Determination of Trenbolone Acetate in Cattle Feeds by a Flow Injection Chemiluminescence Method

A flow injection chemiluminescence (CL) method is described for the determination of trenbolone acetate based on the CL generated during its reaction with KMnO₄ in acidic medium. The CL intensity is greatly enhanced by alizarin yellow R. The CL intensity is linear with trenbolone acetate concentration in the range 0.1–100.0 mg L^?1 with a detection limit of 0.05 mg L^?1. The sample throughout is about 90 h^?1 and the relative standard deviation for 2.0 mg L^?1 trenbolone acetate solution is 1.5% (n = 11). The proposed method was applied to the determination of trenbolone acetate in cattle feeds.     

Fast Determination of Phenolic Compounds in Brazilian Wines from Vale do São Francisco Region by CE

Six phenolic compounds were separated and determined by capillary zone electrophoresis in red wine from Brazil’s region Vale do São Francisco with total analysis time of 12 min. The limit of detections varied from 1.59 to 2.24 mg L^?1. The relative standard deviations (for n = 6) varied from 0.28 to 3.50 %. The red wine samples analyzed were bought in the local market and the phenolic compound recoveries were in the range of 98–101 %. The concentrations of gallic acid in the samples of wines varied from 16.0 to 42.0 mg L^?1, caffeic acid (3.16–5.18 mg L^?1), syringic acid (5.73–13.0 mg L^?1), kaempferol (2.32–4.33 mg L^?1), quercetin (1.68–4.03 mg L^?1), myricetin (7.52–25.1 mg L^?1). The concentrations found agree with data reported in the literature.     

Electrooxidation of trifloxystrobin at the boron-doped diamond electrode: electrochemical mechanism,quantitative determination and degradation studies

The boron-doped diamond (BDD) presents attractive electrochemical sensing characteristics that are useful in analytical applications based on voltammetry and amperometry. It has a wide potential window in aqueous solutions enabling the quantification of the fungicide trifloxystrobin, measured at +1744 mV (versus Ag/AgCl), by square-wave anodic voltammetry in a Britton–Robinson (BR) buffer (0.04 mol L^?1; pH 4.00)/acetonitrile 70/30% v/v. The activation of the electrode was made using galvanostatic chronopotentiometry and cyclic voltammetry (CV). The linear analyte addition curve, I_p (µA) = (1.0 × 10^–1 ± 4.8 × 10^–6) C (mol L^?1) + (8.8 × 10^–2 ± 1.1 × 10^–3); R² = 0.997, was obtained using amplitude of 40 mV, frequency of 30 Hz, step potential of 20 mV. The instrumental limit of detection (LOD) was 1.4 × 10^–7 mol L^?1 (0.058 mg L^?1) and the dynamic linear range covered three decades (up to 1 × 10^–5 mol L^?1 or 4.1 mg L^?1). The samples were analysed with recoveries about 80% in orange juice samples and from 92.4% to 104.0% in water samples. A study to evaluate potential interferences was made in the presence of other fungicides. Diagnostic studies indicated that oxidation of trifloxystrobin in aqueous medium at the surface of the BDD is irreversible, involving two steps, each one with two electrons. The UV degradation of trifloxystrobin was evaluated using the proposed electrochemical method and the kinetics of degradation established with half-life of 1.07 min.     

Magnetic solid-phase extraction of Zineb by C18-functionalised paramagnetic nanoparticles and determination by first-derivative spectrophotometry

Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles have been synthesised and used as magnetic solid-phase extraction (MSPE) sorbent for the extraction of Zineb from agricultural aqueous samples under ultrasonic condition and quantified through a first-derivative spectrophotometric method. The produced magnetic nanoparticles were characterised by using scanning electron microscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy and zeta potential reader. The Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles had spherical structures with diameters in the range of 198–201 nm. Further, MSPE was performed by dispersion of Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles in a buffered aqueous solution accompanied by sonication. Next, the sorbents were accumulated by applying an external magnetic field and were washed with 4-(2-pyridylazo) resorcinol-dimethyl sulfoxide solution, for the purpose of desorbing the analyte. The extraction conditions (sample pH, washing and elution solutions, amount of sorbents, time of extraction, sample volume and effect of diverse ions), as well as Zineb-PAR first-order derivative spectra, were also evaluated. The calibration curve of the method was linear in the concentration range of 0.055–24.3 mg L^?1 with a correlation coefficient of 0.991. The limit of detection and limit of quantification values were 0.022 and 0.055 mg L^?1, respectively. The precision of the method for 0.27 mg L^?1 solution of the analyte was found to be less than 3.2%. The recoveries of three different concentrations (0.27, 1.37 and 13.7 mg L^?1) obtained 98.3%, 98.5% and 96.0%, respectively. The proposed Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles were found to have the capability of reusing for 7.0 times.     

Determination of Vitamins A and E Exploiting Cloud Point Extraction and Micellar Liquid Chromatography

Cloud point extraction and micellar chromatographic methods were developed for determination of vitamins A and E. The stationary phase was C18 and the mobile phase was 3.00% (w/v) SDS, 15.0% (v/v) butyl alcohol and 0.02 mol L^?1 phosphate buffer solution at pH 7.0. The retention times for vitamins A and E were 9.6 and 13.0, respectively. The extraction solution was 100 mmol L^?1 Triton X-100, 650 mg NaCl and 1.0% ascorbic acid at 70°C for 30 min. The method is precise (r.s.d. < 7%), the linear range was from 5.0 up to 360.0 mg L^?1 for both vitamins. Recovery test showed recuperation between 90.2 and 99.2%, and LOD and LOQ of 0.234 and 0.108 mg L^?1, 0.780 and 0.360 mg L^?1 to vitamins A and E were found.     

UV-assisted degradation of propiconazole in a TiO2 aqueous suspension: identification of transformation products and the reaction pathway using GC/MS

Photocatalytic degradation of propiconazole, a triazole pesticide, in the presence of titanium dioxide (TiO₂) under ultraviolet (UV) illumination was performed in a batch type photocatalytic reactor. A full factorial experimental design technique was used to study the main effects and the interaction effects between operational parameters in the photocatalytic degradation of propiconazole in a batch photo-reactor using the TiO₂ aqueous suspension. The effects of catalyst concentration (0.15–0.4 gL^?1), initial pH (3–9), initial concentration (5–35 mg L^?1) and light conditions were optimised at a reaction time duration of 90 min by keeping area/volume ratio constant at 0.919 cm² mL^?1. Photocatalytic oxidation of propiconazole showed 85% degradation and 76.57% mineralisation under UV light (365 nm/30 Wm^?2) at pH 6.5, initial concentration 25 mg L^?1 and constant temperature (25 ± 1 °C). The Langmuir–Hinshelwood kinetic model has successfully elucidated the effects of the initial concentration on the degradation of propiconazole and the data obtained are consistent with the available kinetic parameters. The photocatalytic transformation products of propiconazole were identified by using gas chromatography–mass spectrometry (GC/MS). The pathway of degradation obtained from mass spectral analysis shows the breakdown of transformation products into smaller hydrocarbons (m/z 28 and 39).     

Adsorption of thorium(IV) from aqueous solution by non-living biomass of mangrove endophytic fungus Fusarium sp. #ZZF51

The adsorption of thorium(IV) from aqueous solution by mangrove endophytic fungus Fusarium sp. #ZZF51 is studied by using a batch experiments. The parameters that affect the thorium(IV) sorption, such as solution pH, initial thorium(IV) concentration, contact time, and biomass dose, are discussed in detail. The maximum biosorption of thorium(IV) and the equilibrium sorption capacity are found to be 91 ± 1 % and 11.35 mg g^?1 respectively at pH 3.0, contact time 20 min, initial thorium(IV) concentration 50 mg L^?1 and non-living biomass dose 4.0 g L^?1. Kinetics data follow the pseudo-second-order model and equilibrium data agree with the Temkin isotherm model very well. FT-IR analysis indicates that hydroxyl and carbonyl groups play an important role in the biosorption process.     

