A simple and facile method for regio- and stereoselective bromoformyloxylation and bromoacetoxylation of olefins using NH4Br and oxone®

A mild and efficient protocol for the preparation of bromoformates as well as bromoacetates from olefins using NH₄Br and oxone® in nucleophile sources (DMF or DMA) without employing catalyst at room temperature is described. This method is facile, environmentally friendly and cost effective. A variety of terminal, internal and cyclic alkenes reacted smoothly to give the corresponding bromoformate and acetate products in good to excellent yields. Moreover, 1,2-disubstituted olefins provided moderate to excellent diastereoselectivity.     

The compounds KAs4O6 X (X=Cl,Br, I) and NH4As4O6 X (X=Br,I): Hydrothermal syntheses and structure determinations

The crystal structures of five isotypic hexagonal compounds with general formulaMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; space group: P622;Z=1] were determined from 370 single crystal X-ray data and refined toR values <0.05. The structure type is characterized by neutral charged [As₂O₃] sheets arranged parallel (00.1). The As atoms of neighbouring two sheets point to each other and the sheets are combined by interlayeredM andX atoms, respectively. TheM atoms are coordinated to twelve oxygen atoms, theX atoms are coordinated to twelve arsenic atoms. In both cases the coordination polyhedron is a hexagonal prism. The compounds were synthesized by thermal treatments of cubic As₂O₃ and potassium or ammonium haloids in a saturated aqueous solution of potassium acetate resp. ammonia [500 K, saturation vapour pressure].

---

Die Verbindungen KAs₄O₆ X (X=Cl, Br, I) und NH₄As₄O₆ X (X=Br, I): Hydrothermalsynthese und Strukturbestimmung

Zusammenfassung Die Kristallstrukturen der fünf isotypen hexagonalen Verbindungen mit der allgemeinen FormelMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; Raumgruppe: P622;Z=1] wurden anhand von 370 Einkristall-Röntgendaten bestimmt und aufR-Werte <0.05 verfeinert. Der Strukturtyp ist ausgezeichnet durch neutrale [As₂O₃]-Schichten, die parallel (00.1) angeordnet sind. Die As-Atome zweier benachbarter Schichten weisen jeweils aufeinander zu, und die Schichten selbst werden durch zwischengelagerteM- bzw.X-Atome verbunden. DieM-Atome werden jeweils von zwölf O-Atomen, dieX-Atome von zwölf As-Atomen umgeben. Das Koordinationspolyeder ist in beiden Fällen ein hexagonales Primsa. Die einzelnen Verbindungen wurden unter Hydrothermalbedingungen aus kubischem As₂O₃ und dem jeweiligen Kalium- oder Ammoniumhalogenid in einer gesättigten wäßrigen Lösung von Kaliumacetat bzw. Ammoniak synthetisiert (500 K, Sättigungsdampfdruck).

     

The thermal decomposition of (NH4)[VO(O2)2(NH3)]

The compound, (NH₄)[VO(O₂)₂(NH₃)], thermally decomposes to ammonium metavanadate, which then decomposes to vanadium pentoxide. Using a heating rate of 5 deg·min^–1, the first decomposition step occurs between 74° and 102°C. The transformation degree dependence of the activation energy (-E) is shown to follow a decreasing convex form, indicating that the first decomposition step is a complex reaction with a change in the limiting stage of the reaction. Infrared spectra indicated that the decomposition proceeds via the gradual reduction of the ratio of the (NH₄)₂O to V₂O₅ units from the original 11 ratio in ammonium metavanadate, which may be written as (NH₄)₂O·V₂O₅, to V₂O₅.The assistance of Professor A. M. Heyns (University of Pretoria) and Professor K. L. Range (University of Regensburg) is gratefully acknowledged as well as the financial assistance of the University of Pretoria and the FRD.     

Syntheses and crystal structures of NH4Ag2(AsS2)3 and (NH4)5Ag16(AsS4)7 with a discussion of (NH4)Sx polyhedra

