Synthesis of a novel hybrid liquid‐crystalline rod–coil diblock copolymer

A series of novel rod–coil diblock copolymers on the basis of mesogen‐jacketed liquid‐crystalline polymer were successfully prepared by atom transfer radical polymerization from the flexible polydimethylsiloxane (PDMS) macroinitiator. The hybrid diblock copolymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐block‐polydimethylsiloxane, had number‐average molecular weights (M_n's) ranging from 9500 to 30,900 and relatively narrow polydispersities (≤1.34). The polymerization proceeded with first‐order kinetics. Data from differential scanning calorimetry validated the microphase separation of the diblock copolymers. All block copolymers exhibited thermotropic liquid‐crystalline behavior except for the one with M_n being 9500. Four liquid‐crystalline diblock copolymers with PDMS weight fractions of more than 18% had two distinctive glass‐transition temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1799–1806, 2003     

Influence of alkyl tail length on self-organisation of side-chain liquid crystalline polymers with biphenyl hemiphasmidic mesogens

A new and simple series of side-chain liquid crystalline polymethacrylates containing biphenyl hemiphasmidic mesogens based on 4-[(3,4,5-trialkan)-1-carbonylbenzoate]biphenyl (denoted as PT_mBMA, m = 6, 8, 10, 12, 14, 16, 18, m refers to the carbon number of alkoxy tails) groups was designed and successfully synthesised via free radical polymerisation. The phase structures and transitions of the polymers were investigated by the combination of techniques including differential scanning calorimetry, polarizing microscope, one-dimensional/two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering. The experimental results revealed that the liquid crystalline phase structures and behaviours of the polymers were found to be strongly dependent on the alkyl tail length (m). When m = 6, the PT_mBMA formed a stable smectic phase above T_g. When m = 8, 10, 12, 14, 16, 18, the sample presented a hexagonal columnar mesophase (Φ_h), suggesting that the alkyl length has played an important role in the phase behaviours of hemiphasmidic side-chain liquid crystalline polymers.     

Synthesis of polystyrene-polysiloxane side-chain liquid crystalline block copolymers

The synthesis of a new liquid crystalline block copolymer consisting of a polystyrene block and a side-chain liquid crystalline siloxane block is reported. The synthetic approach described is based on the anionic polymerization of styrene and cyclic trimethyltrivinyltrisiloxane monomers, followed by functionalization of the siloxane block with side chain mesogens. The siloxane block has a T_g well below 25°C and is designed to exhibit a chiral smectic C^* phase at room temperature. These block copolymers are the first side-chain liquid crystalline block copolymers which contain both a high T_g glassy block and a low T_g liquid crystalline block.     

Synthesis,morphology, and field‐effect transistor characteristics of new crystalline–crystalline diblock copolymers of poly(3‐hexylthiophene‐block‐steryl acrylate)

We report the synthesis, morphology, and charge‐transporting characteristics of new crystalline–crystalline diblock copolymers, poly(3‐hexylthiophene‐block‐stearyl acrylate) (P3HT‐b‐PSA). Three different diblock copolymers, P1 , P2 , and P3 , with P3HT/PSA polymerization degree block ratios of 60/26, 60/50, and 60/360, respectively, were prepared for investigating the morphology‐property relationship and the dependence of optoelectronic properties on the block copolymer structure. Small‐ and wide‐angle X‐ray scattering indicated the presence of both P3HT and PSA crystalline domains and the presence of microphase separation among blocks. The transmission electron microscopy and atomic force microscopy results revealed that the diblock copolymers cast from chlorobenzene, tended to form needle‐like morphologies. The field‐effect mobilities of the diblock copolymers deposited on untreated SiO₂ substrates, decreased with increasing PSA block length. In a sharp contrast, the mobilities enhanced with increasing PSA content when the P3HT‐b‐PSA was deposited on phenyltrichlorosilane (PTS)‐treated substrates. The copolymers with a 60/360 P3HT/PSA ratio showed a good mobility of 4 × 10^?3 cm² V^?1 s^?1 and a high on/off ratio of 7 × 10⁶ on PTS‐treated substrates. This study highlighted the importance of the block ratio, the substrate and self‐assembly structures on the charge transport characteristics of the crystalline–crystalline conjugated diblock copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of a liquid crystalline block on the microdomain structure of block copolymers

