Optimized solid phase extraction based on diethyldithiocarbamate-coated Fe3O4 magnetic nanoparticles followed by ICP-OES for determination of Cd(II) and Ni(II) in rice and water samples

In the present study, application of Fe₃O₄ magnetic nanoparticles (MNPs) coated with diethyldithiocarbamate as a solid-phase sorbent for extraction of trace amounts of cadmium (Cd²⁺) and nickel (Ni²⁺) ions by the aid of ultrasound was investigated. The analytes were determined by inductively coupled plasma-optical emission spectroscopy. Fe₃O₄ MNPs were prepared by solvothermal method and characterized with dynamic light scattering, scanning electron microscope and X-ray diffraction. Response surface methodology was used for optimization of the extraction process and modeling the data. The optimal conditions obtained were as follows: chelating agent, 1.2 g L^?1; pH, 6.13; sonication time, 13 min and Fe₃O₄ MNPs, 10.3 mg. The calibration curves were linear over the concentration range of 1–1,000 μg L^?1 for Cd²⁺ and 2.5–1,000 for Ni²⁺ with the determination coefficients (R ²) of 0.9997 and 0.9995, respectively. The limits of detection were 0.27 μg L^?1 for Cd²⁺ and 0.76 μg L^?1 for Ni²⁺. The relative standard deviations (n = 7, C = 200 μg L^?1) for determination of Cd²⁺ and Ni²⁺ were 2.0 and 2.7 %, respectively. The relative recoveries of the analytes from tap, river and lagoon waters and rice samples at the spiking level of 10 μg L^?1 were obtained in the range of 95–105 %.     

Use of ionic liquid based chitosan as sorbent for preconcentration of fluoroquinolones in milk,egg, fish,bovine, and chicken meat samples by solid phase extraction prior to HPLC determination

The possibility of using ionic liquid based chitosan sorbent for the separation and preconcentration of fluoroquinolone antibiotics (marbofloxacin, enoxacin, ofloxacin, ciprofloxacin, and enrofloxacin) has been studied. For this reason, different ionic liquids were prepared and coated on the chitosan sorbent. The conditions of the preconcentration of fluoroquinolones on a microcolumn have been optimized and the extraction efficiencies of the prepared sorbents have been compared. The compounds were eluted with 5 mL of 20% NH₃ (v/v, MeOH) solution and determined by HPLC with diode array and fluorescence detector. The limits of detection were found as 4.23 µ g L^?1 for marbofloxacin, and 1.09 µg L^?1 for enoxacin; 3.23 × 10^?3 µg L^?1 for ofloxacin; 8.39 × 10^?3 µg L^?1 for ciprofloxacin; and 19.50 × 10^?3 µg L^?1 for enrofloxacin. The developed method was applied for the analysis of fluoroquinolone in milk, egg, fish, bovine, and chicken samples and the recoveries were obtained in the range 70–100%.     

Determination of Zn(II) in rock and vegetable samples after acidic digestion followed by ultrasound-assisted solid-phase extraction with reduced graphene oxide as novel sorbent,in combination with flame atomic absorption spectrometry

Graphene, a novel class of carbon nanostructures, has great promise for use as sorbent materials because of its ultrahigh specific surface area. A new method using reduced graphene oxide (RGO) as sorbent was developed for the preconcentration of trace amounts of zinc (Zn) to its determination by flame atomic absorption spectrometry. Zinc could be adsorbed quantitatively on RGO in the pH range of 1–9, and then eluted completely with 0.5 mL of 0.1 mol L^?1 HCl. Some effective parameters on the extraction were selected and optimized. Under optimum conditions, the calibration graph was linear in the concentration range of 0.2–15 μg L^?1 with a detection limit of 0.14 μg L^?1 with an enrichment factor of 100.12. The relative standard deviation for ten replicate measurements of 10 μg L^?1 of Zn was 0.58 %, respectively. The proposed method was successfully applied in the analysis of rock and vegetable samples. Good spiked recoveries over the range of 99.9–100 % were obtained. This work not only proposes a useful method for sample preconcentration, but also reveals the great potential of graphene as an excellent sorbent material in analytical processes.     

