Analysis of mitochondrial DNA for authentication of meats from chamois (Rupicapra rupicapra), pyrenean ibex (Capra pyrenaica), and mouflon (Ovis ammon) by polymerase chain reaction-restriction fragment length polymorphism

The prevention of fraudulent labeling of game meat constitutes an important part of food regulatory control and quality assurance systems. A polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis based on mitochondrial deoxyribonucleic acid (DNA) was developed for authentication of meats from chamois (Rupicapra rupicapra), pyrenean ibex (Capra pyrenaica), and mouflon (Ovis ammon). Amplification and restriction site analysis of a DNA fragment about 720 base pairs (bp) from the mitochondrial 12S rRNA gene of all analyzed species permitted the selection of Msel and Apol endonucleases for meat speciation. The 12S rRNA restriction profiles obtained allowed the unequivocal identification of chamois, pyrenean ibex, and mouflon/sheep and their differentiation from meats of domestic species such as cattle, goat, and swine. The highly variable mitochondrial D-loop gene was also targeted to attempt discrimination between mouflon and sheep meats. A D-loop region (700-1000 bp) was amplified and sequenced in all game and domestic species analyzed, and a primer set was designed for the selective amplification of a 370 bp DNA fragment from mouflon and sheep. PCR-RFLP analysis with the selected Maell enzyme generated a single electrophoretic profile characteristic for sheep, whereas 3 different fragment patterns were obtained for mouflon meats. Consequently, the PCR-RFLP technique developed can be routinely applied in inspection programs in order to verify the correct labeling of game species.     

Identification of lactic acid bacteria within the consortium of a kefir grain by sequencing 16S rDNA variable regions

The microflora of a kefir grain was identified using a polymerase chain reaction-based strategy combined with 16S rRNA gene sequencing. DNA was extracted from the kefir grain and amplified in its 16S rDNA V1 and V2 regions. To guarantee a good representation of the overall lactic acid bacteria populations, DNA amplification was performed separately with primers specific either to the dominant or to the less abundant bacterial groups. The amplified fragments were cloned in Escherichia coli and then sequenced. Sequences of the V1 region were gathered into 5 groups of similarity and identified by aligning with the sequences of a public library. The V1 region allowed the identification of Lactobacillus kefiranofaciens, L. kefir, L. parakefir, and Lactococcus lactis but was inappropriate for the identification of leuconostocs at species level. Among 16S rDNA variable regions, the V2 region showed the highest variability between Leuconostoc species. Nevertheless, even in the V2 region, differences were too tenuous for effective identification of L. mesenteroides. The methodology described here allowed detection of the dominant species within each targeted microbial group.     

Rapid identification and classification of Mycobacterium spp. using whole-cell protein barcodes with matrix assisted laser desorption ionization time of flight mass spectrometry in comparison with multigene phylogenetic analysis

The need of quick diagnostics and increasing number of bacterial species isolated necessitate development of a rapid and effective phenotypic identification method. Mass spectrometry (MS) profiling of whole cell proteins has potential to satisfy the requirements. The genus Mycobacterium contains more than 154 species that are taxonomically very close and require use of multiple genes including 16S rDNA for phylogenetic identification and classification. Six strains of five Mycobacterium species were selected as model bacteria in the present study because of their 16S rDNA similarity (98.4–99.8%) and the high similarity of the concatenated 16S rDNA, rpoB and hsp65 gene sequences (95.9–99.9%), requiring high identification resolution. The classification of the six strains by MALDI TOF MS protein barcodes was consistent with, but at much higher resolution than, that of the multi-locus sequence analysis of using 16S rDNA, rpoB and hsp65. The species were well differentiated using MALDI TOF MS and MALDI BioTyper™ software after quick preparation of whole-cell proteins. Several proteins were selected as diagnostic markers for species confirmation. An integration of MALDI TOF MS, MALDI BioTyper™ software and diagnostic protein fragments provides a robust phenotypic approach for bacterial identification and classification.     

