A Comparison of One-Dimensional and Comprehensive Two-Dimensional Gas Chromatography for Decomposition Odour Profiling Using Inter-Year Replicate Field Trials

Decomposition odour analysis involves the chemical profiling of volatile organic compounds produced by decomposing remains. This is important for areas of forensic science that rely on the detection of decomposition odour such as insect attraction to carrion, positive alerts of cadaver dogs to decomposing remains, and the development of field instrumentation for search and recovery procedures. Traditionally decomposition odour analysis has been performed using gas chromatography–quadrupole mass spectrometry (GC–qMS); however, the use of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry (GC×GC–TOFMS) is rapidly becoming more prevalent. The objective of this study was to compare GC–qMS and GC×GC–TOFMS for decomposition odour profiling based on inter-year replicate field studies using decomposing porcine remains. The increased peak capacity, sensitivity and selectivity afforded by GC×GC–TOFMS allowed peak co-elutions, chromatographic artefacts, and dynamic range to be more easily addressed and managed. Furthermore, the software associated with GC×GC–TOFMS provided several additional benefits including improved peak alignment between samples and increased consistency of reported results, overall allowing for additional statistical tests to be applied following data processing. Future GC–qMS results could be improved by implementing some of these software-associated procedures, potentially reducing the magnitude of variation observed between GC–qMS and GC×GC–TOFMS studies. One-dimensional GC analysis may also benefit substantially from coupling with TOFMS detection to provide an indirect increase in peak capacity using deconvolution. However, the wealth of information gained by using GC×GC–TOFMS in decomposition odour profiling is undoubtedly an asset in this field of research.

     

Evaluation of needle trap micro‐extraction and solid‐phase micro‐extraction: Obtaining comprehensive information on volatile emissions from in vitro cultures

Volatile organic compounds (VOCs) emitted from in vitro cultures may reveal information on species and metabolism. Owing to low nmol L⁻¹ concentration ranges, pre‐concentration techniques are required for gas chromatography–mass spectrometry (GC–MS) based analyses. This study was intended to compare the efficiency of established micro‐extraction techniques – solid‐phase micro‐extraction (SPME) and needle‐trap micro‐extraction (NTME) – for the analysis of complex VOC patterns. For SPME, a 75 μm Carboxen®/polydimethylsiloxane fiber was used. The NTME needle was packed with divinylbenzene, Carbopack X and Carboxen 1000. The headspace was sampled bi‐directionally. Seventy‐two VOCs were calibrated by reference standard mixtures in the range of 0.041–62.24 nmol L⁻¹ by means of GC–MS. Both pre‐concentration methods were applied to profile VOCs from cultures of Mycobacterium avium ssp. paratuberculosis. Limits of detection ranged from 0.004 to 3.93 nmol L⁻¹ (median = 0.030 nmol L⁻¹) for NTME and from 0.001 to 5.684 nmol L⁻¹ (median = 0.043 nmol L⁻¹) for SPME. NTME showed advantages in assessing polar compounds such as alcohols. SPME showed advantages in reproducibility but disadvantages in sensitivity for N‐containing compounds. Micro‐extraction techniques such as SPME and NTME are well suited for trace VOC profiling over cultures if the limitations of each technique is taken into account.     

Metabolite analysis in Curcuma domestica using various GC‐MS and LC‐MS separation and detection techniques

The metabolic profile of polar (methanol) and non‐polar (hexane) extracts of Curcuma domestica, a widely used medicinal plant, was established using various different analytical techniques, including GC‐FID, GC‐MS, HR‐GC‐MS and analytical HPLC‐ESI‐MS/MS by means of LTQ‐Orbitrap technology. The major non‐volatile curcuminoids curcumin, demethoxycurcumin and bisdemethoxycurcumin were identified when their chromatographic and precursor ion masses were compared with those of authentic standard compounds. In this paper we describe for the first time a GC/MS‐based method for metabolic profiling of the hydrophilic extract. We also identified 61 polar metabolites as TMS derivatives. Copyright © 2009 John Wiley & Sons, Ltd.     