We report on the phase behavior and microdomain structure of two types of diblock copolymers containing a liquid crystal (LC) block joined to a flexible coil block. Consideration of the symmetry groups of the liquid crystalline phases and of the block copolymer microdomain structures provides a rationale for predicting the possible types of liquid crystalline block copolymer morphologies. Both previously reported and newly discovered structural types are identified. Possible organizational schemes are developed for the mesogens and periodic disclination defects with respect to the intermaterial dividing surfaces separating the liquid crystalline and flexible coil domains. The first type of copolymer investigated has a rod-like LC block whereas the second type copolymer has a side chain LC block. Five different rod-coil diblocks based on poly(hexyl isocyanate-b-styrene) P(HIC-b-S) were synthesized by anionic polymerization. Wavy lamellae, zig-zag and arrowhead microdomain morphologies corresponding to smectic-C and smectic-O structures were observed depending on the composition. These layered phases have the director (PHIC chain axis) tilted at various orientations with respect to the layer normal. Side-chain LC diblocks based on functionalized poly(isoprene-b-styrene) P(I-b-S) were also investigated. These polymers were synthesized using polymer analogous chemistry from P(I-b-S) precursors. Three different mesogenic groups were attached to the PI blocks: one based on biphenyl benzoate and two based on azobenzene. The microdomain structures found for the functionalized poly(isoprene side-chain LC-b-styrene) P(ILC-b-S) diblocks are typical of traditional coil-coil diblocks (lamellae and cylinders). However, these morphologies possess an additional smectic layering of the mesogens within the microdomains of the LC block. In the case of the rod-coil diblocks, the transformation from an initially isotropic state to the final microphase separated solid state occurs via nematic and then smectic liquid crystalline states, whereas for the side-chain LC-coil cases, the microphase separation transition occurs prior to development of orientational order. The long-range microdomain order of LC block-coil block copolymers can extend over very large distances due to the influence of the orientational ordering of the LC block.     

Controlled synthesis and microstructure tuning of PEG‐containing side‐chain discotic liquid crystalline block copolymers via RAFT polymerization

Liquid crystalline block copolymers (LCBCPs) are fascinating for their combining molecular level liquid crystalline orders and microphase separated multidomain morphologies. Here in this article, a series of PEG‐containing side‐chain discotic LCBCPs of PEG‐b‐P_m‐n with variant spacer length m = 6, 10 and degree of polymerization (DP) of discotic LC block from n = 10 to 45, have been well‐synthesized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The RAFT process mediated by macromolecular chain transfer agent (macroCTA) shows remarkable monomer concentration dependence. The influence of the introduced PEG block on the nano‐scale microphase‐segregation and mesophase organization is closely related to the side‐chain triphenylene (TP) discogens stacking mode dependent on the spacer length. Wherein, the PEG‐b‐P₆‐n series with a six‐methylene spacer exhibit consistent microphase separation with slightly disturbed yet ordered columnar structures. While for PEG‐b‐P₁₀‐n series with a longer ten‐methylene spacer, the columnar organization in the copolymers is even improved in contrast with the low order of randomly TP stacking in their corresponding homopolymers. This work offers a viable and inspiring pathway for controlled synthesis of block copolymers with bulky side groups, as well as enhances in‐depth understanding of the hierarchical superstructure organization in discotic units involved complex block copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2544–2553     

Ambient temperature thermotropic liquid crystalline viologen bis(triflimide) salts

Two dicationic salts with bis(triflimide) as counterions exhibited crystal-to-smectic liquid crystalline phase transitions (T _m=41 and 37°C) and smectic-to-isotropic liquid phase transitions (T _i=112, 136°C). They had a broad liquid crystalline phase range (71–99°C) and an excellent range of thermal stability (360–364°C). Their mixtures of various compositions also displayed liquid crystalline properties from r.t. to an extended range of temperatures. They exhibited fluorescence in 1, 2-dimethoxyethane and methanol.     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Asymmetry in liquid crystalline hexaalkoxytriphenylene discotics

The synthesis and phase behaviour of a new series of unsymmetrically substituted hexaalkoxytriphenylene‐based liquid crystals are reported. One of the hexyloxy chains in hexahexyloxytriphenylene (HAT6) is replaced by either a shorter or a longer chain, HAT‐(OC₆H₁₃)₅(OC _n H_2n+1). Compounds with chain lengths n of 2–14, 16 and 18 were prepared and investigated. Compounds with n?13 were not liquid crystalline. For all compounds with n?12 Col_h textures were observed by polarizing microscopy. X‐ray investigations showed that the intercolumnar distance gradually increased with n from n = 2 to n = 12, while the interdisk distance (3.6 Å) remained constant. A small odd–even effect on the increase of the intercolumn distance with n was observed. This effect was also found in the change of ΔH of isotropization with n.     

