Studies of Fe2(CO)9 Formation in the Thermolysis of Fe(CO)5 Using Ab Initio Calculations of Fe(CO)5 and Fe(CO)4

Ab initio calculations using the GAMESS program package in the atomic basis TZV (Fe: (14s, 11p, 6d)/[10s, 8p, 3d]; C, O: (11s, 6p)/[5s, 3p]) were performed with account taken of the correlation with the second-order Möller–Plesset (MP2) perturbation theory to predict a new conformer Fe(CO)₄ (with D _4h symmetry). This conformer has a square planar configuration in the ground singlet electronic state and is a mild electrophile produced by dissociation of Fe(CO)₅ along the axial Fe–C bond. The process of nucleation of iron nanoparticles Fe(CO)₅ + Fe(CO)₄ Fe₂(CO)₉ is supposed to occur in two stages. The first stage is an orbital-controlled reaction which should be monitored as an increase in medium polarity and temperature. It should proceed with participation of only one of the stable conformers of the nucleophile Fe(CO)₅, namely, a mild conformer with square-pyramidal structure (C _4v ) rather than a hard but energetically more advantageous conformer with trigonal–bipyramidal structure (D _3h ). The structure of a prereaction complex was discussed.     

Computational study of the energetics of 3Fe(CO)4, 1Fe(CO)4 and 1Fe(CO)4(L), L = Xe, CH4, H2 and CO

Large basis CCSD(T) calculations are used to calculate the energetics of 3Fe(CO)4, 1Fe(CO)4 and 1Fe(CO)4(L), L = Xe, CH4, H2 and CO. . The relative energy of the excited singlet state of Fe(CO)4 with respect to the ground triplet state is not known experimentally, and various lower levels of theory predict very different results. Upon extrapolating to the infinite basis set limit, and including corrections for core-core and core-valence correlation, scalar relativity, and multi-reference character of the wavefunction, the best CCSD(T) estimate for the spin-state splitting in iron tetracarbonyl is 2 kcal mol(-1). Calculation of the dissociation energy of 1Fe(CO)4(L) into singlet fragments, taken together with known experimental behaviour of triplet Fe(CO)4, provides independent evidence for the fact that the spin-state splitting is smaller than 3 kcal mol(-1). These calculations highlight some of the challenges involved in benchmark calculations on transition metal containing systems.     

Photochemical reactions of (CO)2 (PPh3)MnC5H4Fe(CO)2C5H5 and (CO)2(PPh3)MnC5H4COFe(CO)2C5H5 with PPh3

Conclusions The photochemical reactions of (CO)₂(PPh₃)MnC₅H₄Fe(CO)₂C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)₂C₅H₅ with PPh₃ gave the products of replacing the CO on the Fe atom by PPh₃: respectively (CO)₂(PPh₃)MnC₅H₄Fe (CO)(PPh₃)C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)(PPh₃)C₅H₅.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2813–2815, December, 1977.     

Synthesen und Kristallstrukturen von [(t-Bu4Sb4)Fe(CO)4], [(t-Bu4Sb4)Mo(CO)5] und [(t-Bu3Sb4)Mo(η5-C5Me5)(CO)3]

Syntheses and Crystal Structures of [( t -Bu₄Sb₄)Fe(CO)₄], [( t -Bu₄Sb₄)Mo(CO)₅], and [( t -Bu₃Sb₄)Mo(η⁵-C₅Me₅)(CO)₃] t-Bu₄Sb₄ reacts with Fe₂(CO)₉ to form [(t-Bu₄Sb₄)Fe(CO)₄] ( 1 ). [(t-Bu₄Sb₄)Mo(CO)₅] ( 2 ) is formed from (thf)Mo(CO)₅ and t-Bu₄Sb₄. [(t-Bu₃Sb₄)Mo(η⁵-C₅Me₅)(CO)₃] ( 3 ) is a product of the reaction of t-Bu₄Sb₄ with [(η⁵-C₅Me₅)Mo(CO)₃]₂. The crystal structures of 1–3 are reported.     

