Molecularly imprinted polymers for the solid‐phase extraction of four fluoroquilones from milk and lake water samples

A method based on molecular crowding and ionic liquids as reaction solvents has been used for the synthesis of molecularly imprinted polymers. Levofloxacin was selected as the template, polymethyl methacrylate was the molecular crowding agent, and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (ionic liquid) was selected as the reaction solvent and porogen. The optimized proportion for the mixed porogen was dimethyl sulfoxide/ionic liquid/polymethyl methacrylate 1:1.6:5 in chloroform (150 mg mL^?1). The morphology and chemical composition of levofloxacin imprinted polymers were assessed by scanning electron microscopy and Fourier transform infrared spectroscopy. The absorption experiments demonstrated that the levofloxacin imprinted polymers possess high selective recognition property to levofloxacin and analogs, including enrofloxacin, ciprofloxacin and gatifloxacin, which all belong to fluoroquinolones. An extraction method using levofloxacin imprinted polymers as sorbent followed by high‐performance liquid chromatography analysis was optimized for the determination of four fluoroquinolones in milk and lake water samples. Under the optimized conditions, good linearity was observed in a range of 5–1000 ng g^?1 with the limit of detection between 0.3 and 0.5 ng g^?1 for the four fluoroquinolones. The recoveries at three spiked levels ranged 82.4–98.3% with the relative standard deviation ≤4.9.     

Synthesis and evaluation of dummy molecularly imprinted microspheres for the specific solid‐phase extraction of six anthraquinones from slimming tea

Dummy molecularly imprinted microspheres with danthron as template were synthesized and their performance was evaluated. Accelerated solvent extraction can rapidly and effectively remove template molecules from the microspheres. The microspheres were applied as a specific sorbent for solid‐phase extraction of six anthraquinones from slimming tea, showing excellent affinity and high selectivity to danthron and the target analytes. The molecular recognition mechanisms were discussed by the experimental validation with IR spectroscopy. The sample was treated using accelerated solvent extraction followed by dummy molecularly imprinted microspheres solid‐phase extraction. Under the optimized ultra high performance liquid chromatographic conditions, the six target analytes can be baseline separated in 8 min, and good linearity was obtained in a range of 0.1–40 μg/mL with the correlation coefficient (r²) of ≥0.9998. The method limit of quantification was in a range of 1–2 mg/kg, it can ensure analysis of anthraquinones at mg/kg level. The intra‐ and interday precision (RSD, n = 6) for the analysis of the six analytes in a slimming tea was less than 4.5 and 5.4%, respectively. The developed method can be applied for the selective extraction, effective separation, and rapid determination of six anthraquinones in slimming tea.     

Preparation of dummy‐imprinted polymers by Pickering emulsion polymerization for the selective determination of seven bisphenols from sediment samples

The dummy molecularly imprinted polymers were prepared by Pickering emulsion polymerization. 4,4′‐(1‐Phenylethylidene) bisphenol was selected as the dummy template to avoid the leakage of the target bisphenols. The microsphere particles were characterized by scanning electron microscopy and nitrogen adsorption–desorption measurements, demonstrating that the regular‐shaped and medium‐sized particles (40–70 μm) were obtained with a specific surface area of 355.759 m²/g and a total pore volume of 0.561 cm³/g. The molecular imprinting properties of the particles were evaluated by static adsorption and chromatographic evaluation experiments. The association constant and maximum adsorption amount of bisphenol A were 0.115 mmol/L and 3.327 μmol/g using Scatchard analysis. The microsphere particles were then used as a solid‐phase extraction sorbent for selective extraction of seven bisphenols. The method of dummy molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection was successfully established for the extraction and determination of seven bisphenols from environmental sediment samples with method detection limits of 0.6–1.1 ng/g. Good recoveries (75.5–105.2%) for sediment samples at two spiking levels (500 and 250 ng/g) and reproducibility (RSDs < 7.7%, n = 3) were obtained.     

