Dielectric and electro-optical properties of a photosensitive liquid crystal

The temperature dependencies of the dielectric and electro-optical properties of a pure photo-ferroelectric liquid crystal have been investigated, in the chiral smectic C (SmC*) phase, with and without ultraviolet (UV) illumination. The SmC* dielectric Goldstone mode characteristics, the spontaneous polarization, the tilt angle and the rotational viscosity are affected by UV irradiation. Under increasing UV light intensities the dielectric strength Δ?_G increases whereas the relaxation frequency f_G , the spontaneous polarization P _s, the electro-optical rotational viscosity γ_eo and the tilt angle θ decrease. The twist elastic constant K ₃ and the Goldstone mode rotational viscosity γ_G of the studied compound are deduced from dielectric experimental results. Good agreement was found between both viscosities. The observed dielectric behaviours are controlled by the elastic constant and the rotational viscosity variations.     

Nematic liquid crystal gyroids as photonic crystals

ABSTRACT

We demonstrate nematic and cholesteric liquid crystal (LC) gyroids and show their photonic properties as photonic crystals by using numerical modelling. The LC gyroids are designed as composite optical materials, where we take one labyrinth of passages to be a solid dielectric, whereas the other (complementing) labyrinth of passages is taken to be filled by chiral or achiral nematic LC, with the intermediate gyroid surface imposing homeotropic (perpendicular) surface anchoring. The nematic inside the gyroid matrix is shown to exhibit a variety of possible orientational profiles which are characterised by complex networks of topological defects – from ordered, semi-ordered, to completely disordered. The diversity of possible nematic states is shown to lead to a rich structure of photonic bands, which can be tuned by the LC volume fraction and the cholesteric pitch, including control over full – direct and indirect – band gaps.     

Towards a new class of ferroelectric liquid crystal molecules for nonlinear optical applications

The synthesis of a new molecule specifically designed to exhibit both ferroelectric and nonlinear optical properties is presented. This molecule possesses an optically active phenyl sulphinic group, which introduces a dipole moment directly linked to the chromophore group, with a nitro group in the meta -position. The rest of the molecule comprises a tolane and a benzoate group. Such a structure results in an enantiotropic smectic C*-smectic A phase sequence in its polymorphism. A first measurement of the spontaneous polarization shows a high value. The polymorphism of the racemic homologous molecule possessing the nitro group in the ortho-position is also presented, and also shows the smectic C-smectic A phase sequence.     

Current topics in smectic liquid crystal research.

Interest in the smectic liquid-crystalline state of matter received a substantial boost with the discovery by Meyer in the mid-1970s that a chiral smectic C (SmC*) phase exhibits a spontaneous electric polarization, and with the subsequent demonstration by Clark and Lagerwall of the surface-stabilized SmC* ferroelectric liquid crystal at the beginning of the 1980s. Since then, chiral smectic phases and their plethora of polar effects have dominated the research in this field, which today has reached a mature state where the first commercial microdisplay applications are now shipping in millions-per-year quantities. In this Review we discuss some of the topics of highest interest in current smectic liquid crystal research, and address application-relevant research (de Vries-type tilting transitions without defect generation and high-tilt antiferroelectric liquid crystals with perfect dark state) as well as more curiosity-driven research (the nature and origin of the chiral smectic C subphases and their intermediate frustrated states between ferro- and antiferroelectricity).     

Ferroelectric liquid crystal composites based on the porous stretched polyethylene films

Electro-optically active polymer–liquid crystal composites based on ferroelectric liquid crystals and stretched porous polyethylene films were developed. The alignment of ferroelectric liquid crystals incorporated into the porous polyethylene films with average porous diameter of around 200 nm was observed and studied. It was shown experimentally that these samples containing ferroelectric liquid crystals are flexible electro-optical films exhibiting a saturation electric field near 2·10⁷ Vm^?1 and a response time of about 30 μs under the action of the saturation field. A simple theoretical model of ferroelectric liquid crystal molecules' complete reorientation in electric fields inside pores of the films has been proposed and confirmed experimentally.     

Enhancement of frequency modulation response time for polymer-dispersed liquid crystal

Through the ferroelectric nanoparticles of BaTiO₃ (BTO) doping, the response time for the frequency modulation of the polymer-dispersed liquid crystal (PDLC) was improved. The BTO-doped PDLC cells were prepared by polymerisation induced phase separation (PIPS) process using UV light. The capacitance of the PDLC composites was measured with an impedance analyzer in the frequency range of 100 Hz–1 MHz at 1 V. The dynamic signal for the response time of the PDLC devices was monitored through a digital oscilloscope. The electro-optical properties of the PDLC were found to strongly depend on the doped BTO concentration. The BTO doping caused a large increase in the capacitance. The dielectric constants were drastically decreased in the samples with rather low BTO doping ratio at a high frequency. No outstanding difference in the rising time of the LC was observed in the BTO-doped PDLC device, but the falling time was significantly decreased from 0.334 to 0.094 s. The present results imply that the nanoparticle-doping technology could improve the electro-optical performance of the PDLC requiring fast response and frequency modulation, such as optical modulators and PDLC-hybrid electroluminescence device for flexible electronic devices.     

