Preparation and characterisation of laterally monofluorinated mesogenic benzimidazole-based compounds

Series of laterally monofluorinated compounds, 2-(4?-alkoxy-3-fluorobiphenyl-4-yl)-1H-benzimidazole derivatives (nPPF(3)Mx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(3)MH, nPPF(3)MM and nPPF(3)MN, respectively) at 5-position, were prepared and their structures were characterised. According to the results from differential scanning calorimetry and polarising optical microscopy, the present compounds nPPF(3)Mx exhibit enantiotropic smectic mesophases, for which the mesophase ranges are 13–67 and 47–111°C on heating and cooling for nPPF(3)MH, 84–112 and 126–154°C for nPPF(3)MM, and 23–102 and 49–117°C for nPPF(3)MN, respectively. Compared to non-fluorinated analogues, monofluorinated nPPF(3)Mx have low melting/clearing points and display enhanced mesophase range both in heating and cooling, which are attributed to the disruption of the side-to-side intermolecular packing caused by the ortho lateral fluoro substituents and the increased dipole–dipole interaction between the polar fluoro-substituted molecules, respectively. It is noted that nPPF(3)MM and nPPF(3)MN show a much wider mesophase range than nPPF(3)MH, which suggest that the substituent at benzimidazole moiety can improve the mesophase stability.     

Synthesis and study the liquid crystalline properties of compounds containing benzoxazole core and terminal vinyl group

Terminal vinyl-based benzoxazole liquid crystalline compounds, 2-(3-fluoro-4?-alkoxy-1,1?-biphenyl ?4-yl)-5-(2-propenyloxymethyl)-benzoxazole (nPPF(2)BP), were synthesised and their structures were confirmed by infrared (IR) spectra, proton nuclear magnetic resonance (¹H-NMR) spectra, gas chromatography with electron impact-mass spectrometry (GC/EI-MS), matrix-assisted laser desorption/ionisation-time of flight (MALDI-TOF) mass spectrometry and elemental analysis (EA). The compounds show enantiotropic smectic/nematic phases with mesophase ranges are 71–97 °C and 87–136°C on heating and cooling processes for nPPF(2)BP, respectively. They give low melting points due to lateral fluoro substituent and flexible terminal 2-propenyloxymethyl chain. It is found that the compounds nPPF(2)BP with shorter alkoxy chain (n = 3, 4) exhibit a wide range of nematic mesophase, which is ascribed to enhanced π–π interaction caused by terminal vinyl moiety, whereas further elongation of the terminal alkoxy chain results in supressing nematic phase and increasing smectic mesophase. Compared with methyl terminated analogues, 2-propenyloxymethyl terminated compounds nPPF(2)BP display much lower melting points and wider or comparable mesophase range both in heating and cooling.     

Preparation and mesomorphic properties of 1-methyl-1H-benzimidazole-based compounds

A series of 1-methyl-1H-benzimidazole-based compounds, 2-(4?-alkoxy-1,1?-biphenyl-4-yl)-1-methyl- 1H-1,3-benzimidazole derivatives (nPPMx-M) with terminal hydrogen, methyl and nitro moieties (coded as nPPMH-M, nPPMM-M and nPPMN-M, respectively), were prepared and their structures were characterised. The compounds display enantiotropic smectic mesophases for hydrogen and methyl terminated compounds (nPPMH-M and nPPMM-M), and enantiotropic nematic mesophases for nitro terminated compounds (nPPMN-M) with short alkoxy chain below than 10 carbon atoms, where the mesophase ranges are 24–72°C and 74–104°C on heating and cooling processes for nPPMH-M, 90–119°C and 110–135°C for nPPMM-M, and 102–129°C and 113–207°C for nPPMN-M, respectively. It is noted that the compounds nPPMx-M exhibit much lower melting points and much wider mesophase range both in heating and cooling than non-1-methyl substituted analogs, which are ascribed to the disruption of hydrogen bonding among the molecules caused by methyl substitution at 1-position of benzimidazole. Meanwhile, among the compounds nPPMx-M, much wider mesophase ranges are obtained for nPPMM-M and nPPMN-M, indicating a much high mesophase stability for the compounds bearing terminal moiety (CH₃ and NO₂).     