Molecularly imprinted polymers for on-line preconcentration by solid phase extraction of pirimicarb in water samples

The synthesis and performance of a molecularly imprinted polymers (MIPs) as a selective solid phase extraction sorbent for the preconcentration of the carbamate pirimicarb from water samples is described. The MIP was prepared using pirimicarb as the template, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer, and using chloroform as the solvent. The detection of pirimicarb was carried out by differential pulse voltammetry (DPV) at a hanging mercury drop electrode (HMDE) in 0.1 mol l⁻¹ HCl. Solvents of different polarities were checked for the polymer synthesis, and different experimental variables (sample pH, selection of the eluent used, eluent volume, analyte and eluent flow rates and sample volume) associated with the rebinding/extraction process were optimised. For a 25 ml sample, the process took about 13 min and resulted in a nominal enrichment factor of 50 (eluent MeOH:H₂O:HAc, 7:2:1; 0.5 ml) for pirimicarb. A limit of detection of 4.1 μg l⁻¹ was obtained, and a good reproducibility of the measurements using different MIP microcolumns was found. Furthermore, the MIP selectivity was evaluated by checking several substances with similar and different molecular structures to that of pirimicarb. As an application, pirimicarb was determined in water samples of diverse origin which were spiked at a concentration level of 71.5 μg l⁻¹.     

Preparation of molecularly imprinted polymers for the selective recognition of the bioactive polyphenol, (E)-resveratrol

(E)-Resveratrol imprinted polymers have been rationally designed with the aid of molecular modelling and NMR spectroscopic titration techniques to determine the optimal ratio of the template to functional monomer for polymer formation. Based on this approach, (E)-resveratrol imprinted polymers were prepared via non-covalent self-assembly with the functional monomer 4-vinylpyridine (4VP) in a 1:3 molar ratio. Polymerisation in the presence of a cross-linker resulted in rigid block copolymers that had selective capacities towards (E)-resveratrol (e.g. 14 μmol/g) when compared to the non-imprinted reference polymer. The selectivity of these MIPs was also examined using several structurally related polyphenolic compounds to determine the influence of polyphenolic hydroxyl number and position on binding and molecular recognition.     

Hybrid molecularly imprinted polymers modified by deep eutectic solvents and ionic liquids with three templates for the rapid simultaneous purification of rutin,scoparone, and quercetin from Herba Artemisiae Scopariae

Different kinds of deep eutectic solvents based on choline chloride and ionic liquids based on 1‐methylimidazole were used to modify hybrid molecularly imprinted polymers with the monomer γ‐aminopropyltriethoxysilane‐methacrylic and three templates (rutin, scoparone, and quercetin). The materials were adopted as solid‐phase extraction packing agents, and were characterized by FTIR spectroscopy and field emission scanning electron microscopy. The hybrid molecularly imprinted polymers modified by deep eutectic solvents had high recoveries and a strong recognition of rutin, scoparone, and quercetin in Herba Artemisiae Scopariae than those modified by ionic liquids. In the procedure of solid‐phase extraction, deep eutectic solvents‐2‐hybrid molecularly imprinted polymers were obtained with the best recoveries with rutin (92.27%), scoparone (87.51%), and quercetin (80.02%), and the actual extraction yields of rutin (5.6 mg/g), scoparone (2.3 mg/g), and quercetin (3.4 mg/g). Overall, the proposed approach with the high affinity of hybrid molecularly imprinted polymers might offer a novel method for the purification of complex samples.     

Syntheses of molecularly imprinted polymers: Molecular recognition of cyproheptadine using original print molecules and azatadine as dummy templates

The use of custom-made polymeric materials with high selectivities as target molecules in solid-phase extraction (SPE), known as molecularly imprinted solid-phase extraction (MISPE), is becoming an increasingly important sample preparation technique. However, the potential risk of leakage of the imprinting molecules during the desorption phase has limited application. The use of a mimicking template, called a dummy molecular imprinting polymer (DMIP), that bears the structure of a related molecule and acts as a putative imprinting molecule may provide a useful solution to this problem.In the current study, cyproheptadine (CPH) and azatadine (AZA) were used as templates in the development of an MIP and DMIP for acrylic acid and methacrylic acid monomers. Our results indicate that DMIPs have equal recognition of CPH, avoiding the problem of leakage of original template during the desorption phase relative to MIPs synthesized in presence of the print molecule CPH. Examination of the surface structure of the two polymer products by SEM shows appreciable differences in structural morphology and function of the monomers employed. These results are well supplemented by data obtained for swelling ratios and solvent uptake. Molecular modelling of CPH and AZA suggests that both substrates are similar in shape and volume.     