Determination of Sb(III) and Total Sb in Antileishmanial Drugs by Spectrophotometric Flow‐Injection Hydride Generation

Abstract

A spectrophotometric procedure based on hydride generation and flow analysis is proposed for determination of antimony (III) [Sb(III)] and total antimony (Sb) in pharmaceutical samples. Firstly, Sb(III) reacts with hydrogen species generated in the system, forming antimony hydride. The reaction leads to a decrease in the permanganate concentration and, hence, in the intensity of the color of this specie, which is spectrophotometrically measured at 528 nm. Total Sb is determined as Sb(III) after Sb(V) reduction using 0.02% (m/v) KI. Some parameters, such as the number of channels of the gas phase separator, injection volume, coil length, and KBH₄ concentration, are investigated. The system presents a frequency of ca. 100 h^?1 and precision <3.0% [expressed as relative standard deviation (RSD) of 30 measurements using a 3.0 mg L^?1 Sb(III) solution]. The analytical curve ranging from 0.5 mg L^?1 to 5.0 mg L^?1 (r>0.998; n=5) permits limit of detection (LOD) and limit of quantification (LOQ) of 83 and 250 µg L^?1. For total Sb, the accuracy is checked by atomic absorption spectrometry applying the t test and the results are in accordance at the 95% confidence level. Recovery tests are used to check the accuracy for Sb(III) determination, and the recoveries are between 95% and 105%.     

Temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction with following back-extraction for HPLC/UV–Vis determination of 3-indole acetic acid in pea plants

In this work, the ionic liquid (IL)[C₆mim][PF₆] was used as IL-based extractant for dispersive liquid–liquid microextraction, followed by back-extraction and HPLC/UV–Vis determination of 3-indole acetic acid (IAA) in pea plant. The effects of some crucial factors such as chemical structure and volume of IL, pH adjustment, dissolution temperature, extraction time, centrifugation time, and ionic strength of aqueous sample were studied. The linear range of the HPLC method for IAA quantification was 17.5 × 10^?2–36.8 mg L^?1. LOD, LOQ, method recovery, and preconcentration factor values were 0.170 mg L^?1, 0.175 mg L^?1, 98.3, and 40 %, respectively. The RSD for the suggested method was calculated as 0.93 % at 35.04 mg L^?1 of IAA and each IL phase was able to be reused for at least four DLLME/back-extraction cycles. To evaluate the applicability of the suggested method, IAA was determined in pea plant samples.     

Selective fluorescence response and magnetic separation probe for 2,4,6-trinitrotoluene based on iron oxide magnetic nanoparticles

Despite the rapid development of nanomaterials and nanotechnology, it is still desirable to develop novel nanoparticle-based techniques which are cost-effective, timesaving, and environment-friendly, and with ease of operation and procedural simplicity, for assay of target analytes. In the work discussed in this paper, the dye fluorescein isothiocyanate (FITC) was conjugated to 1,6-hexanediamine (HDA)-capped iron oxide magnetic nanoparticles (FITC–HDA Fe₃O₄ MNPs), and the product was characterized. HDA ligands on the surface of Fe₃O₄ MNPs can bind 2,4,6-trinitrotoluene (TNT) to form TNT anions by acid–base pairing interaction. Formation of TNT anions, and captured TNT substantially affect the emission of FITC on the surface of the Fe₃O₄ MNPs, resulting in quenching of the fluorescence at 519 nm. A novel FITC–HDA Fe₃O₄ MNPs-based probe featuring chemosensing and magnetic separation has therefore been constructed. i.e. FITC–HDA Fe₃O₄ MNPs had a highly selective fluorescence response and enabled magnetic separation of TNT from other nitroaromatic compounds by quenching of the emission of FITC and capture of TNT in aqueous solution. Very good linearity was observed for TNT concentrations in the range 0.05–1.5 μmol?L^?1, with a detection limit of 37.2 nmol?L^?1 and RSD of 4.7 % (n?=?7). Approximately 12 % of the total amount of TNT was captured. The proposed methods are well-suited to trace detection and capture of TNT in aqueous solution.

