等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

An ab initio study of microsolvation of LiF in water: structures and properties of LiF-Wn,n = 1-9 complexes

Geometries of clusters of water molecules (W(n)) and those of the LiF-W(n) (n = 1-9) complexes were optimized using the B3LYP/6-31+G** method. Geometries of the complexes up to n = 7 were also optimized using the MP2/6-31+G** approach. Only one structure of each of W(n), n = 1-5 was considered to generate the complexes with LiF while two structures, one of a cage type and the other of a prism type, were considered for n = 6-9. The LiF-W(2) complex is found to be most stable among the various complexes. The LiF-W(6) complex, where W(6) is of a cage type, is predicted to be substantially less stable than that where W(6) is of a prism type. Certain existing ambiguities regarding the most stable structures of the LiF-W(n) (n = 1-3) complexes have been resolved. The LiF molecule seems to divide the W(n) clusters in the LiF-W(n) (n = 3-6) complexes into different fragments where at least one W(2)-like fragment is present. In LiF-W(6) (cage), there is one W(2)-like fragment while in LiF-W(6) (prism), there are three W(2)-like fragments. The LiF bond length is substantially increased in going from the gas phase to the different complexes, this increase being most prominent in LiF-W(6), where W(6) is of the cage or prism type. The LiF molecule, however, does not acquire the ionic structure Li(+)F(-) in any of the complexes studied here. An appreciable amount of electronic charge is transferred from LiF to the water molecules involved in the different complexes. In this process, the Li atom gains electronic charge in some cases, while the F atom considered separately, as well as the Li and F atoms taken together, lose the same in most cases.     

Thermal Decomposition Kinetics of Ethane Halides and Derivatives（C_2H_（6-n）X_n（n = 1～3）;X = F,Cl,Br）：DFT Study and NBO Analysis

A theoretical study of the thermal decomposition kinetics of ethane halides(C2H6-nXn(n = 1～3);X = F,Cl,Br) has been carried out at the B3LYP/6-31++G** and B3PW91/631++G** levels of theory.Among these methods and comparison of activation parameters with available experimental values,the B3PW91/6-31++G** method is in good agreement with the experimental data.The analysis of bond order and natural bond orbital(NBO) charges,bond indexes,and synchronicity parameters suggest the elimination of HX in reactions 1～9(HF:compounds 1～3,HCl:compounds 4～6,and HBr:compounds 7～9) occur through a concerted and slightly asynchronous four-membered cyclic transition state type of mechanism.     

Syntheses and reactions of hexavalent organotellurium compounds bearing five or six tellurium-carbon bonds

A variety of hexaorganotellurium compounds, Ar(6-n)(CH3)nTe [Ar=4-CF3C6H4, n=0 (1a), n=1 (3a), n=2 (trans-4a and cis-4a), n=3 (mer-5a), n=4 (trans-6a); Ph, n=0 (1b), n=1 (3b), n=2 (trans-4b); 4-CH3C6H4, n=0 (1c), n=1 (3c), n=2 (trans-4c), n=4 (trans-6c); 4-BrC6H4, n=0 (1d)] and Ar5(R)Te [Ar=4-CF3C6H4, R=4-CH3OC6H4 (8); Ar=4-CF3C6H4, R=vinyl (9), Ar=Ph, R=vinyl (10), Ar=4-CF3C6H4, R=PhSCH2 (11), Ar=Ph, R=PhSCH2 (12), Ar=4-CF3C6H4, R=nBu (13)] and pentaorganotellurium halides, Ar5TeX [Ar=4-CF3C6H4, X=Cl (2a-Cl), X=Br (2a-Br); Ar=Ph, X=Cl (2b-Cl), X=Br (2b-Br); Ar=4-CH3C6H4, X=Cl (2c-Cl), X=Br (2c-Br); Ar=4-BrC6H4, X=Br (2d-Br)] and (4-CF3C6H4)4(CH3)TeX [X=Cl (trans-7a-Cl) and X=Br (trans-7a-Br)] were synthesized by the following methods: 1) one-pot synthesis of 1 a, 2) the reaction of SO2Cl2 or Br2 with Ar5Te(-)Li+ generated from TeCl4 or TeBr4 with five equivalents of ArLi, 3) reductive cleavage of Ar(6-m)(CH3)(m)Te (m=0 or 2) with KC8 followed by treatment with CH3I, 4) valence expansion reaction from low-valent tellurium compounds by treatment with KC8 followed by reaction with CH3I, 5) nucleophilic substitution of Ar(6-y-z)(CH3)zTeX(y-z) (X=Cl, Br, OTf; z=0, 1; y=1, 2) with organolithium reagents. The scope and limitations and some details for each method are discussed and electrophilic halogenation of the hexaorganotellurium compounds is also described.     