Sorption study of 25 volatile organic compounds in several Mediterranean soils using headspace-gas chromatography-mass spectrometry

A sorption study of 25 volatile organic compounds (VOCs) in different agricultural soils was carried out by using headspace-gas chromatography-mass spectrometry. The extraction of the VOCs from soil samples was carried out following the EPA method with some differences such as addition of potassium chloride and different instrumental conditions which provide higher sample throughput. In addition, a complementary study on several procedures for soil fortification with VOCs was also assayed, fortification with minimal sample handling was selected in order to minimise evaporation losses of the VOCs. The effect of clay minerals (7.0-69.7%) and organic carbon (0.2-3.5%) contents on acid and alkaline (pH 5.3-8.8) soils were evaluated. Based on the results, all compounds assayed were more sorbed in alkaline soils than acid ones; chlorobenzenes interact more strongly with agricultural soils than do alkylbenzenes. The organic carbon content affects the sorption of 25 VOCs in alkaline soils (the highest sorption was found for the most organic soil), while in acid soils VOC sorption increases as the organic carbon content decreases. The clay mineral fraction plays an important role in the sorption of VOCs in acid soil owing to pi-/n-electron interactions, this effect being more marked for chlorobenzenes.     

1H‐HRMAS NMR study of cold smoked Atlantic salmon (Salmo salar) treated with E‐beam

¹H High resolution magic angle spinning (HRMAS) NMR spectroscopic data in combination with principal components analysis and analysis of variance were used to differentiate between irradiated and non‐irradiated cold‐smoked Atlantic salmon (Salmo salar). NMR profiling was obtained, with a spectral acquisition time of less than 8 min, from a small sample size of intact white salmon muscle, by non‐destructive analysis that includes a very simple and rapid sample preparation step. Results obtained enable the use of creatine, trimethylamine oxide and the sum of phosphorylcholine and glycerophosphorylcholine as diagnostic compounds to detect irradiation treatment. This study shows the potential of ¹H‐HRMAS to be a rapid method for investigating compositional changes due to food processing as well as to confirm the presence or absence of some bioactive compounds in irradiated samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimal preparation methods for automated matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry profiling of low molecular weight proteins and peptides

Mass spectrometry (MS) profiling of the proteome and peptidome for disease‐associated patterns is a new concept in clinical diagnostics. The technique, however, is highly sensitive to external sources of variation leading to potentially unacceptable numbers of false positive and false negative results. Before MS profiling can be confidently implemented in a medical setting, standard experimental methods must be developed that minimize technical variance. Past studies of variance have focused largely on pre‐analytical variation (i.e., sample collection, handling, etc.). Here, we examined how factors at the analytical stage including the matrix and solid‐phase extraction influence MS profiling. Firstly, a standard peptide/protein sample was measured automatically by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) MS across five consecutive days using two different preparation methods, dried droplet and sample/matrix, of four types of matrix: α‐cyano‐4‐hydroxycinnamic acid (HCCA), sinapinic acid (SA), 2,5‐dihydroxybenzoic acid (DHB) and 2,5‐dihydroxyacetophenone (DHAP). The results indicated that the matrix preparation greatly influenced a number of key parameters of the spectra including repeatability (within‐day variability), reproducibility (inter‐day variability), resolution, signal strength, background intensity and detectability. Secondly, an investigation into the variance associated with C8 magnetic bead extraction of the standard sample prior to automated MS profiling demonstrated that the process did not adversely affect these same parameters. In fact, the spectra were generally more robust following extraction. Thirdly, the best performing matrix preparations were evaluated using C8 magnetic bead extracted human plasma. We conclude that the DHAP prepared according to the dried‐droplet method is the most appropriate matrix to use when performing automated MS profiling. Copyright © 2009 John Wiley & Sons, Ltd.     

Temperature‐dependent release of volatile organic compounds of eucalypts by direct analysis in real time (DART) mass spectrometry