Chalcogenide-halides of niobium (V). 1. Gas-phase structures of NbOBr(3), NbSBr(3), and NbSCl(3). 2. Matrix infrared spectra and vibrational force fields of NbOBr(3), NbSBr(3), NbSCl(3), and NbOCl(3)

The molecular structures of NbOBr(3), NbSCl(3), and NbSBr(3) have been determined by gas-phase electron diffraction (GED) at nozzle-tip temperatures of 250 degrees C, taking into account the possible presence of NbOCl(3) as a contaminant in the NbSCl(3) sample and NbOBr(3) in the NbSBr(3) sample. The experimental data are consistent with trigonal-pyramidal molecules having C(3)(v)() symmetry. Infrared spectra of molecules trapped in argon or nitrogen matrices were recorded and exhibit the characteristic fundamental stretching modes for C(3)(v)() species. Well resolved isotopic fine structure ((35)Cl and (37)Cl) was observed for NbSCl(3), and for NbOCl(3) which occurred as an impurity in the NbSCl(3) spectra. Quantum mechanical calculations of the structures and vibrational frequencies of the four YNbX(3) molecules (Y = O, S; X = Cl, Br) were carried out at several levels of theory, most importantly B3LYP DFT with either the Stuttgart RSC ECP or Hay-Wadt (n + 1) ECP VDZ basis set for Nb and the 6-311G basis set for the nonmetal atoms. Theoretical values for the bond lengths are 0.01-0.04 A longer than the experimental ones of type r(a), in accord with general experience, but the bond angles with theoretical minus experimental differences of only 1.0-1.5 degrees are notably accurate. Symmetrized force fields were also calculated. The experimental bond lengths (r(g)/A) and angles ( 90 degree angle (alpha)()/deg) with estimated 2sigma uncertainties from GED are as follows. NbOBr(3): r(Nb=O) = 1.694(7), r(Nb-Br) = 2.429(2), 90 degree angle (O=Nb-Br) = 107.3(5), 90 degree angle (Br-Nb-Br) = 111.5(5). NbSBr(3): r(Nb=S) = 2.134(10), r(Nb-Br) = 2.408(4), 90 degree angle (S=Nb-Br) = 106.6(7), 90 degree angle (Br-Nb-Br) = 112.2(6). NbSCl(3): r(Nb=S) = 2.120(10),r(Nb-Cl) = 2.271(6), 90 degree angle (S=Nb-Cl) = 107.8(12), 90 degree angle (Cl-Nb-Cl) = 111.1(11).     

Species identification of Crassostrea and Ostrea oysters by polymerase chain reaction amplification of the 5S rRNA gene

A specific multiplex polymerase chain reaction (PCR) was developed for the identification of Crassostrea angulata, C. gigas, Ostrea edulis, and O. stentina oyster species. Universal primers were used for the amplification of complete repetition units of 5S rDNA in each of the 4 species. The alignment of the obtained sequences was the basis for the specific design of species-specific primers (ED1, ED2, ST1, ST2, CR1, and CR2) located in the nontranscribed spacer regions. The different sizes of the species-specific amplicons, separated by agarose gel electrophoresis, allowed identification of Crassostrea and Ostrea species. A multiplex PCR with a set of the 6 designed primers showed that they did not interfere with each other and bound specifically to the DNA target. This genetic marker can be very useful for traceability of the species, application in the management of oyster cultures, and conservation of the genetic resources of the species.     

Cyclic tetramers composed of rhodium(III), iridium(III), or ruthenium(II) half-sandwich and 6-purinethiones

Six new cyclic tetranuclear complexes [[M(Cp*)(L)](4)](4+) and [[Ru(II)(L)(cymene)](4)](4+) [Cp* = eta(5)-C(5)Me(5), cymene = eta(6)-p-MeC(6)H(4)Pr(i); M = Rh(III) and Ir(III); HL = 6-purinethione (H(2)put) and 2-amino-6-purinethione (H(2)aput)] were prepared in a self-assembly manner and characterized by NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray crystal structure analysis. The two crystal structures of [[Rh(Cp*)(H(0.5)put)](4)](CF(3)SO(3))(2) and [[Ir(Cp*)(Haput)](4)](CF(3)SO(3))(4) revealed that they have similar S(4) structures with an alternate chirality array of CACA, and all ligands adopt a mu-1kappaN(9):2kappa(2)S(6),N(7) coordination mode. The orientations of the four bridging ligands are alternately up and down, and they form a central square cavity. Interestingly, the cationic tetramers of the former are stacked up along the c axis, resulting in an infinite channel-like cavity. The driving force of this stacking is due to intermolecular double hydrogen bonds [N(1)-H...N(21) = 2.752(4) A] at both sides of the cavity. In the two Rh(III)- and Ru(II)-H(2)aput systems, it turned out that the dimeric species are dominantly formed in the reaction solutions but finally convert into the tetrameric species.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Complex formation of Ni(II), Cu(II), Pd(II), and Co(III) with 1,2,3,4-tetraaminobutane