Fluxional behavior of (CO)4Fe(u-AsMe2)Mo(CO)2(C5H5)

The ¹H and ¹³C NMR spectra of the heterobimetallic compound (CO)₄Fe(μ-AsMe₂)Mo(CO)₂(C₅H₅) reveal three different fluxional processes.     

Synthesis, spectral characteristics, and crystal structure of the hexanuclear complex MeSi[η1,η5-C5H4(CO)2Fe(η1,η5-C5H5)Mn(CO)3]3

The reaction of MeSiCl₃ with 3 equivalents of LiC₅H₄(CO)₂Fe(η¹,η⁵-C₅H₄)Mn(CO)₃ afforded the hexanuclear complex MeSi[η¹,η⁵-C₅H₄(CO)₂Fe(η¹,η⁵-C₅H₅)Mn(CO)₃]3. The structure of the resulting complex was established by¹H and¹³C NMR and IR spectroscopy and by X-ray diffraction analysis. Dedicated to the memory of Academician M. I. Kabachnik on his 90th birthday. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2056–2061, October, 1998.     

Synthesis and characterization of complexes η5,η5-(CO)3Mn(C5H4-C5H4)(CO)2Fe-η1,η5-C5H4Mn(CO)3 and μ-(C≡C)[C5H4(CO)2Fe-η1,η5-C5H4Mn(CO)3]2

The complex η⁵,η⁵-(CO)₃Mn(C₅H₄-C₅H₄)(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ was synthesized by the reaction of η⁵-Cp(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ with BuⁿLi (THF, ?78 °C) and then with anhydrous CuCl₂. The complex μ-(C≡C)[C₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃]₂ was prepared by the reaction of η⁵-IC₅H₄(CO)₂Fe-η¹,η⁵-C₅H₄Mn(CO)₃ with Me₃SnC≡CSnMe₃ (2:1) in the presence of Pd(MeCN)₂Cl₂.     

Improved preparation of h5-C5H5 Fe(CO)2(h1-alkyl) complexes from [h5-C5H5Fe(CO)2(h2-alkene)]+BF4−

Sodium cyanoborohydride has been found to be very effective for the conversion of [(h⁵-C₅H₅)Fe(CO)₂(h²-alkene)]⁺BF₄^? complexes to the corresponding h¹-alkyl derivatives.     

Fe3(CO)12 impregnated ZSM-5: Characterization and liquefaction activity

Deposition of Fe₃(CO)₁₂ on ZSM-5 is described for the synthesis of shape-selective, bifunctional coal conversion catalysts. The wt.% of Iron is varied from 1.6 to 21.1%. These Fe/ZSM-5 catalyst are characterized by surface sensitive and bulk experimental techniques. Variation in the site of iron incorporation and its chemical state are discussed relative to the iron loading. Reduction and calcination studies are reported describing growth of Iron crystallites and variation in Fe-zeolite Interactions as a function of treatment conditions. Activity data: for the synthesis gas-to-gasoline reaction are reported for representative catalysts. Variations in observed activity as a function of catalyst pretreatment are also presented.     

The photochemistry of thymidylyl-(3'-5')-5-methyl-2'-deoxycytidine in aqueous solution

The photochemistry of the dinucleoside monophosphate thymidylyl-(3'-5')-5-methyl-2'-deoxycytidine (Tpm5dC) has been studied in aqueous solution using both 254 nm and UV-B radiation. A variety of dinucleotide photoproducts containing 5-methylcytosine (m5C) have been isolated and characterized. These include two cyclobutane dimers (CBD) (the cis-syn [c,s]and trans-syn forms), a (6-4) adduct and its related Dewar isomer, and two isomers of a product in which the m5C moiety was converted into an acrylamidine. Small amounts of thymidylyl-(3'-5')-thymidine (TpT) were also formed, presumably as a secondary photoreaction product. In addition, a photoproduct was characterized in which the m5C moiety was lost, thus generating 3'-thymidylic acid esterified with 2'-deoxyribose at the 5-hydroxyl on the sugar moiety. The c,s CBD of Tpm5dC readily undergoes deamination to form the corresponding CBD of TpT. The kinetics of this deamination process has been studied; the corresponding enthalpy and entropy of activation for the reaction have been evaluated at pH 7.4 as being, respectively, 73.4 kJ/mol and -103.5 J/K mol. Deamination was not observed for the other characterized photoproducts of Tpm5dC.     

