基于不同辅助配体螯合电磷光聚合物的合成与性能研究

通过A-A, B-B型的Suzuki缩聚反应将三个具有不同辅助配体的2-(2'-苯并[b]噻吩)吡啶(btp)双环铱金属配合物引入芴和咔唑交替共聚物(PFCz)的主链上, 合成一系列最大发光波长在660 nm的红光螯合电磷光聚合物, 并研究了它们的电致发光性能. 实验证明了在这类电磷光聚合物中配合物单元辅助配体合理的分子设计, 可以提高配合物单体的溶解度, 提高聚合物的分子量和发光性能. 通过优化器件结构, 聚合物PFBtpIrf5单层器件(ITO/PEDOT:PSS/polymer＋PBD(30 wt%)/Ba/Al)的性能最好: 在电流密度为14.3 mA/cm²时, 最大外量子效率为1.93%.     

High-efficiency red-light emission from polyfluorenes grafted with cyclometalated iridium complexes and charge transport moiety

We report a new route for the design of electroluminescent polymers by grafting high-efficiency phosphorescent organometallic complexes as dopants and charge transport moieties onto alky side chains of fully conjugated polymers for polymer light-emitting diodes (PLED) with single layer/single polymers. The polymer system studied involves polyfluorene (PF) as the base conjugated polymer, carbazole (Cz) as the charge transport moiety and a source for green emission by forming an electroplex with the PF main chain, and cyclometalated iridium (Ir) complexes as the phosphorescent dopant. Energy transfer from the green Ir complex or an electroplex formed between the fluorene main chain and side-chain carbazole moieties, in addition to that from the PF main chain, to the red Ir complex can significantly enhance the device performance, and a red light-emitting device with the high efficiency 2.8 cd/A at 7 V and 65 cd/m2, comparable to that of the same Ir complex-based OLED, and a broad-band light-emitting device containing blue, green, and red peaks (2.16 cd/A at 9 V) are obtained.     

Triplet energy back transfer in conjugated polymers with pendant phosphorescent iridium complexes

The nature of Dexter triplet energy transfer between bonded systems of a red phosphorescent iridium complex 13 and a conjugated polymer, polyfluorene, has been investigated in electrophosphorescent organic light-emitting diodes. Red-emitting phosphorescent iridium complexes based on the [Ir(btp)(2)(acac)] fragment (where btp is 2-(2'-benzo[b]thienyl)pyridinato and acac is acetylacetonate) have been attached either directly (spacerless) or through a -(CH(2))(8)- chain (octamethylene-tethered) at the 9-position of a 9-octylfluorene host. The resulting dibromo-functionalized spacerless (8) or octamethylene-tethered (12) fluorene monomers were chain extended by Suzuki polycondensations using the bis(boronate)-terminated fluorene macromonomers 16 in the presence of end-capping chlorobenzene solvent to produce the statistical spacerless (17) and octamethylene-tethered (18) copolymers containing an even dispersion of the pendant phosphorescent fragments. The spacerless monomer 12 adopts a face-to-face conformation with a separation of only 3.6 A between the iridium complex and fluorenyl group, as shown by X-ray analysis of a single crystal, and this facilitates intramolecular triplet energy transfer in the spacerless copolymers 17. The photo- and electroluminescence efficiencies of the octamethylene-tethered copolymers 18 are double those of the spacerless copolymers 17, and this is consistent with suppression of the back transfer of triplets from the red phosphorescent iridium complex to the polyfluorene backbone in 18. The incorporation of a -(CH(2))(8)- chain between the polymer host and phosphorescent guest is thus an important design principle for achieving higher efficiencies in those electrophosphorescent organic light-emitting diodes for which the triplet energy levels of the host and guest are similar.     

