Investigation on Preparation and Anti-icing Performance of Superhydrophobic Surface on Aluminum Conductor

Aluminum is widely used in transmission lines, and the accumulation of ice on aluminum conductor may inflict serious damage such as tower collapse and power failure.In this study, super-hydrophobic surface (SHS) on aluminum conductor with micro-nanostructure was fabricated using the preferential etching principle of crystal defects.The surface microstructure and wettability were investigated by scanning electron microscope and contact angle measurement, respectively.The icing progress was observed with a self-made icing experiment platform at different environment temperature.The results showed that, due to jumping and rolling down of coalesced droplets from SHS of aluminum conductor at low temperature, the formation of icing on SHS could be delayed.Dynamic icing experiment indicated that SHS on aluminum conductor could restrain the formation of icing in certain temperature range, but could not exert influence on the accumulation of icing.This study offers new insight into understanding the anti-icing performance of actual aluminum conductor.     

Surface Anchoring Stabilized High Strength Disclinations in Smectic C Phase of a Schiff-base Liquid Crystal

The observation of disclination cores of high strength S= -2, -3, -4, -5, -6, -7, -8 in a smectic C phase of Schiff-base type liquid crystal (LC) is reported. The results of polarizing optical microscope (POM), differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) prove that the sample exhibits smectic C phase. It is suggested that the formation of the high strength disclination is mainly ascribed to the stronger anchoring of LC molecules on the substrate due to the formation of hydrogen bonds between the pendent hydroxyl of the LC molecule and the substrate.     

Novel techniques of PDLC film preparation furnishing manifold properties in a single device

Three novel techniques of polymer dispersed liquid crystal (PDLC) film preparation have been proposed to obtain/induce systematically varying manifold properties in a single device. These three techniques were used to prepare ‘wedge-shaped’, ‘multi-channelled’ and ‘grating type’ PDLC films. Arrangement and configuration of liquid crystal (LC) microstructures inside these PDLC films, which were conveniently divided into different zones, have been investigated using a polarising optical microscope (POM) and scanning electron microscope (SEM). POM images indicate a predominant bipolar structure in all zones of different types of PDLC films but with varying size and density. Further, the electro-optical (EO) properties of PDLC films for different zones have different morphological characteristics as indicated (observed) in POM and SEM images and were dependent on LC droplet shape, size and distribution. Also different zones show different absorbance/transmittance characteristics in the visible range. Thus, our study proposes a single device with manifold properties. Also, the desired properties can be obtained by selecting the suitable zone from the PDLC composite film.     

离子液体/聚偏氟乙烯纳米纤维的防结冰性能

通过静电纺丝方法制备了掺杂离子液体([BMIM][PF₆])的聚偏氟乙烯(PVDF)纳米纤维. 研究结果表明, [BMIM][PF₆]与PVDF具有相互作用, 并可促进PVDF形成β相晶体. 在溶剂挥发后, 离子液体存在于PVDF纳米纤维的表面. 纳米纤维中的离子液体含量对复合纳米纤维的表面形态和润湿性具有显著影响. 通过离子液体的引入, 可有效推迟水滴在纳米纤维表面的结冰时间, 降低水滴的结晶温度, 并且降低冰黏附强度. 研究结果显示含有10%[BMIM][PF₆]的PVDF纳米纤维疏水性最高, 并具有优异的防结冰性质.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

新型弯曲形双偶氮苯类液晶合成及光致异构性能研究

弯曲形偶氮苯液晶由于其偶氮键独特的光致可逆异构化性能,已成为光电子信息材料研究的热门课题,但光响应速度慢已成为制约其发展的关键因素.目前报道的弯曲型偶氮类液晶化合物的偶氮键都距离中心核较远的位置,光致异构的响应时间较长,大都在分钟以上,不利于光敏器件应用研究.本工作试图以2-甲基-1,3-间苯二胺为中心核,将偶氮键紧挨中心核两边,末端为直链烷基,设计合成了一系列新型弯曲形双偶氮苯类液晶化合物,以期缩短光响应时间.通过IR, 1H NMR, 13C NMR和ICP-MS光谱鉴定这些化合物的分子结构,经差示扫描量热仪(DSC)和偏光显微镜(POM)测定其液晶相变温度和相态织构;并通过测定2-甲基-1,3-双(4-((4-庚基苯基)酯基)-1-(E)-偶氮苯基)苯(2c)的紫外-可见光的吸收光谱研究其光致异构化性能,通过UV-Vis光谱仪和偏光显微镜(POM)测定其液晶化合物以及掺杂向列相液晶材料的光致异构现象和响应时间.实验结果表明,所有设计合成的弯曲形双偶氮苯类液晶化合物均具有近晶相相态,且相态温度范围较宽,当近晶相态化合物2c掺杂到向列相混合液晶中时,其光致异构响应时间为2~3 s,在日光下液晶态恢复时间为3~4s,在乙酸乙酯稀溶液中时10s可达到光稳态.说明这类弯曲形双偶氮液晶化合物具有较快的光致异构响应速度.     

