy

We have previously reported a novel Fourier transform infrared (FTIR) method for evaluating both the accessibility and lateral dimensions of cellulose microfibrils. This method differs from conventional deuteration in that the OH groups in the crystalline region were initially completely deuterated. The samples were then rehydrogenated by immersing them in water at 25 °C, during which only the OD groups on the surface were rehydrogenated. The ratio of OD to OH groups measured for cellulose from various origins was used to estimate microfibril dimensions, which were compared with the data from X-ray diffractometry. The rehydrogenation process was further investigated by immersing the deuterated samples in water at elevated temperatures. The behavior of rehydrogenation under heat treatment was converted to observe the microfibril shape, which was in good agreement with the cross-sectional images obtained by diffraction contrast transmission electron microscopy techniques.     

High-resolution solid-state 13C NMR study of ethylcellulose films

Ethylcellulose films cast from concentrated solutions of chloroform, benzene, and carbon tetrachloride were subjected to the NMR relaxation measurements including ¹H spin-lattice relaxation time (T_1H), rotating-frame ¹H spin-lattice relaxation time (T_1ρH), and ¹³C spin-lattice relaxation time (T_1C). The values of T_1ρH for carbons in the glucose units of ethyl-cellulose were of the same order of magnitude as those reported for the crystalline and noncrystalline regions of ramie cellulose. The values of T_1C for unsubstituted C2, C3 carbons were smaller than those for the corresponding carbons in the noncrystalline region of native celluloses. The T_1C values for unsubstituted C2, C3, and substituted C6 carbons showed a small but definite dependence on the solvent from which the films were cast. © 1993 John Wiley & Sons, Inc.     

Structure determinations of nitrogen compounds with the aid of NQR, NMR, and ESCA spectroscopy

Since it is often necessary or desirable to determine the structures of compounds containing nitrogen directly via the nitrogen atoms, the nuclear quadrupole resonance (NQR) and the nuclear magnetic resonance (NMR) as well as the photoelectron and the Auger-electron spectroscopy (ESCA) of nitrogen are becoming increasingly important. A comparative review of these three methods on the basis of measurement effect, information obtainable, applications, and limitations forms the subject of this article.     

The effect of TiO2 on the structure and devitrification behavior of potassium titanium germanate glass

The effect of replacing 20 mol% of GeO₂ by TiO₂ on the properties of potassium germanate glass was investigated. The structure and devitrification behaviour of glasses were studied by Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA) and X-ray diffraction (XRD). It was observed that potassium titanium germanate has a higher glass transition temperature and a higher thermal stability vs. crystallization. The presence of two exothermic peaks on the DTA curve of potassium germanate glass indicates the complex crystallization process. The XRD pattern of this glass heated at the temperature of the first crystallization peak indicated that the GeO₂ and K₂Ge₇O₁₅ were formed. Only the K₂TiGe₃O₉ phase was identified, in a case when potassium titanium germanate glass was heated at the temperature of the crystallization peak.     

Molecular level study of the crystallization of a thermoplastic polyimide by infrared spectroscopy

The crystallization process of the thermoplastic polyimide derived from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 2,2-dimethyl-1,3,-(4-aminophenoxy) propane (DMDA) is studied at the molecular level by utilizing infrared spectroscopy's sensitivity to local molecular environment. Assignments of the unique spectral features appearing upon crystallization are made with additional verification from crystalline model imide compounds. A direct comparison of an annealed polyimide film studied by both infrared spectroscopy and x-ray diffraction shows fairly close agreement in the amount of crystallinity obtained. The unique crystalline infrared spectral features provide insight into the molecular mechanism involved with the crystallization process. Spectral shifts occurring upon crystallization reflect intramolecular rotations toward increased coplanarity as well as intermolecular chain packing of certain molecular groups at specific sites of the chain backbone. The site specific information is then used to study the relative kinetic behavior of the intramolecular and intermolecular effects occurring during crystallization. © 1994 John Wiley & Sons, Inc.     

Characterization of nano FeIII-tannic acid modified polyacrylate in controlled-release coated urea by Fourier transform infrared photoacoustic spectroscopy and laser-induced breakdown spectroscopy

Polyacrylate polymer (PA) has been widely applied in coating products for decades. Recently, it has been used in controlled-release fertilizers. Nano Fe^III-tannic acid modified PA (PA-Fe) provides a better nutrient controlled release performance than conventional PA. In this work, a preliminary database of molecular and elemental information about the polymer was obtained using FTIR-PAS (Fourier transform infrared photoacoustic spectroscopy) and LIBS (laser-induced breakdown spectroscopy), respectively. The PA-Fe polymer contained more hydrophobic groups (–CH₃) and fewer hydrophilic groups (–COOR, –COOH) than PA. More elements were detected for PA-Fe than PA. LIBS was useful to identify and classify PA and PA-Fe samples using principal component analysis. The combination of spectroscopic results and a film formation process model explained the lower nutrient release rate of PA-Fe. These results showed the strong analytical capabilities of FTIR-PAS combined with LIBS for identifying and characterizing modified PA.     

Dynamic study of the noncrystalline phase of 13C-labeled polyethylene by variable-temperature 13C CP/MAS NMR spectroscopy

The ¹³C spin-lattice relaxation times T₁ of ¹³C-labeled polyethylene crystallized under different conditions were measured at temperatures from ?120 to 44°C by variable-temperature solid-state high-resolution ¹³C nuclear magnetic resonance (NMR) spectroscopy, in order to determine accurately the dynamics of the noncrystalline region of the polymer. From these results, it was found that the T₁ minimum for the CH₂ carbons in the noncrystalline region of solution-crystallized polyethylene with high crystallinity appears at higher temperature by about 20°C than that of melt-quenched polyethylene with low crystallinity. This means that the molecular motion of the CH₂ carbons in the noncrystalline regions is more constrained at a given temperature in the material of higher crystallinity. Furthermore, dynamics of the noncrystalline region is discussed in terms of the ¹³C dipolar dephasing times.     

