Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes)

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.     

A two-state computational investigation of methane C--H and ethane C--C oxidative addition to [CpM(PH3)]n+ (M = Co, Rh, Ir; n = 0, 1)

Reductive elimination of methane from methyl hydride half-sandwich phosphane complexes of the Group 9 metals has been investigated by DFT calculations on the model system [CpM(PH(3))(CH(3))(H)] (M = Co, Rh, Ir). For each metal, the unsaturated product has a triplet ground state; thus, spin crossover occurs during the reaction. All relevant stationary points on the two potential energy surfaces (PES) and the minimum energy crossing point (MECP) were optimized. Spin crossover occurs very near the sigma-CH(4) complex local minimum for the Co system, whereas the heavier Rh and Ir systems remain in the singlet state until the CH(4) molecule is almost completely expelled from the metal coordination sphere. No local sigma-CH(4) minimum was found for the Ir system. The energetic profiles agree with the nonexistence of the Co(III) methyl hydride complex and with the greater thermal stability of the Ir complex relative to the Rh complex. Reductive elimination of methane from the related oxidized complexes [CpM(PH(3))(CH(3))(H)](+) (M = Rh, Ir) proceeds entirely on the spin doublet PES, because the 15-electron [CpM(PH(3))](+) products have a doublet ground state. This process is thermodynamically favored by about 25 kcal mol(-1) relative to the corresponding neutral system. It is essentially barrierless for the Rh system and has a relatively small barrier (ca. 7.5 kcal mol(-1)) for the Ir system. In both cases, the reaction involves a sigma-CH(4) intermediate. Reductive elimination of ethane from [CpM(PH(3))(CH(3))(2)](+) (M = Rh, Ir) shows a similar thermodynamic profile, but is kinetically quite different from methane elimination from [CpM(PH(3))(CH(3))(H)](+): the reductive elimination barrier is much greater and does not involve a sigma-complex intermediate. The large difference in the calculated activation barriers (ca. 12.0 and ca. 30.5 kcal mol(-1) for the Rh and Ir systems, respectively) agrees with the experimental observation, for related systems, of oxidatively induced ethane elimination when M = Rh, whereas the related Ir systems prefer to decompose by alternative pathways.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Chiral phosphane alkenes (PALs): simple synthesis, applications in catalysis, and functional hemilability

A simple synthesis of a chiral phosphane alkene (PAL) involves: 1) palladium-catalyzed Suzuki coupling of 10-bromo-5H-dibenzo[a,d]cyclohepten-5-ol (1) with phenylboronic acid to give quantitatively 10-phenyl-5H-dibenzo[a,d]cyclohepten-5-ol (2); 2) reaction of 2 with Ph(2)PCl under acidic conditions to give a racemic mixture of the phosphane oxide (10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane oxide ((Ph)troppo(Ph), 3), which is separated into enantiomers by using high-pressure liquid chromatography (HPLC) on a chiral column; 3) reduction with trichlorosilane to give the enantiomerically pure phosphanes (R)- and (S)-(10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane ((Ph)tropp(Ph), 4). This highly rigid, concave-shaped ligand serves as a bidentate ligand in Rh(I) and Ir(I) complexes. Catalysts prepared from [Rh(2)(mu(2)-Cl)(2)(C(2)H(4))(4)] and (S)-4 have allowed the efficient enantioselective 1,4-addition of arylboronic acids to alpha,beta-unsaturated carbonyls (Hayashi-Miyaura reaction) (5-0.1 mol % catalyst, up to 95% ee). The iridium complex (S,S)-[Ir((Ph)tropp(Ph))(2)]OTf ((S,S)-6; OTf=SO(3)CF(3)) has been used as a catalyst in the hydrogenation of various nonfunctionalized and functionalized olefins (turnover frequencies (TOFs) of up to 4000 h(-1)) and moderate enantiomeric excesses have been achieved (up to 67% ee). [Ir((Ph)tropp(Ph))(2)]OTf reversibly takes up three equivalents of H(2). The highly reactive octahedral [Ir(H)(2)(OTf)(CH(2)Cl(2))(H(2)-(Ph)tropp(Ph))(2)] could be isolated and contains two hydrogenated monodentate H(2)-(Ph)tropp(Ph) phosphanes, one CH(2)Cl(2) molecule, one triflate anion, and two hydrides. Based on this structure and extensive NMR spectroscopic studies, a mechanism for the hydrogenation reactions is proposed.     