Removal, preconcentration and spectrophotometric determination of U(VI) from water samples using modified maghemite nanoparticles

Arsenazo III modified maghemite nanoparticles (A-MMNPs) was used for removing and preconcentration of U(VI) from aqueous samples. The effects of contact time, amount of adsorbent, pH and competitive ions was investigated. The experimental results were fitted to the Langmuir adsorption model in the studied concentration range of uranium (1.0 × 10^?4–1.0 × 10^?2 mol L^?1). According to the results obtained by Langmuir equation, the maximum adsorption capacity for the adsorption of U(VI) on A-MMNPs was 285 mg g^?1 at pH 7. The adsorbed uranium on the A-MMNPs was then desorbed by 0.5 mol L^?1 NaOH solution and determined spectrophotometrically. A preconcentration factor of 400 was achieved in this method. The calibration graph was linear in the range 0.04–2.4 ng mL^?1 (1.0 × 10^?10–1.0 × 10^?8 mol L^?1) of U(VI) with a correlation coefficient of 0.997. The detection limit of the method for determination of U(VI) was 0.01 ng mL^?1 and the relative standard deviation (R.S.D.) for the determination of 1.43 and 2.38 ng mL^?1 of U(VI) was 3.62% and 1.17% (n = 5), respectively. The method was applied to the determination of U(VI) in water samples.     

Biosorption behaviors of uranium (VI) from aqueous solution by sunflower straw and insights of binding mechanism

Uranium (VI)-containing water has been recognized as a potential longer-term radiological health hazard. In this work, the sorptive potential of sunflower straw for U (VI) from aqueous solution was investigated in detail, including the effect of initial solution pH, adsorbent dosage, temperature, contact time and initial U (VI) concentration. A dose of 2.0 g L^?1 of sunflower straw in an initial U (VI) concentration of 20 mg L^?1 with an initial pH of 5.0 and a contact time of 10 h resulted in the maximum U (VI) uptake (about 6.96 mg g^?1) at 298 K. The isotherm adsorption data was modeled best by the nonlinear Langmuir–Freundlich equation. The equilibrium sorption capacity of sunflower straw was observed to be approximately seven times higher than that of coconut-shell activated carbon as 251.52 and 32.37 mg g^?1 under optimal conditions, respectively. The positive enthalpy and negative free energy suggested the endothermic and spontaneous nature of sorption, respectively. The kinetic data conformed successfully to the pseudo-second-order equation. Furthermore, energy dispersive X-ray, fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that U (VI) adsorption onto sunflower straw was predominantly controlled by ion exchange as well as complexation mechanism. The study revealed that sunflower straw could be exploited for uranium remediation of aqueous streams as a promising adsorbent.     

Determination of Titanium in Nano-Titanium(IV) Oxide Composite Food Packaging by Microwave Digestion and Inductively Coupled Plasma Atomic Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry

Titanium was determined in nano-titanium(IV) oxide food packaging by microwave digestion with inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Microwave digestion was optimized using different acid combinations. Both spectrometry techniques showed good reproducibility, repeatability, and recovery. For ICP-AES, the limit of detection was 5.0 mg kg^?1, the linear dynamic range was 100–5000 µ g L^?1, the average recoveries for blank samples spiked with titanium were between 94.7% and 100.1%, and the relative standard deviations were from 2.1% to 7.1%. By ICP-MS, the limit of detection was 0.3 mg kg^?1, the linear dynamic range was 0.5–200 µ g L^?1, the recoveries were 88.4%–96.3%, and the relative standard deviations were 6.3%–7.4%. These results indicated that methods were effective for the determination of titanium in food packaging.     