Molecular imprinted polymers for separation science: A review of reviews

Molecular imprinted polymer is an artificial receptor made by imprinting molecules of a template in a polymer matrix followed by removing the template molecules via thorough washing to give the permanent template grooves. They show favored affinity to the template molecule compared to other molecules, and this property is the basic driving force for such diverse application of this techniques. Such techniques have been increasingly employed in a wide scope of applications such as chromatography, sample pretreatment, purification, catalysts, sensors, and drug delivery, etc., mostly in bioanalytical areas. A major part of them is related to development of new stationary phases and their application in chromatography and sample pretreatment. Embodiments of molecular imprinted polymer materials have been carried out in a variety of forms such as irregularly ground particles, regular spherical particles, nanoparticles, monoliths in a stainless steel or capillary column, open tubular layers in capillaries, surface attached thin layers, membranes, and composites, etc. There have been numerous review articles on molecular imprinted polymer issues. In this special review, the reviews in recent ca. 10 years will be categorized into several subgroups according to specified topics in separation science, and each review in each subgroup will be introduced in the order of date with brief summaries and comments on new developments and different scopes of prospects. Brief summaries of each categories and conclusive future perspectives are also given.     

Molecularly imprinted solid‐phase extraction coupled with ultra high performance liquid chromatography and fluorescence detection for the determination of estrogens and their metabolites in wastewater

Estrogens are an important class of endocrine‐disrupting compounds, and their contamination of environmental waters through the effluents of wastewater treatment plants could have an important impact on aquatic biota, even at low concentrations. For this reason, the development of selective and sensitive extraction methodologies, which permit the identification and quantification of these compounds at trace level concentrations, is very important. In this study, a quantitative method based on molecularly imprinted solid phase extraction coupled to ultra high performance liquid chromatography with fluorescence detection has been developed. It has been used for the simultaneous determination of three estrogens and two of their metabolites in water samples from wastewater treatment plants. The method developed presents satisfactory limits of detection (between 0.18 and 0.45 ng·mL^?1), good recoveries (higher than 60%) and low relative standard deviations (under 10%). The method was used to analyze wastewater from a veterinary hospital as well as influent and effluent samples of a wastewater treatment plant of Gran Canaria (Spain) The concentrations of the detected hormones ranged from 1.35 to 2.57 ng·mL^?1.     

Selective trace analysis of chloroacetamide herbicides in food samples using dummy molecularly imprinted solid phase extraction based on chemometrics and quantum chemistry

A methodology based on chemometrics and quantum chemistry was proposed to design and synthesize dummy molecularly imprinted polymers (DMIPs) capable of extracting chloroacetamide herbicides from food samples. Molecular modeling approach in conjunction with clustering analysis was used to predict the most suitable dummy template. Metolachlor deschloro was selected as the template to synthesize DMIPs, which were used as the solid phase extraction (SPE) materials. The selective adsorption of DMIPs was evaluated by high performance liquid chromatography (HPLC). The retention property of six chloroacetamide herbicides on DMIPs was also predicted using clustering analysis. The optimum loading, washing and eluting conditions for dummy molecularly imprinted solid phase extraction (DMISPE) were established to obtain high selectivity and sensitivity. Water, dichloromethane and methanol were chosen as loading, washing and elution solvent, respectively. Under optimized DMISPE conditions, recoveries of analytes were in the range of 83.4–106.7% with satisfactory precision (RSD% lower than 13%). Compared with other commercial SPE columns, DMISPE exhibited selective binding properties for chloroacetamide herbicides and the matrix effect was significantly decreased.     

Preparation of molecularly imprinted polymers based on magnetic nanoparticles for the selective extraction of protocatechuic acid from plant extracts

In this study, highly selective core–shell molecularly imprinted polymers on the surface of magnetic nanoparticles were prepared using protocatechuic acid as the template molecule. The resulting magnetic molecularly imprinted polymers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, and vibrating sample magnetometry. The binding performances of the prepared materials were evaluated by static and selective adsorption. The binding isotherms were obtained for protocatechuic acid and fitted by the Langmuir isotherm model and Freundlich isotherm model. Furthermore, the resulting materials were used as the solid‐phase extraction materials coupled to high‐performance liquid chromatography for the selective extraction and detection of protocatechuic acid from the extracts of Homalomena occulta and Cynomorium songaricum with the recoveries in the range 86.3–102.2%.     