Synthesis, structural characterization, and ligand replacement reactions of gem-dithiolato-bridged rhodium and iridium complexes

The reaction of gem-dithiol compounds R 2C(SH) 2 (R = Bn (benzyl), (i) Pr; R 2 = -(CH 2) 4-) with dinuclear rhodium or iridium complexes containing basic ligands such as [M(mu-OH)(cod)] 2 and [M(mu-OMe)(cod)] 2, or the mononuclear [M(acac)(cod)] (M = Rh, Ir, cod = 1,5-cyclooctadiene) in the presence of a external base, afforded the dinuclear complexes [M 2(mu-S 2CR 2)(cod) 2] ( 1- 4). The monodeprotonation of 1,1-dimercaptocyclopentane gave the mononuclear complex [Rh(HS 2Cptn)(cod)] ( 5) that is a precursor for the dinuclear compound [Rh 2(mu-S 2Cptn)(cod) 2] ( 6). Carbonylation of the diolefin compounds gave the complexes [Rh 2(mu-S 2CR 2)(CO) 4] ( 7- 9), which reacted with P-donor ligands to stereoselectively produce the trans isomer of the disubstituted complexes [Rh 2(mu-S 2CR 2)(CO) 2(PR' 3) 2] (R' = Ph, Cy (cyclohexyl)) ( 10- 13) and [Rh 2(mu-S 2CBn 2)(CO) 2{P(OR') 3} 2] (R' = Me, Ph) ( 14- 15). The substitution process in [Rh 2(mu-S 2CBn 2)(CO) 4] ( 7) by P(OMe) 3 has been studied by spectroscopic means and the full series of substituted complexes [Rh 2(mu-S 2CBn 2)(CO) 4- n {P(OR) 3} n ] ( n = 1, 4) has been identified in solution. The cis complex [Rh 2(mu-S 2CBn 2)(CO) 2(mu-dppb)] ( 16) was obtained by reaction of 7 with the diphosphine dppb (1,4-bis(diphenylphosphino)butane). The molecular structures of the diolefinic dinuclear complexes [Rh 2(mu-S 2CR 2)(cod) 2] (R = Bn ( 1), (i) Pr ( 2); R 2 = -(CH 2) 4- ( 6)) and that of the cis complex 16 have been studied by X-ray diffraction.     

The optical resolution of tris(pentane-2,4-dionato)metal(III) complexes

A facile large-scale optical resolution of neutral [M(pd)₃] complexes, M = Cr(III), Co(III), Ru(III), Rh(III) and Ir(III), through enantioselective complex formation with (2R, 3R)-(-)-dibenzoyltartaric acid, is described.     

Synthesis and characterization of cyclotetraphosphato complexes of Rh(I), Ir(I), Ru(II), and Pd(II)

The cyclotetraphosphate ion (P(4)O(12)(4)(-)) as a PPN (PPN = (PPh(3))(2)N(+)) salt reacts with [MCl(cod)](2) (M = Rh, Ir; cod = 1,5-cyclooctadiene) to give the dinuclear complexes (PPN)(2)[[M(cod)](2)(P(4)O(12))], in which the two metal moieties are situated trans to each other with respect to the P(4)O(4) ring in the solid state. In solution, however, these complexes exist as mixtures of trans and cis isomers. On the other hand, the P(4)O(12)(4)(-) ion reacts with 4 equiv of [Rh(cod)(MeCN)(x)](+) cation to give the tetranuclear complex [[Rh(cod)](4)(P(4)O(12))], where the four Rh(cod) fragments are bound to the P(4)O(12) platform alternately on both sides of the P(4)O(4) ring. Dinuclear P(4)O(12) complexes of ruthenium and palladium are also synthesized.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Reduced and excited states of the intermediates (alpha-diimine)(C5R5)Rh in hydride transfer catalysis schemes: EPR and resonance Raman spectroscopy, and comparative DFT calculations of Co, Rh and Ir analogues