Detection of Aryloxyphenoxypropionate Herbicides by Enzyme-Linked Immunosorbent Assay

In this study, we developed a general and broad class-selective indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) for detecting aryloxyphenoxypropionate herbicides. A multideterminant artificial antigen was prepared from haptens of two herbicides (fenoxaprop-p-ethyl and cyhalofop-butyl) conjugated to the carrier protein Bovine serum albumin (BSA). The polyclonal antibodies (PAbs) were obtained by immunizing New Zealand white rabbits. Characterization studies of the PAbs showed that they had high affinity and specificity for the two herbicides. The 50% inhibitory concentration (IC₅₀) values for fenoxaprop-p-ethyl and cyhalofop-butyl were 0.185 mg L^?1 and 0.045 mg L^?1 with a limit of detection (LOD, IC₁₀) of 0.004 mg L^?1 and 0.002 mg L^?1, respectively. There were no obvious cross-reactivities with most of the aryloxyphenoxypropionates tested, except for metamifop (CR% = 55.56%). The recoveries of fenoxaprop-p-ethyl, cyhalofop-butyl and metamifop in environmental and agricultural samples (tap water, paddy water, soil, rice and soybean) ranged from 86.86–114.52%, 82.07–119.11% and 82.51–114.46%, respectively. These results demonstrate that the established ELISA could be used as a tool for detecting aryloxyphenoxypropionate multiresidues.     

Determination of nitrite in environmental waters by flow injection catalytic spectrophotometry

ABSTRACT

The flow injection catalytic spectrophotometry is proposed for the determination of nitrite based on the catalytic effect on the redox reaction between methylene blue and potassium bromate in acidic medium. The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of methylene blue at the maximum absorption wavelength of 664 nm. The method is characterised by low solvent consumption and easy automatic continuous analysis. It has higher sensitivity and lower detection limit. Experimental analysis conditions of the flow injection-catalytic photometry are optimised, and the best analysis conditions are: the concentration of the potassium bromate is 0.068 mol L^?1; the concentration of the phosphoric acid in oxidation liquid is 0.045 mol L^?1; the concentration of the methylene blue in colour-substrate solution is 2.4 mg L^?1, the volume of sample ring is 200 μL; the reaction coil is around 7 m in length; the inject time is 50 s and analysis time is 70 s. Under the optimal conditions, the linear range is from 10 to 500 μg L^?1 and the detection limit is 1 μg L^?1. The nitrate standard solution is continuously determined with a mass concentration of 300 μg L^?1. The RSD is determined to be 1.41% (n = 10). The nitrite in water samples, which were from the Half Acre pond, the Ink River and the Small West lake in a campus, was determined respectively by this method. A satisfactory standard addition recovery of 96.7%–103.9% was obtained.     

Simultaneous Derivatization and Dispersive Liquid–Liquid Microextraction for Fatty Acid GC Determination in Water

Simultaneous derivatization and dispersive liquid–liquid microextraction technique for gas chromatographic determination of fatty acids in water samples is presented. One hundred microlitre of ethanol:pyridine (4:1) were added to 4 mL aqueous sample. Then a solution containing 0.960 mL of acetone (disperser solvent), 10 μL of carbon tetrachloride (extraction solvent) and 30 μL of ethyl chloroformate (derivatization reagent) were rapidly injected into the aqueous sample. After centrifugation, 1 μL sedimented phase with the analytes was analyzed by gas chromatography. The effects of extraction solvent type, derivatization, extraction, and disperser solvents volume, extraction time were investigated. The calibration graphs were linear up to 10 mg L^?1 for azelaic acid (R ² = 0.998) and up to 1 mg L^?1 for palmitic and stearic acids (R ² = 0.997). The detection limits were 14.5, 0.67 and 1.06 μg L^?1 for azelaic, palmitic, and stearic acids, respectively. Repeatabilities of the results were acceptable with relative standard deviations (RSD) up to 13%. A possibility to apply the proposed method for fatty acids determination in tap, lake, sea, and river water was demonstrated.     