Synthesis and mesomorphic properties of benzoxazole derivatives with lateral multifluoro substituents

Fluorinated aromatics is generally chosen as mesogenic cores to design novel liquid crystal compounds. Here, a series of benzoxazole derivatives with laterally multifluorinated biphenyl units, 2-(3′,3-difluoro ?4′-alkoxy-1,1′-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(3)PF(3)Bx), are synthesized and characterized, where methyl and nitro moieties are selected as terminal groups to investigate the effects of different polar substituents on the liquid crystal properties. The compounds nPF(3)PF(3)Bx show enantiotropic mesophases with mesophase ranges of 0–40°C and 0–63°C on heating and cooling for hydrogen-terminated derivatives (nPF(3)PF(3)BH), 43–93°C and 54–123°C for methyl-terminated ones (nPF(3)PF(3)BM), 60–108°C and 74–152°C for nitro terminated ones (nPF(3)PF(3)BN), respectively. They exhibit photoluminescence emission peaks at 390–392 nm and UV–vis absorption bands with maxima at 327–330 nm, respectively. The results reveal that lateral multifluoro substituents lead to a decrease in melting/clearing points, while electron-withdrawing terminal nitro moiety results in increases in both melting point and mesophase range.     

Hybrid liquid crystals tetrazolyl and isoxazolyl cinnamates

In this work, a series of isoxazolyl and tetrazolylcinnamic ester hybrid liquid crystals (HLCs) were synthesised and their mesomorphic behaviour was analysed. Cinnamic acid derivatives were prepared by Knoevenagel condensation of malonic acid and arylaldehydes. Five-membered tetrazoles and isoxazoles were prepared by [3 + 2] 1,3-dipolar cycloaddition. Tetrazoles were synthesised by sodium azide addition to arylnitrile, while isoxazoles were synthetised by arylnitrile oxide addition to alkenes to form isoxazolines, followed by MnO₂-oxidation. Tetrazolyltolane compounds were also synthesised and their LC behaviour compared with cinnamic esters. HLCs containing isoxazole rings displayed a large mesophase range with high clearing temperature (T_c), with predominance of smectic mesophases SmA and SmC. The HLCs decomposed upon heating due to their high clearing temperature (>250°C). HLCs with tetrazole rings showed a narrow nematic mesophase range with enantiotropic or monotropic behaviour.     

Preparation and properties of laterally multifluorinated benzoxazole-based nematic mesogens

Series of laterally multifluorinated heterocyclic compounds, 2-(2?,3-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (nPF(2)PF(3)Bx), are prepared and characterised. They mainly display enantiotropic nematic mesophases with wider mesophase ranges of 12–107°C (heating process) and 22–134°C (cooling process) than the corresponding analogues. The enhanced nematic mesophase stability is achieved via slightly increasing inter-ring twist angle with inter-ring lateral fluorine substitute in biphenyl unit, as well as through improving the molecular polarity with multifluorine substitutes. Meanwhile, two inter-ring lateral fluorine atoms lead to a decrease in melting/clearing points and a wide nematic mesophase range, which makes it possible for heterocyclic mesogens nPF(2)PF(3)Bx to use in nematic liquid crystal display mixtures.     

2-(4-Biphenylyl)-1,3,4-oxadiazoles: synthesis and mesogenic studies

A series of 2-(4-biphenylyl)-1,3,4-oxadiazoles bearing alkyl or alkoxy substituents at the 4? position, and a hydrogen, or alkyl substituent (linear, branched, fluorinated or functionalised) at the 5 position were synthesised and characterised (51 compounds). Their mesogenic properties were evaluated using differential scanning calorimetry and polarising optical microscopy. Results show that substitution of the 1,3,4-oxadiazole ring for a terminal benzene ring in a conventional p-terphenyl enriched the mesogenic properties. Most of the new oxadiazole compounds exhibit either monotropic or enantiotropic smectic A mesophases with widths ranging from 3 to 50°C. A few compounds (short tailed) exhibit nematic phases and some compounds with branched or fluorinated alkyl substituents at the 5 position are also mesogenic.     