The electronic structures of the highly air-sensitive intermediates (N[caret]N) (C(5)Me(5))Rh, (N[caret]N = 2,2'-bipyridine (bpy), 2,2'-bipyrimidine (bpym), 2,2'-bipyrazine (bpz) and 3,3'-bipyridazine (bpdz)) of hydride transfer catalysis schemes were studied through resonance Raman (rR) spectroscopy and through EPR of the reduced forms [(N[caret]N) (C(5)Me(5))Rh](.-). The rR results are compatible with a predominant MLCT character of the lowest excited states [ (N[caret]N) (C(5)Me(5))Rh]*, and the EPR spectra of the reduced states reveal the presence of anion radical ligands, (N[caret]N) (.-), coordinated by unusually electron rich rhodium(i) centres. The experimental results, including the assignments of electronic transitions, are supported by DFT calculations for the model compounds [(N[caret]N)(C(5)H(5))Rh](o)/(.-), (N[caret]N) = bpy or bpym. The calculations confirm a significant but not complete mixing of metal and ligand orbitals in the lowest unoccupied MO which still retains about 3/4 pi* (N[caret]N) character. DFT calculations on (bpy)(C(5)H(5))M and [(bpy)(C(5)H(5))ClM](+), M = Co, Rh, Ir, agree with the experimental results such as the differences between the homologues, especially the different LUMO characters of the precursor cations in the case of Co-->d(M)) and Rh or Ir (-->pi*(bpy)).     

Sandwich Complexes of the As42-Aromatic Ring with Some Transition Metals

The equilibrium geometries, energies, harmonic vibrational frequencies, and nuc- leus independent chemical shifts (NICS) of the new type sandwich structures [As4MAs4]n- (M = Fe, Co, Ni, Ru, Rh, Pd, Os, Ir and Pt; n = 0, 1 or 2) are investigated at the B3LYP level.All the [As4MAs4]n- species adopt staggered (D4d) conformations as their stable structures and eclipsed (D4h) conformations as their transition states, and once the sandwich complexes are formed, the As42- square properties remain unchanged.The NICS calculation confirms that the complexes of Fe, Co, and Ni are aromatic with negative NICS values, and those of Ru, Rh, and Ir exhibit slight aromaticity, while those of Pd, Os, and Pt show slight antiaromaticity.     

Some transition metal complexes of new terdentate ligands: Bis[2-(diphenylphosphino)ethyl]benzylamine and bis[2-(diphenylarsino)ethyl)benzylamine

Complexes of the terdentate ligands bis[2-diphenylphosphino)ethyl]benzylamine (DPBA) and bis[2-(diphenylarsino)ethyl]benzylamine (DABA) with Co(II), Ni(II), Pd(II), Pt(II), Rh(III), Ir(III), Rh(I) and Ir(I) are reported. The ligand DPBA reacts with Co(II) ion to form two types of complexes: a high-spin, paramagnetic, tetrahedral Co(II) complex of composition [CoCl(DPBA)]Cl and a low-spin, paramagnetic, square-planar complex of composition [CoBr(DPBA)]B(C₆H₅)₄. The reaction of DPBA with Ni(II) ion in methanol yields low-spin, diamagnetic, square-planar complexes of type [NiX(DPBA)]Y [X = Cl, Br or I; Y = Cl or B(C₆H₅)₄]. Four-coordinate, square-planar, cationic complexes of type [MY(L⁺[M = Pd(II), Pt(II), Rh(I) or Ir(I); Y = Cl or P(C₆H₅)₃; L = DPBA or DABA], were obtained on reaction of L with various starting materials containing these metal ions. Reaction of DPBA and DABA with rhodium and iridium trichlorides gave octahedral, neutral complexes of general formula [MCl₃(L)] (M = Rh or Ir, L = DPBA or DABA). All the complexes were characterized on the basis of their elemental analysis, molarconductance data, magnetic susceptibilities, electronic spectra, IR spectral measurements, and¹H and³¹P-{¹H} NMR spectral data.     