MultiSimplex optimization of the dispersive solid-phase microextraction and determination of fenitrothion by magnetic molecularly imprinted polymer and high-performance liquid chromatography

A magnetic molecularly imprinted polymer (MMIP) was fabricated and used as the sorbent for the MMIP-dispersive solid-phase microextraction of fenitrothion prior its determination by high-performance liquid chromatography equipped with an ultraviolet detector. The MMIP was prepared using functionalized Fe₃O₄ nanoparticles as the magnetic supporter. Methacrylic acid, ethylene glycol dimethacrylate and fenitrothion were used as the functional monomer, the cross-linker and the template, respectively. The properties of the resultant MMIP were evaluated using X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorbent exhibited high selectivity and affinity toward fenitrothion compared to other organophosphate pesticides with the maximum adsorption capacity of 31.5 mg g^?1. The effective variables on the extraction were optimized by univariable and MultiSimplex methods. The calibration curve exhibited linearity over the concentration range of 0.3–50.0 μg L^?1 with the limit of detection of 0.1 μg L^?1. The relative standard deviations at 10.0 μg L^?1 level of FNT (n = 5) for intra- and inter-day assays were 1.6 and 3.1%, respectively. The proposed method was successfully used for the determination of trace amounts of FNT in food and water samples.     

Extraction and preconcentration of 17α-ethynylestradiol as an endocrine-disrupting agent from environmental water samples by a modified magnetic nanosorbent

A rapid, simple and efficient procedure is demonstrated for extraction and determination of an endocrine-disrupting compound, synthetic estrogen, 17α-ethynylestradiol (EE2), in water and wastewater samples via magnetic solid-phase extraction followed by high-performance liquid chromatography coupled with UV detection. The analytical method is based on extraction of EE2 by dispersing magnetic nanoparticles in sample solution for a desired time and then eluting the analytes with an appropriate solvent. The nanoparticles were modified with a hydrophobic material by self-assembling an organosulfur compound (bis-(2,4,4-trimethylpentyl)-dithiophosphinic acid) onto the silver-coated Fe₃O₄ nanoparticles as sorbent. The effects of several parameters, such as amount of sorbent, sample volume, extraction time, ionic strength and desorption conditions, were examined to obtain better efficiency. The optimized methodology exhibited a good linearity between 0.5 and 100 μg L^?1 with a limit of detection (LOD) of 0.3 μg L^?1, and a preconcentration factor of 245 with intra- and inter-day precisions (relative standard deviations) 2.4 and 3.2 %, respectively. The developed method was successfully applied for extraction and determination of EE2 in different real water samples including river water, surface water and influent and effluent of a wastewater treatment plant, and satisfactory results were achieved. The method, which provides a good preconcentration factor, a low LOD and low consumption of the organic solvent, presents a rapid, simple and efficient procedure for determining EE2 in aqueous samples.     

Generic Automated Fluorimetric Assay for the Quality Control of Gamma Aminobutyric Acid-Analogue Anti-Epileptic Drugs Using Sequential Injection

The first sequential injection assay for the generic determination of gabapentin and pregabalin is reported. The analytes react with o-phthalaldehyde in the presence of N-acetylcysteine as a nucleophilic reagent in alkaline medium under flow conditions to form highly fluorescent derivatives. The effect of the main instrumental and chemical variables on the assay was examined. The proposed method was validated for both analytes in terms of linearity, detection, and quantitation limits (c _L  = 160 μg L^?1, c _Q  = 480 μg L^?1 for gabapentin, and c _L  = 70 μg L^?1, c _Q  = 210 μg L^?1 for pregabalin), precision (s _r  < 1.0% in both cases), selectivity, and accuracy. The applicability of the assay was demonstrated by successfully analyzing commercially available formulations. The experimental percent recoveries were in the range of 97.9–102.0% for gabapentin and 98.3–102.3% for pregabalin.     