Synthesis,characterization, and photoreaction of photoreactive liquid crystalline block copolyetheresters

Photo-crosslinkable thermotropic liquid crystalline block copolyetheresters with photoreactive hard segment of poly(hexamethylene p-phenylenediacrylate) and soft segment of poly(tetramethylene ether) were synthesized by melt polycondensation from n-butyl-p-phenylenediacrylate, hexamethylene glycol, and poly(tetramethylene ether) glycol (PTMG, M_n = 1000–3000). The influence of molecular weight and composition of PTMG unit on the thermal behavior was determined by differential scanning calorimetry and polarized optical microscopy. All synthesized block copolymers show thermotropic liquid crystalline phase and can photo-crosslink by UV irradiation. Photoreaction of the copolymer thin film was carried out using Hg-UV light and investigated by FT–IR spectroscopy and a dynamic viscoelastic analyzer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1849–1855, 1997     

Liquid crystalline polymers XV. Synthesis,properties and cytotoxicity of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain

A new series of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on both 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain were synthesised using solution polycondensation technique of both with different 4,4?-diformyl-α,ω-diphenoxyalkane derivatives. Two model compounds were synthesised from the reaction of each cycloalkanone monomer with benzaldehyde, and their structures were determined using single crystal X-ray diffraction. The structure of the monomers and copolymers was confirmed by elemental and spectral analyses. In addition, the thermal stabilities of these copolymers were evaluated by thermogravimetric analysis. We performed both differential scanning calorimertric and polarised optical microscopic measurements to investigate the thermotropic liquid crystalline properties of synthesised copolymers. The UV?Vis absorption spectroscopy of the liquid crystalline copoly(arylidene-ether) 6f revealed that the system undergoes Entgegen/Zusammen (E/Z) photoisomerisation using UV lamp (450 nm). Moreover, the various characteristics of the prepared copolymers including: solubility, X-ray diffraction analysis, gel permeation chromatography (GPC) and scanning electron microscopy were determined and discussed. The cytotoxicity of the model compounds and selected examples of these copolymers was tested against MCF-7 breast cancer cells. All tested samples showed considerable results, where 6c copolymer gave the best result; it showed cytotoxicity against MCF-7 cell line with IC₅₀ of 0.26 µM.     

Novel triblock siloxane copolymers: Synthesis,characterization, and their use as surface modifying additives

Synthesis of novel triblock, polycaprolactone-b-polydimethylsiloxane (PDMS) and poly(2-ethyl-oxazoline)-b-PDMS copolymers were demonstrated. These materials were obtained via the ring-opening polymerization of ?-caprolactone or 2-ethyl-2-oxazoline monomers by using organofunctionally terminated PDMS oligomers as initiators and comonomers. Segment molecular weights in these copolymers were varied over a wide range between 1000 and 2000 g/mol and the formation of copolymers with desired backbone compositions were monitored by ¹H-NMR spectroscopy and GPC. DSC and TMA studies showed the formation of two phase morphologies with PDMS (T_g, ?120°C) and polycaprolactone (T_m, 50–60°C) or poly(2-ethyl-2-oxazoline) (T_g, 40-60°C) transitions respectively. The use of polycaprolactone-b-PDMS copolymers as surface modifying additives in polymer blends were also investigated. When these copolymers were blended at low levels (0.25–10.0% by weight) with various commercial resins such as, polyurethanes, PVC, PMMA, and PET, the resulting systems displayed silicone-like, hydrophobic surface properties, as determined by critical surface tension measurements or water contact angles. The effect of siloxane content, block length, base polymer type and morphology on the resulting surfaces are discussed.     

Transmission electron microscopy of saturated hydrocarbon block copolymers

Contrast for transmission electron microscopy (TEM) of microphase-separated saturated hydrocarbon diblock copolymers has been obtained using ruthenium tetroxide (RuO₄). This technique exploits differences in the rate of transport of the oxidizing stain in rubbery amorphous versus semicrystalline, or glassy, microdomains. Rapid quenching from above the melting (T_m), or glass transition (T_g) temperature is shown to preserve the equilibrium melt morphology in poly(ethylene)-poly(ethyl-ethylene) (PE-PEE), poly(ethylene)-poly(ethylene-propylene) (PE-PEP), and poly(vinylcyclohexane)-poly(ethyl-ethylene) (PVCH-PEE) diblock copolymers; PE melts at 108°C, PVCH is glassy up to about 140°C, while PEE and PEP remain rubbery down to approximately-20°C and ?56°C, respectively. Treatment of ultrathin sections of the quenched specimens with RuO₄ vapor led to welldefined TEM images, that revealed microdomain type and order. These results are consistent with SANS data taken under equilibrium conditions. © 1995 John Wiley & Sons, Inc.     