Stepwise Construction of Polynuclear Complexes of Rhodium and Iridium Assisted by Benzimidazole-2-thiol. NMR and X-ray Diffraction Studies

Reactions of [M(2)(&mgr;-Cl)(2)(cod)(2)] (cod = 1,5-cyclooctadiene, M = Rh, Ir) with benzimidazole-2-thiol (H(2)Bzimt) afford the mononuclear complexes [MCl(H(2)Bzimt)(cod)] (M = Rh (1), Ir (2)) for which a S-coordination of the ligand is proposed based on their spectroscopic data. The dinuclear complexes [M(2)(&mgr;-HBzimt)(2)(cod)(2)] (M = Rh (3), Ir (4)) are isolated from the reaction of [M(acac)(cod)] and benzimidazole-2-thiol. They contain the monodeprotonated ligand (HBzimt(-)) bridging the two metals in a &mgr;(2)-(1kappaN,2kappaS) coordination mode and in a relative cis,cis-HT arrangement. Complexes 3 and 4 react with the appropriate species [M(cod)(Me(2)CO)(2)](+) to afford the trinuclear cationic aggregates [M(3)(&mgr;-HBzimt)(2)(cod)(3)](+) (M = Rh (5), Ir (6)) and with the [M'(2)(&mgr;-OMe)(2)(cod)(2)] compounds to give the homo- and heterotetranuclear complexes [MM'(&mgr;-Bzimt)(cod)(2)](2) (M = M' = Rh (7), Ir (8); M = Ir, M' = Rh (9)) containing the dideprotonated ligand (Bzimt(2)(-)). The trinuclear neutral complexes [M(3)(&mgr;-Bzimt)(&mgr;-HBzimt)(cod)(3)] are intermediates detected in the synthesis of the tetranuclear complexes. Protonation of 9 with HBF(4) gives the unsymmetrical complex [Ir(2)Rh(&mgr;-HBzimt)(2)(cod)(3)]BF(4) (10). This reaction involves the protonation of the bridging ligands followed by the removal of one "Rh(cod)" moiety to give a single isomer. The molecular structure of [Rh(2)(&mgr;-Bzimt)(cod)(2)](2) (7) has been determined by X-ray diffraction methods. Crystals are monoclinic, space group P2(1)/n, a = 20.173(5) ?, b = 42.076(8) ?, c = 10.983(3) ?, beta = 93.32(2) degrees, Z = 8, 7145 reflections, R = 0.0622, and R(w) = 0.0779. The complete assignment of the resonances of the (1)H NMR spectra of the complexes 3, 4, and 7-9 was carried out by selective decoupling, NOE, and H,H-COSY experiments. The differences in the chemical shifts of the olefinic protons are discussed on the basis of steric and magnetic anisotropy effects.     

Tetranuclear [Rh4(mu-PyS2)2(diolefin)4] complexes as building blocks for new inorganic architectures: synthesis of coordination polymers and heteropolynuclear complexes with electrophilic d8 and d10 metal fragments

The reaction of [Rh4(mu-PyS2)2(cod)4] (PyS2 = 2,6-pyridinedithiolate, cod = 1,5-cyclooctadiene) with CF3SO3Me gave the cationic complex [Rh(4)(mu-PyS(2)Me)(2)(cod)4][CF3SO3]2 (1) with two 6-(thiomethyl)pyridine-2-thiolate bridging ligands from the attack of Me+ at the terminal sulfur atoms of the starting material. Under identical conditions [Rh4(mu-PyS2)2(tfbb)4] (tfbb = tetrafluorobenzobarrelene) reacted with CF3SO3Me to give the mixed-ligand complex [Rh(4)(mu-PyS2)(mu-PyS2Me)(tfbb)4][CF3SO3] 2. The nucleophilicity of the bridging ligands in the complexes [Rh4(mu-PyS2)2(diolefin)4] was exploited to prepare heteropolynuclear species. Reactions with [Au(PPh3)(Me2CO)][ClO4] gave the hexanuclear complexes [(PPh3)2Au2Rh4(mu-PyS2)2(diolefin)4][ClO4]2 (diolefin = cod (3), tfbb (4)). The structure of 4, solved by X-ray diffraction methods, showed the coordination of the [Au(PPh3)]+ fragments to the peripheral sulfur atoms in [Rh4(mu-PyS2)2(diolefin)4] along with their interaction with the neighbor rhodium atoms. Neutral coordination polymers of formula [ClMRh4(mu-PyS2)2(diolefin)4]n (M = Cu (5, 6), Au (7)) result from the self-assembly of alternating [Rh4(mu-PyS2)2(diolefin)4] ([Rh4]) blocks and MCl linkers. The formation of the infinite polymetallic chains was found to be chiroselective for M = Cu; one particular chain contains exclusively homochiral [Rh4] complexes. Cationic heterometallic coordination polymers of formula [MRh4(mu-PyS2)2(diolefin)4]n[BF4]n (M = Ag (8, 9), Cu (10, 11)) and [Rh5(mu-PyS2)2(diolefin)5]n[BF4]n (12, 13) result from the reactions of [Rh4] with [Cu(CH2CN)4]BF4, AgBF4, and [Rh(diolefin)(Me2CO)2]BF4, respectively. The heterometallic coordination polymers exhibit a weak electric conductivity in the solid state in the range (1.2-2.8) x 10(-7) S cm(-1).     