High-efficiency electrophosphorescent copolymers containing charged iridium complexes in the side chains

A convenient approach to novel charged Ir polymers for optoelectronic devices to achieve red emission was developed. 2-(Pyridin-2-yl)benzimidazole units grafted into the side chains of macroligands (PFCz and PFP) served as ligands for the formation of charged Ir complex pendants with 1-phenylisoquinoline (1-piq). The charged Ir polymers (PFPIrPiq and PFCzIrPiq) showed exclusive Ir(1-piq)(2){N-[2-(pyridin-2-yl)benzimidazole]hexyl}(+)BF(4)(-) (IrPiq) emission, with the peak at 595 nm. The best device performances were obtained from PFCzIrPiq4 with the device configuration of ITO/PEDOT:PSS/PFCzIrPiq4+PBD (30 wt %)/TPBI/Ba/Al (PBD: 5-(4-tert-butylphenyl)-2-(biphenyl-4-yl)-1,3,4-oxadiazole; TPBI: 1,3,5-tris-(2-N-phenylbenzimidazolyl)benzene). A maximum external quantum efficiency (EQE) of 7.3 % and a luminous efficiency (LE) of 6.9 cd A(-1) with a luminance of 138 cd m(-2) were achieved at a current density of 1.9 mA cm(-2). The efficiencies remained as high as EQE=3.4 % and LE=3.3 cd A(-1) with a luminance of 3770 cd m(-2) at a current density of 115 mA cm(-2). The single-layer devices based on charged Ir polymers also showed high efficiency with the high work-function metal Ag as cathode. The maximum external quantum efficiencies of the devices were 0.64 % and 0.66 % for PFPIrPiq2 and PFPIrPiq10, respectively. A possible mechanism of an electrochemical cell associated with its electrochemical redox pathway for single-layer devices has been proposed. The results showed that the charged Ir polymers are promising candidate materials for polymer optoelectronic devices.     

Novel orange-red light-emitting polymers with cyclometaled iridium complex grafted in alkyl chain

Novel poly(fluorene-alt-carbazole) (PFCz) based copolymers with 3,6-carbazole-N-alkyl grafted iridium complex using 2,3-diphenylpyrazine as ligand (IrBpz) were synthesized by Suzuki polycondensation. The emission of host polymer, PFCz, was completely quenched when the copolymer with 1 mol% of iridium complex. An orange-red emission with CIE coordinate of (0.56, 0.42) was observed from Phosphorescent polymer light-emitting diodes (PhPLEDs). The PhPLEDs made by this copolymer-iridium complex showed a maximum luminous efficiency (LE) of 5.58 cd/A and a maximal luminance of 8625 cd/m². White light with CIE coordinate of (0.33, 0.27) was observed from white PhPLEDs (WPhPLEDs) made by the copolymer containing 0.4 mol% iridium complex. A LE of 2.30 cd/A with luminance of 2068 cd/m² was observed from WPhPLEDs.     

新型红光电磷光芴-alt-咔唑共聚物的合成与发光性能

通过Suzuki聚合反应合成了一系列以芴-alt-咔唑为主链, 铱配合物为侧链的深红色电磷光共轭聚合物. 发光器件结构为ITO/PEDOT∶PSS/PVK/Copolymer/Ba/Al, 基于共聚物PFCzIrNiq-1的器件在电流密度为9.4 mA/cm2时, 最大外量子效率为0.23%, 最大发射波长为680 nm.     

Synthesis, characterization and photophysics of fluorene-alt-oxadiazole copolymers containing pendent iridium (III) complex moiety

A series of fluorene-alt-oxadiazole copolymers containing a pendent phosphor chromophore of the (piq)₂Ir(pic) complex were synthesized via the palladium-catalyzed Suzuki coupling reaction, where piq is 1-phenylisoquinoline and pic is picolinic acid. These copolymers exhibited a similar absorption spectrum with a peak at about 330 nm and a typical emission peak at 408 nm in CH₂Cl₂ from the fluorene-alt-oxadiazole backbone. However, a significantly red-shifted emission peak at about 625 nm was observed in the neat films of these copolymers, which are attributed to the pendent iridium (III) complex unit. Using these copolymers as single emission layer, the polymer light-emitting devices with a configuration of ITO/PEDOT:PSS/copolymers/LiF/Al exhibited a saturated red emission with a peak at 632 nm. Significant influence of the attached iridium (III) complex ratio on EL performance was presented. A maximum current efficiency of 1.2 cd/A at 63 mA/cm² and a maximum luminance of 1125 cd/m² at 12 V were achieved from the device with the copolymer containing iridium (III) complex in a 3% molar ratio.     