Summary The atomic arrangements within the structures of NH₄Ag₂(AsS₂)₃ [a=9.557(2),b=7.414(2),c=16.29(1) Å; =91.30(5)°; space group P2₁/n;R(F)=0.042] and (NH₄)₅Ag₁₆(AsS₄)₇ [a=64.49(6),b=6.471(2),c=12.806(4) Å; =95.47(5)°; space group Cc;R(F)=0.073] were determined from single crystal X-ray data. In these two compounds the coordination spheres of the Ag atoms are quite different. In NH₄Ag₂(AsS₂)₃, the Ag atoms exhibit a [2+2]- and a [3+1]-coordination to S atoms up to 3.3 Å and with Ag atom neighbours at 2.93 Å and 3.05 Å respectively. In (NH₄)₅Ag₁₆(AsS₄)₇, the Ag atoms are — with one exception- [4] coordinated (Ag-S<3.3 Å) and the distances to further Ag atom neighbours are greater than 3.1 Å. NH₄Ag₂(AsS₂)₃ represents an ordered cyclo-thioarsenate(III) with three-membered As₃S₆ rings, (NH₄)₅Ag₁₆(AsS₄)₇ a neso-thioarsenate(V) with two split Ag atom positions. Both compounds were synthesized under moderate hydrothermal conditions.

---

Synthesen und Kristallstrukturen von NH₄Ag₂(AsS₂)₃ und (NH₄)₅Ag₁₆(AsS₄)₇ mit einer Diskussion über (NH₄)S_x Polyeder

Zusammenfassung Die Atomanordnungen in den Strukturen von NH₄Ag₂(AsS₂)₃ [a=9.557(2),b=7.414(2),c=16.29(1) Å; =91.30(5)°; Raumgruppe P2₁/n;R(F)=0.042] und (NH₄)₅Ag₁₆(AsS₄)₇ [a=64.49(6),b=6.471(2),c=12.806(4) Å; =95.47(5)°; Raumgruppe Cc;R(F)=0.073] wurden anhand von röntgenographischen Einkristalldaten bestimmt. In diesen beiden Verbindungen sind die Koordinationsverhältnisse um die Ag-Atome sehr unterschiedlich. In NH₄Ag₂(AsS₂)₃ besitzen die Ag-Atome bis 3.3 Å eine [2+2]- und [3+1]-Koordination durch S-Atome mit weiteren Ag-Atomen bei 2.93 Å und 3.05 Å. In (NH₄)₅Ag₁₆(AsS₄)₇ sind die Ag-Atome mit einer Ausnahme [4]-koordiniert (Ag-S < 3.3 Å), und die Abstände zu weiteren Ag-Atomen sind größer als 3.1 Å. NH₄Ag₂(AsS₂)₃ stellt ein geordnetes Cyclothioarsenat(III) mit dreigliedrigen As₃S₆-Ringen dar, (NH₄)₅Ag₁₆(AsS₄)₇ ein Nesothioarsenat (V) mit zwei aufgespaltenen Ag-Positionen. Beide Verbindungen wurden unter mäßigen Hydrothermalbedingungen synthetisiert.

     

ZnFe2O4 nanoparticles: A green and recyclable magnetic catalyst for fast and regioselective conversion of epoxides to vicinal hydroxythiocyanates using NH4SCN under solvent-free conditions

ZnFe₂O₄ nanoparticles were synthesized and used as recyclable magnetic catalyst in the solvent-free conversion of different epoxides to vicinal hydroxythiocyanates with NH₄SCN at room temperature. The reactions were carried out by grinding in a mortar with perfect regioselectivity within short times (2-25 min) and with high to excellent yields (75–95%). The nanocatalyst was separated easily using an external magnet and reused for four consecutive cycles without any noticeable loss of efficiency or magnetic property.     

Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Thermal behaviour of NH4ReO4 supported on inorganic gels

Results of TG and DTA studies as well as an analysis of the liberated gas products have led us to recognize differences in the mechanisms of transformations taking place in the systems NH₄ReO₄/Al₂O₃-SiO₂ (25 wt% SiO₂ and NH₄ReO₄/Al₂O₃ containing 1.1, 3.3 and 3.3, 9.9, 17.8 wt% NH₄ReO₄. Thermal decomposition of NH₄ReO₄ on the supports used begins with release of ammonia, which is strongly bound with the surface in the system of 3.3 wt% NH₄ReO₄/Al₂O₃, and undergoes oxidation to nitrogen oxides in the air atmosphere. In the other systems studied, the process of ammonia release starts already at 473 K and ammonia does not get oxidized. Moreover, it has been established that ammonia perrhenate supported on the surface of Al₂O₃-SiO₂ in the amount of 1.1 or 3.3 wt% undergoes partial thermal decomposition to ReO₂ which is further oxidized in the air atmosphere. As follows from the thermal studies as well as the measurements of activity in a reaction of 1-hexene metathesis, the active centres of the reaction of olefin metathesis are formed on the surface of the studied systems after their calcination at 473 K.     