Synthesis, structures, and properties of group 9- and group 10-group 6 heterodinuclear nitrosyl complexes

The reaction of the group 9 bis(hydrosulfido) complexes [Cp*M(SH)2(PMe3)] (M=Rh, Ir; Cp*=eta(5)-C 5Me5) with the group 6 nitrosyl complexes [Cp*M'Cl2(NO)] (M'=Mo, W) in the presence of NEt3 affords a series of bis(sulfido)-bridged early-late heterobimetallic (ELHB) complexes [Cp*M(PMe3)(mu-S)2M'(NO)Cp*] (2a, M=Rh, M'=Mo; 2b, M=Rh, M'=W; 3a, M=Ir, M'=Mo; 3b, M=Ir, M'=W). Similar reactions of the group 10 bis(hydrosulfido) complexes [M(SH)2(dppe)] (M=Pd, Pt; dppe=Ph 2P(CH2) 2PPh2), [Pt(SH)2(dppp)] (dppp=Ph2P(CH2) 3PPh2), and [M(SH)2(dpmb)] (dpmb=o-C6H4(CH2PPh2)2) give the group 10-group 6 ELHB complexes [(dppe)M(mu-S)2M'(NO)Cp*] (M=Pd, Pt; M'=Mo, W), [(dppp)Pt(mu-S)2M'(NO)Cp*] (6a, M'=Mo; 6b, M'=W), and [(dpmb)M(mu-S)2M'(NO)Cp*] (M=Pd, Pt; M'=Mo, W), respectively. Cyclic voltammetric measurements reveal that these ELHB complexes undergo reversible one-electron oxidation at the group 6 metal center, which is consistent with isolation of the single-electron oxidation products [Cp*M(PMe3)(mu-S)2M'(NO)Cp*][PF6] (M=Rh, Ir; M'=Mo, W). Upon treatment of 2b and 3b with ROTf (R=Me, Et; OTf=OSO 2CF 3), the O atom of the terminal nitrosyl ligand is readily alkylated to form the alkoxyimido complexes such as [Cp*Rh(PMe3)(mu-S)2W(NOMe)Cp*][OTf]. In contrast, methylation of the Rh-, Ir-, and Pt-Mo complexes 2a, 3a, and 6a results in S-methylation, giving the methanethiolato complexes [Cp*M(PMe3)(mu-SMe)(mu-S)Mo(NO)Cp*][BPh 4] (M=Rh, Ir) and [(dppp)Pt(mu-SMe)(mu-S)Mo(NO)Cp*][OTf], respectively. The Pt-W complex 6b undergoes either S- or O-methylation to form a mixture of [(dppp)Pt(mu-SMe)(mu-S)W(NO)Cp*][OTf] and [(dppp)Pt(mu-S) 2W(NOMe)Cp*][OTf]. These observations indicate that O-alkylation and one-electron oxidation of the dinuclear nitrosyl complexes are facilitated by a common effect, i.e., donation of electrons from the group 9 or 10 metal center, where the group 9 metals behave as the more effective electron donor.     

Effects of central metal ions on vibrational circular dichroism spectra of tris-(beta-diketonato)metal(III) complexes