热重分析-单滴微萃取-气相色谱-质谱结合傅里叶变换红外光谱考察咖啡酸的热解行为

采用热重分析-单滴微萃取-气相色谱-质谱(TG-SDME-GC-MS)联用系统和傅里叶变换红外光谱,研究了咖啡酸的热解行为。设定热重分析仪5 ℃/min的升温速率及400 mL/min的氮气流量,在160～360 ℃温度范围内,采用乙醇对热解逸出物质进行单滴微萃取,然后利用GC-MS分离分析,监测了咖啡酸5种主要热解逸出产物相对含量随温度升高的动态变化情况。使用傅里叶变换红外光谱分析了咖啡酸所对应各失重点固体剩余物的特征官能团变化情况。结果表明,咖啡酸热失重的主要原因是在240～360 ℃产生大量的邻苯二酚,在200～220 ℃热解产生4-乙基邻苯二酚。另外,咖啡酸在230 ℃下已完全裂解。该方法的建立为温度连续上升模式下的物质热解行为分析提供了借鉴和参考。     

傅里叶变换红外光谱和核磁共振法对土壤中腐殖酸的表征

采用氢氧化钠碱提法提取和纯化了我国４种典型土壤中腐殖酸,分别用元素分析、傅里叶变换红外光谱（ＦＴＩＲ）、固仿核磁共振（ＮＭＲ）等方法对提取腐殖酸进行了表征。结果表明,４种土壤中腐殖酸原ＦＴＩＲ图谱相似,含有相同类型的官能团。对ＮＭＲ不同化学位移域的谱峰积分获得４种土壤腐殖酸的各组成比例,组成中以烷氧基Ｃ的含量最高,脂类Ｃ略高于芳香Ｃ含量。     

Preliminary study on application of mid infrared spectroscopy for the evaluation of the virgin olive oil "freshness"

The freshness of virgin olive oils (VOO) from typical cultivars of Garda regions was evaluated by attenuated total reflectance (ATR) and Fourier transform infrared (FTIR) spectroscopy, in combination with multivariate analysis. The olive oil freshness decreased during storage mainly because of oxidation processes. In this research, 91 virgin olive oils were packaged in glass bottles and stored either in the light or in the dark at room temperature for different periods. The oils were analysed, before and after storage, using both chemical methods and spectroscopic technique.Classification strategies investigated were partial least square discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and soft independent modelling of class analogy (SIMCA).The results show that ATR-MIR spectroscopy is an interesting technique compared with traditional chemical index in classifying olive oil samples stored in different conditions. In fact, the FTIR PCA results allowed a better discrimination among fresh and oxidized oils, than samples separation obtained by PCA applied to chemical data. Moreover, the results obtained by the different classification techniques (PLS-DA, LDA, SIMCA) evidenced the ability of FTIR spectra to evaluate the olive oil freshness. FTIR spectroscopy results are in agreement with classical methods. The spectroscopic technique could be applied for the prediction of VOOs freshness giving information related to chemical modifications. The great advantages of this technique, compared to chemical analysis, are related to rapidity, non-destructive characteristics and low cost per sample. In conclusion, ATR-MIR represents a reliable, cheap and fast classification tool able to assess the freshness of virgin olive oils.     

Quantitative analysis of near surfaces three‐dimensional orientation of polymer chains in PET and PEN films using polarized ATR FTIR spectroscopy

Polarized attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy was utilized to characterize the three‐dimensional orientation of polymer chains near highly anisotropic surfaces generated by uniaxial drawing. A versatile method was proposed to analyze the molecular orientation of the polymers by combining the experimental refractive indices and optimized contact pressure by an anvil for solving the optical contact problem. This method is effective even when changes in the molecular orientation along the thickness direction caused by drawing are remarkable. In addition, this method enables quantitative comparison of the molecular orientation among different polymers in the same coordinate system. From the molecular orientation analysis of poly (ethylene terephthalate) (PET) and poly (ethylene naphthalate) (PEN), it was revealed that this method has a broader range of applications with high accuracy in estimating the molecular orientation of polymers compared with the conventional methods. The significant changes in the molecular orientation caused by uniaxial and biaxial drawing of PET and PEN films were quantitatively analyzed, and the reasons for the significant in‐plane orientation of PEN chains on the film plane are discussed. In addition, the difference in the molecular orientation between both sides of the films was also demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 870–879, 2010     

松杉灵芝不同部位的红外光谱分析研究

采用红外光谱三级鉴定法对松杉灵芝菌盖、表皮、菌柄、子实体不同部位的红外光谱图进行了整体分析。结果表明:松杉灵芝的各部位均含萜类、甾醇类、氨基酸、多肽、蛋白质和糖苷类等物质。在松杉灵芝的一维红外光谱中,菌盖的1 649cm-1峰的相对强度明显比表皮、菌柄和子实体强,说明菌盖中所含的氨基酸、多肽、蛋白质物质的量比其它部位高;在二阶导数谱中,四者在1 720~1 600cm-1范围内峰形差别较大,进一步说明松杉灵芝不同部位所含氨基酸、多肽、蛋白质物质不一致;而二维相关红外光谱中,各部位自动峰的数目、峰位置和峰相对强度都有所不同,可推断松杉灵芝各部位本身所含的糖苷类物质是不一致的。