Determination of N-methylcarbamate pesticides using flow injection with photoinduced chemiluminescence detection

A sensitive, economic, rapid and simple method for the determination of four N-methylcarbamate pesticides: methomyl (2.0–80 μg L^?1), aldicarb (5.0–50 μg L^?1), butocarboxim (2.0–60 μg L^?1) and oxamyl (2.0–60 μg L^?1); is reported. It relies on the coupling of photoinduced chemiluminescence (PICL) detection with flow injection (FI) methodology. The automation of FI together with the use of light as a reagent decreased the environmental impact of the analysis. The proposed method was based on the oxidation of these pesticides, previously irradiated on-line with UV light, with cerium(IV), using quinine as a sensitiser. Limits of detection below the legal limits (100 ng L^?1) established by the European Union for drinking waters were obtained without the need of preconcentration steps. A good inter-day reproducibility (1.6–6.4%, n = 5), repeatability (rsd = 2.7 %, n = 25) and high throughput (123 h^?1) were achieved. The method was successfully applied to the determination of methomyl in natural waters with mean recoveries ranging from 90% to 98%.     

Synthesis and application of polythiophene-coated Fe3O4 nanoparticles for preconcentration of ultra-trace levels of cadmium in different real samples followed by electrothermal atomic absorption spectrometry

In this research, magnetic Fe₃O₄ nanoparticles were synthesised by co-precipitation method and modified with polythiophene (PT) to produce Fe₃O₄-PT nanoparticles for preconcentration and determination of cadmium (??) ion followed by electrothermal atomic absorption spectrometry. The results of FT-IR spectroscopy, EDX analysis and SEM images show that Fe₃O₄-PT nanoparticles were synthesised successfully. Different parameters such as sample pH, amounts of adsorbent, sample volume, extraction time, type and concentration of eluent and desorption time were completely investigated and optimum conditions were selected.

Under the optimum conditions, the calibration curve was linear in the range of 0.01–0.25 µg L^?1 of cadmium (??). The relative standard deviation was 4.7% (n = 7, 0.10 µg L^?1 Cd²⁺) and limit of detection was 3.30 ng L^?1. The accuracy of the proposed method was verified by the analysis of a certified reference material and spike method. Finally, the proposed method was applied for the determination of ultra-trace levels of cadmium (??) in different water and food samples.     

Preconcentration of trace amounts of cobalt (II) ions in water and agricultural products samples using of 5-(4-dimethylaminobenzylidene) rhodanin modified SBA-15 sorbent prior to FAAS determination

In the present study, the ?5-(4-dimethylaminobenzylidene)rhodanin-modified SBA-15? was applied as stable solid sorbent for the separation and preconcentration of trace amounts of cobalt ions in aqueous solution. SBA-15 was modified by ?5-(4-dimethylaminobenzylidene)rhodanin reagent. The sorption of Co²⁺ ions was done onto modified sorbent in the pH range of 6.8–7.9 and desorption occurred in 5.0 mL of 3.0 mol L^?1 HNO₃. The results exhibit a linear dynamic range from 0.01 to 6.0 mg L^?1 for cobalt. Intra-day (repeatability) and inter-day (reproducibility) for 10 replicated determination of 0.06 mg L^?1 of cobalt was ±1.82% and ?±1.97%?. Detection limit was 4.2 µg L^?1 (3S_b, n = 5) and preconcentration factor was 80. The effects of the experimental parameters, including the sample pH, flow rates of sample and eluent solution, eluent type and interference ions were studied for the preconcentration of Co²⁺. The proposed method was applied for the determination of cobalt in standard samples, water samples and agricultural products.     

A magnetic metal-organic framework as a new sorbent for solid-phase extraction of copper(II), and its determination by electrothermal AAS

We report on the synthesis of Fe₃O₄-functionalized metal-organic framework (m-MOF) composite from Zn(II) and 2-aminoterephthalic acid by a hydrothermal reaction. The magnetic composite is iso-reticular and was characterized by FTIR, X-ray diffraction, SEM, magnetization, and TGA. The m-MOF was then applied as a sorbent for the solid-phase extraction of trace levels of copper ions with subsequent quantification by electrothermal AAS. The amount of sorbent applied, the pH of the sample solution, extraction time, eluent concentration and volume, and desorption time were optimized. Under the optimum conditions, the enrichment factor is 50, and the sorption capacity of the material is 2.4 mg g^?1. The calibration plot is linear over the 0.1 to 10 μg L^?1 Cu(II) concentration range, the relative standard deviation is 0.4 % at a level of 0.1 μg L^?1 (for n?=?10), and the detection limit is as low as 73 ng L^?1. We consider this magnetic MOF composite to be a promising and highly efficient material for the preconcentration of metal ions.

