Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

Preparation and characterization of nylon 6/Cu2+-exchanged and Fe3+-exchanged montmorillonite nanocomposite

Nylon 6/Cu²⁺-exchanged and Fe³⁺-exchanged montmorillonite nanocomposites have been prepared by a melt intercalation technique directly from Cu²⁺-exchanged and Fe³⁺-exchanged montmorillonite. Hexadecyltrimethylammonium bromide was chosen as the clay/matrix reactive compatibilizer. The intercalation spacing and the degree of dispersion were determined by X-ray diffraction and transmission electron microscopy. Also the thermal character of the nanocomposites prepared was analyzed by thermogravimetric analysis.     

Perimedine-linked rhodamine dye in visual sensing of Al3+, Fe3+ and Fe2+ ions in aqueous organic medium under different experimental conditions

ABSTRACT

Perimedine labelled rhodamine dye 1 has been designed and synthesised. Metal ion binding studies of 1 have been performed in CH₃CN/H₂O (3:1, v/v, 10 mM Tris-HCl buffer, pH = 6.90). Compound 1 senses multiple metal ions such as Al³⁺, Fe³⁺ and Fe²⁺ by exhibiting turn on fluorescence and colour change (colourless to pink) under different experimental conditions. Concentration variation distinguishes Al³⁺ from Fe³⁺ ion. At low concentration (c = 1 x 10^?4 M), only Al³⁺ ion can exhibit turn on fluorescence with sharp colour change. Sensing of Fe²⁺ ion through turn on fluorescence and colour change has been possible via in situ oxidation by following Fenton’s reaction.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

Reduction of Cu2+ to Cu+ in Xerogels Prepared from (3-Aminopropyl)Trimethoxysilane

Silica gels doped with Cu²⁺ ions were prepared from the (3-aminopropyl) trimethoxysilane (APTMOS)/tetraethoxysilane (TEOS) systems. Sols showed a broad absorption peak at 640 nm, suggesting 3–5 coordination of the aminopropyl groups to Cu²⁺. For gels prepared from APTMOS and dried at room temperature, the 640 nm peak decreased and a red-shifted absorption appeared below 400 nm within a few months. The luminescence spectra of the xerogels showed emission bands at 430–470 and 510 nm. The former and latter bands are ascribed to Cu⁺ monomer and dimer emissions, respectively. These results indicate that Cu²⁺ ions are reduced to Cu⁺. When xerogels were prepared from APTMOS/TEOS = 1 (vol/vol), the color of xerogels was blue with an absorption peak at around 670 nm, indicating no reduction of Cu²⁺ ions.     

A new rhodamine-based dual chemosensor for Al and Cu

A new rhodamine B derivative bearing a hydrazone group has been designed and prepared. The synthesized colorimetric and fluorescent molecular chemosensor can be used as a dual probe, selectively detecting Al³⁺ and Cu²⁺ in acetonitrile solution by monitoring changes in the absorption and fluorescence spectral patterns. The results show that Al³⁺ ions can induce a greater fluorescence enhancement, while the addition of Cu²⁺ ions induces a strong UV–vis absorption enhancement with weak fluorescence. The limits of detection of Cu²⁺ and Al³⁺ were estimated to be 2.9 × 10⁻⁷ M and 8.3 × 10⁻⁹ M, respectively.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

A selective and sensitive chemosensor for Cu based on 8-hydroxyquinoline

A novel 8-hydroxyquinoline derivative 3 was synthesized. Significant fluorescent quenching was found in the presence of Cu²⁺ and Hg²⁺ with notably higher selectivity for Cu²⁺ than Hg²⁺.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Epoxy-based oligomer containing dithia-aza-based naphthylazobenzene pendant: a chemosensor for Hg2+ and Cu2+ ions

A simple epoxy-based oligomer 1 containing naphthylazobenzene-appended dithia-aza moieties was prepared. In UV–vis measurements, the proposed oligomer showed the ion-sensing ability to Hg²⁺ and Cu²⁺ ions. The discrimination between two differently responding Hg²⁺ and Cu²⁺ ions was also realised from ‘ON–OFF’ type fluorescence responses of 1.     

A coumarin-based fluorescent probe for selective detection of Cu2+ in water

Fluorescent Red GK, a commercially available coumarin-based dye, was developed as a “turn-off” fluorescent probe for detection of Cu²⁺ in aqueous solution. It exhibited high selectivity and sensitivity at room temperature. Upon addition of Cu²⁺, the strong fluorescence of Fluorescent Red GK was severely quenched and its color changed from orange to colorless under illumination with a UV lamp; the color of the solution also changed from pink to colorless. So, it can be used as a specific colorimetric and fluorescent probe for Cu²⁺ with a detection limit as low as 0.0634?μM.     

Electrically induced fluorescence Fe sensing behavior of nanostructured Tiron doped polypyrrole

Nanostructured polypyrrole (PPy) film doped with Tiron was electrodeposited from aqueous solution on the surface of transparent electrode and used for sensitive, selective and rapid electrically controlled fluorescence detection of Fe³⁺ in aqueous media. The fluorescence intensity of PPy-Tiron film decreases linearly in the presence of Fe³⁺ by applying negative potential over a concentration range from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹, with a relatively fast response time of less than 30 s at pH 7.4. The detection is not affected by the coexistence of other competitive metal ions such as Al³⁺, Ce³⁺, Tl³⁺, La³⁺, Bi³⁺, Cr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺. The proposed electro-fluorescence sensor has a potential application to the determination of Fe³⁺ in environmental and biological systems. The fluorescent thin film sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

A novel method for the simple and simultaneous preconcentration of Pb2+, Cu2+ and Zn2+ ions with aid of diethylenetriamine functionalized SBA-15 nanoporous silica compound