A room temperature discotic mesogenic dyad based-on triphenylene and pentaalkynylbenzene

A facile synthesis of a novel room temperature discotic mesogenic dyad based on triphenylene and pentaalkynylbenzene linked via flexible alkyl spacer is reported. The thermotropic liquid crystalline (LC) property of the compound was investigated by polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffractometry (XRD). The LC property of the dyad was further manipulated by preparing charge transfer (CT) complexes with trinitrofluorenone (TNF). The compound self-assembles into a columnar hexagonal mesophase and exhibits an excellent fluorescent emission property which has possible potential for various opto-electronic applications.     

Effect of 1-hexanol on the phase behavior of SDS/CTAB/NaBr/H2O system

Abstract

The influence of 1-hexanol on the phase behavior of sodium dodecyl sulfate (SDS)/cetyltrimethyl ammonium bromide (CTAB)/NaBr/H₂O system has been systematically investigated in this paper. The results showed 1-hexanol effectively dissolved the precipitate formed by the CTAB and SDS surfactants, while liquid crystal (LC) and aqueous two phase system (ATPS) were formed in a wider range. When the molar ratio of 1-hexanol to surfactant is higher than 1, the precipitation in the system disappeared completely and was transformed into ATPS and LC, indicating that alcohol inserted at least evenly between every two surfactant molecules and hence effectively weakened the electrostatic interaction between the anionic and cationic surfactants and limited the formation of precipitation. Polarizing microscope (POM) with crossed polarizers was employed to investigate the textures of liquid crystals. It was shown that the existence of lamellar LC was confirmed by “Maltese crosses” textures. Additionally, we showed that the thermal stability of LC was promising. The ATPS and LC regions remained stable and changed slightly when the temperature was increased from 40 to 70?°C. The results indicated that ATPS and LC of the system were quiet resistant to temperature with the addition of 1-hexanol.     

Synthesis and characterisation of a novel Y-shaped liquid crystalline epoxy and its effect on isotropic epoxy resin

ABSTRACT

A novel Y-shaped liquid crystalline epoxy with a rigid core with three flexible liquid crystalline arms (ETTPM) was synthesised and its structure was characterised by Fourier transform infrared spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. It was analysed and observed by differential scanning calorimetry, X-ray diffraction and polarised optical microscopy (POM) that the liquid crystal phase was stable on the temperature range of 107.8°C. In particular, an unusual transition phenomenon of liquid crystal phases was observed. Modified epoxy-resin-cured products were prepared using ETTPM, epoxy resin E51 and 4,4-diaminodiphenyl methane. The liquid crystalline domains in cured products were observed by researching their scattering effect on laser. Mechanical tests showed that ETTPM was effective for the mechanical properties improvement of epoxy-resin-cured products, as demonstrated in the improvement of impact strength, tensile strength and tensile elasticity modulus. The impact fracture cross-sections and surface morphologies were studied further by POM and scanning electron microscopy (SEM). Crack deformation, crack split and notable plastic deformations were found in modified epoxy-resin-cured products, and these factors played important roles in improving the impact strength.     

荧光液晶分子α-氰基二苯乙烯衍生物的合成与光学性质

合成了液晶化合物α-氰基二苯乙烯衍生物(Z)-2-(4-十二烷基氨基苯基)-3-(4-十二烷氧基苯基)丙烯腈（T3）,化合物T3与其同系物(Z)-2-(4-氨基苯基)-3-(4-十二烷氧基苯基)丙烯腈（T2）的浓溶液和固体态在蓝绿光波段均有强的荧光发射。 热重分析数据表明,两个化合物均有好的热稳定性。 利用差式扫描量热分析和偏光显微镜研究了化合物T3的液晶性质,同时借助粉末XRD分析化合物T3的分子间排列方式,表明化合物T3形成近晶相液晶。     

Condensation and freezing of droplets on superhydrophobic surfaces

Superhydrophobic coatings are reported as promising candidates for anti-icing applications. Various studies have shown that as well as having ultra water repellency the surfaces have reduced ice adhesion and can delay water freezing. However, the structure or texture (roughness) of the superhydrophobic surface is subject to degradation during the thermocycling or wetting process. This degradation can impair the superhydrophobicity and the icephobicity of those coatings. In this review, a brief overview of the process of droplet freezing on superhydrophobic coatings is presented with respect to their potential in anti-icing applications. To support this discussion, new data is presented about the condensation of water onto physically decorated substrates, and the associated freezing process which impacts on the freezing of macroscopic droplets on the surface.     