Complex formation of the two tetraamine ligands (2S,3S)-1,2,3,4-tetraaminobutane (threo-tetraaminobutane, ttab) and (2R,3S)-1,2,3,4-tetraaminobutane (erythro-tetraaminobutane, etab) with Co(III), Ni(II), Cu(II), and Pd(II) was investigated in aqueous solution and in the solid state. For Ni(II) and Cu(II), the pH-dependent formation of a variety of species [Mn(II)xLyHz](2x+z)+ was established by potentiometric titrations and UV/Vis spectroscopy. In sufficiently acidic solutions the divalent cations formed a mononuclear complex with the doubly protonated ligand of composition [M(H2L)]4+. An example of such a complex was characterized in the crystal structure of [Pd(H2ttab)Cl2]Cl2.H2O. If the metal cation was present in excess, increase of pH resulted in the formation of dinuclear complexes [M2L]4+. Such a species was found in the crystal structure of [Cu2(ttab)Br4].H2O. Excess ligand, on the other hand, lead to the formation of a series of mononuclear bis-complexes [Mq(HxL)(HyL)](q+x+y)+. The crystal structure of [Co(Hetab)2][ZnCl4]2Cl. H2O with the inert, trivalent Co(III) center served as a model to illustrate the structural features of this class of complexes. By using an approximately equimolar ratio of the ligand and the metal cation, a variety of polymeric aggregates both in dilute aqueous solution and in the solid state were observed. The crystal structure of Cu2(ttab)3Br4, which exhibits a two-dimensional, infinite network, and that of [Ni8(ttab)12]Br16.17.5H2O, which contains discrete chiral [Ni8(ttab)12]16+ cubes with approximate T symmetry, are representative examples of such polymers. The energy of different diastereomeric forms of such complexes with the two tetraamine ligands were analyzed by means of molecular mechanics calculations, and the implications of these calculations for the different structures are discussed.     

Solvent extraction behaviour of lanthanum(III), cerium(III), europium(III), thorium(IV) and uranium(VI) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of La(III), Ce(III), Eu(III), Th(IV) and U(VI) with 3-phenyl-4- benzoyl-5-isoxazolone (HPBI) in chloroform has been studied. The mechanism of extraction and the species extracted have been identified. Extraction constants for each system have been calculated. The system has been used to separate Th(IV) from U(VI) and from La(III), Ce(III) and Eu(III). A comparison of the extraction constants with those for the 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and thenoyltrifluoroacetone (HTTA) systems indicates that HPBI extracts these metal species better than HPMBP and HTTA do.     

Preparation, characterization, and luminescence properties of gallium-metal face-to-face diporphyrins (M = H(2), GaL, Ru(CO)(OH), Co)

The preparation and characterization of a new series of mixed metal cofacial anthracene-bridged diporphyrins (DPA) containing a GaL fragment (L = OMe, OH) and another metallic center (M = GaL, Ru(CO)(OH), Co, and H(2) (i.e. free base)) are reported. The luminescence properties at 298 and 77 K, in degassed EtOH solution, are also reported, and are characterized by a weak pipi fluorescence (2 < tau(F) < 7 ns) arising from the low energy Q-bands (S(1)-->S(0)). In the mixed diporphyrin systems, a strong pipi fluorescence is detected from the free base, while the transition metalloporphyrins of Co(II) and Ru(II) do not emit. The homobimetallic di[Ga(OMe)] species exhibits an unprecedented double (pi)(pi) fluorescence arising from the two lowest energy absorption Q-bands. On the basis of a comparison with photophysical data on GaL monoporphyrins, the weak fluorescence and absence of phosphorescence for most cases indicate efficient intramolecular quenching. To define structural features, the X-ray structures of (DPA)[Ga(OMe)](2) (2), (DPA)[Ga-(OH)-Ru(CO)] (5a), and (DPA)[Ga(OMe)-Ru(MeOH)(CO)] (5b) have been obtained. The structures of 5a and 5b demonstrate an interesting aspect of the structural chemistry of these ligands related to the internal methoxide and methanolic ligands in 5b (resulting in a large interplanar separation and center-to-center distance) and the internal metal-bridging hydroxyl ligand in 5a (resulting in a small interplanar separation and center-to-center distance). These data support previously reported discussions on the ability of the DPA and the DPB analogue (diporphyrinylbiphenylenyl) ligands to open and close their "bite" around the binding pocket between the porphyrin macrocycles.     