以铱配合物为核、3,6-咔唑为枝的超支化电磷光聚合物的合成与发光性能

采用Suzuki缩聚反应制备了以铱配合物为核、3,6-咔唑为枝的超支化电磷光聚合物(PCzIrMppy1和PCzIrMppy3). 超支化聚合物PCzIrMppy3的光致发光量子效率为62%, HOMO能级为-5.22 eV, 接近阳极ITO/PEDOT∶PSS的能级(-5.20 eV), 表明其优异的空穴注入性能. 以PCzIrMppy3聚合物为发光层制备的绿光电磷光电致发光器件ITO/PEDOT∶PSS/Emissive layer/CsF/Al的最大电流效率为10.4 cd/A, 最大亮度为34758 cd/m². 此外, 器件的效率随电流密度的衰减较慢, 说明这种超支化结构可有效减少高电流密度下的浓度猝灭.     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

Simple Conjugated Polymers with On‐Chain Phosphorescent Iridium(III) Complexes: Toward Ratiometric Chemodosimeters for Detecting Trace Amounts of Mercury(II)

For the development of excellent optical probes for mercury(II), a series of simple conjugated polymers that contain phosphorescent iridium(III) complexes as receptors for mercury(II) were designed and synthesized. These conjugated polymers showed energy transfer from the polymer host to iridium(III) complex guest in both solution and the solid state. Unexpectedly, they can work as excellent polymer chemodosimeters for mercury(II) by utilizing the mercury(II)‐induced decomposition of iridium(III) complex. They exhibit a pronounced optical signal change with switchable phosphorescence and fluorescence, even when the concentration of a solution of mercury(II) in THF was as low as 0.5 ppb. With the addition of mercury(II), the phosphorescent emission intensity of iridium(III) complexes was quenched completely. As the emission from polymer backbones increased, the emission wavelength was redshifted simultaneously, thereby realizing ratiometric detection. Excellent selectivity toward mercury(II) over other potentially interfering cations was also realized. In addition, an obvious emission color change of polymer solution from red to yellow‐green was observed, thus realizing a “naked‐eye” detection of mercury(II). More importantly, the solid films of these polymer chemodosimeters also exhibited high sensitivity and rapid response to mercury(II), thereby demonstrating the possibility of the fabrication of sensing devices with fast and convenient detection of mercury(II). The sensing mechanism was also investigated in detail. This is the first report on chemodosimeters based on conjugated polymers with phosphorescent iridium(III) complexes.     

High‐efficiency organic electroluminescent devices using iridium complex emitter and arylamine‐containing polymer buffer layer

We have developed efficient organic electroluminescent (EL) devices using a phosphorescent material, tris(2‐phenylpyridine) iridium, Ir(ppy)₃, as an emitter material and a polymer buffer layer, tetraphenyldiamine‐containing poly(arylene ether sulfone) (PTPDES) doped with tris(4‐bromophenyl) aminium hexachloroantimonate (TBPAH) as an electron acceptor. In this device, a high external quantum efficiency of 21.6% and a luminous efficiency of 82 lm/W (77 cd/A) at 3.0 V were obtained. These high efficiencies can be explained by high quantum efficiency due to phosphorescent Ir(ppy)₃ and high luminous efficiency realized by the use of the polymer buffer layer. Copyright © 2002 John Wiley & Sons, Ltd.     

Iridium(III) complexes with orthometalated quinoxaline ligands: subtle tuning of emission to the saturated red color

Rational design and syntheses of four iridium complexes (1-4) bearing two substituted quinoxalines and an additional 5-(2-pyridyl) pyrazolate or triazolate as the third coordinating ligand are reported. Single-crystal X-ray diffraction studies of 1 reveal a distorted octahedral geometry, in which two dpqx ligands adopt an eclipse configuration, for which the quinoxaline N atoms and the C atoms of orthometalated phenyl groups are located at the mutual trans- and cis-positions, respectively. The lowest absorption band for all complexes consists of a mixture of heavy-atom Ir(III)-enhanced 3MLCT and 3pipi* transitions, and the phosphorescent peak wavelength can be fine-tuned to cover the spectral range of 622-649 nm with high quantum efficiencies. The cyclic voltammetry was measured, showing a reversible, metal-centered oxidation with potentials at 0.76-1.03 V, as well as two reversible reduction waves with potentials ranging from -1.61 to -2.06 V, attributed to the sequential addition of two electrons to the more electron-accepting heterocyclic portion of two distinctive cyclometalated C/N ligands. Complex 1 was used as the representative example to fabricate the red-emitting PLEDs by blending it into a PVK-PBD polymer mixture. The devices exhibited the characteristic emission profile of 1 with peak maxima located at 640 nm. The maximum external quantum efficiency was 3.15% ph/el with a brightness of 1751 cd/m2 at a current density of 67.4 mA/cm2, and the maximum brightness of 7750 cd/m2 was achieved at the applied voltage of 21 V and with CIE coordinates of (0.64, 0.31).     