Synthesis and characterisation of novel chelating resin for selective preconcentration and trace determination of Pb(II) ions in aqueous samples by innovative microsample injection system coupled flame atomic absorption spectrometry

Expanded polystyrene (EPS) foam waste (white pollutant) was utilised for the synthesis of novel chelating resin i.e. EPS-N = N-α-Benzoin oxime (EPS-N = N-Box). The synthesised resin was characterised by FT-IR spectroscopy, elemental analysis, and thermogravimetric analysis. A selective method for the preconcentration of Pb(II) ions on EPS-N = N-Box resin packed in mini-column was developed. The sorbed Pb(II) ions were eluted with 5.0 mL of 2.0 mol L^?1 HCl and determined by microsample injection system coupled flame atomic absorption spectrometry (MIS-FAAS). The average recovery of Pb(II) ions was achieved 95.5% at optimum parameters such as pH 7, resin amount 400 mg, flow rates 1.0 mL min^?1 (of eluent) and3.0 mL min^?1 (of sample solution). The total saturation capacity of the resin, limit of detection (LOD) and limit of quantification (LOQ) of Pb(II) ions were found to be 30 mg g^?1, 0.033 μg L^?1 and 0.107 μg L^?1, respectively with preconcentration factor of 300. The accuracy, selectivity and validation of the method was checked by analysis of sea water (BCR-403), wastewater (BCR-715) and Tibet soil (NCS DC-78302) as certified reference materials (CRMs). The proposed method was applied successfully for the trace determination of Pb(II) ions in aqueous samples.     

Resolution of Racemic Ofloxacin Based on Co-Technology of Bubble Fractionation and Extraction

A method of bubble fractionation, with the help of solvent extraction, was developed for the resolution of racemic ofloxacin (rac OFLX). In this method, dibenzoyl-L-tartaric (L-DBTA), di-(2-ethylhexyl) phosphoric acid (D2EHPA) and sodium lauryl sulfate (SDS) were used as chiral collector, co-extractant and foamer, respectively. Several important parameters influencing the resolution performances, such as pH in aqueous phase, concentration of OFLX, concentration of L-DBTA, concentration of SDS and volume ratio of D2EHPA to n-octanol in solution, were investigated. The optimal resolution conditions were obtained with the aqueous phase pH 7, volume ratio of D2EHPA to n-octanol 6/14 in organic phase, concentration of SDS 0.42 mg mL^?1, concentration of OFLX 1.67 mg mL^?1, and concentration of L-DBTA 0.11 g mL^?1. Under the optimal extraction conditions, the enantiomeric excess value (e.e.%) was 60.08% and the enantioselectivity (??) was 5.58. It was found that the capacity of enantioselective separation can be greatly improved by the co-technology.     

Sequential Injection Chemiluminescence Methodology for Ozone Evaluation

A sequential injection methodology with chemiluminescence detection for the evaluation of residual ozone in waters is presented. The procedure is based on the reaction between luminol and ozone without catalysts.

Linear calibration plots were obtained for ozone concentrations between 0.05 and 2.0 mg L^?1, with a detection limit of 0.04 mg L^?1.

The developed methodology was applied to the determination of residual ozone in ozonized waters and the results complied with those furnished by the spectrophotometric reference procedure (relative deviations < 6.3%). The method exhibited good precision (RSD < 3.5%) and the sampling rate was about 140 determinations per hour.     

Degradation of prednisone in aqueous solutions by electron beam irradiation

A novel degradation study of prednisone (PRE) in aqueous systems (10 mg L^?1) was performed under electron beam irradiation (EBI) in various conditions. The data demonstrate that the highest degradation caused by EBI was obtained with the oxidation of hydroxyl radicals. The proper amount of hydrogen peroxide could increase the PRE total carbon content removal rate. Nine degradation products of PRE in aqueous solution were preliminarily analyzed using ultra-high performance liquid chromatography in combination with mass spectrometry. Furthermore, the chemical analysis and possible degradation pathway were proposed with the assistance of theoretical calculation results by density functional theory.