A new pyrimidine-derived ligand,N-pyrimidine oxalamic acid,and its Cu(II), Co(II), Mn(II), Ni(II), Zn(II), Cd(II), and Pd(II) complexes: synthesis,characterization, electrochemical properties,and biological activity

A new heterocyclic compound N-(5-benzoyl-2-oxo-4-phenyl-2H-pyrimidin-1-yl)-oxalamic acid has been synthesized from N-amino pyrimidine-2-one and oxalylchloride. Bis-chelate complexes of the ligand were prepared from acetate/chloride salts of Cu(II), Co(II), Mn(II), Ni(II), Zn(II), Cd(II), and Pd(II) in methanol. The structures of the ligand and its metal complexes were characterized by microanalyses, IR, AAS, NMR, API-ES, UV-Vis spectroscopy, magnetic susceptibility, and thermogravimetric analyses. An octahedral geometry has been suggested for all the complexes, except for Pd(II) complex, in which the metal center is square planar. Each ligand binds using C(2)=O, HN, and carboxylate. The cyclic voltammograms of the ligand and the complexes are also discussed. The new synthesized compounds were evaluated for antimicrobial activities against Gram-positive, Gram-negative bacteria and fungi using the microdilution procedure. The Cu(II) complex displayed selective and effective antibacterial activity against one Gram-positive spore-forming bacterium (Bacillus cereus ATCC 7064), two Gram-positive bacteria (Staphylococcus aureus ATCC 6538 and S. aureus ATCC 25923) at 40–80 µg mL^?1, but poor activity against Candida species. The Cu(II) complex might be a new antibacterial agent against Gram-positive bacteria.     

Complexation of [S,S,S]- and [R,S,R]-isomers of N-bis [2-(1,2-dicarboxyethoxy)ethyl] aspartic acid with Mg(II), Ca(II), Mn(II), Fe(III), Cu(II) and Zn(II) ions in aqueous solution

In a search for environmentally friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of [S,S,S]- and [R,S,R]-isomers of N-bis[2-(1,2-dicarboxyethoxy)ethyl] aspartic acid (BCA6) with Mg(II), Ca(II), Mn(II), Fe(III), Cu(II) and Zn(II) ions in aqueous 0.1 M NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. With all metal ions (M ⁿ⁺), stable ML ^n?6 complexes dominated complex formation for both isomers. Differences in complexation models were found for binuclear species.     

Synthesis and Characterization of Phosphate-Catecholate Chelated Nd(III), Zr(IV), and Al(III) Complexes

Metal phosphates are important catalysts and materials in synthesis chemistry. Herein, we describe the synthesis and characterization of phosphate-catecholate chelated Nd(III), Zr(IV) and Al(III) chlorides ( 2 – 5 ). These species are achieved via ethyl chloride elimination reaction of oxophosphoranes with corresponding metal chlorides. The product 2 – 5 represent a new serial of monometallic and bimetallic phosphate-catecholate chelated metal complexes stabilized by both P−O and catecholate-O donors. These findings pave the way for future explorations of such species in catalysis.     

Structures and energies of coadsorbed CO and H2 on Fe5C2(001), Fe5C2(110), and Fe5C2(100)

Density functional theory calculations have been carried out on the CO/H2 coadsorption on the (001), (110), and (100) surfaces of Fe5C2 for the understanding of the Fischer-Tropsch synthesis (FTS) mechanism. The stable surface species changes with the variation of the H2 and CO coverage. Along with dissociated hydrogen and adsorbed CO in 2-, 3-, and 4-fold configurations, methylidyne (C(s)H) (C(s), surface carbon), ketenylidene (C(s)CO), ketenyl (C(s)HCO), ketene (C(s)H2CO), and carbon suboxide (C(s)C2O2) are computed as thermodynamically stable surface species on Fe5C2(001) and Fe5C2(110) containing both surface iron and carbon atoms. These surface carbon species can be considered as the preliminary stages for FTS. On Fe5C2(100) with only iron atoms on the surface layer, the stable surface species is dissociated hydrogen and CO with top and 2-fold configurations. The bonding nature of these adsorbed carbon species has been analyzed.     