Sequential Preparation of Series of Ternary Solutions

For ternary (and more general multicomponent) liquid-phase systems, solution preparation is a necessary step in measuring thermodynamic and transport property data and in identifying compositions useful in specific applications. We consider a ternary system comprised of liquid components A, B, and C (typically, nonelectrolytes), fully miscible over the entire range of composition. Achieving uniform coverage of the ternary triangle of compositions, with mass fraction increments of \( {1 \mathord{\left/ {\vphantom {1 N}} \right. \kern-0pt} N} \) corresponding to mass fractions of \( w_{\text{A}} = {m \mathord{\left/ {\vphantom {m N}} \right. \kern-0pt} N} \), \( w_{\text{B}} = {n \mathord{\left/ {\vphantom {n N}} \right. \kern-0pt} N} \), \( w_{\text{C}} = 1 - w_{\text{A}} - w_{\text{B}} \), for \( 0 \le m \le N \) and \( 0 \le m + n \le N \), requires preparation of \( {{(N + 1)(N + 2)} \mathord{\left/ {\vphantom {{(N + 1)(N + 2)} 2}} \right. \kern-0pt} 2} \) solutions. If the minimum quantity required for each composition is characterized in terms of a volume, as for, say, viscometry, then the volume required, if each solution is prepared directly from pure components, will grow with N more rapidly than quadratically. We develop an approach that mixes previously prepared solutions to make new compositions, and substantially reduces the amount of material needed. We illustrate this approach in detail when the components are liquids with the same density, miscible in all compositions, with no volume change on mixing, and each solution can be fully recovered to prepare subsequent solutions. For \( N = 10 \), only nine units are required, compared to 66 units for the conventional approach, while the number of weighings is reduced by 55%. Modifications to deal with cases in which the pure components have different densities, some material is not recovered after measurement, and the components have different costs, are discussed.     

Kinetics and mechanism of the oxidation of hydrogen peroxide by the octacyanotungstate(V) ion in alkaline aqueous media

Summary The oxidation of H₂O₂ by [W(CN)₈]^3– has been studied in aqueous media between pH 7.87 and 12.10 using both conventional and stopped-flow spectrophotometry. The reaction proceeds without generation of free radicals. The experimental overall rate law, , strongly suggests two types of mechanisms. The first pathway, characterized by the pH-dependent rate constant k _s, given by , involves the formation of [W(CN)₈· H₂O₂]^3–, [W(CN)₈· H₂O₂·W(CN)₈]^6– and [W(CN)₈· HO]^3– intermediates in rapid pre-equilibria steps, and is followed by a one-electron transfer step involving [W(CN)₈·HO]^3– (k _a) and its conjugate base [W(CN)₈·O]^4– (k _b). At 25 °C, I = 0.20 m (NaCl), the rate constant with H _a =40±6kJmol^–1 and S _a =–151±22JK^–1mol^–1; the rate constant with H _b =36±1kJmol^–1 and S _b =–136±2JK^–1mol^–1 at 25 °C, I = 0.20 m (NaCl); the acid dissociation constant of [W(CN)₈·HO]^3–, K ₅ =(5.9±1.7)×10^–10 m, with and is the first acid dissociation constant of H₂O₂. The second pathway, with rate constant, k _f, involves the formation of [W(CN)₈· HO₂]^4– and is followed by a formal two-electron redox process with [W(CN)₈]^3–. The pH-dependent rate constant, k _f, is given by . The rate constant k ₇ =23±6m ^–1 s ^–1 with and at 25°C, I = 0.20 m (NaCl).     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

六氢吡啶团簇的研究

The 6H-pyridine clusters have been studied by the TOF mass spectrometry, the VUV from synchrotron radiation and the molecular beam technique. Three-type clusters are observed in the VUV photoionization mass spectroscopy: Pn+(n=2-5,P stands for 6H-pyridine molecule), PnH+ (n=2-4) and Pn (H2O)m+(n=4,5, m=1;n=6, m=1,2). The PnH+ clusters may have the chain structures, the Pn+ and Pn(H2O)m+ clusters may have the cyclic structures, all of these are formed by the hydrogen-bond.     

Microsolvation of hydrogen sulfide: exploration of H2S.(H2O)n and SH-.H3O+.(H2O)n-1 (n = 5-7) cluster structures on ab initio potential energy surfaces by the scaled hypersphere search method

The scaled hypersphere search method was applied to ab initio potential energy surfaces of the H2S.(H2O)n/SH-.H3O+.(H2O)n-1 system with n = 5-7. Local minima databases including 121, 326, and 553 structures for n = 5-7, respectively, were obtained based on calculations at the MP2/6-311++G(3df,2p)//B3LYP/6-31+G** level. In these small cluster sizes, the SH-.H3O+.(H2O)n-1 type is still unstable relative to the H2S.(H2O)n type, and the global minima for H2S.(H2O)n are very similar to those of pure water clusters of (H2O)n+1. Thermodynamic simulations based on the present databases showed a structure transition from the well-mixed (H2O)n+1-like global minimum at low temperatures to unmixed complexes between H2S and (H2O)n at high temperatures.     

New approximation for the general temperature integral

A new approximation has been proposed for calculation of the general temperature integral $ \int\limits_0^T {T^m } e^{ - E/RT} dT $ \int\limits_0^T {T^m } e^{ - E/RT} dT , which frequently occurs in the nonisothermal kinetic analysis with the dependence of the frequency factor on the temperature (A=A ₀ T ^m). It is in the following form:

OXO(X=Cl,Br)与H(2S)反应机理的量子化学研究

卤素二氧化物自由基(OXO)是重要的同温层物种，在极地的夜间含量尤其丰富，由于其光解产生的卤素原子会造成臭氧的严重损耗，因此愈来愈受到人们的广泛关注嘲．OXO自由基可以通过自由基之间的反应或微波放电等方式获得，有关它与其它大气物种的反应已经进行了许多研究，Bemand等在实验上研究了Cl，H，O与OClO的反应动力学，对于OBrO与H之间的反应目前尚未见实验研究的报道，只有Guhua等在理论上对部分XBrO2(X=H，Cl，Br)同分异构体进行了研究．