pi-Conjugated chelating polymers with charged iridium complexes in the backbones: synthesis, characterization, energy transfer, and electrochemical properties

A series of pi-conjugated chelating polymers with charged iridium (Ir) complexes in the backbones were synthesized by a Suzuki polycondensation reaction, leading to homogeneous polymeric materials that phosphoresce red light. The fluorene and bipyridine (bpy) segments were used as polymer backbones. 5,5'-Dibromobipyridine served as a ligand to form a charged iridium complex monomer with 1-(9'9-dioctylfluorene-2-yl)isoquinoline (Fiq) as the cyclometalated ligand. Chemical and photophysical characterization confirmed that Ir complexes were incorporated into the backbones as one of the repeat units by means of the 5,5'-dibromobipyridine ligand. Chelating polymers showed almost complete energy transfer from the host fluorene segments to the guest Ir complexes in the solid state when the feed ratio was 2 mol %. In the films of the corresponding blend system, however, energy transfer was not complete even when the content of Ir complexes was as high as 16 mol %. Both intra- and intermolecular energy-transfer processes existed in this host-guest system, and the intramolecular energy transfer was a more efficient process. All chelating polymers displayed good thermal stability, redox reversibility, and film formation. These chelating polymers also showed more efficient energy transfer than the corresponding blended system and the mechanism of incorporation of the charged Ir complexes into the pi-conjugated polymer backbones efficiently avoided the intrinsic problems associated with the blend system, thus offering promise in optoelectronic applications.     

以铱配合物为核、聚(芴-咔唑)为臂的白光星型磷光聚合物

设计合成了以苯基苯并咪唑和吡啶三唑为配体的高效的黄绿光铱配合物(M1),并通过Suzuki缩聚反应制备了以磷光铱配合物客体为中心核、蓝光荧光聚(芴-咔唑)主体为臂的星型磷光聚合物(P2.5、P5.0和P10),着重对M1和聚合物的发光性能、电化学性能及热稳定性能进行研究。 结果表明,M1具有较高的荧光量子效率(32.06%),其荧光寿命为1.09 μs,聚合物荧光寿命为2.223.93 μs,均表现为磷光;通过调节主客体的比例,利用主客体的部分能量转移机制,来实现聚合物的不同光色,发光颜色可从蓝光向黄光变化;当M1摩尔分数为2.5%时,获得的白光聚合物(P2.5)具有较好的发光性能和热稳定性能,色坐标为(0.30,0.32),位于白光区域,其最高占有轨道(HOMO)能级和最低未占有轨道(LUMO)能级分别为5.49和2.43 eV,荧光量子产率为14.3%,荧光寿命为2.22 μs。     

Synthesis and Properties of Main-Chain Phosphorescent Polymer with Iridium Complex

Russian Journal of General Chemistry - The main-chain phosphorescent polymers, PFCzIr(PhStz) and PFOIr(PhStz) with iridium complex (4-BrPhBt)2Ir(Pytz), are synthesized by the Suzuki...     