Highly selective stir bar coated with dummy molecularly imprinted polymers for trace analysis of bisphenol A in milk

A water compatible molecularly imprinted polymers (MIPs) coated stir bar for bisphenol A(BPA) was prepared with 3,3',5,5'-tetrabromobisphenol A as the dummy template molecule in this study. The dummy molecularly imprinted polymers coated stir bar (DMIPs-SB) showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers when used to extract BPA and its three analogues. The saturated adsorption amount of the DMIPs coating was 3.0 times over that of the non-imprinted polymers coating. To achieve the optimum extraction performance, several parameters, including extraction and desorption time, pH value, adsorption temperature and stirring speed were investigated. The high-performance liquid chromatography combined with the DMIPs-SB was employed in the analysis of BPA in aqueous solution. The linear range of BPA concentration in aqueous medium was 0.0228-2.28 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 6.84 × 10(-3) ng/mL based on three times ratio of signal to noise. This method was directly applied to the determination of trace BPA in milk with satisfactory results.     

Molecularly imprinted polymers for sample preparation: A review

In spite of the huge development of analytical instrumentation during last two decades, sample preparation is still nowadays considered the bottleneck of the whole analytical process. In this regard, efforts have been conducted towards the improvement of the selectivity during extraction and/or subsequent clean-up of sample extracts. Molecularly imprinted polymers (MIPs) are stable polymers with molecular recognition abilities, provided by the presence of a template during their synthesis and thus are excellent materials to provide selectivity to sample preparation. In the present review, the use of MIPs in solid-phase extraction and solid-phase microextraction as well as its recent incorporation to other extraction techniques such as matrix-solid phase dispersion and stir bar sorptive extraction, among others, is described. The advantages and drawbacks of each methodology as well as the future expected trends are discussed.     

A novel superparamagnetic surface molecularly imprinted nanoparticle adopting dummy template: An efficient solid-phase extraction adsorbent for bisphenol A

Leakage of the residual template molecules is one of the biggest challenges for application of molecularly imprinted polymer (MIP) in solid-phase extraction (SPE). In this study, bisphenol F (BPF) was adopted as a dummy template to prepare MIP of bisphenol A (BPA) with a superparamagnetic core–shell nanoparticle as the supporter, aiming to avoid residual template leakage and to increase the efficiency of SPE. Characterization and test of the obtained products (called mag-DMIP beads) revealed that these novel nanoparticles not only had excellent magnetic property but also displayed high selectivity to the target molecule BPA. As mag-DMIP beads were adopted as the adsorbents of solid-phase extraction for detecting BPA in real water samples, the recoveries of spiked samples ranged from 84.7% to 93.8% with the limit of detection of 2.50 pg mL⁻¹, revealing that mag-DMIP beads were efficient SPE adsorbents.     

Magnetic molecularly imprinted polymers for recognition and enrichment of polysaccharides from seaweed

New magnetic molecularly imprinted polymers with two templates were fabricated for the recognition of polysaccharides (fucoidan and alginic acid) from seaweed by magnetic solid‐phase extraction, and the materials were modified by seven types of deep eutectic solvents. It was found that the deep eutectic solvents magnetic molecularly imprinted polymers showed stronger recognition and higher recoveries for fucoidan and alginic acid than magnetic molecularly imprinted polymers, and the deep eutectic solvents‐4‐magnetic molecularly imprinted polymers had the best effects. The practical recovery of the two polysaccharides (fucoidan and alginic acid) purified with deep eutectic solvents‐4‐magnetic molecular imprinted polymers in seaweed under the optimal conditions were 89.87, and 92.0%, respectively, and the actual amounts extracted were 20.6 and 18.7 μg/g, respectively. To sum up, the developed method proved to be a novel and promising method for the recognition of complex polysaccharide samples from seaweed.     

分子印迹聚合物固相萃取红椒粉中的苏丹红Ⅰ

本文以苏丹红Ⅰ为模板分子,以甲基丙烯酸(MAA)、4-乙烯基吡啶(4-VPy)为功能单体,制备了两种模板聚合物(MAA-MIP和4-VPy-MIP)。对4-VPy-MIP进行了Scatchard方程分析。分别以这两种模板聚合物为固相萃取材料来填充固相萃取柱,从掺有苏丹红Ⅰ的红椒粉中萃取苏丹红Ⅰ。本文优化了固相萃取条件。高效液相色谱检测表明,在合适的萃取条件下,采用填充4-VPy-MIP的固相萃取柱可以有效地从红椒粉中分离富集苏丹红Ⅰ。     