Magnetic dispersive solid phase extraction using modified magnetic multi-walled carbon nanotubes combined with electrothermal atomic absorption spectrometry for the determination of selenium

A novel magnetic dispersive solid phase extraction method using magnetic multi-walled carbon nanotubes modified with 5-mercapto-3-phenyl-1,3,4-thiadiazole-2-thione potassium salt (bismuthiol II) (MMWCNTs@Bis) as the sorbent was developed for the separation and preconcentration of inorganic selenium (IV) prior to its determination by electrothermal atomic absorption spectrometry. The prepared MMWCNTs@Bis sorbent was characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, vibrating sample magnetometer and X-ray diffraction. Total selenium was determined after reduction of Se(VI) to Se(IV) by addition of hydrochloric acid and heating the mixture in a boiling water bath. Se(VI) concentration was determined from the difference between the amounts of total selenium and Se(IV). Under the optimised experimental conditions, an enhancement factor of 196 and a detection limit (based on 3S_b/m) of 0.003 µg L^?1 was obtained for aqueous samples. The relative standard deviation at 0.1 µg L^?1 concentration level of Se(IV) (n = 6) was found to be 5.2 and 7.7% for intra- and inter-day analysis, respectively. The method was successfully applied to the determination of inorganic selenium species in water and total selenium in food samples.     

Attapulgite modified with 2-hydroxy-1-naphthaldehyde as selective solid-phase extractant for determination of copper(II) in environmental samples by ICP-OES

Attapulgite modified with 2-hydroxy-1-naphthaldehyde was prepared and applied to the separation, preconcentration and determination of Cu(II) in aqueous solutions by inductively coupled plasma optical emission spectrometry. Experimental conditions for effective adsorption of trace levels of Cu(II) were optimized using batch and column procedures. The optimum pH value for the separation of Cu(II) on the newly sorbent was 4.0 and complete elution of Cu(II) from the sorbent surface was carried out using 2 mL of 0.01 mol L^?1 HCl. The adsorption capacity for Cu(II) was 25.13 mg g^?1. The detection limits of the method defined by IUPAC were found to be 0.24 μg L^?1 with enrichment factor of 150. The method has been applied to the determination of Cu(II) in certified reference materials and natural water samples with satisfactory results.     

FAAS slurry analysis of lead and copper ions preconcentrated on titanium dioxide nanoparticles coated with a silver shell and modified with cysteamine

We report on the separation and preconcentration of lead(II) and copper(II) ions using silver-coated titanium dioxide nanoparticles modified with cysteamine, and their determination by slurry analysis via flame atomic absorption spectrometry. The ions were adsorbed via a conventional batch technique, and the ion-loaded slurry was separated and directly introduced into the spectrometer, thereby eliminating a number of drawbacks. The effects of pH, amount of sorbent, slurry volume, sample volume and other ions on the recovery were investigated. Under optimized experimental conditions, copper and lead can be recovered within the 95% confidence level in certificated waste water, but also in spiked sea water samples. The technique is fast, simple, and leads to complete elution. The limit of detection (3δ, at n?=?10) was 0.37 μg L^?1 for Cu(II), and 0.38 μg L^?1 for Pb(II).