高效磷光铱配合物的合成及电致发光性能研究

合成了一种含苯并噻唑结构配体的环金属化铱配合物(ffbi)₂Ir(acac)，(其中ffbi为1-(4-氟苄基)-2-(4-氟苯基)苯并咪唑，acac为乙酰丙酮)，并以其作为发光体, 制备了有机电致发光器件。结果表明该配合物具有强磷光发光特性，器件发绿色光。其中结构为TCTA(40 nm)/CBP∶Ir(6.3%，30 nm)/BCP(10 nm)/Alq(40 nm)的电致发光器件在12 V电压下最大发光亮度达41 499 cd·m^-2，在8 V电压下，最大外量子效率达5.7%。     

Synthesis and Luminescent Properties of Iridium Complexes with Reduced Concentration Quenching Effect

Three novel cyclometalated ligands 1-benzyl-2-phenyl-1H-benzoimidazole(BPBM), 1-(4-methoxy-benzyl)-2-(4-methoxy-phenyl)-1H-benzoimidazole(MBMPB) and 4-[2-(4-dimethylamino-phenyl)-benzoinidazol-1-ylmethyl]-phenyl-dimethyl-amine(DBPA) were designed and synthesized, and the corresponding highly efficiency green-emitting phosphorescent iridium complexes Ir(BPBM)₂(acac)(1), Ir(MBMPB)₂(acac)(2) and Ir(DPBA)₂(acac) (3) with acetylacetone(acac) as auxiliary ligand were also synthesized. The ligands are functionalized by bulky non-planarity substituents, thus the phosphorescent concentration quenching is substantially suppressed, and all the complexes exhibit bright photoluminescence(PL) in solid state. The photo-physical properties of the three iridium complexes were researched in detail. The results indicate that they have potential application in fabricating non-doped electrophosphorescence device.     

Investigation of spacer influences in phosphorescent‐emitting nonconjugated PLED systems

An assay was introduced to clarify influences on electroluminescent behavior for RGB‐colored phosphorescent terpolymers with N,N‐Di‐p‐tolyl‐aniline as hole‐transporting unit, 2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole (tert‐BuPBD) as electron‐transporting unit, and different iridium complexes in RGB‐colors as triplet emitting materials. All monomers were attached with spacer moieties to the “para” position of a polystyrene. Polymer light emitting diodes (PLEDs) were built to study the electro‐optical behavior of these materials. The gist was a remarkable influence of hexyl‐spacer units to the PLED performance. For all three colors only very restricted PLED performances were found. In comparison RGB‐terpolymers were synthesized with directly attached charge transport materials to the polymer backbone. For this directly linked systems efficiencies were 28 cd A^?1 @ 6 V (green), 4.9 cd A^?1 @ 5 V (red) and 4.3 cd A^?1 @ 6 V (bluish). In summary we assume that an improved charge percolation pathways regarding to the higher content of semiconducting molecules and an improved charge transfer to the phosphorescent dopand in the case of the copolymers without spacers are responsible for the better device performance comparing the copolymers with hexyl spacers. The approach of the directly connected charge transport materials at the nonconjugated styrene polymer backbone should be favored for further investigations, therefore. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 389–402, 2010     

Effective shielding of triplet energy transfer to conjugated polymer by its dense side chains from phosphor dopant for highly efficient electrophosphorescence

To examine the quenching of a triplet exciton by low triplet energy (E(T)) polymer hosts with different chain configurations for high E(T) phosphor guests, the quenching rate constant measurements were carried out and analyzed by the standard Stern-Volmer equation. We found that an effective shielding of triplet energy transfer from a high E(T) phosphor guest to a low E(T) polymer host is possible upon introducing dense side chains to the polymer to block direct contact from the guest such that the possibility of Dexter energy transfer between them is reduced to a minimum. Together with energy level matching to allow charge trapping on the guest, high device efficiency can be achieved. The extent of shielding for the systems of phenylene-based conjugated structures from iridium complexes follows the sequence di-substituted (octoxyl chain) in the para position (dC8OPPP) is greater than monosubstituted (mC8OPPP) and the PPPs with longer side chains are much higher than a phenylene tetramer (P4) with two short methyl groups. Further, capping the dialkoxyl-susbstituents with a carbazole (Cz) moiety (CzPPP) provides enhanced extent of shielding. Excellent device efficiency of 30 cd/A (8.25%) for a green electrophosphorescent device can be achieved with CzPPP as a host, which is higher than that of dC8OPPP as host (15 cd/A). The efficiency is higher than those of high E(T) conjugated polymers, poly(3,6-carbazole) derivatives, as hosts (23 cd/A). This observation suggests a new route for molecular design of electroluminescent polymers as a host for a phosphorescent dopant.