Real-time polymerase chain reaction detection of fishmeal in feedstuffs

A SYBR Green PCR system was developed for detection of fishmeal in feedstuffs. The real-time PCR method combines the use of fish-specific primers that amplify an 87 base pair (bp) fragment of the mitochondrial 12S ribosomal RNA gene from fish species, and a positive control primer pair that amplifies a 99 bp fragment of the nuclear 18S ribosomal RNA gene in all eukaryotic organisms. The specificity of the primers was tested against 52 animal species and six plant species. Reference feedstuff samples were successfully tested for the presence of fishmeal, demonstrating the applicability of the assay to feedstuffs.     

Fluorometric chemosensors. Interaction of toxic heavy metal ions Pb(II), Cd(II), and Hg(II) with novel mixed-donor phenanthroline-containing macrocycles: spectrofluorometric,conductometric, and crystallographic studies

The macrocycles L(1)-L(3) incorporating N(2)S(3)-, N(2)S(2)O-, and N(2)S(2)-donor sets, respectively, and containing the 1,10-phenanthroline unit interact in acetonitrile solution with heavy metal ions such as Pb(II), Cd(II), and Hg(II) to give 1:1 ML, 1:2 ML(2), and 2:1 M(2)L complex species, which specifically modulate the photochemical properties of the ligands. The stoichiometry of the complex species formed during spectrofluorometric titrations and their formation constants in MeCN at 25 degrees C were determined from fluorescence vs M(II)/L molar ratio data. The complexes [Pb(L(1))][ClO(4)](2).(1)/(2)H(2)O (1), [Pb(L(2))][ClO(4)](2).MeNO(2) (1a), [Pb(L(3))(2)][ClO(4)](2).2MeCN (1b), and [Cd(L(3))][NO(3)](2) (2b) were also characterized by X-ray diffraction studies. The conformation adopted by L(1)-L(3) in these species reveals the aliphatic portion of the rings folded over the plane containing the heteroaromatic moiety with the ligands trying to encapsulate the metal center within their cavity. In 1, 1a, and 2b the metal ion completes the coordination sphere by interacting with counteranion units and solvent molecules. On the contrary, the 1:2 complex 1b shows Pb(II) sandwiched between two symmetry-related molecules of L(3) reaching an overall [4N + 4S] eight-coordination.     

Efficient DNA Extraction and Amplification of Samples from the Archeological Site of Pompei (Italy)

Due to their growth and metabolism, microorganisms can cause severe damage to Cultural Heritage, through mechanical and chemical processes. In this paper we used molecular approaches to study bacterial communities on samples from the archeological site of Pompei (Italy). In particular four DNA extraction methods without prior cultivation of the microflora were compared. In terms of efficiency, the DNA extraction method based on the Tri-Reagent™ kit gave the best results. All extraction protocols coupled with 16S rDNA fragments PCR amplification were satisfactory; but the best results were obtained by Klentaq DNA LA Polymerase™; this enzyme can be considered an effective tool for amplification of DNA from Cultural Heritage and possibly other environmental samples.     

Preparation and characterization of Cr(III), Mn(II), Fe(II), Co(II) and Ni(II) complexes of a hexaazadithiophenolate macrocycle

The ligating properties of the 24-membered macrocyclic dinucleating hexaazadithiophenolate ligand (L(Me))2- towards the transition metal ions Cr(II), Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) have been examined. It is demonstrated that this ligand forms an isostructural series of bioctahedral [(L(Me))M(II)2(OAc)]+ complexes with Mn(II) (2), Fe(II) (3), Co(II) (4), Ni(II) (5) and Zn(II) (6). The reaction of (L(Me))2- with two equivalents of CrCl2 and NaOAc followed by air-oxidation produced the complex [(L(Me))Cr(III)H2(OAc)]2+ (1), which is the first example for a mononuclear complex of (L(Me))2-. Complexes 2-6 contain a central N3M(II)(mu-SR)2(mu-OAc)M(II)N3 core with an exogenous acetate bridge. The Cr(III) ion in is bonded to three N and two S atoms of (L(Me))2- and an O atom of a monodentate acetate coligand. In 2-6 there is a consistent decrease in the deviations of the bond angles from the ideal octahedral values such that the coordination polyhedra in the dinickel complex 5 are more regular than in the dimanganese compound 2. The temperature dependent magnetic susceptibility measurements reveal the magnetic exchange interactions in the [(L(Me))M(II)2(OAc)]+ cations to be relatively weak. Intramolecular antiferromagnetic exchange interactions are present in the Mn(II)2, Fe(II)2 and Co(II)2 complexes where J = -5.1, -10.6 and approximately -2.0 cm(-1) (H = -2JS1S2). In contrast, in the dinickel complex 5 a ferromagnetic exchange interaction is present with J = +6.4 cm(-1). An explanation for this difference is qualitatively discussed in terms of the bonding differences.     