Gases Released During the Conversion of NH4Zr2(PO4)3 to HZr2(PO4)3

Gases released during the conversion of NH₄Zr₂(PO₄)₃ to HZr₂(PO₄)₃ were identified using an apparatus in which gases released from a sample placed in a thermogravimetric analyzer were directly introduced to a gas cell of an IR spectrometer. Such acidic gases as N₂O and NO were detected besides the basic NH₃ gas, and their formation mechanism was discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Raman frequency shifts of an internal mode near the tricritical and second order phase transitions in NH4Cl

This study gives our analysis for the frequency shifts of the v2 (1708 cm-1) Raman mode in NH4Cl close to its tricritical (P=1.6 kbar) and second order (P=2.8 kbar) phase transitions. From our analysis, we extract the values of the critical exponent which describes the critical behavior of the Raman frequency shifts for this internal mode for the pressure conditions studied in NH4Cl. Our exponent value of alpha approximately 0.2 for the tricritical phase transition is close to the values of 1/16 (TTc) for the specific heat, predicted from a 3D Ising model. Our exponent values for the second order phase transition (P=2.8 kbar) for TTc are comparable with those reported in earlier studies.     

Enthalpies of crystallization of equilibrium solid phases occurring in the system K2SO4-(NH4)2SO4-H2O at 298.15 K

The concentration dependences of the differential enthalpies of solution were measured along several crystallization paths in the above-mentioned system, and the enthalpies of crystallization of mixed crystals occurring as a stable solid phase in the system were calculated on this basis. The obtained results confirmed the existence of a region of breaking continuity in the equilibrium solid phases.

---

Zusammenfassung Für die obengennanten Systeme wurden, mehrere Kristallisationsradien entlang, die Messungen der Konzentrationsabhängigkeiten durchgeführt, die es unter differentiellen Lösungsenthalpien gibt. Auf dieses Grundlage wurden die Kristallisationenthalpien von Mischkristallen, die als stabile feste Phase vorkommen, bestimmt.Die erreichten Ergebnisse bestätigen die Tatsache, daß ein unterbrochenes Gebiet in den gleichgewichten festen Phasen vorkommt.

     

Hypervalent iodine oxidation of phenol derivatives using a catalytic amount of 4-iodophenoxyacetic acid and Oxone as a co-oxidant

Reaction of p-substituted phenols 2 with a catalytic amount of 4-iodophenoxyacetic acid (1) and Oxone^® as a co-oxidant in tetrahydrofuran (THF) or 1,4-dioxane-water gave the corresponding p-quinols 3 in excellent yields. Reaction of p-dialkoxyarenes 4 in 2,2,2-trifluoroethanol-water gave the corresponding p-quinones 5 in excellent yield without purification. These reactions provide efficient and practical methods for the preparation of p-quinols and p-quinones from p-substituted phenols and p-dialkoxyarenes, respectively. This quinone synthesis was applied to synthesis of blattellaquinone (13), the sex pheromone of the German cockroach Blattella germanica.     

Pippard relations applied to the lambda-phase transition in NH4Br

We establish here a linear variation of the specific heat C(P) with the frequency shifts (1/nu)( partial differentialnu/ partial differentialT)(P) close to the lambda-phase transition in NH(4)Br (T(lambda)=234K). This linear relationship is based on our spectroscopically modified Pippard relations. For this verification of our relations, we use our observed Raman frequencies of the lattice mode of nu(7) (56cm(-1)) and the internal mode of nu(2) (1684cm(-1)) in the NH(4)Br crystalline system. Our study given here indicates that the thermodynamic data can be obtained from the measured frequencies.     

Incorporation of cesium ion from CsNO3 into NH4Zr2(PO4)3 studied by TG-IR spectroscopy and powder XRD

The incorporation mechanism of Cs⁺ ions from CsNO₃ into NH₄Zr₂(PO₄)₃ was studied on a mixture of CsNO₃ and NH₄Zr₂(PO₄)₃ by powder X-ray diffraction analysis and by monitoring off-gases released from the mixture upon heating with a thermogravimetry analyzer connected to an infrared spectrometer. With increasing temperature, the decomposition of CsNO₃ first started, followed by the conversion of NH₄Zr₂(PO₄)₃ to HZr₂(PO₄)₃ with the release of NH₃. At around 500°C, the Cs Zr₂(PO₄)₃ phase started to appear as a result of the H⁺/Cs⁺ ion exchange. No Cs⁺ ion loss was observed at thermal treatment temperatures of 900°C and lower.     