Vibrational circular dichroism (VCD) spectra of a series of [M(III)(acac)3] (acac = acetylacetonato; M = Cr, Co, Ru, Rh, Ir, and Al) and [M(III)(acac)2(dbm)] (dbm = dibenzoylmethanato; M = Cr, Co, and Ru) have been investigated experimentally and/or theoretically in order to see the effect of the central metal ion on the vibrational dynamics of ligands. The optical antipodes give the mirror-imaged spectra in the region of 1700-1000 cm(-1). The remarkable effect of the central metal ion is observed experimentally on the VCD peaks due to C-O stretches (1500-1300 cm(-1)) for both [M(III)(acac)3] and [M(III)(acac)2(dbm)]. In the case of Delta-[M(III)(acac)3], for example, the order of frequency of two C-O stretches (E and A2 symmetries) is dependent on the kind of a central metal ion as follows: E (-) > A2 (+) for M = Co, Rh, and Ir, while A2 (+) > E (-) for M = Cr and Ru. In the case of Delta-[M(III)(acac)2(dbm)], the order of frequency of three C-O stretches (A, B, and B symmetries) is as follows: A (-) > B (+) > B (+) for Co(III), B (+) > A (-) > B (-) for Cr(III), and A (-) > B (+) > B (-) for Ru(III). These results imply that the energy levels of C-O stretches are delicately affected by the kind of central metal ion. Since such detailed information is not obtained from the IR spectra alone, the VCD spectrum can probe the effect of the central metal ion on interligand cooperative vibration modes.     

Density functional theory analysis of the interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in Ca3CoMO6 (M = Co, Rh, Ir)

In the isostructural oxides Ca(3)CoMO(6) (M = Co, Rh, Ir), the CoMO(6) chains made up of face-sharing CoO(6) trigonal prisms and MO(6) octahedra are separated by Ca atoms. We analyzed the magnetic and electronic properties of these oxides on the basis of density functional theory calculations including on-site repulsion and spin-orbit coupling, and examined the essential one-electron pictures hidden behind results of these calculations. Our analysis reveals an intimate interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in governing the magnetic and electronic properties of these oxides. These oxides undergo a Jahn-Teller distortion, but their distortions are weak, so that their trigonal-prism Co(n+) (n = 2, 3) ions still give rise to strong easy-axis anisotropy along the chain direction. As for the d-state split pattern of these ions, the electronic and magnetic properties of Ca(3)CoMO(6) (M = Co, Rh, Ir) are consistent with d(0) < (d(2), d(-2)) < (d(1), d(-1)) but not with (d(2), d(-2)) < d(0) < (d(1), d(-1)). The trigonal-prism Co(3+) ion in Ca(3)Co(2)O(6) has the L = 2 configuration (d(0))(1)(d(2), d(-2))(3)(d(1), d(-1))(2) because of the metal-metal interaction between adjacent Co(3+) ions in each Co(2)O(6) chain, which is mediated by their z(2) orbitals, and the spin-orbit coupling of the trigonal-prism Co(3+) ion. The spins in each CoMO(6) chain of Ca(3)CoMO(6) prefer the ferromagnetic arrangement for M = Co and Rh but the antiferromagnetic arrangement for M = Ir. The octahedral M(4+) ion of Ca(3)CoMO(6) has the (1a)(1)(1e)(4) configuration for M = Rh but the (1a)(2)(1e)(3) configuration for M = Ir, which arises from the difference in the spin-orbit coupling of the M(4+) ions and the Co···M metal-metal interactions.     

Approaches to trinuclear half-sandwich carbene complexes containing 1,2-dicarba-closo-dodecaboranes

The synthesis of trinuclear half-sandwich iridium and rhodium complexes containing both N-heterocyclic carbene (NHC) and 1,2-dicarba-closo-dodecaborane ligands is described. Complexes {Cp*M[E2C2(B10H10)]}3(L) (Cp*=pentamethylcyclopentadienyl; L=tris(2-(3-methylimidazol-2-ylidene)ethyl)amine; M=Ir (), Rh (); E=S (), Se ()) were obtained from the reactions of Cp*M[E2C2(B10H10)] (M=Ir (), Rh ()) with a silver-NHC precursor or from the reactions of [Cp*MCl2]3(L) (M=Ir (), Rh ()) with Li2E2C2(B10H10) (E=S, Se). The complexes were characterized by IR, NMR spectroscopy, elemental analysis. In addition, X-ray structure analyses were performed on complexes and .     