A method is described for the rapid identification of biogenic, volatile organic compounds (VOCs) emitted by plants, including the analysis of the temperature dependence of those emissions. Direct analysis in real time (DART) enabled ionization of VOCs from stem and leaf of several eucalyptus species including E. cinerea, E. citriodora, E. nicholii and E. sideroxylon. Plant tissues were placed directly in the gap between the DART ionization source skimmer and the capillary inlet of the time‐of‐flight (TOF) mass spectrometer. Temperature‐dependent emission of VOCs was achieved by adjusting the temperature of the helium gas into the DART ionization source at 50, 100, 200 and 300°C, which enabled direct evaporation of compounds, up to the onset of pyrolysis of plant fibres (i.e. cellulose and lignin). Accurate mass measurements facilitated by TOF mass spectrometry provided elemental compositions for the VOCs. A wide range of compounds was detected from simple organic compounds (i.e. methanol and acetone) to a series of monoterpenes (i.e. pinene, camphene, cymene, eucalyptol) common to many plant species, as well as several less abundant sesquiterpenes and flavonoids (i.e. naringenin, spathulenol, eucalyptin) with antioxidant and antimicrobial properties. The leaf and stem tissues for all four eucalypt species showed similar compounds. The relative abundances of methanol and ethanol were greater in stem wood than in leaf tissue suggesting that DART could be used to investigate the tissue‐specific transport and emissions of VOCs. Copyright © 2009 John Wiley & Sons, Ltd.     

Emission of volatile sesquiterpenes and monoterpenes in grapevine genotypes following Plasmopara viticola inoculation in vitro

The grapevine (Vitis vinifera) is one of the most widely cultivated fruit crops globally, and one of its most important diseases in terms of economic losses is downy mildew, caused by Plasmopara viticola. Several wild Vitis species have been found to be resistant to this pathogen and have been used in breeding programs to introduce resistance traits to susceptible cultivars. Plant defense is based on different mechanisms, and volatile organic compounds (VOCs) play a major role in the response to insects and pathogens. Although grapevine resistance mechanisms and the production of secondary metabolites have been widely characterized in resistant genotypes, the emission of VOCs has not yet been investigated following P. viticola inoculation. A Proton Transfer Reaction‐Time of Flight‐Mass Spectrometer (PTR‐ToF‐MS) was used to analyze the VOCs emitted by in vitro‐grown plants of grapevine genotypes with different levels of resistance. Downy mildew inoculation significantly increased the emission of monoterpenes and sesquiterpenes by the resistant SO4 and Kober 5BB genotypes, but not by the susceptible V. vinifera Pinot noir. Volatile terpenes were implicated in plant defense responses against pathogens, suggesting that they could play a major role in the resistance against downy mildew by direct toxicity or by inducing grapevine resistance. The grapevine genotypes differed in terms of the VOC emission pattern of both inoculated and uninoculated plants, indicating that PTR‐ToF‐MS could be used to screen hybrids with different levels of downy mildew resistance. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous determination of residues of metalaxyl,cyazofamid and a cyazofamid metabolite in tobacco leaves and soil by liquid chromatography with tandem mass spectrometry

A simple method was developed and validated for the simultaneous determination of metalaxyl, cyazofamid and the cyazofamid metabolite 4‐chloro‐5‐p‐tolylimidazole‐2‐carbonitrile (CCIM) by liquid chromatography with tandem mass spectrometry. The three target compounds were extracted from tobacco and soil with acetonitrile containing 0.1% acetic acid, and the extracts were purified using octadecylsilane. The proposed method showed satisfactory linearity (R² ≥ 0.9985) for the target compounds. The limits of detection for metalaxyl, cyazofamid and CCIM were 0.006, 0.06 and 0.06 mg/kg in soil and green tobacco leaves and 0.03, 0.3 and 0.3 mg/kg in cured tobacco leaves, respectively. The limits of quantification for metalaxyl, cyazofamid and CCIM were 0.02, 0.2 and 0.2 mg/kg in soil and green tobacco leaves and 0.1, 1 and 1 mg/kg in cured tobacco leaves, respectively. The average recoveries from soil and tobacco were 72.91–98.40% for metalaxyl, 76.73–105.80% for cyazofamid and 74.48–106.45% for CCIM. The relative standard deviation range was 1.23–6.99%. The developed method was successfully applied to analysis of residues of metalaxyl, cyazofamid and CCIM in real soil and tobacco samples. The results indicated that the established method could meet the requirement for the analysis of trace amounts of all three analytes in soil and tobacco.     