Stereoselective addition of CCl4 to 2S-methoxycarbonylN-(trans-cinnamoyl)pyrrolidine in the presence of Fe(CO)5 or Fe2(CO)9

Addition of CCl₄ to 2S-methoxycarbonyl-N-(trans-cinnamoyl)pyrrolidine in the presence of Fe(CO)₅ or Fe₂(CO)₉ results in predominant formation of one of four possible optical isomers of the adduct PhCHClCH(CCl₃)C(O)R (R=2S-methoxycarbonylpyrrolidyl).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1390–1392, July, 1995.     

Metal dimers as catalysts : III. The reaction between Fe(CO)5, and group V donor ligands in the presence of [(η5-C5H4R)Fe(CO)222]2 (R  H,Me) and [(η5-C5Me5)Fe(CO)2]2 as catalyst

The reaction between Fe(CO)₅, and group V donor ligands L, (L  PPh₃, AsPh₃, SbPh₃, PMePh₂, PMe₂Ph, Asme₂Ph, P(C₆H₁₁)₃, P(n-Bu)₃, P(i-Bu)₃, P(OPh)₃, P(OEt)₃, P(OMe)₃) in the presence of [(η⁵-C₅Me₅Fe(CO)₂]₂ (R  H, Me) or [(η⁵-C₅Me₅)Fe(CO)₂]₂ as catalyst in refluxing toluene, rapidly gives the complexes Fe(CO)₄L in yields > 85%. The reaction rate is essentially independent of the nature of L for [(η₅-C₅Me₅)Fe(CO)₂]₂ as catalyst. For the other catalysts, the rate is influenced predominantly by the steric properties of L. These results are interpreted in terms of the interaction between the catalyst and the ligand L to give derivatives of the type (η⁵-C₅H₄R)₂Fe₂,(CO)₃,(L). These derivatives were also found to catalyse the reaction between Fe(CO)₅, and L. The complexes [(η-C₅H₄R)Fe(CO)₂]₂ (R  H, Me) and [(η⁵-C₅Me₅)Fe(CO)₂]₂ also catalyse the reaction between Mn₂(CO)₁₀ and PPh₃ to give Mn₂(CO)₈- PPh₃)₂ in > 80% yield.     

Quantitative photochemistry of Cp'Pt(CH(3))(3) (Cp' = eta(5)-C(5)H(4)CH(3)) in solution: a highly efficient organometallic photoinitiator for hydrosilylation

The quantitative photochemistry of the platinum organometallic complex, Cp'Pt(CH(3))(3) (Cp' = eta(5)-C(5)H(4)CH(3)), has been investigated in methylcyclohexane and n-pentane solutions at 293 K following UV irradiation into the lowest lying absorption bands. Absolute photochemical quantum efficiency (phi(cr)) results obtained for Cp'Pt(CH(3))(3) at 313 and 366 nm reveal that the system very effectively photoreacts with phi(cr) = 0.34-0.41 in these solvents and 0.79-0.85 when 53 mM Et(3)SiH is incorporated. These photoefficiencies indicate that the quantitative photochemistry is 2 orders of magnitude higher than previously recognized. The application of Cp'Pt(CH(3))(3) as an effective photoinitiator for hydrosilylation reactions involving vinyl/hydride silicone mixtures is demonstrated.     

Solvent extraction of gold(III) with 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5

A simple, rapid and selective separation procedure of gold based on its extraction with 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5 has been developed. The dependence of the distribution ratio of gold on the pH of aqueous solutions, concentration of hydrochloric, nitric and perchloric acids and the organic solvents has been investigated. Decontamination factors for a number of metal ions with respect to gold are reported. Excellent separation of gold is obtained from many elements including noble metals. Citrate, cyanide, iodide, thiosulfate and thiourea completely mask gold, whereas oxalate does not interfere. Solutions of 1 M HCl, 0.2 M KCN, and the buffer of pH 0.8 readily strip gold from the organic phase. Some useful analytical applications of this procedure are discussed.