Laterally linked mesogens in main chain polymers

The syntheses of liquid-crystalline main chain polyesters with laterally linked mesogens are presented. The terminal groups of the mesogens and the spacers fixation of mesogens, the polyesters with 1,4-di(p-alkoxybenzoyloxy)benzenes 1,4-di(p-alkoxybenzolyloxy)benzenes, 2,5-di(p-alkoxyphenyl)pyrimidines or a 4,4'-bis(p-ethoxyphenylazo)biphenyl derivative. Despite the unusual bilateral fixation of mesogens, the polyesters with 1,4-di(p-alkoxybenzoyloxy)benzenes show mainly monotropic phases which were found to be nematic in investigations with the polarizing microscope, in DSC measurements, temperature-dependent measurements of the Kerr constant and X-ray diffraction experiments. The monotropic nematic character remains when varying the terminal groups of the mesogen as well as the length of the n-alkanedioic acid spacer. However, when the spacer is branched, crystallization can be disturbed effectively and a stable nematic phase can be obtained. All of the polyesters with only 2,5-di(p-alkoxyphenyl)-pyrimidines as mesogens are amorphous. The reason probably lies in the unsymmetric 4,6-substitution of the pyrimidine ring. In contrast to this, oligomers with a 4,4'-bis(p-ethoxyphenylazo)biphenyl derivative show broad, predominantly enantiotropic nematic phases with relatively high clearing temperatures. With the knowledge gained about relations between structure and properties, especially of polyesters with 1,4-(p-alkoxybenzoyloxy)benzenes as mesogens, polyesters with this mesogenic group but with various architectures have been compared. Speculations about possible arrangements of the structural elements have been included to explain the phase behaviour of the polyesters with laterally fixed mesogens.     

Cross-shaped mesogens in main chain polymers

The synthesis of semiflexible main chain polyesters with cross-shaped mesogens and their phase behaviour, investigated by polarizing microscopy, DSC and X-ray diffraction, is presented. Polyesters of this type show mesophases with dominating nematic character and relatively high clearing temperatures. Systematic variation of the spacer and the terminal groups of the mesogens shows that longitudinally fixed rod-like parts of the mesogens have a strong influence on the clearing temperature and, therefore, on the mesophase behaviour. The corresponding rod-like but laterally fixed parts of the cross-shaped mesogens influence the melting temperatures significantly. This is critical in determining crystallization. However, laterally fixed rod-like parts contribute also to the formation of mesophases, but clearly to a far less extent.     

Synthesis and liquid crystalline properties of novel laterally connected trimesogens and tetramesogens

Three types of laterally connected triplet mesogens and one quadruplet mesogen incorporating rigid p-terphenyl units have been synthesized. Their liquid crystalline behaviour was investigated by polarizing microscopy, differential scanning calorimetry and X-ray scattering. The lateral fixation of three rod-like 4,4'-didecyloxy-p-terphenyl units mostly gives liquid crystalline materials with considerably increased mesophase stabilities with respect to the parent 4,4'-didecyloxy-2'-methyl-p-terphenyl. The mesophase stability strongly depends on the type of connection. The highest clearing temperatures were observed for triplets which are connected in line with each other (type I) and triplets which are laterally connected in a peripheral manner. Only the oligomesogens of type III are not liquid crystalline. All compounds incorporating exclusively decyloxy chains exhibit smectic phases (S_A and S_c). For the ethoxy derivatives the nematic phase was found.     

Preparation and properties of laterally multifluorinated benzoxazole-based nematic mesogens

Series of laterally multifluorinated heterocyclic compounds, 2-(2?,3-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (nPF(2)PF(3)Bx), are prepared and characterised. They mainly display enantiotropic nematic mesophases with wider mesophase ranges of 12–107°C (heating process) and 22–134°C (cooling process) than the corresponding analogues. The enhanced nematic mesophase stability is achieved via slightly increasing inter-ring twist angle with inter-ring lateral fluorine substitute in biphenyl unit, as well as through improving the molecular polarity with multifluorine substitutes. Meanwhile, two inter-ring lateral fluorine atoms lead to a decrease in melting/clearing points and a wide nematic mesophase range, which makes it possible for heterocyclic mesogens nPF(2)PF(3)Bx to use in nematic liquid crystal display mixtures.     