Screening and isolation of cyclooxygenase‐2 inhibitors from the stem bark of Phellodendron amurense Ruprecht by ultrafiltration with liquid chromatography and tandem mass spectrometry,and complex chromatography

Nonsteroidal anti‐inflammatory drugs appear to reduce the risk of developing cancer. One mechanism through which nonsteroidal anti‐inflammatory drugs act to prevent carcinogenesis is inhibition of the activity of the enzyme cyclooxygenase‐2. The cyclooxygenase‐2 inhibitors are widely used to reduce the risk of developing cancer. Natural products are considered to be a promising source of several novel cyclooxygenase‐2 inhibitors. Ultrafiltration with liquid chromatography and mass spectrometry is an efficient method that can be applied to rapidly screen and identify the ligands from the barks of Phellodendron amurense Ruprecht. A continuous online method comprised of pressurized liquid extraction, countercurrent chromatography, and semi‐preparative liquid chromatography was developed for the efficient scaled‐up production of eight compounds with high purities. The bioactivities of the separated compounds were assessed by an in vitro enzyme inhibition assay. The use of bioactivity screening method combined with preparation method of bioactive compounds and an in vitro enzyme inhibition assay facilitated the efficient screening and isolation of the cyclooxygenase‐2 inhibitors from complex samples. This could be used as an efficient method for the large‐scale production of functional ingredients.     

Analysis of volatile organic compounds released from the decay of surrogate human models simulating victims of collapsed buildings by thermal desorption–comprehensive two-dimensional gas chromatography–time of flight mass spectrometry

Field experiments were devised to mimic the entrapment conditions under the rubble of collapsed buildings aiming to investigate the evolution of volatile organic compounds (VOCs) during the early dead body decomposition stage. Three pig carcasses were placed inside concrete tunnels of a search and rescue (SAR) operational field terrain for simulating the entrapment environment after a building collapse. The experimental campaign employed both laboratory and on-site analytical methods running in parallel. The current work focuses only on the results of the laboratory method using thermal desorption coupled to comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (TD-GC × GC-TOF MS). The flow-modulated TD-GC × GC-TOF MS provided enhanced separation of the VOC profile and served as a reference method for the evaluation of the on-site analytical methods in the current experimental campaign. Bespoke software was used to deconvolve the VOC profile to extract as much information as possible into peak lists. In total, 288 unique VOCs were identified (i.e., not found in blank samples). The majority were aliphatics (172), aromatics (25) and nitrogen compounds (19), followed by ketones (17), esters (13), alcohols (12), aldehydes (11), sulfur (9), miscellaneous (8) and acid compounds (2). The TD-GC × GC-TOF MS proved to be a sensitive and powerful system for resolving the chemical puzzle of above-ground “scent of death”.     

Joint MS‐based platforms for comprehensive comparison of rat plasma and serum metabolic profiling

Metabolomics is a rapidly growing field in the comprehensive understanding of cellular and organism‐specific responses associated with perturbations induced by medicines, chemicals and environment. Blood matrices are frequently used in clinical and biological studies. In this study, we compared metabolic profiling between rat plasma and serum using complementary platforms of gas chromatography–mass spectrometry (GC‐MS) and liquid chromatography–quadruple time‐of‐flight–mass spectrometry (LC‐QTOF‐MS). The sample types that were tested included plasma prepared with K₂EDTA and serum collected using venous blood collection protocols. The results of peak area variation for each detected metabolite/feature in the quality control samples showed a good reproducibility in LC‐QTOF‐MS and better reproducibility in GC‐MS. In GC‐MS analysis: (a) 25.8% of the defined metabolites differed serum from plasma profiling (t‐test, p < 0.05); and (b) serum possessed higher sensitivity than plasma for its generally higher peak intensity in the metabolic profiling. In LC‐QTOF‐MS analysis, 13 (in positive ion mode) and seven (in negative ion mode) important metabolites were identified as mainly contributing to the separation between serum and plasma. Copyright © 2014 John Wiley & Sons, Ltd.     