Electro-optical properties of photo-aligned photonic ferroelectric liquid crystal fibres

Electro-optical and spectral studies of isotropic photonic crystal fibre (PCF) infiltrated with photo-aligned ferroelectric liquid crystal (FLC) under influence of external electric field are described. Desired alignment of FLC molecules is provided by generation of photo-aligning surface on the inner side of PCF structure. Propagation of light spectrum, as well as light attenuation have been investigated in details. Moreover, the electro-optical response times were measured and analysed.     

Reflective mode of deformed-helix ferroelectric liquid crystal cells for sensing applications

We present a detailed theoretical and experimental study of the reflectance response of a deformed-helix ferroelectric (DHF) liquid crystal (LC) cell to an applied voltage under cross-polarisers. Using a model based on the effective dielectric tensor approximation, we derive simple analytical formulas to design a LC cell with maximum modulation depth and optimal linearity of the electro-optical response intensity versus the electric field. Our experimental results show that the cell works at frequencies up to 10 kHz and exhibits excellent linearity, with a total harmonic distortion as low as ?70 dB. These findings suggest that DHF-LCs can be exploited to develop simple and accurate optical sensors.     

Optical studies of dynamic director configurations in ferroelectric liquid crystal devices

An investigation into the transmission spectrum of a ferroelectric liquid crystal device is undertaken. This is done both for an initial static state and during a switching process. Comparisons are made between experimental data and theoretical predictions. The dynamic internal director configurations in the device is shown to be consistent with a simple model during both monopolar and bipolar addressing pulses.     

Theory of nematic–smectic phase separation in thin twisted liquid crystal cells

Recently it has been shown experimentally by the authors that a highly twisted thin nematic cell at low temperatures can separate into a smectic A region in the middle of the cell surrounded by twisted nematic layers at the boundaries. In this case the twist is expelled into the nematic layers and the nematic–smectic A transition temperature is strongly depressed. We present a thermodynamic theory of such a phase transition in a twisted nematic cell, taking into account that the smectic A slab inside the nematic cell can be stable only if the decrease of free energy in the smectic region overcomes the increase in distortion energy of the twist deformation in the nematic layers plus the energy of the nematic–smectic A interface. In such a system the equilibrium thickness of the smectic A slab corresponds to the minimum of the total free energy of the whole cell, which includes all the bulk and surface contributions. Existing experimental data are at least qualitatively explained by the results of the present theory. This opens a unique possibility to study the properties of the nematic–smectic interface which is perpendicular to the smectic layers.     

Polymerizable hexacatenar liquid crystals containing a luminescent oligo(p-phenylenevinylene) core

Polymerizable hexacatenar mesogens containing a photo-active oligo(p-phenylenevinylene) core were successfully synthesized by replacing the traditional n-alkoxy tails on the molecules with polymerizable hydrocarbon tails containing terminal isoprenyl or 1,3-dienyl units. It was found that for this particular liquid crystal (LC) platform, the incorporation of conventional radical polymerizable groups such as acrylates in the tails was not conducive to the formation of thermotropic LC phases, presumably due to their polar nature. The resulting photoluminescent isoprenyl and 1,3-dienyl hexacatenar monomers were found to form columnar hexagonal phases at elevated temperatures (c. 45–75°C), as determined by powder X-ray diffraction. Unfortunately, photoinitiated radical polymerization studies revealed that the mesogens are susceptible to photodegradation in the LC state at elevated temperatures, resulting in the loss of both LC order and emission properties during photopolymerization. Thermally initiated radical polymerization in the absence of light, however, afforded effective crosslinking with retention of both LC order and the desired emission properties. The resulting crosslinked columnar hexagonal phases were found to exhibit emission maxima at nearly identical wavelengths, with comparable intensities relative to the unpolymerized starting materials. The effect of the different polymerizable groups on the mesogenic behaviour, polymerization characteristics, and emission properties of the hexacatenar compounds is presented.     

Integrated and topological liquid crystal photonics

This contribution is a personal view of the rapidly developing subfield of nematic colloids, with an emphasis on possible applications of these materials in future photonic microdevices. A brief overview of the most important phenomena, observed in the past decade in nematic colloids is given. It is explained why integrated photonics based on microstructured liquid crystals is feasible and future challenges towards the realisation of integrated liquid crystal microphotonics are discussed.     