Polar nematic trans-4-substituted-cyclohexyl (E)-alk-2-enoates The influence of dipoles and double bonds on the transition temperatures and other physical properties

As part of a systematic study of the factors affecting nematic phase formation, the influence of introducing dipoles (in the form of oxygen, carbonyl and carboxy groups) and steric restrictions (in the form of carbon-carbon double bonds) in various positions, configurations and combinations in a model system (4-[trans-4-pentylcyclohexyl]benzonitrile) has been investigated. On the basis of these results, we have introduced an ester group and a carbon-carbon double bond with a trans-configuration (E) into the terminal alkyl chain attached to the cyclohexyl ring of a variety of two- and three-ring nematic mesogens of positive dielectric anisotropy. This is a new combination of a polar ester group (dipole effect) and the added rigidity imposed by the double bond (steric effect). Most of the new (E) alk 2-enoates containing two rings in the molecular core possess high melting points. Only a few two ring esters exhibit nematic phase, although the clearing point of those esters exhibiting mesomorphic behaviour was high. The corresponding three-ring (E)-alk-2-enoates incorporating an additional phenyl or cyclohexane ring also possess high melting and clearing points, as well as wide nematic ranges. No smectic mesophases could be observed for any of the (E)-alk-2-enoates synthesized. Comparisons with the corresponnding derivatives incorporating either just an ester group, or just a carbon-carbon double bond in the same position indicate that synergetic effects lead to higher clearing points than would otherwise have been expected. The new (E)-alk-2-enoates possess a surprisingly moderate viscosity for esters. The high value of the elastic constant ratio k₃₃/k₁₁ is of advantage for mixtures designed for supertwisted nematic LCDs.     

Liquid crystalline behaviour from binary mixtures of non-mesogenic 4-alkyl-N-(4-cyanophenyl) piperidines [1]

A relatively rare phenomenon, the induction of thermotropic mesophases from combinations of homologues of non-mesogenic compounds, is examined in some detail. Thus, monotropic nematic phases have been obtained from binary mixtures of 4-alkyl-N-(4-cyanophenyl)piperidines (I). Except for the hexyl homologue, the compounds I with butyl to nonyl as alkyl groups are non-mesomorphic as neat materials. From phase diagrams, the nematic clearing temperatures of the binary mixtures are found to vary linearly with composition and to increase as the molecular lengths of the components are increased. By introducing a methyl group at the 1-position of the alkyl chain, the melting points of the neat components are depressed, and the nematic clearing temperatures of the binary mixtures are lowered. Factors associated with the induction of this mesomorphism and with the 'kinetic' and thermodynamic stabilities of the monotropic nematic phases are discussed. Among these is the orientation between the rings of the core groups in I and in the more common mesogens, the trans-4-alkyl-1-(4-cyanophenyl) cyclohexanes, II.     

Apolar 2‐alkoxyalkoxy‐substituted nematic liquid crystals

The synthesis is reported of a series of apolar nematic liquid crystals incorporating an alkoxyalkoxy chain attached in a terminal position to the molecular core. The dependence of the mesomorphism and phase transition temperatures on the nature of the terminal chain with one, two or three oxygen atoms was studied. Some compounds with a completely alicyclic molecular core and a terminal 2‐methoxyethoxy chain exhibit a nematic phase with a low melting point, birefringence and viscosity and a relatively high clearing point in the absence of smectic phases. They do not to absorb light in the near UV and may be useful as components of UV‐stable nematic mixtures for use in photoluminescent liquid crystal displays. The presence of the methoxyethoxy chain leads to a relatively large dipole moment perpendicular to the molecular long axis.     

Thermotropic homopolyesters. IV. Study of fiber formation

We report a melt spinning and viscosity study of two semiflexible homopolyesters containing both rigid and flexible segments in the repeating unit. Single filaments of the polyesters formed from 4,4′-diacetoxybiphenyl and azelaic acid (PB7) and sebacic acid (PB8), and from 4′-hydroxyphenyl-4-hydroxycinnamate and azelaic acid (C7), were spun at temperatures between 205 and 255°C. The temperature dependence of the Newtonian melt viscosity of PB7 and C7 was investigated, and a range of molecular weights was studied for PB7. The spinning parameters, fiber characteristics, and viscosity-temperature behavior are related to the type of mesophase formed. The mechanical properties of fibers spun from both the nematic and smectic phases of these semiflexible chain polymers were poor. Increasing the polymer molecular weight or extrusion rate only afforded a modest improvement in fiber properties. Most polymers could not be spun at temperatures corresponding to the existence of the single mesophase. Hence the low viscosity typical of the nematic mesophase is not necessarily an advantage in fiber formation from the melt. It appears from these results that this type of polyester does not possess adequate chain extension to develop ultrahigh-modulus properties. The director, which describes the local orientation of molecules within the mesophase, may undergo more frequent variations than is the case for rigid chain polyesters. Mechanisms relevant to flexible polymers may contribute to the development of orientation for this class of nematogenic melts.     