Analytical bias among different gas chromatographic approaches using standard BTX gases and exhaust samples

In this study, the analytical compatibility of the gas chromatographic (GC) approach was evaluated through a cross‐calibration exercise. To this end, three aromatic volatile organic compounds (VOCs: benzene, toluene, and p‐xylene (BTX)) were simultaneously analyzed with four individual instrumental setups (type I = GC with MS plus solid phase microextraction (SPME) method, II = GC with flame ionization detection (FID) plus SPME, III = fast GC‐FID plus SPME, and IV = GC‐FID plus air server/thermal desorption (AS/TD) method). A comparison of basic quality assurance (QA) data revealed considerable differences in DL values among the methods with moderate variabilities in the intercompound sensitivity. In light of the differences in detection properties, the analytical bias involved for each methodological approach was assessed by the relative relationship between analytes and basic operating conditions. The results suggest that the analysis of environmental samples at ultra‐low concentration levels (at or below ppb level) can be subject to diverse sources of bias. Although detection properties of target compounds seem to be affected by the combined effects of various factors, changes in the sample concentration levels were seen to be the most consistent under the experimental setups analyzed in this study.     

Discrimination between 2AP producing and non‐producing rice rhizobacterial isolates using volatile profiling: a chemometric approach

2‐Acetyl‐1‐pyrroline (2AP) is known as a principal basmati aroma compound. The present study aims at discriminating rhizobacteria isolated from soils cultivated with basmati and non‐basmati rice for long duration. Volatile profiling was used as marker to discriminate the rhizobacterial isolates. Quantification of 2AP and other volatile compounds (VCs) produced by rhizobacteria was undertaken using HS‐SPME coupled with GC‐MS. Chemometrics tools such as hierarchical cluster analysis (HCA), principle component analysis (PCA) and multi dimensional scaling (MDS) were applied for volatile profiling of different isolates. Results showed significant discrimination of all 2AP producing (AP‐P) and non‐producing rhizobacterial isolates (AP‐NP) on the basis of their VC profile. This was validated by bacterial identification data as well. The frequency distribution for 2AP levels indicates that basmati isolates had higher frequency for 2AP production as compared to non‐basmati control. AP‐P and AP‐NP isolates have different VC profiling pattern irrespective of their origin. These isolates were found belonging to different groups when identified using 16S rDNA sequencing data. Chemometric analysis (PCA, HCA and MDS) helped to identify volatiles, which could be used as biomarker in discriminating the AP‐P and AP‐NP isolates. VC pattern of rhizobacteria could be used as volatile markers to distinguish between AP‐P and AP‐NP rhizobacterial isolates. Copyright © 2015 John Wiley & Sons, Ltd.     

On‐line process monitoring of coffee roasting by resonant laser ionisation time‐of‐flight mass spectrometry: bridging the gap from industrial batch roasting to flavour formation inside an individual coffee bean

Resonance‐enhanced multiphoton ionisation time‐of‐flight mass spectrometry (REMPI‐TOFMS) enables the fast and sensitive on‐line monitoring of volatile organic compounds (VOC) formed during coffee roasting. On the one hand, REMPI‐TOFMS was applied to monitor roasting gases of an industrial roaster (1500 kg/h capacity), with the aim of determining the roast degree in real‐time from the transient chemical signature of VOCs. On the other hand, a previously developed μ‐probe sampling device was used to analyse roasting gases from individual coffee beans. The aim was to explore fundamental processes at the individual bean level and link these to phenomena at the batch level. The pioneering single‐bean experiments were conducted in two configurations: (1) VOCs formed inside a bean were sampled in situ, i.e. via a drilled μ‐hole, from the interior, using a μ‐probe (inside). (2) VOCs were sampled on‐line in close vicinity of a single coffee bean's surface (outside). The focus was on VOCs originating from hydrolysis and pyrolytic degradation of chlorogenic acids, like feruloyl quinic acid and caffeoyl quinic acid. The single bean experiments revealed interesting phenomena. First, differences in time–intensity profiles between inside versus outside (time shift of maximum) were observed and tentatively linked to the permeability of the bean's cell walls material. Second, sharp bursts of some VOCs were observed, while others did exhibit smooth release curves. It is believed that these reflect a direct observation of bean popping during roasting. Finally, discrimination between Coffea arabica and Coffea canephora was demonstrated based on high‐mass volatile markers, exclusively present in spectra of Coffea arabica. Copyright © 2013 John Wiley & Sons, Ltd.     