Adsorption-energetic and IR spectroscopic studies of NH4 natrolite

The ammonium form of natural zeolite, natrolite, obtained by vapor phase ion exchange is similar to calcium-containing zeolites of the natrolite group in its de- and rehydration characteristics and the heats of immersion in water. The adsorption capacity and the heat of immersion in water are maximum after evacuation of the zeolite at 200 °C. The irreversible sintering of NH₄ natrolite occurs above 200 °C (up to 45% at 500 °C), accompanied by the formation of hydroxyl groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–361, February, 1998.     

Viscosity of aqueous NH4Cl and tracer diffusion coefficients of ions,water and non-electrolytes in aqueous NH4Cl,KI, and MgCl2 at 25°C

Viscosities for aqueous NH₄Cl and tracer diffusion coefficients for²²Na⁺,³⁶Cl^–, HTO, and CH₃OH, acetone and dimethylformamide (all¹⁴C-labelled) in NH₄Cl supporting electrolyte are reported for 25°, together with tracer diffusion coefficients for²²Na⁺,³⁶Cl^–, and¹⁴CH₃OH in 1M KI, and for¹⁴CH₃OH in 1M MgCl₂. The diffusion coefficient of HTO in NH₄Cl solutions is slightly larger, for most of the concentration range investigated (0.05 to 4.5 M), than the value for pure water and is almost unaffected by the supporting electrolyte up to about 4M. Similar behavior is shown by CH₃OH, acetone and dimethylformamide in NH₄Cl solutions. Onsager limiting law behavior is approached by Cl^– at NH₄Cl concentrations in the 0.05–0.1M region but at much lower concentrations by Na⁺.     

Regioselective ortho-hydroxylation of aryl moiety of 2-arylpyridines using Pd(OAc)2/Oxone in PEG-3400/tert-BuOH

Regioselective ortho-hydroxylation of aryl moiety of 2-arylpyridines was carried out under the influence of Pd(OAc)₂/Oxone (potassium peroxymonosulfate) in PEG-3400/t-BuOH in moderate yields.     

Determination of cadmium, copper and lead in soils, sediments and sea water samples by ETAAS using a Sc + Pd + NH(4)NO(3) chemical modifier

Cadmium, copper and lead in soils, sediments and spiked sea water samples have been determined by electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background corrector using NH₄NO₃, Sc, Pd, Sc + NH₄NO₃, Pd + NH₄NO₃, Sc + Pd and Sc + Pd + NH₄NO₃ as chemical modifiers. A comprehensive comparison was made among the modifiers and without modifier in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations. Sc + Pd + NH₄NO₃ modifier mixture was found to be preferable for the determination of analytes in soil and sediment certified and standard reference materials, and sea water samples because it increased the pyrolysis temperature up to 900 °C for Cd, 1350 °C for Cu and 1300 °C for Pb. Optimum masses of mixed modifier components found are 20 μg Sc + 4 μg Pd + 8 μg NH₄NO₃. Characteristic masses of Cd, Cu and Pb obtained are 0.6, 5.3 and 15.8 pg, respectively. The detection limits of Cd, Cu and Pb were found to be 0.08, 0.57 and 0.83 μg l⁻¹, respectively. Depending on the solid sample type, the percent recoveries were increased up to 103% for Cd, Cu and Pb by using the proposed modifier mixture. The accuracy of the determination of analytes in the sea water samples was also increased.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

A mild halogenation of pyrazoles using sodium halide salts and Oxone

A mild, inexpensive, and operationally simple pyrazole halogenation method utilizing Oxone and sodium halide salts is reported. This work documents 17 examples of alkyl, aryl, allyl, and benzyl substituted 4-chloro and 4-bromopyrazoles, obtained in up to 93% yield. Reactions are performed in water under ambient conditions and generation of organic byproducts is avoided.     

纳米CuO的制备及对NH4ClO4热分解的催化性能

研究了快速液相沉淀条件对纳米CuO结构和形貌的影响。并用热分析法考察了不同形貌的纳米CuO对高氯酸铵(AP)分解的催化作用。结果表明,当反应物Cu(NO₃)₂和NaOH的浓度均增大到1.00mol·L^-1或者反应介质乙醇和水的体积比增大到3∶1时,纳米CuO(111)晶面的XRD峰强度弱于其(111)晶面的XRD峰强度;用Na₂CO₃作沉淀剂可获得平均粒径11nm的球形CuO,但团聚严重,添加聚乙二醇(PEG)可改善其分散性。不同形貌的纳米CuO均能强烈催化AP的分解,其中分散性良好的球形纳米CuO,催化活性最强,可使AP的高温分解温度降低99.13℃,分解放热量由590.12J·g^-1增至1380J·g^-1。