Polymer vesicles formed by amphiphilic diblock copolymers containing a thermotropic liquid crystalline polymer block

New amphiphilic diblock copolymers composed of poly(ethylene glycol) and a thermotropic liquid crystalline polymer have been synthesized and demonstrated to form well-defined unilamellar vesicles in water by cryo-electron microscopy.     

Visualisation-based analysis of structure and dynamics of liquid aluminosilicate under compression

Structure and dynamics of liquid aluminosilicate (Al₂O₃–2SiO₂, abbreviated as AS2) are investigated by molecular dynamics (MD) simulation and visualisation. The local structural characteristics are analysed via topology statistics of basic structural units TO_n and OT_m (T = Si, Al; n = 3, 4, 5, 6; m = 2, 3, 4, 5). The amount distribution as well as spatial distribution of the basic structural units under compression is also clarified. Regarding the intermediate range order, the amount and spatial distribution of all types of OT_m linkages as well as the bond statistics (corner-, edge-, and face-sharing) between two adjacent TO_n units are investigated in detail. The self-diffusion of Si, Al, and O is calculated via mean square displacement (MSD). The anomalous diffusion is explained in detail in relationship to structural characteristics. The structural and dynamical heterogeneities, micro-phase separation, and liquid–liquid phase transition are also discussed in this work.     

Morphology study of a series of azobenzene-containing side-on liquid crystalline triblock copolymers

A series of azobenzene containing side-on liquid crystalline ABA triblock copolymers were investigated.This triblock series possesses the same central liquid crystal block B and various lengths of the amorphous block A.Transmission electron microscopy(TEM),small angle X-rays and neutron scattering(SAXS and SANS) were used to study their morphologies.After annealing the samples over weeks at a temperature within the nematic temperature range of block B, different morphologies(disordered,lamellar,perforated layer and hexagonal cylinder) were observed by TEM.The alignment behavior of these azo triblock copolymers in the magnetic field for artificial muscle application,as well as the phase period and the order-disorder transition(ODT) were studied in situ by SANS.     

Synthesis and properties of liquid crystalline polyurethanes

1,4-Bis(p-hydroxybenzoate)phenylene was prepared using 1,4-bis(trimethylsiloxy)benzene and p-hydroxybenzoyl chloride as starting materials. A series of novel 1,4-bis(p-hydroxyalkoxybenzoate)phenylene were synthesized by reaction of 1,4-bis(p-hydroxybenzoate) phenylene with 3-brompropanol and 4-bromobutanol, respectively. The liquid crystal polyurethanes were prepared by 1,4-bis(p-hydroxyalkoxybenzoate)phenylene with MDI (p-methylene diphenylenediisocyanate) and 2,4-TDI(2,4-toluenediisocyanate), respectively. The thermotropic properties, the melting point (T _m) and the isotropization temperature (T _i) of the synthesized polyurethanes were characterized by DSC, IR and POM. It showed that all of the polyurethane polymers exhibited thermotropic liquid crystalline properties between 144°C and 260°C. The transition temperature (T _m and T _i) decreased with an increase in the length of the methylene spacer. __________ Translated from Journal of Qingdao University of Science and Technology, 2006, 27(1) (in Chinese)     

Synthesis and characterization of model diblock copolymers of poly(dimethylsiloxane) with poly(1,4‐butadiene) or poly(ethylene)

Model diblock copolymers of poly(1,4‐butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS, were synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene and hexamethylciclotrisiloxane (D₃) in the presence of sec‐BuLi. By homogeneous hydrogenation of PB‐b‐PDMS, the corresponding poly(ethylene) and poly(dimethylsiloxane) block copolymers, PE‐b‐PDMS, were obtained. The synthesized block copolymers were characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size‐exclusion chromatography (SEC), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and rheology. SEC combined with ¹H NMR analysis indicates that the polydispersity index of the samples (M_w/M_n) is low, and that the chemical composition of the copolymers varies from low to medium PDMS content. According to DSC and TGA experiments, the thermal stability of these block copolymers depends on the PDMS content, whereas TEM analysis reveals ordered arrangements of the microphases. The morphologies observed vary from spherical and cylindrical to lamellar domains. This ordered state (even at high temperatures) was further confirmed by small‐amplitude oscillatory shear flow tests. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1579–1590, 2006