Phase biaxiality in nematic liquid crystalline side-chain polymers of various chemical constitutions

In a previous deuterium NMR study conducted on a liquid crystalline (LC) polymer with laterally attached book-shaped molecules as the mesogenic moiety, we have revealed a biaxial nematic phase below the conventional uniaxial nematic phase (Phys. Rev. Lett. 2004, 92, 125501). To elucidate details of its formation, we here report on deuterium NMR experiments that have been conducted on different types of LC side-chain polymers as well as on mixtures with low-molar-mass mesogens. Different parameters that affect the formation of a biaxial nematic phase, such as the geometry of the attachment, the spacer length between the polymer backbone and the mesogenic unit, as well as the polymer dynamics, were investigated. Surprisingly, also polymers with terminally attached mesogens (end-on polymers) are capable of forming biaxial nematic phases if the flexible spacer is short and thus retains a coupling between the polymer backbone and the LC phase. Furthermore, the most important parameter for the formation of a biaxial nematic phase is the dynamics of the polymer backbone, as the addition of a small percentage of low molar mass LC to the biaxial nematic polymer from the original study served to shift both the glass transition and the appearance of detectable biaxiality in a very similar fashion. Plotting different parameters for the investigated systems as a function of T/Tg also reveals the crucial role of the dynamics of the polymer backbone and hence the glass transition.     

Thermotropic homopolyesters. III. Preparation and properties of polymers based on 4′-hydroxyphenyl-4-hydroxycinnamate

Low-molecular-weight 4′-acetoxyphenyl-4-acetoxyoinnamate, as well as several polyesters synthesized from this monomer and aliphatic dibasic acids, exhibit thermotropic nematic phases. DSC heating curves for all of the polymers exhibit multiple transitions. The amount of crystallinity of these polymers at room temperature is small and the degree of order along the chain axis in the crystalline phase is poor. For the lower homologues the nematic phase exists over a broad temperature range of approximately 100°C. The polyester from chiral (+)-3-methyl adipate forms a thermotropic cholesteric phase. Both the diacetoxy monomer and azelate polymers of low molecular weight adopt the homeotropic texture on glass slides, but with increasing molecular weight the planar texture becomes preferred. Investigation of the effects of electric fields in the conduction regime upon the nematic phase of the diacetoxy monomer revealed that Williams domains are formed only with difficulty. In most cases, a stationary pattern appeared instead. At higher voltage the dynamic scattering mode (DSM) was obtained, and above this a field-induced transition to the isotropic phase. The azelate polyesters exhibited Williams domains and the DSM in the conduction regime. The formation time for Williams domains was fairly short for polymers having η_inh < 0.44 dL/g, but increased to 80 min when η_inh = 0.68 dL/g. The DSM was only observed for polymers having η_inh < 0.61 dL/g. For these polymers the critical frequency separating the conduction and dielectric regimes exhibits a stronger temperature dependence than that of low-molecular-weight nematogens. A new instability pattern is reported for the azelate polyesters in the dielectric regime.     

Synthesis and mesomorphic behaviour of novel light-emitting liquid crystals

We report the results of a systematic study of the structure-mesomorphic behaviour relationships of a diverse range of light-emitting liquid crystals, but especially nematic 2,7-disubstituted-9,9-dialkylfluorenes. The dependence of the mesomorphic behaviour and transition temperatures on the nature and length of the terminal chains, the nature, position and number of lateral substituents and the number and nature of aromatic rings with and without heteroatoms in the central core is studied. The results of these studies are used to design polymerizable, light-emitting crystals (reactive mesogens) with a nematic phase having a high clearing point and a melting point below room temperature for facile OLED fabrication.     

Electric field induced AC alignment and realignment, a study of a liquid-crystalline copolymer having longitudinally and laterally attached mesogenic groups as side chains monitored through dielectric spectroscopy and optical thermomicroscopy

A study of a liquid crystal side chain copolymer with a siloxane backbone has been carried out using dielectric relaxation spectroscopy and optical microscopy. We have found that this particular copolymer, a mixture of longitudinally and laterally attached mesogens, can be aligned both homeotropically and planarly between two electrodes using a directing AC field of specific frequency by cooling from the melt or more importantly at temperatures below the clearing point (T_c). The switching of the material from homeotropic to planar and the reverse has been studied at temperatures below T_c. It is shown that the kinetics of realignment are strongly dependent on the electrical/thermal history of the sample. The dielectric data allows the state of alignment of the sample to be monitored and the molecular dynamics to be studied. The optical textures of the polymer which were subjected to different AC electric fields have been observed and provide complementary information to the dielectric work on the state of the aligned sample.     

Nematic tribenzosilatranes

The linkage of benzylsilatrane groups to laterally functionalized mesogens allows the investigation of molecular systems which contain propeller shaped mesogens and exhibit nematic phase behaviour.     