Selective and Efficient Formylation of Indoles (C3) and Pyrroles (C2) Using 2,4,6‐Trichloro‐1,3,5‐Triazine/Dimethylformamide (TCT/DMF) Mixed Reagent

This study introduces an efficient method for the selective formylation of indoles and pyrroles at the positions of C(3) and C(2), respectively. The mixture of three equivalents of N ,N‐dimethylformamide and one equivalent of 2,4,6‐trichloro‐1,3,5‐triazine (cyanuric chloride) generates an easy handling formylating agent for the efficient formylation of these classes of compounds to give the corresponding aldehydes under mild reaction conditions. This procedure was highly efficient, and a range of formylated indoles and pyrroles were obtained in good to excellent yields.     

Synthesis and Antiproliferative Activity of 6‐Ferrocenyl‐3‐Substituted 7H‐1,2,4‐Triazolo[3, 4‐b]‐1,3,4‐Thiadiazines

Five new 6‐ferrocenyl‐3‐substituted 7H‐1,2,4‐triazolo[3, 4‐b]‐1,3,4‐thiadiazines ( 3a‐e ) have been synthesized and characterized on the basis of elemental analyses and spectral data. The antiproliferative activities were examined in two human cell lines (BJ and HT 1080) with the acid phosphatase assay. The results showed that all compounds could reduce cell viability. The significant difference between the two cell lines was that fibrosarcoma HT 1080 cells could indeed be more susceptible to the compounds than the normal fibroblast BJ cells.     

Theoretical study of the thermolysis reaction of β‐hydroxynitriles in the gas phase

The gas‐phase thermal decomposition of 3‐hydroxypropionitrile, 3‐hydroxybutyronitrile, and 3‐hydroxy‐3‐methylbutyronitrile has been studied at the MP2/6‐31G(d) level of theory at 683.15 K and 0.06 atm. Results based both in energy and structure data seem to indicate a favorable route of decomposition via a six‐membered cyclic transition state (similar to those suggested for thermal decomposition of other related compounds, such as β‐hydroxyketones, β‐hydroxyalkenes, and β‐hydroxyalkynes) rather than a four‐membered cyclic transition state or even a quasiheterolytic pathway. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Stability and degradation products of imipenem applying high‐resolution mass spectrometry: An analytical study focused on solutions for infusion

Carbapenems show recognized instability in aqueous solutions; therefore some care must be taken in their handling and preparation and their use in the hospital environment. The stability and degradation products of imipenem were investigated from conditions that simulate its clinical use. For this, a simple stability‐indicating method by HPLC‐DAD was validated with a focus on the quantitation of drug concentration remaining from infusion solutions (sodium chloride 0.9% and glucose 5%). The degradation products formed were identified by high‐resolution mass spectrometry (ESI‐Q‐TOF‐MS/MS), with detection of the [M + H]⁺ ions at m/z 318 (DP‐1), m/z 599 (DP‐2) and m/z 658 (DP‐3). The most probable elemental compositions were obtained with a high degree of confidence, where the error between the masses observed and calculated was 1.25 ppm for DP‐1, ?0.33 ppm for DP‐2 and 1.82 ppm for DP‐3. The DP‐1 degradation product resulted from cleavage of the β‐lactam ring; DP‐2 corresponded to the drug dimer; and DP‐3 was generated from the interaction between imipenem and cilastatin. The proposed method provides a safe and reliable alternative for the quantitation of imipenem, and the stability data obtained by ESI‐Q‐TOF help in understanding the drug behavior under the conditions of clinical use.     

Surface analytical approaches to reliably characterize lithium ion battery electrodes

Active Li‐ion battery materials are typically characterized using X‐ray photoelectron spectroscopy when regarding chemical state elucidation. This work presents a multiplet‐splitting approach comprising in minimum 3 third‐row transition metals, namely, Mn, Co, and Ni, to improve the results in comparison to peak barycenter or single symmetric Voigt profile approaches. The achieved X‐ray photoelectron spectroscopy 2p templates in particular address the complex peak structures consisting of significant photoelectron multiplet splitting, shake‐up and plasmon loss features, and additional Auger and photoelectron overlaps, inevitable also for a reliable quantification. To separate from topography effects and contributions of the electrode's binder and conductive carbon in powder electrodes, the developed procedure in a first attempt was successfully transferred to novel radio frequency magnetron sputtered Li‐Ni‐Co‐Mn‐O thin films, designed for all‐solid‐state Li‐ion batteries. In all cases, special care was taken with respect to air sensitivity, contamination during sample handling, and probable method induced sample decomposition.