Trifluorosulfane ligand as an analogue of the nitrosyl ligand: highly exothermic fluorine transfer reactions from sulfur to metal in the chemistry of SF3 metal carbonyls of the first row transition metals

The variety of known very stable PF(3) metal derivatives analogous to metal carbonyls suggests the synthesis of SF(3) metal derivatives analogous to metal nitrosyls. However, the only known SF(3) metal complex is the structurally uncharacterized (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) synthesized by Cockman, Ebsworth, and Holloway in 1987 and suggested by electron counting to have a one-electron donor SF(3) group rather than a three-electron donor SF(3) group. In this connection, the possibility of synthesizing SF(3) metal derivatives analogous to metal nitrosyls has been investigated using density functional theory. The [M]SF(3) derivatives with [M] = V(CO)(5), Mn(CO)(4), Co(CO)(3), Ir(CO)(3), (C(5)H(5))Cr(CO)(2), (C(5)H(5))Fe(CO), and (C(5)H(5))Ni analogous to known metal nitrosyl derivatives are all predicted to be thermodynamically disfavored with respect to the corresponding [M](SF(2))(F) derivatives by energies ranging from 19.5 kcal/mol for Mn(SF(3))(CO)(4) to 5.4 kcal/mol for Co(SF(3))(CO)(3). By contrast, the isoelectronic [M]PF(3) derivatives with [M] = Cr(CO)(5), Fe(CO)(4), Ni(CO)(3), (C(5)H(5))Mn(CO)(2), (C(5)H(5))Co(CO), and (C(5)H(5))Cu are all very strongly thermodynamically favored with respect to the corresponding [M](PF(2))(F) derivatives by energies ranging from 64.3 kcal/mol for Cr(PF(3))(CO)(5) to 31.6 kcal/mol for (C(5)H(5))Co(PF(3))(CO). The known six-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) is also predicted to be stable relative to the seven-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(2)(SF(2)). Most of the metal SF(3) complexes found in this work are singlet structures containing three-electron donor SF(3) ligands with tetrahedral sulfur coordination. However, two examples of triplet spin state metal SF(3) complexes, namely, the lowest energy (C(5)H(5))Fe(SF(3))(CO) structure and a higher energy Co(SF(3))(CO)(3) structure, are found containing one-electron donor SF(3) ligands with pseudo square pyramidal sulfur coordination with a stereochemically active lone electron pair.     

Linear metal-metal-bonded tetranuclear M-Mo-Mo-M complexes (M = Ir and Rh): oxidative metal-metal bond formation in a tetrametallic system and 1,4-addition reaction of alkyl halides

Reaction of Mo2(pyphos)4 (1) with [MCl(CO)2]2 (M = Ir and Rh) afforded linear tetranuclear complexes of a formula Mo2M2(CO)2(Cl)2(pyphos)4 (2, M = Ir; 3, M = Rh). X-ray diffraction studies confirmed that two "MCl(CO)" fragments are introduced into both axial sites of the Mo2 core in 1 and coordinated by two PPh2 groups in a trans fashion, thereby forming a square-planar geometry around each M(I) metal. Treatment of 2 and 3 with an excess amount of tBuNC and XylNC induced dissociation of the carbonyl and chloride ligands to yield the corresponding dicationic complexes [Mo2M2(pyphos)4(tBuNC)4](Cl)2 (5a, M = Ir; 6a, M = Rh) and [Mo2M2(pyphos)4(XylNC)4](Cl)2 (7, M = Ir; 8, M = Rh). Their molecular structures were characterized by spectroscopic data as well as X-ray diffraction studies of BPh4 derivatives [Mo2M2(pyphos)4(tBuNC)4](BPh4)2 (5b, M = Ir; 6c, M = Rh), which confirmed that there is no direct sigma-bonding interaction between the M(I) atom and the Mo2 core. The M(I) atom in 5 and 6 can be oxidized by either 2 equiv of [Cp2Fe][PF6] or an equimolar amount of I2 to afford Mo(II)2M(II)2 complexes, [Mo2M2(X)2(tBuNC)4(pyphos)4]2+ in which two Mo-M(II) single bonds are formed and the bond order of the Mo-Mo moiety has been decreased to three. The Ir(I) complex 5a reacted not only with methyl iodide but also with dichloromethane to afford the 1,4-oxidative addition products [Mo2Ir2(CH3)(I)(tBuNC)4(pyphos)4](Cl)2 (13) and [Mo2Ir2(CH2Cl)(Cl)(tBuNC)4(pyphos)4](Cl)2 (15), respectively, although the corresponding reactions using the Rh(I) analogue 6 did not proceed. Kinetic analysis of the reaction with CH3I suggested that the 1,4-oxidative addition to the Ir(I) complex occurs in an SN2 reaction mechanism.