Unusual mesomorphic behaviour of new bent-core mesogens derived from 4-cyanoresorcinol

New five-ring bent-core mesogens derived from 4-cyanoresorcinol as the central core have been synthesized. The mesophases were assigned by polarizing microscopy, X-ray diffraction and electro-optical measurements. It was found that the mesophase behaviour clearly depends on the direction of the carboxyl linking groups between the aromatic rings. If the outer and inner ester linking groups of a wing are in the same direction then nematic phases and, for long chain members, SmC and SmCP_A phases are observed. If the outer and inner linking groups are in opposing directions a dimorphism, SmA-SmAP_A, is observed and the clearing temperatures are increased by about 55 K. It is remarkable that in the SmCP_A phases of the first series, polar switching preferably takes place through a collective rotation of the molecules around their long axes which is accompanied by the inversion of the chirality of the smectic layers.     

Nematic tribenzosilatranes

The linkage of benzylsilatrane groups to laterally functionalized mesogens allows the investigation of molecular systems which contain propeller shaped mesogens and exhibit nematic phase behaviour.     

Designing new lyotropic amphiphilic mesogens to optimize the stability of nematic phases

The factors which govern the stability of lyotropic amphiphilic nematic phases are delineated and then used to design mesogens which give rise to stable N_C and N_D phases on dissolution in water. The synthesis and phase behaviour of novel discoid amphiphiles, designed to form N_C phases, are described.     

Apolar 2-alkoxyalkoxy-substituted nematic liquid crystals

The synthesis is reported of a series of apolar nematic liquid crystals incorporating an alkoxyalkoxy chain attached in a terminal position to the molecular core. The dependence of the mesomorphism and phase transition temperatures on the nature of the terminal chain with one, two or three oxygen atoms was studied. Some compounds with a completely alicyclic molecular core and a terminal 2-methoxyethoxy chain exhibit a nematic phase with a low melting point, birefringence and viscosity and a relatively high clearing point in the absence of smectic phases. They do not to absorb light in the near UV and may be useful as components of UV-stable nematic mixtures for use in photoluminescent liquid crystal displays. The presence of the methoxyethoxy chain leads to a relatively large dipole moment perpendicular to the molecular long axis.     

香菇多糖的成分及其分子量研究

从香菇子实体中用0.9%NaCl水溶液、85%乙醇、热水、1%草酸铵、5%NaOH/0.05%NaBH₄和2%NaOH/2%尿素分别提取出四种杂多糖(L-FⅠ-L-FⅣn)和两种葡聚糖(L-FⅤ和L-FⅥn).红外光谱和高效液相色谱分析结果表明杂多糖主要由葡萄糖、葡萄糖醛酸、木糖、甘露糖、半乳糖和鼠李糖组成,而且按照分离过程的进行多糖中葡萄糖含量递增.由光散射和膜渗透压法研究了多糖的重均分子量Mw、均方根旋转半径2>^1/2、第二维利系数A₂及数均分子量M_n.L-FⅡ、L-FⅢ、L-FⅤ及L-FⅥn的M_w值依次为19.7×10⁴、192.3×10⁴、136.4×10⁴和136.7×10⁴,它们的多分散系数-Mw/-Mn在3～5范围.     

Synthesis and liquid crystalline properties of novel laterally connected twins

Several laterally connected twin mesogens incorporating rigid p-terphenyl units have been synthesized. Their liquid crystalline behaviour was investigated by polarizing microscopy and differential scanning calorimetry. If one compares the twins with their respective halves, the mesophase stabilizing influence of the lateral fixation becomes evident. It obviously pre-organizes the calamitic units and therefore stabilizes smectic phases. The mesophase behaviour of these twins depends strongly on the length and the structure of the spacer. Short as well as highly polar and rigid spacer units give rise to smectic phases with high transition temperatures. By increasing the spacer length the mesophase stability is drastically diminished. Dimesogenic 4,4'-didecyloxyterphenyl derivatives containing spacers consisting of two connecting atoms exhibit smectic C phases exclusively. Elongation of the spacer to three connecting atoms gives an S_A-S_c dimorphism, and in the case of compounds with longer spacers mostly the S_A phase and in one case the nematic phase were found.     

激光光散射表征聚N－异丙基丙烯酰胺的分子量分布

采用自由基聚合法合成了聚N-异丙基丙烯酰胺(PNIPAAM)样品,由激光光散射法(LLS),包括绝对累积散射光强的角度依赖性(静态LLS)和线宽分布的角度依赖性(动态LLS)表征了合成的PNIPAAM样品的分子量分布。通过对动态光散射测得的电场-电场时间相关函数的拉普拉斯变换,求得平动扩散系数分布G(D);结合静态和动态光散射测量的结果,即M_w和G(D),确定了PNIPAAM样品的平动扩散系数D对分子量M的标定关系式D=2.84×10^-4M^-0.55,并将G(D)转换成分子量分布F_w(M).