Synthesis of two naphthyl-containing homologous series of mesogenic ligands and the related metallomesogens containing Cu(II)

Two new naphthyl-containing homologous series of mesogenic ligands, the 4-n-alkoxy-2-hydroxybenzylidene-2'-naphthylamines (series I) and 4(4'-n-alkoxybenzoyloxy)-2-hydroxybenzylidene-2'-naphthylamines (series II), as well as the related metallomesogens of higher homologues containing a Cu(II) atom, have been synthesized. All the ligands and complexes were characterized by a combination of elemental analysis and standard spectroscopic methods. In series I, n-heptyloxy and n-octyloxy derivatives are non-mesogenic whereas the remaining higher members synthesized exhibit a monotropic nematic mesophase. In series II, all the members synthesized exhibit an enantiotropic nematic mesophase. All the metallomesogens of series I synthesized exhibit a monotropic smectic A mesophase, except for the n-octyloxy derivative, which is non-mesogenic, whereas metallomesogens of series II exhibit enantiotropic nematic mesophases up to the n-tetradecyloxy derivatives; the n-tetradecyloxy and n-hexadecyloxy derivatives also exhibit smectic C mesophases. All the members of series II and their metallomesogens exhibit mesophases with wide temperature ranges and greater thermal stability as compared to series I and their metallomesogens, respectively. The mesomorphic properties of both the present series and their metallomesogens are compared with each other and with other structurally related series to evaluate the effect of the naphthalene moiety on mesomorphism.     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

Synthesis and mesomorphic properties of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives

Three series of 2-(4′-alkoxybiphenyl-4-yl)-1H-benzimidazole derivatives (nM-x), which possessed 5-nitrobenzimidazole (nM-N series), benzimidazole (nM-H series) or 5-methylbenzimidazole (nM-M series) units at the end of the molecule, were synthesised and characterised by infrared, ¹H- and ¹³C-nuclear magnetic resonance spectra, electrospray ionisation-mass spectrometry and elemental analysis. Their phase transition behaviour was investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. All the compounds exhibited enantiotropic smectic mesophases with wide temperature domains for a carbon number in the alkoxy chain from 6 to 16, where the mesophase ranges were 14–91°C and 17–99°C during heating and cooling processes for the nM-N compounds, 7–25°C and 8–49°C for the nM-H compounds and 48–81°C and 52–85°C for the nM-M compounds, respectively. The effect of the length of alkoxy chain on mesomorphic properties was discussed. The nM-N and nM-M exhibited a much wider mesophase range whether during heating or cooling process than the corresponding nM-H series, especially for the longer terminal chain (n > 8), which indicated that the substituent in the benzimidazole moiety was helpful in increasing the mesophase stability.     

Liquid crystal dimers containing Cholesteryl and Triazole-containing mesogenic units

ABSTRACT

New liquid crystals categorised as cholesteryl dimers have been successfully synthesised through the reaction between cholesteryl 4-(prop-2-ynyloxy)benzoate moieties with n-azido(cholesteryloxy-carbonyl)alkane. All the dimers display enantiotropic mesophases. Whilst the odd-numbered dimers exhibit chiral nematic (N*), twisted grain boundary (TGB) and chiral smectic C (SmC*) phases, the even-numbered members from the same series show chiral smectic A and C. A detailed inspection on mesophase reveals that the chiral centres and the bent conformation of the odd-numbered members are essential for the induction of TGB phase. However, upon decreasing the temperature, the ratio of the transition temperatures (T_SmC*-SmA*/T_SmA*-I) is found to be 0.95, which indicate the second order transition according to the McMillan’s molecular theory. In addition, the X-ray diffraction study supports the presence of the smectic A phase on the even members rather than the N* by the appearance of the Bragg diffraction peaks at 190°C. A comparison study with the other analogues in which the cholesterol entity is substituted by azobenzene or biphenyl tails has been carried out to assess the relationship between the molecular structure and mesomorphic behaviour.     

Synthesis and mesomorphic properties of some platinum(II) and oxovanadium(IV) complexes

The synthesis and mesomorphic properties of a homologous series of N-(2-hydroxy-4-n-alkoxybenzylidene)-4'-n-decylphenylanilines and their platinum(II) and oxovanadium(IV) complexes are reported. All the ligands and their metal chelates exhibit enantiotropic mesophases, predominantly smectic A and smectic C phases. The transition temperatures and enthalpies have been determined for most of the compounds. The platinum(II) complexes have higher melting points and mesophase thermal stabilities. However, the oxovanadium(IV) complexes have a wider thermal range for the mesophase. Both platinum(II) and oxovanadium(IV) complexes containing only a chain on the biphenyl moiety exhibit a nematic phase.     