High-temperature chiral nematic phase in naphthalene and cholesterol derivative liquid crystal: characterisation and dielectric relaxation study

In this article, we report the synthesis of the naphthalene and cholesterol derivative 2-(cholesterol-n-decanoate)-6-(heptyloxy benzoate) naphthalene (2CD6HBN) liquid crystal (LC) having chiral nematic (N*) mesophase. The synthesised mesophase has been characterised using polarising optical microscopy (POM) and differential scanning calorimetric (DSC) study. The presence of the rigid and less polarisable cores causes a higher N*-Iso transition temperature. The relaxation phenomenon of the present LC sample was analysed by the dielectric relaxation spectroscopic study. The dielectric properties, electrical conductivity and the relaxation time were observed as a function of the temperature. The relaxation time follows the first-order exponential decay–type equation. The properties of the LC sample have also been correlated with the structure of the compound.     

Effect of anti-parallel and twisted alignment techniques on various propertiesof polymer stabilised liquid crystal (PSLC) films

Thin composite films consisting of liquid crystal (LC) domains surrounded by polymer networks, termed as polymer stabilised liquid crystals (PSLCs), were prepared by photo-polymerisation of a pre-polymer dissolved in LC. Four composite films were prepared with different rubbing directions and with and without electric field during photo-polymerisation. Morphological characterisation carried our using a polarising optical microscope (POM) and a scanning electron microscope (SEM) reveal significant changes in LC domain morphology and associated polymer networks with the application of electric field during the fabrication of the films. The electro-optic (EO) properties of PSLC films placed between two crossed polarisers were studied using a He–Ne laser under an action of externally applied electric field. It was found that the PSLC film with twisted alignment and polymerised in the presence of electric field showed better EO properties than other films. Transmittance obtained by EO studies was verified with absorbance studies using a Ultraviolet-Visible spectrophotometer. The dielectric behaviour of PSLC films in the frequency range 20–20 MHz was investigated using a precision impedance analyser. The obtained data were modelled using Debye and Cole–Cole methods to calculate relaxation time and distribution parameter. The relaxation time calculated through the Cole–Cole model is in agreement with response time.     

Insight into polymorphism of the ethosuximide (ETX)

Rich polymorphism of ethosuximide compound (ETX) is described in detail using complementary thermal analysis methods. The paper shows as well the results of differential scanning calorimetry (DSC), of polarizing microscope observations (POM) and of X-ray diffraction (XRD) measurements taken using horizontal rotating capillary method. Molecular structure of ethosuximide favors appearance of a conformationally disordered (CONDIS) crystal phase CrI in its polymorphism. Ethosuximide is a good glass former, and glass of the CrI phase was observed even for 5 °C min^?1 rate of cooling. Moreover, monotropic plastic crystal CrII phase was observed during heating above the CrI temperature range.     

Microfluidic formation of pH responsive 5CB droplets decorated with PAA-b-LCP

We are reporting for the first time the pH responsiveness of liquid crystal (LC) microdroplets decorated with an amphiphilic block copolymer of PAA-b-LCP. We successfully demonstrated the adsorption of block copolymer on LC droplets by fluorescence microscopy and pH response to the radial-to-bipolar orientational change of the LC droplets by changing pH from 12 to 2 through the polarized optical microscope (POM). We believe that our results may pave the way for the generation of monodisperse droplets decorated by various amphiphilic block copolymers which respond to several kinds of the external stimuli. These developments may be important for potential applications of the LC droplets in sensing and encapsulation fields.     

Synthesis and characterization of novel epoxy monomers and liquid crystal thermosets

Four new epoxy monomers have been synthesized and characterized as part of a program to prepare novel liquid crystal thermoset (LCT) materials. Three of the new epoxy monomers contained a biphenyl mesogen and were not liquid crystalline (LC). The remaining epoxy monomer, which contained a 1,4-dibenzoyloxybenzene mesogen, was synthesized in an overall yield of 30% and displayed a broad (83°C) nematic liquid crystalline phase. The new liquid crystalline epoxy monomer was cured at 120°C and postcured at 175°C with a stoichiometric amount of 1,4-phenylenediamine. The thermal transitions of the resulting LCT were studied by differential scanning calorimetry (DSC), polarized light optical microscopy (POM), thermomechanical analysis (TMA), and wide angle x-ray diffraction (WAXD) as a function of cure time and temperature. A process characterization diagram was constructed which shows that LCTs based on this new LC monomer can be processed in the liquid crystalline phase over a broad range of times and temperatures. Qualitative agreement with previous epoxy LCT results was found, as LCT's with smectic phases and without clearing temperatures were observed at long cure times (high crosslink densities), whereas nematic phases with clearing temperatures predominated in networks at short cure times (low crosslink densities). © 1993 John Wiley & Sons, Inc.     