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺, Cu²⁺ and Zn²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with diethylenetriamine groups and flame atomic absorption spectrometry (FAAS) is presented. The preconcentration factor of the method is 100 and detection limit of the technique is 5.5?ng?mL^?1 and 1.4?ng?mL^?1 and 0.1?ng?mL^?1 for Pb²⁺, Cu²⁺ and Zn²⁺ respectively. The time and the optimum amount of the sorbent, pH and minimum amount of acid for stripping of ions from functionalized SBA-15 were tested. The maximum capacity the functionalized SBA-15 was found to be 183.0 (±1.9) µg, 156.0 (±1.5) µg and 80.0 (±1.6) µg of Pb²⁺, Cu²⁺ and Zn²⁺/mg functionalized SBA-15, respectively.     

A New Coumarin-Acridone Compound as a Fluorescence Probe for Fe3+ and Its Application in Living Cells and Zebrafish

A new coumarin-acridone fluorescent probe S was designed and synthesized, and the structure was confirmed with ¹H/¹³C NMR spectrometry, single-crystal X-ray diffraction, and high-resolution mass spectrometry. This probe has high sensitivity and selectivity for Fe³⁺ over other testing metal ions at 420 or 436 nm in acetonitrile–MOPS (3-Morpholinopropanesulfonic Acid) buffer solution (20.0 μM, pH = 6.9, 8:2 (v/v)). Under physiological conditions, the probe displayed satisfying time stability with a detection limit of 1.77 µM. In addition, probe S was successfully used to detect intracellular iron changes through a fluorescence-off mode, and the imaging results of cells and zebrafish confirmed their low cytotoxicity and satisfactory cell membrane permeability, as well as their potential biological applications.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

EPR studies of Cu2+ in tetraaqua-di(nicotinamide) Zn(II)-saccharinate single crystals

Electron paramagnetic resonance (EPR) studies of copper ions, Cu(II), as paramagnetic impurity in tetraaqua-di(nicotinamide) Zn(II)-saccharinates single crystals [Zn(nic)2(H2O)4](sac)2, have been investigated at ambient temperature. The detailed EPR analysis shows the only one site and the copper ion entered the lattice substitutionally in place of Zn(II). The spin-Hamiltonian parameters were obtained from the single crystal EPR analysis. By using the EPR data, molecular bonding coefficient and the Fermi contact interaction terms have been evaluated. Superhyperfine splittings were observed.     

An ultra-sensitive and colorimetric sensor for copper and iron based on glutathione-functionalized gold nanoclusters

Here, we report an ultra-sensitive and colorimetric sensor for the detection of Fe³⁺ or Cu²⁺ successively using glutathione-functionalized Au nanoclusters (GSH-AuNCs). For GSH-AuNCs can catalytically oxidize peroxidase substrates, such as 3, 3′, 5, 5′-tetramethylbenzidine (TMB), colored products are formed in the presence of H₂O₂. While upon the addition of Fe³⁺ or Cu²⁺ into the GSH-AuNCs-TMB-H₂O₂ system, diverse color and absorbance of the system was obtained due to the self oxidation of Fe³⁺ and the inhibition of peroxidase-like activity of GSH-AuNCs. With the introduction of ethylene diamine tetraacetic acid (EDTA) or ammonium fluoride (NH₄F) to GSH-AuNCs-TMB-H₂O₂+Cu²⁺ system or GSH-AuNCs-TMB-H₂O₂+Fe³⁺ system respectively, a restoration of color and absorbance of system was realized. On the basis of above phenomenon, a colorimetric and quantitative approach for detecting Fe³⁺ and Cu²⁺ was developed with detection limit of 1.25 × 10⁻⁹ M and 1.25 × 10⁻¹⁰ M respectively. Moreover, the concentration of Fe³⁺ and Cu²⁺ in human serums was also accurate quantified by this method. So this design strategy realized the simple and simultaneous detection of Fe³⁺ and Cu²⁺, suggesting significant potential in clinical diagnosis.     

Concentration and Separation of Ni2+, Cu2+ and Co2+ by Back Extraction Chromatography Using Lix 64N and Cationic Resins

Abstract

This paper describes the method for the concentration of Cu²⁺ by liquid-liquid extraction using Lix 64N solutions in kerosene, followed by back extraction chromatography.

It consists of a pass of the organic phase through columns filled with cationic resins (H⁺) which contains only the water surrounding the grains.

The effect of the pH of the aqueous film surrounding the resin grains on the capacity of Vionit CS-3 (-SO₃H) and Vionit CM-14 (-SH) has been established.

The loading curves of these resins have been drawn, as the optimum pH of the aqueous film and the resin capacities shown to increase in the order -SH < -SO₃H.

The effect of the flow-rate on the loading and the optimum elution conditions have been also determined.

A mechanism for the ion-exchange process is proposed.     

ABSORPTIVE IONOPHORES FOR Fe3+ CATION BY PARENT CALIX[n]ARENES

The absorption of Fe³⁺ ion from the aqueous phase to the solid phase was carried out by using p-tert-butyl calix[6]arene (L₁), calix[6]arene (L₂), p-tert-butyl calix[8]arene (L₃), and calix[8]arene (L₄). The effect of varying pH upon the absorption capability of parent calixarenes was examined. It was found that the compounds (L₁, L₂, L₃, and L₄) showed the highest extractability toward Fe³⁺ ion at 4.5–5.4. The calixarene L₂ shows a strong binding ability to Fe³⁺ ion. Based on the continuous variation method, calixarene L₂ formed 1:1 complex with Fe³⁺ ion.