New liquid crystalline di- and tetra-acrylates for network formation

New liquid crystalline diacrylates and tetra-acrylates containing four to six aromatic rings were synthesized and characterized, and their mesophase behaviour was investigated. They are designed to be used in combination with chiral molecules to form cholesteric mesophases which can be crosslinked by photopolymerization. The acrylates presented exhibit broad mesophase ranges since mesogenic moieties longer than three are employed. Most diacrylates show no isotropization, due to premature thermal polymerization above 180°C. Additionally, liquid crystalline dipropionates were synthesized as reference compounds which cannot be crosslinked, and selected examples of these exhibit isotropization temperatures as high as 238°C prior to thermal degradation. Substituents at the mesogenic moiety have a great influence on the mesophase characteristics. Bulky substituents such as the tert-butyl group, induce a nematic mesophase, whereas compounds with small substituents (e.g. OCH3) or unsubstituted molecules also exhibit smectic phases. Tetra-acrylates with unsubstituted and substituted mesogenic units feature nematic mesophases only as a result of the additional spacers attached. Here isotropization was observed without polymerization at temperatures around 120-160°C.     

Dependence of Mesomorphic Behaviour of Methylene‐Linked Dimers and the Stability of the NTB/NX Phase upon Choice of Mesogenic Units and Terminal Chain Length

Twelve symmetrical dimeric materials consisting of a nonamethylene (C9) spacer and either phenyl 4‐(4′‐alkylphenyl)benzoate, phenyl 4‐(4′‐alkylcyclohexyl)benzoate or phenyl 4‐(4′‐alkylbicyclohexyl)carboxylate mesogenic units were prepared and their mesogenic behaviour characterised by POM, DSC and XRD. All of the materials exhibited nematic phases with clearing points in excess of 200 °C. Four compounds were found to exhibit the twist‐bend nematic phase, with one material exhibiting a transition from the N_TB phase into an anticlinic smectic ‘X’ phase. Across all three series of compounds the length of terminal chain is seen to dictate, to some degree, the type of mesophase formed: shorter terminal chains favour nematic and N_TB mesophases, whereas longer terminal aliphatic chains were found to promote smectic phases.     

Cholesterol-based dimeric liquid crystals: synthesis and mesomorphic behaviour

Chiral non-symmetric dimeric liquid crystals consisting of a cholesteryl ester moiety as chiral entity and a biphenyl aromatic core, interconnected through n-butyl (C₄) or n-pentyl (C₅) parity alkylene spacers, have been synthesized and investigated for their liquid crystalline properties. All the dimers exhibit enantiotropic mesophases. The first member of the dimers having the C₄ central spacer exhibit only the chiral nematic (N*) mesophase, while the higher homologues also show smectic A (SmA) and twist grain boundary (TGB) mesophases. The dimers of the other series containing the C₅ central spacer also have stable SmA, TGB and N* mesophases, except for the first which does not show the TGB phase. Both series of compounds show a weak odd-even effect with terminal alkyl chain substitution, while the spacer length has a marked influence on the phase transition temperatures.     

Mesogenic cinnamates with a substituted ethyl terminal chain

Two new mesogenic homologous series of liquid crystalline cinnamates with substituted ethyl tails, β-methoxyethyl [4-(4'-n-alkoxycinnamoyloxy)benzoates (I) and β-chloroethyl [4-(4'-n-alkoxycinnamoyloxy)benzoates (II), have been synthesized and characterized by a combination of elemental analysis and standard spectroscopic methods. In series I, lower-chain members exhibit nematic mesophase, middle members exhibit enantiotropic nematic as well as smectic A (SmA) mesophases, whereas higher members exhibit only an enantiotropic SmA mesophase. In series II, methoxy to n-butyloxy derivatives exhibit a monotropic nematic mesophase. The SmA mesophase commences from n-propyloxy derivative as monotropic and persists up to the last member synthesized. The mesomorphic properties of present series were compared with each other and with a structurally related mesogenic homologous series to evaluate the effects of substituted ethyl tail and cinnamoyloxy central linkage on mesomorphism.     