Thin-film polymerization and characterization of Sumitomo's Sumikasuper®-type liquid crystalline polymers

Using the thin film polymerization approach, we have studied the texture evolution when synthesizing a novel liquid crystalline polymer (LCP) system based on Sumikasuper^® LCPs. The main monomers used were p-acetoxybenzoic acid (ABA), 4,4'-biphenol (BP), isophthalic acid (IA), phthalic acid (PA) and terephthalic acid (TA). Polarizing optical microscopy (POM), FTIR, X-ray diffraction (XRD) and atomic force microscopy (AFM) were employed to study the thin film polymerization process and characterize the products. The generation and evolution of liquid crystal phases were monitored; the results revealed that there exists a composition range for the monomers to react and form liquid crystal materials. The critical temperature for LC formation in ABA/BP/IA system decreased with increasing ABA content. FTIR results confirmed the formation of polymers. AFM investigation suggested a similar process of morphological change to that observed using POM. An increasing surface roughness of the thin films with the progress of polymerization was also obtained from AFM analysis. A nematic LC texture of the polymer system was suggested by XRD examination. Results obtained by replacing BP with acetylated BP, and by conducting polymerization using two-monomer systems, suggest that BP units are included in polymers obtained by the thin film polymerization method.     

1-((12-Bromododecyl)oxy)-4-((4-(4-pentylcyclohexyl)phenyl)ethynyl) benzene: Liquid crystal with aggregation-induced emission characteristics

The luminescent liquid crystals (LLCs) are expected to solve the conflicts between the aggregation caused quenching and the requirement of aggregation or self-organization for LCs. Herein, we developed a new strategy of applying aggregation-induced emission (AIE) phenomenon to the molecular design of LCs towards LLCs. In this report, a calamitic liquid crystal based on tolane with AIE characteristics was successfully synthesized and the chemical structure was characterized by 1H, 13C NMR, and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) high-resolution mass spectra. The fluorescence behavior was studied by fluorescence spectroscopy and the liquid crystal phase behaviors were investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM). The crystal structure was obtained by X-ray diffraction crystallography with P1 space group. Results demonstrated that the sample was AIE active and the LC phases sequence during cooling was nematic, smectic C and smectic B phase.     

Synthesis and evaluation of dinaphthylacetylene nematic liquid crystals for high-birefringence materials

We synthesised 1,2-bis(6-alkoxy-2-naphthyl)acetylene as a new dinaphthylacetylene liquid crystal (LC) compound with alkoxy tails of length m (DNA–OCm) and characterised their phase behaviour by polarising optical microscopy and differential scanning calorimetry, where all compounds exhibited a nematic phase. Also, we measured the actual, and not extrapolated, Δn values of this target compound, and our results show the birefringence potential of the pure LC compound. They have high birefringence values, with the highest value of approximately 0.5 obtained for DNA–OC2 at 550 nm at 10°C above the nematic?crystal transition temperature.     

Synthesis of a main-chain liquid crystalline azo-polymer via “click” chemistry

A main-chain liquid crystalline azo-polymer (BPHCHA) was prepared through the copper-catalyzed “click” reaction between the alkyne group on 4,4′-bis((6-(propargyloxy)hexyl)oxy) biphenyl (BPH) and the azide group on 4-(6-azidohexyloxy)carbonyl-4′-(6′-azidohexyloxy) azobenzene (AHCHA). The “click” reaction was confirmed by FT-IR, ¹H NMR, and GPC studies. The phase transition behavior of BPH, AHCHA, and the resulting azo-polymer BPHCHA was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). AHCHA and BPHCHA exhibited mesomorphic behavior, while BPH is a crystalline compound. A liquid crystalline phase from 39 to 69 °C for AHCHA upon heating was observed under POM. Schlieren texture was observed at 130 °C for BPHCHA on cooling from 150 °C and annealed at 130 °C for 15 min. Moreover, DSC and POM studies showed that BPHCHA exhibited monotropic mesomorphic behavior.