Crystal structures and in vitro anticancer studies on new unsymmetrical copper(II) Schiff base complexes derived from meso-1,2-diphenyl-1,2-ethylenediamine: a comparison with related symmetrical ones

Two new unsymmetrical copper(II) Schiff base complexes, [CuLⁿ(py)]ClO₄ (n = 1, 2) in which Lⁿ represents a tridentate N₂O type Schiff base ligand, were synthesized. Lⁿs were derived from monocondensation of meso-1,2-diphenyl-1,2-ethylenediamine with salicylaldehyde or 3-methoxysalicylaldehyde. The reaction between [CuLⁿ(py)]ClO₄ and other salicylaldehyde derivatives resulted in new N₂O₂ unsymmetrical tetradentate Cu^II complexes, CuL^3–6. Crystal structures of [CuL¹(py)]ClO₄, CuL⁴, and CuL⁵ were obtained. These new complexes as well as a series of related symmetrical ones (i.e. CuL^7–12) were tested for their in vitro anticancer activity against human liver cancer cell line (Hep-G2) by MTT and apoptosis assay. All of the complexes showed considerable cytotoxic activity against tumor cell lines (IC₅₀ = 5.13–16.24 μg mL^?1). The symmetrical CuL⁷ was the most potent anticancer derivative (IC₅₀ = 5.13 μg mL^?1) compared to the control drug 5-FU (IC₅₀ = 5.4 μg mL^-1, p < 0.05). Flow cytometry experiments showed that the copper derivatives especially [CuL²(py)]ClO₄ and CuL⁷ induced more apoptosis on Hep-G2 tumor cell lines compared to 5-FU.     

Graphene oxide-packed micro-column solid-phase extraction combined with flame atomic absorption spectrometry for determination of lead (II) and nickel (II) in water samples

A sensitive and simple method has been established for simultaneous preconcentration of trace amounts of Pb (II) and Ni (II) ions in water samples prior to their determination by flame atomic absorption spectrometry. This method was based on the using of a micro-column filled with graphene oxide as an adsorbent. The influences of various analytical parameters such as solution pH, adsorbent amount, eluent type and volume, flow rates of sample and eluent, and matrix ions on the recoveries of the metal ions were investigated. Using the optimum conditions, the calibration graphs were linear in the range of 7–260 and 5–85 μg L^?1 with detection limits (3S_b) of 2.1 and 1.4 μg L^?1 for lead and nickel ions, respectively. The relative standard deviation for 10 replicate determinations of 50 μg L^?1 of lead and nickel ions were 4.1% and 3.8%, respectively. The preconcentration factors were 102.5 and 95 for lead and nickel ions, respectively. The adsorption capacity of the adsorbent was also determined. The method was successfully applied to determine the trace amounts of Pb (II) and Ni (II) ions in real water samples. The validation of the method was also performed by the standard reference material.     

Separation and preconcentration of trace quantities of copper ion using modified alumina nanoparticles, and its determination by flame atomic absorption spectrometry

We report on a sensitive, reliable and relatively fast method for separation, preconcentration and determination of trace quantities of copper(II) ion. It is making use of nanometer-sized γ-alumina nanoparticles modified with sodium dodecyl sulfate (SDS). The adsorptive potential was assessed via a Langmuir isotherm and the maximal sorption capacity was found to be 138 mg g^-1. The effects of pH values, amount of ligand, flow rate, type of eluting agent, volume of eluent, and the volume of sample were examined. The effects of interfering ions on the recovery of the analyte were also investigated. Copper ion was then determined by flame atomic absorption spectrometry. The relative standard deviation for five replicate determinations (at 50 μg L^?1 of copper) is 3.3%. The detection limit (at 3 s) is 2.5 μg L^?1. This method was validated with a certified reference material of oyster tissue (NIST SRM 1566b) and the results coincided well with the certified values. The procedure was successfully applied to the determination of Cu in water and food samples.

Application of vortex-assisted supramolecular solvent liquid–liquid microextraction for trace determination of nitroaniline isomers

A novel, fast and efficient method for the analysis of nitroaniline isomers as model compounds was developed using vortex-assisted supramolecular solvent liquid–liquid microextraction (VA-SMS-LLME). A vortex mixer was used as the mixer in supramolecular solvent liquid–liquid microextraction, and it decreased the extraction time greatly. Several important parameters influencing extraction efficiency, such as the type and volume of extraction solvent, pH of sample, salt effect and extraction time, were optimised in detail. Under the optimal conditions, the enrichment factor was 133 for p-nitroaniline, 98 for m-nitroaniline and 115 for o-nitroaniline, and the limits of detection by HPLC were 0.3, 1.0 and 0.5 μg L^?1, respectively. Linearity with determination coefficient from 0.9981 to 0.9993 was evaluated using water samples spiked with the nitroanilines at fourteen different concentration ranging from 4 to 1000 μg L^?1. The ranges of intra-day and inter-day precision (n = 5) at 10 μg L^?1 of nitroanilines were 1.67–7.05% and 9.4–11.6%, respectively. The VA-SMS-LLME method was successfully applied for preconcentration of nitroanilines in environmental water samples.     