New layered materials: syntheses, structures, and optical properties of K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiaAg(2)S(4), Cs(2)TiAg(2)sS(4), and Cs(2)TiCu(2)Se(4)

The new compounds K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiAg(2)S(4), Cs(2)TiAg(2)S(4), and Cs(2)TiCu(2)Se(4) have been synthesized by the reactions of A(2)Q(3) (A = K, Rb, Cs; Q = S, Se) with Ti, M (M = Cu or Ag), and Q at 823 K. The compounds Rb(2)TiCu(2)S(4), Cs(2)TiAg(2)S(4), and Cs(2)TiCu(2)Se(4) are isostructural. They crystallize with two formula units in space group P4(2)/mcm of the tetragonal system in cells of dimensions a = 5.6046(4) A, c = 13.154(1) A for Rb(2)TiCu(2)S(4), a =6.024(1) A, c = 13.566(4) A for Cs(2)TiAg(2)S(4), and a =5.852(2) A, c =14.234(5) A for Cs(2)TiCu(2)Se(4) at 153 K. Their structure is closely related to that of Cs(2)ZrAg(2)Te(4) and comprises [TiM(2)Q(4)(2)(-)] layers, which are separated by alkali metal atoms. The [TiM(2)Q(4)(2)(-)] layer is anti-fluorite-like with both Ti and M atoms tetrahedrally coordinated to Q atoms. Tetrahedral coordination of Ti(4+) is rare in the solid state. On the basis of unit cell and space group determinations, the compounds K(2)TiCu(2)S(4) and Rb(2)TiAg(2)S(4) are isostructural with the above compounds. The band gaps of K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiAg(2)S(4), and Cs(2)TiAg(2)S(4) are 2.04, 2.19, 2.33, and 2.44 eV, respectively, as derived from optical measurements. From band-structure calculations, the optical absorption for an A(2)TiM(2)Q(4) compound is assigned to a transition from an M d and Q p valence band (HOMO) to a Ti 3d conduction band.     

Simultaneous determination of Cl(-), Br(-), I(-) and F(-) with flow-injection/ion-selective electrode systems

Flow-through ion-selective electrodes were constructed from compressed pellets (8-10 mm thick, 13 mm diameter, 10 tons/cm(2) pressure) of Ag(2)S/AgX (X = Cl(-), Br(-) or I(-)) drilled longitudinally (1.5 mm diameter hole) to be suitable for use in flow-injection analysis. A column of AgCl (5.5 cm long, 2-3 mm i.d.) was included in the Cl(-)-electrode manifold to remove interferences from 10(-4)M Br(-) and 3 x 10(-5)M I(-) and S(2-). A column of amalgamated lead (2-3 cm long, 2-3 mm i.d.) was used in the Br(-) electrode manifold to remove interference from 2 x 10(-5)M I(-), 3 x 10(-5)M S(2-) and 7 x 10(-4)M Cl(-). These columns and the addition of ascorbic acid were not required when I(-) was determined with the iodide electrode. The carrier stream was 0.1M sodium perchlorate (pH 4) at a flow-rate of 0.5 ml/min. The sample pH could be 4-7. Simultaneous determination of Cl(-) and I(-), Cl(-), I(-) and Br(-) and Cl(-), I(-), Br(-) and F(-) ions was possible with combinations of the corresponding electrodes and columns in series and/or parallel in specially designed manifolds. Calibration plots were linear, with almost theoretical slopes, down to 10(-6)M I(-), 5 x 10(-6)M Br(-), 10(-4)M Cl(-) and 5 x 10(-6)M F(-), with precision better than 1%. Sampling rates for single-ion determinations were 72, 102, 90 and 80 per hr for the one-, two-, three- and four-electrode systems respectively. Determinations of these ions in water samples by the recommended procedure and by established batch methods showed no significant difference at the 95% confidence limits in a paired comparison t-test.