Synthesis and study of 4‐(4′‐n‐alkoxybenzoyloxybenzoyl)‐4′′‐n‐butoxyanilides

Thirteen compounds with ester and amide linkages were synthesized and their mesogenic properties evaluated. Methyl to n‐propyl derivatives exhibit nematic phases, n‐butyl to n‐decyl derivatives exhibit smectic and nematic mesophases, whereas n‐dodecyl to n‐octadecyl derivatives exhibit only smectic phases. All the smectic homologues exhibit smectic C phases. Middle members of the homologous series exhibit polymorphism of smectic mesophase. A plot of transition temperatures versus number of carbon atoms in the alkoxy chain reveals an odd–even effect for nematic–isotropic transition temperatures. Nematic–isotropic and smectic–cholesteric thermal stabilities of the prepared compounds (series I) are higher compared to those of previously reported compounds, series A, B and C. The results indicate that a simple reversal of a central linkage has a dramatic effect on the appearance of smectic mesophase in a homologous series. The structures of the synthesized compounds were characterized using elemental analysis, thin‐layer chromatography and spectral data.     

Synthesis and characterisation of benzoxazole-based liquid crystals possessing 3,5-difluorophenyl unit

Series of fluorinated compounds, 2-(3′,5′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nFBx), were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. In the case of carbon atoms in the alkoxy chain between 4 and 10, they exhibited enantiotropic mesophases with the mesophase ranges of 12–119°C and 23–152°C on heating and cooling for compounds bearing different substituents (H, CH₃, Cl, and NO₂). With the exception of nitro-substituted compounds, the nFBx series displayed intense photoluminescence emission at 380–385 nm in methylene chloride solution when they were excited at their absorption maxima. Compared to non-fluorinated analogues, fluorinated compounds nFBx (apart from nitro-substituted compounds) exhibited much lower melting points, but comparable or slightly narrower mesophase ranges during both heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two lateral fluoro substituents.     

Synthesis,characterisation and liquid crystalline properties of some Schiff base and cinnamate central linkages involving 1,3,5-trisubstituted pyrazolone ring system and their Cu(II) complexes

Two new mesogenic homologous series, each containing 1,3,5-trisubstituted pyrazolone derivatives, 4-n-alkoxyphenyl and Schiff base–cinnamate central linkages, have been synthesised to give 4-[(5-hydroxy-3-methyl-1-phenyl-4,5-dihydro-1H-pyrazol-4-yl) methyleneamino] phenyl 3-(4-n-alkoxyphenyl)acrylate [Series-A] and 4-[(5-hydroxy-3-methyl-1-p-tolyl-4,5-dihydro-1H-pyrazol-4-yl)methyleneamino] phenyl 3-(4-n-alkoxyphenyl)acrylate [Series-B] and their Cu(II) complexes have also been synthesised. These compounds were characterised by elemental analysis, Fourier transform infrared (FT-IR), proton nuclear magnetic resonance (¹H NMR), carbon-13 NMR (¹³C NMR) and ultraviolet (UV)-visible and mass spectral studies. Their mesomorphic behaviour was studied by polarising optical microscope (POM) with a heating stage. POM data were compared with differential scanning calorimetry thermograms. In Series-A and -B, all compounds exhibit mesomorphism. Series-A compounds exhibit an enantiotropic nematic mesophase except propyl derivative, while a smectic A (SmA) mesophase is observed from the heptyl derivative and persists up to the last member of the homologous series. n-Heptyloxy derivative is monotropic for SmA phase. Series-B compounds also exhibit the enantiotropic nematic mesophase, while the SmA mesophase is observed from the heptyl derivative and persists up to the last member of the homologous series. n-Dodecyloxy derivative exhibits monotropic SmA and nematic mesophases. The mesomorphic properties of both series are compared with each other and the other structurally related compounds. The study reveals that cinnamate linkage containing liquid crystals have higher thermal stability compared to structurally related series containing chalcone linkage. In case of complex series, only one compound from each series gives nematic mesophase.     

Cholesterol-based dimeric liquid crystals: synthesis and mesomorphic behaviour

Chiral non-symmetric dimeric liquid crystals consisting of a cholesteryl ester moiety as chiral entity and a biphenyl aromatic core, interconnected through n-butyl (C₄) or n-pentyl (C₅) parity alkylene spacers, have been synthesized and investigated for their liquid crystalline properties. All the dimers exhibit enantiotropic mesophases. The first member of the dimers having the C₄ central spacer exhibit only the chiral nematic (N*) mesophase, while the higher homologues also show smectic A (SmA) and twist grain boundary (TGB) mesophases. The dimers of the other series containing the C₅ central spacer also have stable SmA, TGB and N* mesophases, except for the first which does not show the TGB phase. Both series of compounds show a weak odd-even effect with terminal alkyl chain substitution, while the spacer length has a marked influence on the phase transition temperatures.