An Ionic Liquid Loaded β-Cyclodextrin-Cross-Linked Polymer as the Solid Phase Extraction Material Coupled with High-Performance Liquid Chromatography for the Determination of Rhodamine B in Food

A novel method for separation and determination of rhodamine B in food samples is described. The work is based on the utilization of an ionic liquid loaded β-cyclodextrin cross-linked polymer coupled with high-performance liquid chromatography for the determination of rhodamine B. The inclusion interaction of the ionic liquid-β-cyclodextrin cross-linked polymer with rhodamine B was studied by FTIR. Under optimum conditions, the preconcentration factor achieved for this method was approximately 20. The linear range, detection limit, and relative standard deviation were 0.80 to 130.0 µg L^?1, 0.09 µg L^?1, and 0.66% (n = 3, concentration = 10.0 µg L^?1), respectively. The technique was successfully applied for determination of rhodamine B in food samples.     

Application of Ni(II)-imprinted cross-linked poly(methacrylic acid) synthesised through double-imprinting method for the on-line preconcentration of Ni(II) ions in aqueous media

The present paper describes the feasibility of on-line preconcentration of nickel ions from aqueous medium on Ni(II)-imprinted cross-linked poly(methacrylic acid) (IIP) synthesised through a double-imprinting method and their subsequent determination by FAAS. The proposed method consisted in loading the sample (20.0 mL, pH 7.25) through a mini-column packed with 50 mg of the IIP for 2 min. The elution step was performed with 1.0 mol L^?1 HNO₃ at a flow rate of 7.0 mL min^?1. The following parameters were obtained: quantification limit (QL) – 3.74 µg L^?1, preconcentration factor (PF) – 36, consumption index (CI) – 0.55 mL, concentration efficiency (CE) – 18 min^?1, and sample throughput – 25 h^?1. The precision of the procedure assessed in terms of repeatability for ten determinations was 5.6% and 2.5% for respective concentrations of 5.0 and 110.0 µg L^?1. Moreover, the analytical curve was obtained in the range of 5.0–180.0 µg L^?1 (r = 0.9973), and a 1.64-fold increase in the method sensitivity was observed when compared with the analytical curve constructed for the NIP (non-imprinted polymer), thus suggesting a synergistic effect of the Ni(II) ions and CTAB on the adsorption properties of the IIP. The practical application of the adsorbent was evaluated from an analysis of tap, mineral, lake and river water. Considering the results of addition and recovery experiments (90.2–100 %), the efficiency of this adsorbent can be ensured for the interference-free preconcentration of the Ni(II) ions.     

Selective extraction and preconcentration of ultra-trace amounts of arsenic(V) ions using carbon nanotubes as a novel sorbent

In the present study, multiwalled carbon nanotubes (MWCNTs) as solid phase extraction sorbent were developed for preconcentration of arsenic(V) species prior to graphite furnace atomic absorption spectrometry (GFAAS) determination. Arsenic(V) was selectively sorbed on the packed column with MWCNTs within a pH 9.5 in the presence of 2-(5-bromo-2-pyridylazo)-5-diethyl amino phenol (5-Br-PADAP). The adsorbed species was then desorbed with 1 mL of 2.0 M HNO₃. Experimental parameters including pH, sample volume and flow rate, type, volume and concentration of eluent that influence the recovery of the arsenic(V) species were optimised. Under the optimised conditions, the calibration curve was linear in the range of 0.2–10.0 µg L^?1 with detection limit of 0.016 µg L^?1. The relative standard deviations (RSD) for seven replicate determinations at 1.0 µg L^?1 level of arsenic was 6.69%. The proposed method was successfully applied to the determination of arsenic in water samples and certified reference material (NIST RSM 1643e).