Selective recognition of sesamol using molecularly imprinted polymers containing magnetic wollastonite

The magnetic molecularly imprinted polymers (MMIPs) have been synthesized using piperonal molecules as dummy template and magnetic wollastonite composites as support. The resulting composites were applied to selective recognition of sesamol from aqueous solution. MMIPs were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) analysis, transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM). MMIPs were demonstrated with an imprinted polymer film (90-100 nm) and exhibited magnetic property (M(s) =8.60 emu/g) and thermal stability. The effective average diameter of the Fe(3) O(4) nanoparticles was about 10 nm and the thickness of magnetic film was about 160 nm. Batch mode adsorption studies were carried out to investigate the specific adsorption equilibrium, kinetics and selective recognition. The Langmuir isotherm model was fitted to the equilibrium data better than the Freundlich model, and the kinetic properties were well described by the pseudo-second-order equation. The value of E(a) in this study was 5.35 kJ/mol for MMIPs. In addition, the selective recognition experiments demonstrated that MMIPs have specific recognition ability toward sesamol.     

On‐line determination of sarcosine in biological fluids utilizing dummy molecularly imprinted polymers in microextraction by packed sorbent

Several years ago, sarcosine received attention as a prostate‐cancer marker. Prostate cancer is one of the most widespread types of tumor diseases in men. The prostate‐specific antigen is normally used as a marker, and it can only be detected in blood with a sensitivity of approximately 80%. In the present study, dummy molecularly imprinted polymers in microextraction by packed sorbent with on‐line liquid chromatography coupled to tandem mass spectrometry was used for the determination of sarcosine in human plasma and urine samples. The polymer network glycine was used for the dummy molecularly imprinted polymers. The selectivity of the method was evaluated using similar prostate‐cancer biomarkers. In addition, various parameters affecting the extraction performance were investigated. The method limits of detection and quantification in the plasma and urine were 1.0 and 3.0 ng/mL, respectively. The values of the coefficient of determination were over 0.99 for all runs in the studied concentration range (3.0–10 000 ng/mL). The method recovery was 87 and 89% in plasma and urine, respectively. The intraday and interday precisions of sarcosine in the plasma and urine samples were in the ranges of 4.0–7.1, 3.0–6.3, 2.9–4.7, and 5.0–6.7, respectively.     

Dummy molecularly imprinted polymers as the coating of stir bar for sorptive extraction of bisphenol A in tap water

A unique stir bar coated with dummy molecularly imprinted polymers for bisphenol A was prepared by sol-gel technique. The scanning electron microscopic image of the coating presented a homogeneous surface with a thickness of about 57 ± 2.5 μm. The Fourier transform infrared spectrum of the coating proved the incorporating of dummy molecularly imprinted polymers with the sol-gel network. When used to extract bisphenol A from aqueous solution containing bisphenol A and its three analogs (4-tert-butylphenol, 4,4'-dihydroxybiphenyl, and 3,3',5,5'-tetrabromo-bisphenol A). Dummy molecularly imprinted polymers-coated stir bar showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers. The extraction conditions including stirring speed, pH, and extraction time were optimized. After back extraction with methanol, the extracts were analyzed by high-performance liquid chromatography-fluorescence detection. The linear range was 0.0228-0.456 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 5.70 × 10(-3) ng/mL based on three times ratio of signal-to-noise. The method was applied to the determination of trace bisphenol A in tap water.     

Molecularly imprinted microspheres for the anticancer drug aminoglutethimide: Synthesis,characterization, and solid‐phase extraction applications in human urine samples

Molecularly imprinted microspheres (MIMs) for the anticancer drug aminoglutethimide (AG) were synthesized by aqueous suspension polymerization. The expected size and diameter of MIMs are controlled easily by changing one of the surfactant types, ratio of organic‐to‐water phase or stirring rate during polymerization. The obtained MIMs exhibit specific affinity toward AG with imprinting factor of 3.11 evaluated with a chromatographic model. The resultant MIMs were used as the SPE materials for the extraction of AG from human urine. A molecularly imprinted SPE (MISPE) method coupled with HPLC has been developed for the extraction and detection of AG in urine. Our results showed that most impurities from urine can be removed effectively after a washing step and the AG has been enriched effectively after MISPE operation with the recovery of >90% (n = 3). The developed MISPE–HPLC method could be used for enrichment and detection of AG in human urine.