Dynamics in ferro- and antiferroelectric phases of a liquid crystal with fluorinated molecules as studied by dielectric spectroscopy

For 1-[3-fluoro-4-(1-methylheptyloxycarbonyl)phenyl]-2-[4-2,2,3,3,4,4,4-heptafluorobutoxybutoxy)biphenyl-4-yl]ethane (1F7), built of chiral molecules, results of dielectric measurements of liquid-crystalline and solid phases are presented. Rich polymorphism of liquid-crystalline (SmC*, SmC*_A and SmI*_A) phases as well as of solid (Cr1 and Cr2) phases were observed down to –130°C. At a frequency range from 0.1 Hz to 3 MHz, the relaxation processes were detected in ferroelectric SmC*, antiferroelectric SmC*_A and highly ordered SmI*_A smectic phases. The mechanism of complex dynamics (moleculear and collective) was identified with the help of the bias field. Vitrification of conformationally disordered crystal phase Cr2 was found in accordance with calorimetric observations.     

Polymer and azo-dye composite: a photo-alignment layer for liquid crystals

In this article, we disclose a method to fabricate polymer-stabilised azo-dye photo alignment layers for liquid crystal. The idea includes the introduction of polymer network in the alignment layer, in optimal concentration, followed by two-step irradiation. The stabilised photo-alignment layer has been explored for different aspects of the display-related parameters, viz. anchoring energy, stability for various display-related environments as a function of concentration of monomer and irradiation, residual DC and voltage holding ratio. The composite photo-alignment layer offers well-suited parameters for the liquid crystal alignment and therefore could find application in a variety of modern photonic and display devices.     

Morphological studies of a (self-assembling oil gelator/liquid crystal) composite system

The aggregation structure of a novel (self-assembling oil gelator/liquid crystal) composite was investigated using light scattering studies and morphological observations. The oil gelator forms a self-assembled-networks aggregate in an organic solvent with a low molecular weight liquid crystal (LC). It became apparent from Hv light scattering patterns and polarizing optical microscopy that two types of LC molecular alignments exist in the composite: a random orientation and a spherulite type one in a nematic gel state. Also, optical and atomic force microscopic observations revealed that fibrils which formed bundles in the fibre-like and spherulite-like aggregates, were formed in the composite. The alignment of the liquid crystal molecules was related to the aggregation structure of the self-assembling oil gelator in a liquid crystal gel state.     

Recent progress in chiral photonic band‐gap liquid crystals for laser applications

This article describes a brief review of recent research advances in chiral liquid crystals (CLCs) for laser applications. The CLC molecules have an intrinsic capability to spontaneously organize supramolecular helical assemblages consisting of liquid crystalline layers through their helical twisting power. Such CLC supramolecular helical structures can be regarded as one‐dimensional photonic crystals (PhCs). Owing to their supramolecular helical structures, the CLCs show negative birefringence along the helical axis. Selective reflection of circularly polarized light is the most unique and important optical property in order to generate internal distributed feedback effect for optically‐excited laser emission. When a fluorescent dye is embedded in the CLC medium, optical excitation gives rise to stimulated laser emission peak(s) at the band edge(s) and/or within the CLC selective reflection. Furthermore, the optically‐excited laser emission peaks can be controlled by external stimuli through the self‐organization of CLC molecules. This review introduces the research background of CLCs carried out on the PhC realm, and highlights intriguing precedents of various CLC materials for laser applications. It would be greatly advantageous to fabricate active CLC laser devices by controlling the supramolecular helical structures. Taking account of the peculiar features, we can envisage that a wide variety of supramolecular helical structures of CLC materials will play leading roles in next‐generation optoelectronic molecular devices. © 2010 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.201000013     

A liquid crystal cell with double-side protrusion electrodes for fast response and low-voltage operation

We propose a homogeneously aligned liquid crystal (LC) cell with double-side protrusion electrodes for fast response and low-voltage operation. In the proposed device, both the bottom and top substrates have pixel electrodes to generate the fringe electric field. Because the penetration depth of the electric field is increased owing to the protrusion electrodes, the operating voltage is very low and the turn-on time is dramatically reduced compared with the conventional in-plane switching (IPS) mode. Moreover, LC molecules anchored strongly to the penetrated protrusion electrodes on both substrates exert a strong restoring force, resulting in a fast turn-off time. We found that the total response time of the LC cell with the proposed structure is three times faster than that of the conventional IPS mode.     

Enhancing the electro-optical properties of ferroelectric liquid crystals by doping ferroelectric nanoparticles

The effects on the physical and electro-optical properties of ferroelectric liquid crystals (FLCs) after the doping of a dilute suspension of ferroelectric nanoparticles (BaTiO₃) have been studied. Due to the permanent electric dipole moments of the ferroelectric nanoparticles, the spontaneous polarisation of FLCs with low doping concentration was about twice that of pure FLCs, in addition to a significant improvement in the dielectric properties, the response time and the V-shaped switching in the chiral smectic C (SmC?) phase. The results obtained point the way to an alternative for improving the applicability of FLCs without resorting to chemical synthesis.